- Power: AC Motor 55 kW
- Screw Diameter: 50 mm L/D 1:40
- Screw Rpm: Max. 600 rpm
- Heating complete (40 kw all together)
- Volumetric Main Feeding
- Watercooling
- Side feeding
- Degasation with Vacuum
- Electric Cabinet
Cftg3gj
-incl. trial with customer
- Capacity: Until 250 kg/h, depends to material mix
Optional according to customer requirements
- Waterring Pelletizer "Leistritz / Gala 300 H"
- Strand Die Head , waterbath, pelletizer
- Screen Changer
Twin screw extruder FANGTAI FT 500-2 manufactured in 1998. The machine currently has one snail with a diameter of 50 mm and one screw with a diameter of 65 mm.
Sujcdk
Technical parameters of the machine with a diameter of fi 50 mm:
- screw diameter: fi 50 mm
- L / D ratio of length to screw diameter: 28: 1
- rotational speed of the screw: 10-120 rpm
- film width: 200-550 mm
- film thickness: 0.015-0.04 mm
- main engine power: 7.5 kw
- heating power: 30 kw
- efficiency: 50-100 kg / hour.
- weigh...
Completely overhauled Leistritz ZSE 67 GL compounder.
Bmyxk0vv8e
Extruder model year: 1983
New barrel and screw: 2014
New Resotec control: 2016
Maag Melt Pump: 2014
The machine is delivered including 4 components gavimetric dosing from Motan Colortronic.
WEBER DS 11: 22D, year 1997
TWIN SCREW EXTRUDER
Application: PVC pipe
Output: approx. 600 kg / h PVC (powder)
2rqqca
Screw and barrel very good
General condition: very good, ready for use
Delivery time: immediately
stock- No. 1665
1 used, in 2019 partly overhauled and tested
ERMAFA compounding line E 90.2 , equipped with:
volumetric dosing unit ERMAFA for material feeding
extruder twin screw Ø 2 x 90 mm - 25 LD – co-rotating
segmented screws and barrel,
extruder drive 70 kW DC, torque 5400 Nm
2 x degassing ports - 1 x vacuum pump
hydraulic screen-pack-changer Ø 150 mm
ᐳ strand pelletizng equipment
or
ᐳ waterring pelletizing unit incl. dryer
control board
Inpceni
The line can be inspected in ...
Available Twin Screw-Rollerdie Extruder
description attached!
Hgqjgen
Parallel twin screw extruder Cincinnati ARGOS 93P – APC
Output rate: up to 380 kg/h (depending on material and tooling)
Main motor: 50 kW (AC-drive)
Screw diameter: 93 mm, L/D = 26
Screw speed: up to 26 rpm
New touch screen control KEB 18.5 inch (wide screen)
New frequency converter KEB COMBIVERT F6
New degassing unit incl. vacuum filter
Horizontal dosing feeder with new frequency converter
Screws & barrel in very good condition
Original Cincinnati screws: T9B4.5 (steel plated)
Original Cincinna...
There are two twin screw extruders available, outer screw diameter machine 1/ 2: 32 L/D/ 36D, output LDPE/ LLDPE machine 1/ 2: 100/ 120kg/h, motor and gear were refurbished in 2010 and 2018 respectively both machines include dosing weighers and one temperature control device, as well as additional accessories.
Mum2r8
Twin Screw Extruder Line - Compounding
Blytknzhmw
- Electric Cabinet
- Motor AC 5 kW
- Screws 20/42 LD
- Degassing
- Side feeding
- Die Head with 2 holes , 3mm
- Water cooling
- Heatings incl.
- Waterbath
- Pelletizer
Visit and a trial with the customer is possible. (Also Video Call)
Gear box for twin screw extruder Cincinnati Argos 93-26D
This gear box was in use for u-PVC window profile production
It has been maintained according to the guidelines of the manufacturer
Original equipment from Cincinnati extrusion technology Vienna
Condition:
very good
Bphnwwstam
quality checked
new oil filling
Remark:
only the gearbox within scope of delivery (motor & dosing feeder not included)
Parallel twin screw extruder KRAUSS MAFFEI KMD 2-110
Output: up to 500 kg/h (depending on material and tooling)
Main motor: 94 kW (AC-drive)
Screw diameter: 110 mm, L/D = 23
Screw speed: up to 23 rpm
New touch screen control KEB 18,5 inch (wide screen)
Hjjgxy
KEB frequency converter incl. water cooling
Gear box incl. central lubrification
New degassing unit
New heater bands on barrel
Screws & barrel in very good condition
Number of tool heating zones: 9+1 for adapter
Horizontal dosing feeder
New...
