Used Edge Deburring Machine for sale (92,251)

Condition: ready for operation (used), Chamfering machine FS500 Schallberger Technical data: 1200-8000 rpm, chamfer angle 45°, micrometer screw adjustable 0-5 mm, connection 230V, 50 Hz, weight 47 kg. Machine includes base cabinet and extraction unit. Dkedoxtt H Uepfx Ahujw

Condition: used, Edge beveling machine, edge milling machine ACKERMANN & SCHMITT Type ZL 1104 Edge breaking machine, deburring machine, edge deburring device For aluminum and plastic processing and small chamfers on steel. Year of manufacture: approx. 1995 Chamfer size: 0-4 mm Chamfer angle: 45° Cutter head: Ø approx. 40 mm Material support: 90° x 400 mm Speed: 4500 rpm Motor power: 700 watts Dksdpexcbmujfx Ahusw Power supply: 220 volts, 50 Hz - Infinitely adjustable chamfer size, 0-4 mm - Built-in milling cutter with carbide indexable inserts - Milling motor with 8 mm collet chuck - Workpiece support 90° - Workpiece support mount defective, needs repair - Motor runs well Net weight: 3 kg

Condition: good (used), Year of construction: 2006, functionality: fully functional, PRAWEMA 2005 204 HS-W Dkedpfxovm Efaj Ahusw PRAWEMA 2006 SYNCHROFINE 205 HS

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, working width: 1,060 mm, Multiple operations in one pass: deburring, rounding, oxide removal, metal slag removal ... Abrasive belt aggregate (K) TopBrush aggregate (4PTB) Working width: 1060 mm Dodpfx Ajr Iydgehuokw Fast throughput: rounding at 4 m/min Operator-friendly operation via touch screen. Ex showroom machine!

Condition: used, Year of construction: 2016, Working hours machine: 5320 h max. working width: 300 mm workable material thickness: 1-15 mm Tension: 400V / 50 Hz Total power: 13,5 A Total current consumption: 7,5 kW Insulation class: IP42 Infinitely variable feed speed: 0-2 m / min Length: 2600 mm Dodpjv N I Hljfx Ahuskw Width: 2300 mm Height: 1300 mm Machine weight: 1900 kg Standard configuration - With a magnetic table designed for part dimensions of 25 x 25 x 1 mm up to maximum 200 x 200 x15 mm (geometry-dependent)- With vacuum table for part dimensions of 45 x 45 x 1 mm up to maximum 200 x 200 x15 mm (geometry-dependent)- Time consuming turn-over of parts with a second pass is not necessary- Swinging away of the innovative turning station makes it possible to deburr parts longer than 200 mm- A higher level of automation ensures an economic and reliable deburring process, also for large quantities of parts- A high and sustainable deburring quality.- Dry deburring process (no chemical additives as used in tumblers)- Small parts are returned to the front of the machine and gathered in a box. No extra walking back and forth for the operator.- Energy-efficient- The deburring process ensures an even wear of the belt and brushes across the entire width of the machine- Fast and simple tool Change- Simple and intuitive operation of the machine- Modern, compact machine design Extended machine accessories

Condition: used, Year of construction: 2016, operating hours: 851 h, functionality: fully functional, machine/vehicle number: MN25724, working width: 1,500 mm, feed rate X-axis: 4 m/min, type of input current: three-phase, sheet thickness (max.): 50 mm, total length: 1,300 mm, total width: 2,600 mm, total height: 2,500 mm, overall weight: 2,600 kg, working height: 950 mm, workpiece height (max.): 50 mm, workpiece width (max.): 1,500 mm, The ER 1500 E is a deburring machine working from above on one side with the EdgeRacer carousel for precise processing of inner and outer contours with user-defined edge rounding. The EdgeRacer ER 1500 E offers a high throughput rate of more than 300 m²/h, surface-friendly processing - even with polished, brushed and foil-coated sheets - and reproducible results. Thanks to the roller conveyor of the EdgeRacer ER 1500 E, the sanding heads can also be fed below roller table level. The roller transport also ensures maximum energy efficiency - the processing costs are usually less than €0.01 per square meter of processed sheet metal. Thanks to the reversing operation, the sheets to be processed can be inserted and removed on the infeed side. Purchase the EdgeRacer deburring machine ER 1500 E as a demonstration machine with only 851 operating hours directly from the manufacturer. Djdpfx Ahoucw Dzoujkw

