Used Conical Rounder for sale (1,057)

Condition: used, Year of construction: 2002, Cylindroconical fermentation and storage tanks with 3 frame cooling zones and cone cooling. The tanks are insulated and clad. Individual sale possible. Hfodpfx Aoxbn Eusacen Additional title: vertical, coolable stainless steel tanks Gross volume: 58890 l Max. overpressure: 2 bar Operating temperature: -10 to 50 °C Total cooling area: 13,3 m2 Length: 3370 mm Width: 3370 mm Height: 11000 mm Material: stainless steel Position: vertical Features: insulation, cladding, cooling jackets (3x frame, 1x cone)

Condition: good (used), Year of construction: 2001, • Clamping Force: 80 tons (800 kN) • Screw Diameter: 35 mm • Shot Weight (PS): 165 grams • Tie Bar Spacing (H × V): 420 mm × 420 mm • Opening Stroke (Max): 450 mm • Minimum Mould Height: 250 mm Hfsdpfx Aswgamkjacsn • Maximum Daylight (Platen Distance): 700 mm • Control System: Selogica • Power Consumption: 29.9 kW • Machine Dimensions (L × W × H): 5,200 mm × 1,600 mm × 2,200 mm • Machine Weight: 3,800 kg

Condition: good (used), Year of construction: 2003, operating hours: 106,864 h, clamping force: 1,300 kN, screw diameter: 35 mm, The machine was very well looked after, service and maintenance were always carried out on time. Good condition, fully functional Still in use until week 11 Further service reports and documents available Technical data: YEAR OF MANUFACTURE: 2003 Automatic operation: 106,864 h Clamping force: 1300 kN Screw diameter: 35 mm Screw stroke: 180 mm Closing force: 50 kN Opening stroke: 500 mm distance between ejector plates: 750 mm Ejector force: 40 kN Hfodpfxjrp Dyro Aacon Advance package - VE561/20 LGS Position-regulated screw with control valve on the injection unit for particularly high dynamics and reproducibility of the injection process, the back pressure is regulated, the nozzle contact force is manually adjustable - VE 557/00 AES Energy-saving system for automatic performance optimization and corresponding energy energy saving through infinitely variable adjustment of the pump drive speed to the respective power requirement of the spraying cycle - VE 460/00 ED Electromechanical metering drive via a speed-controlled three-phase asynchronous motor to increase productivity through simultaneous movement, through gentler material preparation and corresponding energy savings compared to hydraulic dosing On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: like new (used), Year of construction: 2020, functionality: fully functional, height adjustment type: mechanical, input voltage: 400 V, space requirement height: 1,200 mm, Edgebander equipped with: calibrators, edging material magazine, interchangeable hotmelt glue pot for EVA or PUR, flush trimming, rounding trimming units. Hfsdpfx Aaewy Ugxjcon

Year of construction: 2019, condition: used, Various CCTs, Fermenter, Fermentation, Storage Tank, Bright Beer Tank, BBT, Cooling jacket, Year: 2019, Volume 10hl 1000 liter, 20hl 2000 liter, 30hl 3000 liter, 1,5 bar Hfjdpfx Aev Tb N Usacsn

Condition: reconditioned (used), Year of construction: 2002, Multicomponent Arburg IMM (Horizontal & Vertical) Clamping force 100 tons. Year 2002. Machine will be delivered RE-Conditioned (full checked tested and operate) Ask us for our service of Start Up with Warranty of working condition. Technical details CLAMPING FORCE 1000 kN SCREW DIAMETER Horizontal bimetalic 25mm SCREW DIAMETER Vertical 18mm INJECTION PRESSURE 2500 BAR INJECTION VOLUMEN horizontal 54gr INJECTION VOLUMEN Vertical 20gr DISTANCE BETWEEN TIE BARS (h x v) 420x420mm MIN. MOULD HIGHT 250mm DAYLIGHT MAX 750mm WORKING HOURS 79.115 YEAR OF BUILDING 2002 Hedpfx Aaep Audqjcofn

Condition: used, Year of construction: 2001, Insulated, cylindroconical stainless steel tanks with two frame cooling zones and cone cooling. Most recently used as a beer storage tank with a usable volume of 150 hl. Additional title: vertical, coolable, insulated stainless steel tanks Hfsdjvu Tvvspfx Aacon Gross volume: 15260 l Pressure capacity: 0,99 bar Max. operating temperature: 20 °C Cooling area: 6,95 m2 Length: 2,52 m Width: 2,52 m Weight: 2100 kg Material: stainless steel Base construction: standing frame Features: insulation, tank fittings