New and never used machine.
Iwfspyf
- Berstorff Double-Screw Extruder ZE 130A
-Extruder Screw 2x140 mm
L/D 30:1
Building Year: 1988 (never used)
Engine: DC Motor - 250 kW
Screw-Rotation: 300 Rpm
Extruder-Heating: 70 kW
With two degassing.
* General * SKU037E122 * LocationBarneveld * MakeWerner & Pfleiderer Stuttgart * TypeZSK-25 P 8.2E * .230230 * Key Features * Double screw extruder(1x) * Screw diameter25mm * L/D40 * Co-rotating * Vented * Number of heating zones:6 * Electric heating(18x 500 Watt) * Water cooling * DC-motor10,4 KW, 440 Volt * With variable speed drive * Screw speed± 50-500 Rpm * Information * Year of construction1990 * With switchgear * Floorspace3,2x0,9 M * Total height1,5 M * Weight950 KG What you can expect f...
Single screw extruder, used
manufacturer: Ide
type: ME-60/3-25-S
year of construction: 1993
machine no.: 775
screw diameter: 60 mm
Screw length: 25 x D
Screw: 3-zone screw for PVC-U, ABS, PC, TPE
Drive power: 35 kW
Dcg0m3kr
Screw speed: 9 - 90 1/min.
Computer control: ME-Control
Accessories: Mass pressure sensor and mass temperature sensor
Remark: In 2013 a new barrel and a new screw were installed in the extruder (original from Ide, invoice available).
Condition: The extruder was cleaned, repai...
A ready-to-use single-screw extruder from the SIKOPLAST brand is for sale. Ideally suited for foils, styrofoam, flakes or other materials with a high volume. The system is fully configurable to accommodate a wide variety of materials.
Technical specifications:
Throughput: 300-550kg / h depending on the material.
Material: Built for low density material like film or EPS / XPS
Year of construction: 2017 rebuild and overhauled
Motor: 105kW main drive
Screw diameter 120mm / 32LD
55kW extruder heati...
IDE-o/c 204016
SINGLE SCREW CO-EXTRUDER MEB 30/5x25D
(picture similar, here shown MEB 20/5x25D)
- NEW machine from IDE-stock program
- mobile on 4 swivel castors
- manual height adjustment ± 200 mm via threaded spindle
- control cabinet integrated in the frame
- control via PLC Control 20/4
* operation via 5.7" touch panel
* screw on/off
* screw speed
* screw speed display
* display motor load
* heating on/off/lowering value
- emergency stop button on the control cabinet
- incl. con...
Extruder Krauss Maffei single screw
X3cjo
Super condition
immediately ready for use
To bid against
* General * SKU042B319 * LocationBarneveld * MakeBerstorff * TypeZE-130R Silicon tube extruder * 2900/92 * Key Features * Double screw extruder(1x) * Screw diameter150mm * L/D10 * AC-motor90,0 KW, 380 Volt (Ex) * Screw speed± 75 Rpm * Information * Year of construction1993 * Floorspace4,0x1,2 M * Total height2,3 M * Weight6500 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination world...
This Cappuzi extruder has been used to produce corks out of PP. The condition of the machine is very well. We have shut down and decoupled the machine ourselves.
Technical details:
Screw: 50mm
L/D: 28
Drive: 22kW
RPM: max. 140
Brprlqdsxs
The machine can be viewed in Breda and it will be delivered including complete documentation.
For items Ø 1,5-50mm.
Extra gear engine for small wall items.
Bssty89hzz
Reconditioned in 2004 with new drive unit.
Extra snails and tools included.
Including manual.
This listing is for a 2000 K-TRON K2-MV-T60/DR Twin Screw Volumetric Feeder.