Condition: new, Year of construction: 2023, functionality: fully functional, working width: 1,500 mm, feed rate X-axis: 4 m/min, type of input current: three-phase, sheet thickness (max.): 102 mm, total length: 2,300 mm, total width: 2,600 mm, total height: 2,500 mm, overall weight: 4,000 kg, working height: 950 mm, workpiece length (max.): 102 mm, Deburring on both sides in just one pass - of course with 100% reproducible results and precise processing of the inside and outside edges - only the EdgeRacer 1500 D offers you this. Dkjdpfx Aoucw Rbohusw The double-sided deburring EdgeRacer 1500 D is the right choice for precise double-sided deburring and edge rounding. In addition to flat sheets, it can also process sheets with beads, notches, thread pull-throughs and the like. The maximum component height is 102 mm. The infeed of the brushes working from above and below can be set independently of each other. Thanks to the roller conveyor, the infeed can also be below or above roller table level.

Condition: good (used), functionality: fully functional, 1st station: deburring of sheet metal edges, 2nd station: deburring of notches and outer radii, with VA brushes; maximum sheet thickness: 5 mm Dkodpjxmi Saofx Ahujw

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: T/41242, workpiece height (max.): 52 mm, edge thickness (max.): 12 mm, working height: 880 mm, empty load weight: 3,000 kg, throughput speed: 233 mm/s, TECHNICAL DETAILS Operating Method: Single-sided, right-hand operation Edge Thickness: 0.2 – 12 mm Workpiece Dimensions Minimum Width: 70 mm Minimum Height: 8 mm Maximum Height: 52 mm Minimum Length: 150 mm Feed Speed: 10 – 14 m/min Working Height: 880 mm MACHINE DETAILS Processing Units Jointing Section with 2 HF motors, 1.5 kW Double End Trimming Unit with 2 HF motors, 0.3 kW Flush Milling Unit with 2 HF motors, 0.7 kW Fine Chamfer Mill with 2 HF motors, 0.3 kW Fine Radius Mill with 2 HF motors, 0.3 kW Corner Rounding Unit with 2 motors, 0.35 kW Scraper Unit for Plastic Edges Dimensions & Weight Machine Dimensions (L x W x H): 6,120 x 840 x 1,385 mm Machine Weight: 3,000 kg Dodpextfchofx Ahuokw Operating Voltage: 400 V, 50 Hz Total Connected Load: 12 kW Electrical Connection: 3 x 400 V, 5 x 6 mm², fuse 35 A EQUIPMENT Double roller top pressure with electronic positioning Automatic coil magazine for rolls up to 800 mm diameter with pneumatic cut-off device for up to 3 mm thickness Automatic edge magazine with optical monitoring for fixed-length edge strips Infeed fence with automatic positioning after inputting the jointing value CM - CombiMelt - Modular glue application system Control system via 7-inch TFT color touch display 100 freely alphanumeric storable work programs PLC for high-resolution track control Individual frequency inverters for separate activation of processing motors Hole detection system for skipping CNC processing Network capability for integration into a data network

Condition: excellent (used), functionality: fully functional, Used Fintec 130 Sheet Metal Corner Linishing Sanding / Finishing Machine For sale Dsdpfx Aswbhtnehuekw With Spare Belts Ideal for sheet metal boxes

Condition: excellent (used), Year of construction: 2012, Brand KDF110 Optimat Ambition - only 1150 hours Brand: Brandt Model: KDF 110 Year of manufacture: 2012 M-Nr.: 0-261-20-6960 Control system: Easy Control 10+ contactless line control, feed-regulated with start-stop optical-indicative sensors Display: LCD, 4 x 20 characters, 4 program memory slots Configuration: Chain conveyor feed: Standard equipment with central lubrication for the transport chain. Top pressure rollers / product guidance: Central control, 2 roller tracks Jointing milling unit: 2 x 0.75 kW, 200 Hz including jointing cutter set in DIA version with manual positioning via Siko counter, max. 3 mm removal and max. 40 mm workpiece thickness Gluing unit: A3 gluing station for hotmelt glue with option for PU application, magazine, pressure zone with electro-pneumatic 2-point positioning via central control unit Pressure zone: First roller driven and 2 free-running rollers for excellent and consistent compression End trimming unit: 0.18 kW, 12,000 rpm Profile milling unit: 2 x 0.27 kW, 200 Hz, 12,000 rpm, counterrotation, 3-position adjustment chamfer/radius (R2), overhang and straight, max. 3 mm edge thickness with Siko counter Profile scraper: Max. 3 mm edge thickness Surface scraper: Reversible blade Chain width: 80 mm Edge material in rolls: 0.4 – 3 mm End trimming device: 0.4 – 3.0 mm Edge height: max. workpiece height + 5 mm Workpiece thickness: 8 – 40 mm Minimum workpiece width: • For workpiece thickness 8–22 mm: 70 mm • For workpiece thickness 23–40 mm: 120 mm (Depending on workpiece length) Dkjdpexvirfsfx Ahusw Workpiece overhang: 38 mm Edge cross-section: max. for PVC 135 mm² (max. 6 mm) Roll diameter: max. 830 mm Feed speed: 8 m/min Working height: 950 mm Pneumatic connection: min. 6 bar Overall length: 3,672 mm Location: ex stock 54634 Bitburg - Immediately available -