Year of construction: 2004, condition: used, Various Numbers of CCTs, Storage Tanks, BBTs, Bright Beer Tanks, Cooling jacket, Year: 2004, Net Volume approx. 45 hl, 4500 Liter, 1,5 bar. Hsdpfx Aaev Tb Nhecsfn

Condition: used, - 3 x 145 hl CKG: Cylindroconical fermentation tanks with three jacket cooling zones and one conical cooling zone. Space-saving design with a central base. Equipped with a 2-hole cleaning/air valve combination, manhole, and crane eyes. Manufacturer: Ludwig Edel; Year of construction: 1981 - 2 x 92 hl CKG: Cylindroconical fermentation tanks with two jacket cooling zones and one conical cooling zone. Manufacturer: Ernst Möschle; Year of construction: 2007 - 1 x 63 hl CKG Cylindroconical fermentation tank with two jacket cooling zones and one conical cooling zone. Manufacturer: Ernst Möschle; Year of construction: 2007 Additional title: Vertical, coolable stainless steel tanks; built between 1981 and 2007 Max. overpressure each: 1 bar Material: stainless steel Position: vertical Hjdpfx Aasw U D Hpjcsfn Features: 3x CCT 145 hl, 2x CCT 92 hl, 1x CCT 63 hl

Condition: used, Year of construction: 2004, Kieselguhr settling tank with 4.45 m³ capacity Additional title: KG settling tank Content: 4450 l Max. working pressure: 80 °C Hfjdpfx Aaow Uc Thjcon Length: 1710 mm Width: 1710 mm Height: 3550 mm Weight: 450 kg Material: stainless steel 1.4301 Position: vertical cylindro-conical tank Base construction: on pipe feet Features: manhole on top, 4 shell-de-watering-connections, 4 aeration-connections at the cone

Year of construction: 2017, condition: used, Vertical, conical stainless steel pressure tanks with cooling jacket, temperature control, 2 outlet pipes, cleaning pipe, hose level indicator, pressure gauge, bunghole and sampling tap. Additional title: vertical, coolable stainless steel pressure tanks Gross volume: 1155 l Pressure capacity: 3 bar Density: 1,1 kg/l Length: 1,2 m Width: 1,2 m Hsdpfsw Tbq Aox Aacjfn Height: 2,5 m Operation / Control: Temperature control via Liqiosystems iFerm Nano Material: Stainless steel Position: vertical Base construction: standing on 3 feet Features: Frame cooling jacket, overflow pipes in cone tip and cone wall, hose level indicator, cleaning pipe, pressure gauge, bunghole device, sampling tap

Year of construction: 2020, condition: used, Single-purpose pressure/Unitank vessel for breweries for fermentation, maturation and lagering of beer Useful volume: 9000 L Max. working pressure in the tank: 3 bar Hfjdpsw Igziofx Aacon Total volume of glycol duplicators: 85 L Max. working pressure in duplicators: 1 bar Width: 2400 mm Height: 5000 mm Weight: 2250 kg Material: rust-proof; polyurethane insulation Position: vertical on 4 feet Features: 2 cooling zones, 2 DN40 cone outlets (beer/yeast), 1 side tap as dry hop port at manhole height

Year of construction: 2019, condition: used, Capacity approx.: 31000 l Operating pressure: 3 bar Operating temperature: 50 °C Length: ca. 2800 mm Width: ca. 2800 mm Height: ca. 8000 mm Weight: 4500 kg Hedpfx Aajvcq Ewecjfn Material: stainless steel Position: vertical Base construction: 4 x height-adjustable feet Features: Cooling: cone and side wall; insulation; hydrostatic pressure sensor Deltapilot M (E+H); sampling valve; 3 x PT 100, swivel cone

Condition: used, Year of construction: 2001, Insulated, cylindroconical stainless steel tanks with two frame cooling zones and cone cooling. Most recently used as a beer fermentation tank with a usable volume of 150 hl. Additional title: vertical, coolable, insulated stainless steel pressure tanks Gross volume: 19040 l Pressure capacity: 2 bar Max. operating temperature: 40 °C Cooling area: 8,4 m2 Length: 2,53 m Width: 2,53 m Height: 6,54 m Weight: 2300 kg Material: stainless steel Hedpfxevu Tvie Aacjfn Position: standing frame Features: insulation, tank fittings