Precise medium rate volumetric feeding of materials from free flowing powders and granules to very hard- to-handle powders. Twin-screw feeder with interchangeable feed screws as part of its modular design. All parts in contact with the material are stainless steel. Feeder is easy to dismantle for quick cleaning and change-over. All material contact surfaces are 316 ss.
Izgy7jxk3
Stock Code: BFPP015a
WEBER DS 12:22D, Year 1991
TWIN SCREW EXTRUDER
Application: PVC pipe
Kssyn2td
Drive: 120 KW
Output: approx. 800 kg/h PVC (powder)
Screws and Barrel very good
General condition: very good, ready for use
Delivery time: immediately
One Screw Extruder - With Hot Air Pelletizer
For Materials like:
Regrind , HDPE , LDPE , PVC , PS etc.
(Film , foil material)
Ithuaw2
- Gear Motor DC 18,5 kW
- Screw D-130 mm
- Forced Feeding System
- Degasation
- conveyor fan
- Big Bag Station
* General * SKU103Y799 * LocationBarneveld * MakeBaker Perkins, Stoke on Trent * TypeMPC/V30 * .65034 * Key Features * Double screw extruder(1x) * Screw diameter30mm, Screw length 420mm * L/D14 * Co-rotating * Number of heating zones:3 (6x 200 Watt per zone) + die heater * Electric heating * Water cooling * DC-motor3,0 KW, 180 Volt * With variable speed drive * Feeding with metering screwdia. 32mm * Used ontoner * Information * Year of constructionunknown * Floorspace2,0x0,9 M * Total height2,0 ...
Screw diameter: 70 mm,
screw length: 24 D ( 1680 mm)
drive power:: 70 kW
Vuyvlfe
Heating capacity: 8 kW
Cooling water consumption: 500 L/h
Equipment:
3 heating zones
Suction conveyor (Pump + funnel 90L);
melting pump Maag, Type: Extrex 36-3 ST
Melt pressure sensor (Dynisco)
IDE-o/c 204014
SINGLE SCREW CO-EXTRUDER MEB 20/5x25D
- NEW machine from IDE-stock program
- mobile on 4 swivel castors
- manual height adjustment ± 200 mm via threaded spindle
- control cabinet integrated in the frame
- control via PLC Control 20/4
* operation via 5.7" touch panel
Bovy3gd8ze
* screw on/off
* screw speed
* screw speed display
* display motor load
* heating on/off/lowering value
- emergency stop button on the control cabinet
- incl. connection cable 5 m long with CEE p...
set of barrel and twin-screws for KRAUSS-MAFFEI KMD 105
Blnbdbwe0
Technical data:
Per pump
380/ 460 V
1450/1740 L/min
15/18 kW
Article NR:. 121816894/0007
Vq0zwm
Manufacturer price: 14500,-€
* General * SKU095Y843 * LocationBarneveld * MakeWerner & Pfleiderer * TypeZSK-170 W-1750 5G * .221 071 * Key Features * Double screw extruder(1x) * Screw diameter170mm, Screw length 2500mm * L/D14,7 * Co-rotating * Electric heatingon housing no. 2, 3, 4 en 5 (65,8 KW) * DC-motor760 KW, 6000 Volt * Screw speed± 198 Rpm * Used onDMD * Information * Year of construction1986 * Without switchgear * Floorspace14,0x4,0 M * Weight21.000 KG * Extra Specifications- With sieve changer SWZ-1200 Oval + hydr...
Screw diameter: 18mm, documentation available.
Ervksnn00
WEBER DS 10.22
Make: WEBER
Type: DS 10.22
Offk2
Year of construction: 1991
Screw diameter: 2 x 106 mm (parallel)
Effective screw length: 22: D
Screw speed: approx. 1 - 30 1 / min.
Drive motor: DC motor 75 KW
Control: Computer controlled
Cylinder heating / cooling zones: 10/5
Mold heating zones: 8
Degassing zone: 1 vacuum pump
Output: approx. 500 - 600 kg/h for rigid PVC pipes, depending on the material and product
Eurotherm EM 2 controller
Connected load: 220 kW
Dimensions:
(Wit...