Condition: good (used), Year of construction: 2013, operating hours: 2,300 h, functionality: fully functional, machine/vehicle number: 630124, DEBURRING MACHINE MANUFACTURER: ERNST / LISSMAC MODEL: ATLAS EBR YEAR OF MANUFACTURE: 2013 Condition: Used Operating hours: 2,300 hours Working width: 1,500 mm Max. pass-through: 1,520 mm Workpiece thickness: 1–100 mm Feed rate: 0.5 – 4.0 m/min, stepless Conveyor belt: Rubber Working height: 1,000 mm Max. part weight: 160 kg/m² Deburring roller: 420 mm diameter 50 oscillating strokes per minute Drive motor: 15 kW Abrasive size: 1,540 mm x 1,540 mm ATLAS Brush Module-SPIN 2 rotating brush units: 300 mm x 260 mm Vacuum system for small parts: 200 mm wide, 80 x 80 mm Dimensions (L x W x H x working width x sheet thickness): Infeed section: 2,704 x 385 x 1,650 x 0.8–100 mm Deburring module: 2,704 x 580 x 1,650 x 1,500 x 0.8–100 mm Brushing module: 2,704 x 870 x 1,650 x 1,500 x 0.8–100 mm Discharge belt cleaning: 2,704 x 290 x 1,650 x 1,500 x 0.8–100 mm Deburring module: Power Current Compressed air Extraction m³/h Weight Dkedpfxsxuu Dkj Ahuow 16 kW 32 A 6/80 bar 2,500/25 400 kg Brushing module: 12 kW 24 A 6/80 bar 2,500/725 1,600 kg Rotor module: 20 kW 40 A 6/10 bar 4,500/25 1,800 kg Discharge module: 1 kW 2 A - - 400 kg Operating voltage: 400 V / 50 Hz Special voltage: 480 V / 60 Hz Control voltage: 24 V Compressed air: 6 bar, dry and oil-free Feed rate: 0.5–4 m/min, stepless 1.0–8 m/min, stepless (option) Working height: 1,000 mm The external filter is not included in the sale. Processing width 1,500 mm, thickness up to max. 100 mm, vacuum conveyor runs the full machine width. The first unit is a grinding roller (sponge rubber roller covered with abrasive paper, pneumatically tensioned), which can also oscillate and levels the burrs. The second module consists of two steel wire brush rollers that round off/knock off the burrs. This is followed by a rotor module (rotating multi-brush head) for fine rounding. EC Declaration of Conformity Dry dust extractor is not included, but a suitable unit can be offered immediately (OPTION). Operating manual Machine is sold without infeed roller conveyor!

