Used Concentricity Tablet Press for sale (12,776)

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,000 kg, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, volume flow: 795 m³/h, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced Gjdpfxszbxwis Afkobn • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, overall weight: 9,500 kg, year of last overhaul: 2025, filling opening width: 420 mm, filling opening length: 1,250 mm, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Gsdpszbxvlsfx Afkjbn Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The packing press has been fully overhauled in our workshop. The press is in very good condition; please see the demonstration video following the overhaul. The machine sustained transport damage whilst being moved. The control cabinet was damaged and slightly dented by a forklift truck, and the main switch (on/off switch) was damaged. These damages are reflected in the significantly reduced sale price and must be repaired by the buyer at their own expense. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Used Durma press brake Type AD S 30135 Capacity: 3050 x 135 tons Cybelec ModEva 15T CNC control Y1, Y2, X, R, Z1, and Z2 axes CNC controlled CNC crowning Gbjdjza U Twepfx Afken Amada / Euro clamping Includes a set of tooling

Condition: good (used), Year of construction: 2006, Used 4-meter CNC press brake by Bystronic Type PR 200 4100 Capacity 4100 x 200 tons Gbjdpsza U Nrefx Afkon Cybelec CNC control Y1, Y2, X, R, Z1 and Z2 axes Hydraulic upper and lower clamping Hydraulic CNC crowning Includes a set of tools

Condition: good (used), Year of construction: 1991, Used press brake from Safan Type CNCS 110 4300 Capacity 4300 x 110 tons Control system updated, ESA CNC control Y1, Y2 and X axes CNC controlled Equipped with a flat-bedding system / bending / hemming function Includes a set of tools Gbedpfx Ajza T Dbsfksn

Condition: used, 1x bending knife from a VOEST press brake Length: 4050 mm Weight: approx. 115 kg Gbedpfx Afozcgh Ejkjn For further dimensions see pictures

Condition: excellent (used), Year of construction: 2010, AMADA MODEL HFT 8025 80 tons capacity x 2500 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFT 8025 downstroke CNC Press brake Year 2010 Tonnage 100 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 2500 mm Open height 470 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 6100 kg Bed Length 2500 mm Bed Width 60 mm Open Height 470 mm Throat Depth 420 mm CNC Control Gbjdpfx Aju A Dgrsfkjn Backguage Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: good (used), Year of construction: 2012, functionality: fully functional, Strautmann bale press, type BaleTainer, pressing force 60 t, year of manufacture 2012 Technical data: Manufacturer: Strautmann Umwelttechnik Type: BaleTainer Year of manufacture: 2012 Pressing force 60 t Total connected power 30 kW Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 straps Bale weight up to 400 kg (3 straps) Binding: 4-fold vertical Dimensions: 5,348 x 2,113 x 2,752 mm (L x W x H) Weight approx. 7,280 kg Materials: Paper, cardboard, PET bottles, film Note: The press is in good working order and has been inspected and tested. A video can be found on our website or YouTube channel. Gbsdpjzcuz Tefx Afken Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors that may occur. The offer is subject to change, subject to prior sale, and may be withdrawn at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: excellent (used), Year of construction: 2015, Model Amada HFE MK2 5012 50 tons x 1250 , 4 axis CNC Press Brake Year 2015 Tonnage 50 tonnes Max. Bend Length 1250 mm Gedpfx Ajyym Hkjfkobn Stroke Length 150 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 55L Motor Power 6KW Weight 2550 Kg guarding Erwin Sick machine mounted light screen,side and rear interlocked fencing Dimensions Machine Length 2000 mm Machine Depth 2300 mm Machine Height 2300 mm Distance Between Side Frames 1035mm Beam width 60 mm Table height 960 mm Open Height 370 mm Throat Depth 100 mm