Condition: used, Year of construction: 1999, Insulated and clad stainless steel tanks standing on upright frames, each with three frame cooling zones and one cone cooling zone. Additional title: outdoor tanks Volume: 170000 l Operating pressure tank: 1 bar Operating pressure cooling: 4 bar Test pressure: 1 bar Width: 3,8 m Height: 18,1 m Material: Stainless steel 1.4301 Position: Vertical Base construction: Skirt Hfjdpfx Aasvcqfkjcsn Features: PT100, full and empty detection probe, 4 cooling zones (3 frames, 1 cone, 42 l, 42 l, 126 l, 35 l), safety valve

Condition: used, Used Becomix model RW30CD stainless steel process vessel. Approximate 2-25 litre working capacity (product dependant). Unit has clamped dished top head and welded conical bottom head. Internal rated 29psi (2 bar) maximum allowable working pressure at 273 deg.f. (133 deg.c.) and 15psi (FV) maximum allowable external working pressure at 41 / 273 deg.f. (5 / 133 deg.c.) Minimum design metal temperature 41 deg.f. (5 deg.c.) at 29psi (2 bar). External stainless steel jacket rated 58 psi (4 bar) maximum allowable working pressure at 41 Deg.F. (5 deg.c.) to 306 deg.f. (152 deg.c.) Unit has top mounted agitator with electric drive/gearbox and bottom entry homogenizer with electric drive. Unit mounted in a stainless steel mobile frame. Hfjdpfx Asxnl I Toacon Click on the link below to see a video of the machine running.

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Hsdpfx Ash U Rzgeacsfn Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: used, Manufacturer: Then Type: Conical hopper on wheeled frame Hedpew H Stnofx Aacefn Stirring: Yes Useful volume: 150 liters Manual drain valve  

Condition: new, Year of construction: 2024, SCHORR track dumper RR500DHKA2 PRO: - 9.2 HP four-stroke engine - Self-propelled & powerful track drive Hfedpfxjttg Rao Aacon - 500kg payload - Large & high-quality tipper body with large tipping angle - Folding passenger platform as standard - 6+2 gears - Robust and scratch-resistant - Top price-performance ratio SCHORR TRACK DUMPER RR500DHKA2 PRO WITH TIPPING HYDRAULICS AND RIDER PLATFORM The SCHORR RR500DHKA2 track dumper has a hydraulic tipping drive and a payload of 500 kg as well as a powerful 9.2 hp single-cylinder 4-stroke petrol engine. The robust transmission has 6 forward gears and 2 reverse gears. Thanks to its slim design (710 mm), the minidumper can also drive through narrow paths and doors, making it an extremely flexible means of transportation. Thanks to the minidumper's powerful track drive, you can also overcome rough terrain, inclines and kerbs with ease. The rubber tracks provide a secure footing in any working area. Lifting and lowering the tipper body / box is effortless and effortless thanks to the hydraulic tipper drive, even when fully loaded. With a robust skip made of thick sheet metal and a straight outlet that ensures quick and easy discharge, this dumper is a must for anyone who needs to transport heavy loads. Even tipping on slight inclines is no problem. The large tipping angle ensures that even fully loaded skips are emptied completely without you having to help manually. This saves time and effort and makes the motorized wheelbarrow an indispensable tool for anyone who values efficiency and performance. The smooth-running chain brakes ensure that the dumper is easy to maneuver. TECHNICAL DATA: Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR500 Model: DHKA2 Load capacity: 500kg Tilt drive: Hydraulic (stepless) Travel drive: Chain Weight without/with packaging: 288 / 328kg Drive Engine: Air-cooled 1 cylinder four-stroke engine (OHV) Starter: Reversing starter Power: 9,2PS Gearbox: 6 forward gears / 2 reverse gears Maximum speed Forward gear: max. 8km/h Reverse gear: max. 5 Liquids Fuel tank capacity: 6L (unleaded petrol) Hydraulic oil tank capacity: 3L (ISO VG 32) Transmission oil tank capacity: 1.5L (SAE 80W-90) Engine oil tank capacity: 0.9L (15W-40) Max. Hydraulic oil flow rate: 9L/min Basic dimensions Total length platform folded: 1800mm Total length platform unfolded: 2000mm Total width (incl. chain): 710mm Overall height: 1050mm Container dimensions (inside): 740 x 665 x 435mm Container dimensions (outer dimensions): 1060 x 710 x 520mm Track width: 710mm Load volume (liquid): ~ 200L Load volume (heaped): up to 370L (depending on load) Drive chain dimensions: 180 x 60 x 38mm Ground clearance: 120mm Packaging size: 1890 x 740 x 1220mm Filling height Side: 810mm Front: 580mm A REAL ALL-ROUNDER The RR500DHKA2 minidumper offers a flexible and mobile solution for transporting materials (e.g. bulk material) in construction projects, especially on uneven terrain. Thanks to its compact design and chain drive, the dumper is very maneuverable, making it particularly suitable for construction and gardening work. The built-in tipping hydraulics are very robust and make working with the device considerably easier compared to manually operated tipping systems.