Condition: used, Year of construction: 2024, functionality: fully functional, One-sided edge banding machine with NC-controlled adjustment via 18-inch touchscreen (L-Motion) Edge material: - Roll stock 0.4 - 3 mm - Solid wood strips up to 5 mm Workpiece thickness: 10 - 60 mm Minimum workpiece length: 120 mm Minimum workpiece width: 75 mm Minimum workpiece width with corner copying: 170 mm Feed speed: 16 m/min With corner copying: for thicknesses 16, 18 & 19 mm, feed speed 12 m/min Aggregate equipment: RIEPE separating agent application Jointing milling unit with 2 counter-rotating, demand-controlled motors, equipped with diamond-tipped spiral cutterheads Extra: Diamond milling tools, 65 mm height instead of 30 mm Automatic edge feeding with swiveling reel table, diameter 800 mm, with automatic strip magazine, spiked roller for solid wood strips Glue pot with automatic temperature control and stand-by function; glue roller temperature adjustable separately, capacity approx. 1.5 kg Extra: Glue run-out function, Teflon-coated drip tray, customized software for EVA/PU glue Extra: Quick-change glue pot system Pressure zone with 1 powered main pressure roller and 2 free-running follow-on rollers End trimming unit with 2 HF motors, 0.55 kW, pneumatically tiltable 0 - 10 degrees, controlled from the operator panel Combined milling station with 2 HF motors, 0.55 kW, 12,000 rpm L-Motion multifunction tool (straight & 3 different radii), horizontal & vertical tracing, motorized positioning via controller Extra: nesting package for combined milling unit Corner copying milling unit with 2 motors. Automatic processing of end edges up to 2 mm edge thickness (not recommended for soft- & postforming profiles) with 2 motors, 0.27 kW each 2 L-Motion motors for positioning the horizontal tracing shoes, plus tool positioning Radius scraper with L-Motion multifunction tool (3 different radii), motorized adjustment with 3 L-Motion motors Extra: nesting package for radius scraper Flat scraper unit with pneumatic in/out control from the operator panel RIEPE cleaning agent spray device Buffing unit with 2 motors, 0.09 kW each Control system: Dkodpfx Ahoxugplousw 18.5-inch graphic touchscreen with L-Motion software Extra: potential-free contact for connection to a return conveyor Total machine length: 4,890 mm The machine is being replaced due to insufficient capacity The return conveyor system visible in the photos is not included in the scope of delivery.

Condition: used, max. wheel diameter 300 mm gear width 200 mm max. module 12 Dodpfx Ahsxu Nttjuekw min. module 0,5 total power requirement 2 kW weight of the machine ca. 1 t dimensions of the machine ca. 0,8 x 1,2 x 1,5 m

Condition: good (used), Iseli EBW flank grinder Dkjdped Ncg Aefx Ahuew

Condition: excellent (used), Used Gecam - Euro Fintec 128 steel tube linisher / sander / polishing machine for sale Fintec 128 Tube finishing machine for sale Dkodpfx Aswbh Dyohuew Can be viewed under power with your steel tubes

Condition: used, Year of construction: 1978, sheet width . mm plate thickness . mm serial number 20719 total power requirement . kW weight of the machine ca. 1,4 t Dodpfx Ajucgvajhujkw

Condition: used, Year of construction: 1986, working width 50 mm wheel diameter 250 mm grinding wheel width max. 40 mm turning speed range 1500 + 3000 U/min total power requirement 1,0 / 1,4 kW weight of the machine ca. 100 t dimensions of the machine ca. 0,65 x 0,45 x 1,15 m Dkedpfx Aevn Al Tjhusw Deburring machine for deburring sheet metal or flat material, this machine is equipped with grinding wheels but can also be operated with brushes, 2-stage motor, base cabinet with rollers. Machine dealer with own stock of 1600 m².

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 98 h, machine/vehicle number: 17000-23051522412, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: CO₂ laser, laser source manufacturer: Epilog, laser hours: 97 h, laser power: 60 W, table length: 1,003 mm, table height: 673 mm, working length: 610 mm, working width: 305 mm, workpiece weight (max.): 63 kg, type of cooling: air, overall weight: 63 kg, total length: 1,003 mm, total width: 673 mm, total height: 455 mm, Equipment: cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, Laser engraver in excellent condition, supplied with a professional extraction unit and professional compressor. The system is totally complete and fully functional, virtually like-new (97 hours of operation). Business closed due to bereavement. Dimensions & Capabilities Working area (X × Y × Z): 610 × 305 mm Machine dimensions (L × W × H): approx. 1003 × 673 × 455 mm (39.5 × 26.5 × 17.9 in) Weight: approx. 63 kg (138 lbs) Laser Options Available type: CO₂ (metal/ceramic tube, air-cooled, 10.6 µm) with 60 W of power Speed & Precision Max. speed: 120 IPS (≈3.05 m/s) with 5 G acceleration Resolution: adjustable from 75 to 1,200 dpi Software & Memory Software interface: Laser Dashboard™ and Epilog Job Manager™ Internal memory: up to 1 GB, allows for jobs of any file size Control Features & Mechanical Construction Operation modes: raster, vector, or optimized combined mode Motors: DC brushless servo motors with rotary encoders for precise positioning Guide structure: Dkjdpfx Asw Hg Nfohuow * X-axis: polished stainless steel bearings with Teflon coating * Belts: double-width Kevlar type B for high accuracy Camera & Display IRIS™ system: integrated overhead camera for visual job placement directly onto the laser table 7″ LED touchscreen on the machine for job selection and direct autofocus Connectivity & Power Supply Connections: USB, Ethernet and optional wireless (Wi-Fi), compatible with Windows 7/8/10/11 Electrical supply: auto-switching 100–240 V, single-phase 50/60 Hz; max amperage ≈13 A (or ≈6.5 A depending on region) Ventilation & Safety Extraction requirements: external venting or internal filtration unit, airflow of 350–400 CFM (≈595–680 m³/h), single 4″ (102 mm) exhaust *Safety standard: Class 2 laser product (≤1 mW, 600–700 nm)