Condition: used, Year of construction: 1981, total length: 1,100 mm, total width: 1,800 mm, total height: 2,850 mm, Empty weight: 6.000 kg - Year: 1981 - Documentation available: No - CE certificate present: No - Serial number: 10340 - Drive system: Conventional - Press force [ton]: 100 - Max. stroke [mm]: 160 - Table length [mm]: 630 - Table width [mm]: 550 - Ram length [mm]: 1100 - Transport dimensions: 1100mm x 1800mm x 2850mm (l x w x h) Godpfx Ajxywkqofkebn - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1986, total length: 1,350 mm, total width: 2,550 mm, total height: 2,700 mm, Empty weight: 7.000 kg - Year: 1986 - Documentation available: No - CE certificate present: No - Serial number: 5499 - Drive system: Conventional - Press force [ton]: 63 - Max. stroke [mm]: 200 - Table length [mm]: 630 Gjdpfjx Ad Hksx Afksbn - Table width [mm]: 525 - Ram length [mm]: 1100 - Motor power: 20.0kW - Transport dimensions: 1350mm x 2550mm x 2700mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2000, total length: 1,000 mm, total width: 1,900 mm, total height: 2,000 mm, Colour: Grey Empty weight: 3.000 kg - Year: 2000 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 205570 - Drive system: Conventional - Press force [ton]: 160 - Max. stroke [mm]: 100 - Table length [mm]: 420 - Table width [mm]: 410 - Table bore diameter [mm]: 60 - Ram length [mm]: 120 - Ram width [mm]: 120 - Transport dimensions: 1000mm x 1900mm x 2000mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Gsdpfx Asy Ew Euofksbn VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1971, total length: 3,000 mm, total width: 2,000 mm, total height: 3,000 mm, Weight: 10.000 kg - Year: 1971 - Documentation available: No - CE certificate present: No - Serial number: 20956 - Drive system: Teach-in - Press force [ton]: 150 - Max. working width [mm]: 3050 - Column gap [mm]: 2500 - Backgauge depth [mm]: 750 - Tools included: Yes - Transport dimensions: 3000mm x 2000mm x 3000mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 1 Gbjdpfeybdknsx Afkjn Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2004, total length: 4,600 mm, total width: 2,200 mm, total height: 3,000 mm, Weight: 21.500 kg Price: On request - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 12.2235 - Drive system: CNC - Control system brand: Delem - Power [kW]: 33.5 - Number of axes [pcs]: 6: Y1+Y2+X+R+Z1+Z2 - Press force [ton]: 300 - Max. working width [mm]: 4300 - Column gap [mm]: 3700 - Crowning system: CNC-controlled - Punch holder: Hydraulic - Tool holder type: WILA-standard - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 4600mm x 2200mm x 3000mm (l x w x h) - Transport weight [kg]: 21500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Gsdpfx Afoyvt Dzoksbn Lukas van Rossum

Condition: used, Veneer press Feed-through press HOT Colombo Machine dimensions: 4400x1400 Gbsdpfownhvvex Afkjn Oil heated input/output is included 8 cylinders Complete with glue roller etc. - Documentation available: No - CE certificate present: No - Number of stages [pcs]: 1 - Number of cylinders [pcs]: 8 - Heating type: Oil heated Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1996, Technical details: pressure: 6,3 t throat: 170/180 mm stroke: 310 mm power capacity: 3 kW dayligth: 775 mm weight of the machine ca.: 1,5 t clamping table: 470 x 330 mm table height over floor: 800 mm Gedpotxdmwefx Afkjbn C-Type 1 Station *

Condition: used, Year of construction: 2022, power: 15.8 kW (21.48 HP), total length: 1,760 mm, total width: 1,040 mm, total height: 2,555 mm, overall weight: 3,000 kg, No. 3279 Servo press / servo eccentric press Huras NKV 180-650 Used, year of construction 2022 Servo press for automation tasks and punching processes Fields of application: try-out and pre-series production / production of punched parts / punched strip overmoulding / packaging / assembly Freely programmable speed profiles and motion sequences from 1 - 150 strokes/min Setup in inching mode with full press force Nominal press force 180 kN Stroke height 5 - 50 mm (freely programmable) Stroke frequency / number of strokes 1 - 150 strokes/min Ram adjustment +/- 1 mm BDC dimension / installation space at BDC 274 mm Passage left / right 210 mm Tool installation space / press table/ram surface 650 x 450 mm LW Table opening 490 x 140 mm LW Punching direction from left to right Drive technology dynamic servo direct drive Lenze Drive power 15.8 kW Operating pressure 5 bar Control Siemens S7-1500 Swivelling touchscreen panel Siemens Simatic HMI TPI1200 12” Dynamic servo feed unit VS-125 Transport dimensions approx. 1760 x 1040 x 2555 mm LWH Gbsdpfezc Ix Sex Afkjn Weight approx. 3000 kg Sale on behalf of customer, ex location near 35392 Gießen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: new, This 60 ton motorized workshop press has a movable cylinder (left-right) and a height-adjustable work table. Equipped with pressure control, 2 speeds, a joystick and a hand pump for precise pressing tasks. Made in Europe 60 ton workshop press electrically operated, manuf. RHTC – type M/H-M/C-2 This 60 ton motorized workshop press has a movable cylinder (left-right) and a height-adjustable work table. Equipped with pressure control, 2 speeds, a joystick and a hand pump for precise pressing tasks. The workshop press is produced in the Netherlands. Features Sliding cylinder (left-right) Integrated pressure gauge Pressure regulator Two-speed hydraulic unit Height-adjustable work table Gedpfx Aewfcq Nefkebn Joystick for cylinder operation Hand pump for precise press work Options: Foot pedal or hand remote control for operating this 60 ton workshop press V-block set for additional support