Condition: new, Year of construction: 2023, The ALTENDORF F 25 offers everything that a sliding table saw a sliding table saw must be able to do. Whether in your first own workshop, for daily use, in industrial production or as a or as a powerful second machine. The F 25 is the space-saving all-rounder that simply makes you makes you more productive. Materials such as wood panel materials, solid wood, wood-like materials or extruded profiles can be easily processed thanks to optimum precision outstanding cutting quality. The one-sided swivel saw blade also enables angle cuts. The smooth-running double roller carriage, based on the Altendorf system, as well as the digital display of height and height and tilt are standard features. A machine for beginners and professionals alike. Double roller carriage, 3200 mm swiveling, man. Height and swivel adjustment, parallel stop with man. Fine adjustment, angle mitre fence, large extraction hood, PSV Hodpfx Aoqvn Ruoacofn ----- Technical data ----- Swivel range: 0 - 46 °, carriage length: 3,200 mm, Rip fence: 1,000 mm with Digit X Cutting height: 100 mm, max. saw blade Ø: 315 mm, max. saw blade projection: 104 mm, Crosscut fence extendable up to: 3,450 mm, speeds: 3,600 / 4,200 rpm, Motor power: 5.5 kW, 7.5 HP, work table height: 880 mm Type: F 25 Version 5 5.5 KW (7.5 HP) 2 speeds Rip fence Digit X, 1000 mm Large extraction hood PSV Without scoring unit, prepared for retrofitting a scoring unit installation of a scoring unit Special price ex stock 54634 Bitburg - available immediately -

Condition: used, Reportedly unused 304 stainless steel vessel manufactured by ROLEC Prozess und Brautechnik GMBH. New 2015. Total volume 160,000 litre, useful capacity 120,000 litre. Max. working over pressure 0,9 bar (15 PSI)-Conical angle: 70 °-Double jacket. Vessel :Material: stainless steel 1.4301 (304) - Tank support: 4 stainless steel feet with floor plates Cooling :Cooling liquid: glycol - Water temperature: -3°C - Cooling section cone: 1 - Cooling surface of the cone: 12 m² - Cooling surface of the side walls: 48 m² Vessel dimensions :Inner Ø : 3900 mm (12' - 9 5/10") - Outer Ø : 4100 mm (13' - 5 4/10") - Shell height : 9000 mm (29' - 6 3/10") - Cone outlet height : 1000 mm (3' - 3 4/10") - Total height : 13600 mm (41' - 0 1/10") plus platform and fittings - Various inlets and outlets Specifications: Capacity: 31,700.6 gal Diameter: 13.12' Height: 44.62' Type Of Heads: Conical Vertical/Horizontal: Vertical Hfedexm T Irepfx Aacjn Type of stainless: 304 Legs/Lugs: 4 stainless steel feet with floor plates

Condition: used, Year of construction: 2022, Manufacturer : Buhler Haas-Mondomix B.V. Model: HAKA type VA-15L Year: 2022 Type : Foam / Aerator mixer Previous application : Application : Whipped cream Production capacity : 100 kg/hr nominal Input density : 1,0 kg/l Output density: 0.6 – 0.8 kg/l   Near as new condition. Unit consisting of : – Pre-mixer PCM 400 litres Capacity: 400 litres Design: conical bottom Lid with hinged access for manual loading of ingredients Jacketed, insulated and protected tank Stirrer: cutting blade + Teflon scrapers PT100 temperature sensor – HALA type dispensing pump with frequency converter Volumetric pump with frequency converter Jacketed design Mass flow meter with regulator – HAKA VA-15L type continuous aerator Rotor / stator with 912×5 mm square lugs Effective volume 2 ltrs Mixing head stator Double-walled front and rear plate for cooling Hfsdpfx Asvlzv Ssacjn Rotor designed for cooling Temperature sensors Jacketed piping 7.5 kW direct drive motor, frequency converter controlled Air injection: manual or automatic with mass flow meter Automatic pressure control and regulation Cabinet + PLC, Siemens S7 type – HANB cold water production unit Autonomous chilled water unit (thermoregulation) for cooling the expansion head tank Water temperature between 5°C-20°C Spiral heat exchanger / Centrifugal pump / Closed water tank – CIP Easy Clean system for easy cleaning – Stainless steel platform supporting all equipment