Condition: good (used), Year of construction: 1982, max. wheel diameter 600 mm gear width 500 mm max. module 15 min. module 1 total power requirement 2 kW weight of the machine ca. 2 t dimensions of the machine ca. 2x1,5x2 m The rounding of the teeth is obtained by coordinating alternative movement of the cutter and rotary movement of the piece. The alternative movement of the cutter is obtained by rotating a cam, shaped in order to obtain radius or cusp rounding. A series of 4 cams allows to work modululus from 1 and 16 included. An regulation device allows change the modulus between the minimum and maximum value of every cam. The rotation of the piece is controlled by a three-stage gear wheel which forms the dividing system. The piece lock and the movement of the rapid entry of the cutter to the piece is controlled by pneumatic servo devices. The practicality and rapidity of the equipment, as well as the wide range of profiles available on the cams and the ability to process internal gears, make the machine a universal machine suitable for machining small and large series. --> technical features Max module: 15 --> Max diameter: 600 mm --> Spindle/head speed: 1450 - 2100 - 2800 rpm --> Production output teeth per minute: 35 - 50 - 75 --> Motor output spindle: 2800 rpm - 1.5 HP --> Motor power piece rotation (self-braking): 1.5 HP --> Motor power automatic (self-braking): 0.35 HP Dkjdpfx Ahjwftuxousw --> Motor power cooling system: 0.25 HP --> Dimensions: 2000 x 1500 mm --> Total weight: 2000 kg Accessories Cam x 5 Indexing wheels Tools Serial no. 152/0589/94 Machine with full enclosure Counter support

Condition: excellent (used), Year of construction: 2005, Edge banding machine Brandt KDF 530 c with jointing, corner copying, two scraper blades, and Riepe spray units. Dsdpfxexd Dude Ahujkw A video of the machine in operation can be provided upon request. The machine is highly automated Edge thickness approx. 0.4 – 8 mm Workpiece height approx. 10 – 50 mm Feed speed approx. 11 m/min Noise protection hood Extendable workpiece support Extraction connection 1x200 mm, 1x100 mm, including the depicted piping PC16 control with color display for user-friendly machine operation Units/features: Pressure beam manual adjustment with SIKO counter Infeed guide manual adjustment with SIKO counter Riepe separating agent spray unit Joint trimming with Leitz Whispercut diamond cutters, sharpened Gluing station switchable between feed and contra-rotation Pressure zone with 3 rollers Cross-cut saw with 2 motors, for straight or chamfered cutting (program-controlled adjustment) Multi-function milling unit with motorized lateral adjustment Radius scraper R2, pneumatic adjustment Corner rounding mill R2 with one diamond cutter motorized, pneumatic adjustment between thin and thick edge Glue joint scraper, pneumatically retractable with large roller Riepe cleaning agent spray unit Buffing unit Hood lock CE marking Operating manual available as folder and CD All reversible blades of the milling units and scraper blades have been replaced or rotated, saws sharpened, joint cutters sharpened, buffing wheels renewed. The machine is therefore immediately ready for use. Only the diamond cutter for the profile milling unit has not been replaced but is still sharp. Minor paint touch-ups. Approx. 3,500 operating hours. The condition of the machine speaks for itself. Occasionally, the computer reboots while the machine is running (mainly at higher room temperatures), but this has not been an issue for us—work can continue during the reboot. Machine dimensions approx. 4800 x 1200 x 1800 mm (LxWxH) Weight approx. 1,900 kg. The machine can be inspected in operation at our facility by appointment. We only offer machines that are ready for demonstration in our warehouse—see "more offers from this supplier."