Condition: ready for operation (used), Year of construction: 1994, Brand: HSM Model: 155 VL Gbjdpfezc Hhxox Afkjn Year of construction: 1994 Pressing force: 157 kN Voltage: 400 Max. bale weight: 250 kg Bale dimensions: 110 x 70 x 95 cm Machine weight: 950 kg Machine dimensions: 144 x 100 x 234 cm Feed opening dimensions: 110 x 59 cm

Condition: good (used), Year of construction: 1971, pressing force: 630 t, Manufacturer: Sack & Kiesselbach Model: EP 630 Mode of operation: oil-hydraulic Table height: 1175 mm Stroke: 305 mm Tool installation height: 317 mm Gbsdowxw Amspfx Afkjn Rapid approach descending speed: 6.9 mm/s Pressing speed: 0.3 mm/s Return speed: 6.3 mm/s Drive power: 11 kW Electrics: 550 V / 60 Hz Information without guarantee.

Condition: excellent (used), Year of construction: 2015, With a view to optimized and energy-saving drives in the vehicle industry, significantly higher demands are placed on the components of the drive system. Higher power transmission and higher torques combined with smaller size are the challenges. This development has increased the demand for cold-formed splines. With the Vertical Splines Press (VSP) Sack & Kiesselbach provides the customer with a solution that offers technological and also logistical advantages compared to conventional technologies (such as roller burnishing or broaching). The relatively small and very user-friendly press can be configured both manually and as an automated system. In addition to the splines press, the customer can also obtain the appropriate die system and process technology from a single source. 1 used Vertical Splines Press make Sack & Kiesselbach type VSP 50/30 Year 2015 Technical data: Pressing force 500KN ram stroke 450 mm Closing speed 200 mm/s pressing speed 5,5 mm/s opening speed 120 mm/s table dimension 500 x 400 mm installation height 1000mm width between columns 530 mm splines cylinder speed 3-9,5 mm/s Dimensions Gbjdpfx Afegtty Tjkjn height 2900 mm width 3100 mm depth 1400 mm Drive power 8 KW Special equipment Digital measuring system Splines tool for internal splines

Condition: good (used), Year of construction: 2015, functionality: unexamined, - Total stroke: 300 mm - Maximum press force: 68.9 kN - Power: 0.3 kW - Min/max air pressure: 3 - 6 bar - Machine weight: 1250 kg Gbjdpfx Ajwxvwiofkjn

Condition: ready for operation (used), Year of construction: 1985, 1 used spotting press Manufacturer: REIS Gjdpfxjyb Stqo Afksbn Model: TUS 160 OK 200 Year of manufacture: 1985 Technical details: Press force: 200 t Table length: 2200 mm Table width: 1550 mm Installation height: 2200 !! mm Ram return force: 6,000 kg Table load capacity: 10,000 kp Total power requirement: ? approx. 25–30 kW Machine weight: approx. 30 t Space requirements: approx. 4 × 7 × 7 m Shipping dimensions: approx. 13.4 × 3 × 3 m

Condition: used, Year of construction: 1952, Type of machine: Down-stroking press Manufacturer: Godpfxowxw H Ee Afkjbn SACK&KIESSELBACH Model: EP500 Year of construction: 1952 Pressing force: 500 t Clear gap: 450 mm Location: In Germany

Condition: good (used), 1 used single-sided press Make: SACK & KIESSELBACH, year of construction: 1962,74 serial number 31900 Pressing force 630 t, stroke 310 mm Installation height 320 mm Working height 1200 mm Drive power 10 KW Gjdpfx Aeul U Svjfksbn