Condition: new, Year of construction: 2024, SCHORR low lift pallet truck fully electric 1500kg load capacity -- With lithium-ion battery -- External charger -- Polyurethane tires: durable and abrasion-resistant -- Low-maintenance and smooth-running -- Robust and stable -- Top price-performance ratio -- NEW & IMMEDIATELY AVAILABLE! SCHORR electric low lift pallet truck 1500kg lithium-ion The SCHORR electric pallet truck is the perfect solution to make your warehouse logistics faster and more efficient. With a load capacity of 1500kg and an all-electric drive, it effortlessly handles the heaviest transportation tasks. This saves time and energy and increases the productivity of your employees. The electric pallet truck is extremely robust and durable. It is made of high-quality materials and is equipped with reliable technology that guarantees high performance even with intensive use. The ergonomic handle makes it easy and comfortable to operate, even over long periods of time. Thanks to the lithium-ion battery, our electric pallet truck is particularly efficient and durable. It is maintenance-free and enables a longer operating time as well as a faster charging time compared to conventional batteries. For you, this means more productivity and less waiting time. The battery can be charged quickly and easily with the charger included in the scope of delivery, so that the pallet truck is always ready for use. The electric pallet truck is also very maneuverable and can be easily maneuvered in narrow aisles and spaces thanks to its compact size. Technical data: Load capacity: 1500kg Lithium-ion battery (24 V/20 Ah) Length: 1550mm Width: 560mm Height: 82mm Fork length: 1150mm Tires: PU Hfsdpfx Aaemv Ehtscen Own weight: 120kg The SCHORR electric low lift pallet truck is a real all-rounder. Whether in production, in the warehouse or in logistics - it can be used anywhere. With its reliability and performance, it will quickly become an indispensable helper in your company. Convince yourself of the quality of the all-electric low lift pallet truck and order it today. Whether you want to have the pallet truck delivered to you or collect it from our premises in 48465 Schüttorf, we have the right solution for everything. Please feel free to contact us. In order to make pick-ups and viewings as convenient as possible for you, we would like to point out that they are only possible by telephone appointment. Would you prefer to finance or lease the device? No problem! We also offer you attractive options for this. Simply contact us and we will advise you on the various options. We look forward to hearing from you! We at SCHORR will be happy to answer any questions you may have about our pallet trucks. You can reach our competent team by phone or email. We look forward to hearing from you and being able to help you with advice.

Condition: new, Year of construction: 2025, Edge sanding machine with overhead feed unit Hfjdehqb Rcepfx Aacjn What distinguishes the Uniq-S from the Uniq is the feed system integrated into the machine table with rubberized feed belt and overhead pressure beam. It significantly facilitates the grinding and production of beveled and chamfered edges, as well as the serial grinding of workpieces. Furthermore, it is also an aid when machining exceptionally large or small parts. The feed speed is infinitely variable between 3 and 15 m/min. A soft conveyor belt at the bottom and rubberized rollers on the top pressure beam gently convey the material. A second bottom conveyor belt is available as an option. The top pressure rollers can also be replaced by a rubber belt, which helps especially when grinding extremely small parts. The Uniq-S is recommended as an all-rounder that enables all processing - from solid wood to fine veneer edges in high quality. The infinitely variable feed speed allows optimum adaptation to the material. 1st sanding station: "veneer side 2nd sanding station: "solid wood side 3rd sanding station: "Additional table 4th sanding station: "Semi-circular table Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, Used Winkworth model PV3000 approximately 3,000 litre stainless steel process vessel. Unit measures approximately 1800mm diameter x 1800mm straight side. External jacketed rated 3.5 bar pressure at 200 deg.c. Unit has a welded flat top and welded conical bottom. Unit has a top entry stainless steel contra-rotating gate agitator with pitched blades driven by (2) geared motors: a 9.2kW geared motor operating at 14.8rpm and a 7.5kW geared motor operating at 27.2rpm. Unit has a bottom entry Silverson BE600 homogeniser with a square hole disintegrating head driven by a 22kW motor. Unit includes a bottom entry discharge pump. Unit is mounted on (3) legs. Hjdpfexlgiyox Aacsfn