45/28 single-screw extruder
Bsy3yamcye
Single One Screw Extruder
Motor 2,2 kW
Die Head available
Feeding system available
waterbath and pelletizer available
Visit and Trial possible.
Blyy0saelf
* General * SKU054Z210 * LocationBarneveld * MakeLalesse Arnhem B.V. * TypeUniverseel * No.75-704 * Year of construction1976 * Key Features * Single screw extruder(1x) * Screw diameter47mm, Screw length 600mm * L/D12 * Number of heating zones:2 * Electric heating * AC-motor11,0 KW, 380 Volt * With variable speed drive * Screw speed± 20-123 Rpm * Feeding with hopper * Number of temperature controllers: * Information * With switchgear * Floorspace2,3x1,3 M * Total height1,7 M * Weight1140 KG What ...
Weight: 7t, operational hours: ca. 48,000h.
Ne7tosom
Diameter of the screw: 45 mm
Bimww8pdxv
Ratio of length to diameter: 25:1
Output: 20-30 kg/h
Rotation speed of the screw: 80 rev/min
Material of the screw barrel and the screws: 38CrMoAlA, nitrogen treated
Gear box: hard tooth face, low noise design
Heater: casting aluminum heater 2.5kw × 3
Heating areas of the barrel: 3
Main motor power: 11 kw
Speed adjusting mode: frequency conversion
Cooling for barrel: air flow cooling, 3- areas
Height of the screw axes: 1.000 mm
Temperature controller: RKC
...
New Single Screw Extruder
Motor AC 2,2 kW
Bhqfi0tp8v
Optional Pelletizer and Waterbath
* General * SKU004K022 * LocationBarneveld * MakeKraftanlagen Heidelberg * TypeST-350/6D * No.91.02 4295916 * Year of construction1991 * Key Features * Single screw extruder"Pin extruder" (1x) * Screw diameter350mm * L/D6 * With jacket * DC-motor180 KW, 440 Volt + 53,7 KW, 400 Volt * Inlet350x285mm * Screw can be heated * Information * Without switchgear * Floorspace5,5x1,7 M * Total height2,0 M * Weight11.000 KG * Extra Specifications- With die head for 167 strands - With die face cutter - Extr...
Screw diameter: 60mm x20D, power: 22.5kW.
Boskv9lyhm
Polymer dosing feeder is a device that is used in the plastics manufacturing process. Its main function is to feed the raw material evenly into the extruder in parts of the desired volume.
Screw dosing feeder are the most common and economical modification of the feed devices.
Twin dosing feeder can be used to feed powders and fine granules.
1. Gear motor: 1.1 kW.
2. Screw diameter: 50 mm.
3. Number of screws: 2 pcs.
4. Volume of bunker: 0.15 m3, the bunker is made of stainless steel.
5. Maximum...
* General * SKU011C013 * LocationBarneveld * MakeLeistritz * TypeZSE-110 * Year of construction1986 * Key Features * Double screw extruder(1x) * Screw diameter110mm * L/D20 * Co-rotating * Number of heating zones:4 * Electric heating * DC-motor10-110 KW * Information * .86.02.1822 * With switchgear * Sizes switchgear120x70x230 CM * Floorspace4,7x1,4 M * Total height2,2 M What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are re...
1. Diameter of the screw: 65 mm
2. Ratio of length to diameter: 25:1
3. Output: 30-60 kg/h
4. Rotation speed of the screw: 50 rev/min
Lmmjj7gv
5. Material of the screw barrel and the screws: 38CrMoAlA, nitrogen treated
6. Gear box: hard tooth face , low noise design
7. Heater: casting aluminum heater; 3 kw × 4
8. Heating areas of the barrel: 4
9. Main motor power: 22 kw
10. Speed adjusting mode: frequency conversion
11. Cooling for barrel: air flow cooling, 4-areas
12. Height of the screw axes: ...
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
10 valuable tricks for buying used machines online
How to receive 100% of our e-mails
Morlock Motors official partner of Machineseeker and Truckscout24
Photo gallery: the 10 strongest forklift trucks in the world
Sample sales contract for used machines in nine languages