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: C-261-04-2523, feed rate X-axis: 9,000 m/min, saw blade diameter: 100 mm, rotational speed (max.): 12,000 rpm, Submitting a bid obliges you to collect the item by the deadline of 14.10.2025! TECHNICAL DETAILS Edge Processing Edge type: Straight edges Edge material: Cut-to-size strips, lip cuts, coil material Feed speed: 9 m/min Edge material thickness: 0.4–3.0 mm Lip thickness: 0.4–3.0 mm Edge material height: 55 mm Coil diameter: 800 mm Dodpsxhgk Ajfx Ahuskw Rotation speed: 12,000 rpm Max. tool dimensions: 100 × 62 × 30 mm Extraction port Ø: 120 mm Workpiece Data Workpiece thickness: 8–50 mm Positioning accuracy: 0.1 mm Edge Banding Edge type: Straight edges Edge material: Coil material Max. tape cut: 3 × 30 mm or 0.8 × 45 mm Operating pressure: 6 bar Edge Glue Applicator Rotation speed: up to 1,800 rpm End Trimming Unit Motor speed: 12,000 rpm Saw blade diameter: 100 mm Cutting width: 2.6 mm Bore diameter: 32 mm Workpiece thickness: 45 mm Max. edge material height: 3 mm Edge material angle: 0–15° Edge material cross-section: 135 mm² Flush Trim Unit Rotation speed: 12,000 rpm Max. workpiece thickness: 8–50 mm Max. edge thickness: 3 mm Straight tools: 2 × WPL milling cutter Ø 50 × 12 × 16 mm, z = 4 Combination tools r = 3 mm: 2 × Trimmer Ø 56 × 50 × 12 × 16 mm, z = 4 MACHINE DETAILS Electrical Data Voltage: 400 V Frequency: 50 Hz Fuse protection: 16 A Control voltage: 24 V

Condition: good (used), functionality: fully functional, Control unit, top 1902 Edge feeder for strips & rolled material 1906 Glue application station (sensing nozzle) with cartridge reservoir Processing of EVA & PUR cartridges 1918 Pneumatically swiveling cutoff unit 0 - 12° 1942 M Multifunction milling unit flush/chamfer/radius, pneumatic with motorized adjustment 1929 Radius scraper blade 1983 Contour milling unit 1964 Surface scraper blade 1940 Scraper unit Dsdjxuiyaspfx Ahujkw

Condition: used, Repair-needing Wide Belt Sander, Surface Grinding Machine, Sheet Metal Deburring Machine, Deburring Machine with 4 Processing Stations Sanding Unit and Brushing Deburring Unit Manufacturer: BÜTFERING - STEELMASTER Type: Frima-V/413RRTT Machine No.: 76 931 Year of Manufacture: 2002 2x Brushing Deburring Units + 2x Sanding Units Dsdpfxow Ed Uvj Ahujkw Max. working width: 1350 mm Conveyor belt width: 1370 mm (heavily worn on the sides) Working thickness: 0.3 mm to 150 mm Sanding Units Abrasive belt dimensions: 1350 mm x length ?? mm Abrasive belt motor (1): 11 kW (speed 2930 rpm) Abrasive belt motor (2): 12.5 - 16 kW (speed 1470 - 2950 rpm) - Abrasive belt speed (belt 1): only at high speed - Abrasive belt speed (belt 2): 2 speed settings - Pneumatic belt tensioning Brushing Deburring Units with multiple vertical sanding discs and oscillation 2 roller brushes Ø 250 mm Roller width: 900 mm Brush speed: approx. 1440 rpm Deburr brush motor (3): 7.6 - 9.5 kW Deburr brush motor (4): 7.6 - 9.5 kW - Sanding disc speed (3): 2 speed settings - Sanding disc speed (4): 2 speed settings - Oscillating movement of brush rollers via gear motors - 2 separate drive motors, one for each brushing station Conveyor Feed Unit Conveyor motor power: 0.75 kW - Infinitely variable conveyor speed via frequency converter - Motor-driven height adjustment for material thickness 0.3 - 150 mm Power supply: 400 Volt, 50 Hz, 55 kW Machine footprint: Length 300 x Width 270 x Height 210 cm Required space for transport: Length 600 x Width 242 x Height 210 cm Weight: approx. 5.5 tons The machine was operated with wet grinding; belt filtration system integrated in the machine frame The machine is in poor condition, was taken out of production, and stored under tarpaulin for approx. 5 months. Technically, everything still appears to be in reasonable shape, but improper storage has led to some rust formation. The machine requires refurbishment.

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: Dodpfewka S Iox Ahujkw - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim