Used Horizontal Press for sale (18,200)

Condition: good (used), WF HHP 625 – Horizontal Press Year: 2006 Manufacturer: WF Maschinenbau u. Blechformtechnik GmbH & Co KG Germany Machine Model: WF HHP 625 Machine Type: Horizontal Hydraulic Press Technical Specifications: Maximum workpiece diameter: 625 mm Minimum workpiece diameter: 350 mm Maximum workpiece length: 325 mm Maximum press stroke: 750 mm Maximum press force: 2000 kN Siemens 840D control system Parker hydraulic components Hydraulic oil tank capacity: approx. 800 liters Required cooling water for hydraulic system: approx. 1000 l/h Cooling water inlet temperature: max. 25°C Air supply connection: 6 bar / ½” Ambient operating temperature: 10°C – 40°C Hydraulic Equipment: Main Hydraulic Motor: Manufacturer: Blumenbecker Type: 14BG 207-4AA 200L Power: 30 kW Voltage: 400V / 50Hz Speed: 1465 rpm Secondary Hydraulic Motor: Manufacturer: Blumenbecker Type: 7AA 132 S-4 Power: 5.5 kW Voltage: 400V / 50Hz Speed: 1450 rpm Hydraulic Pump: Manufacturer: Parker Type: PV080R1K1T1NSLD Internal Gear Pump: Manufacturer: Denison / Parker Type: T6CMYR20-1-R_00C1 Flow rate: 93 l/min at 1450 rpm Central Lubrication Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Hnedpfx Abezb Il Nekeu Oil Spray Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Machine Dimensions (Transport Position): Width: approx. 2600 mm Length: approx. 5800 mm Height: approx. 2400 mm Weight: approx. 20,000 kg Additional Information: Hydraulic horizontal press with automated loading/unloading preparation Robot loading interface prepared (robot not included) Transport and lifting drawings available Original manuals and technical documentation included

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, power: 44 kW (59.82 HP), input voltage: 400 V, input current: 68 A, table width: 2,250 mm, table length: 4,000 mm, OTT press – 4000x2250 mm working surface Hedpfoz Rn Sfex Abkonu Programmable control, heated platens, 8-cylinder hydraulic pressing system. Heated vertical working surface (can also be used horizontally). For sale in excellent technical condition!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, pressing force: 70 t, Equipment: documentation/manual, HSM HL 7009 Re / Li horizontal baler. The machine is in very good condition and regularly serviced by an authorized service center. This baler is designed for larger waste disposal projects in retail outlets and small and medium-sized central warehouses. Bales from the HL 7009 model have a cross-section of 1100 x 1100 mm and, with a bale length of 1200 mm, can weigh up to 600 kg, ensuring optimal utilization of the truck's payload. Pressing force: 700 kN Specific pressing force: 58 N/cm² Drive power: 10.5 kW Voltage / frequency: 400 V / 50 Hz Idle capacity (theor.): 42.97 m³/h Loading opening width x length: 890 x 1020 mm Hnodpsz Aaf Nsfx Abkeu Bale width x height x length: 1100 x 1100 x 1200 mm Total length x width x height: 5366 x 2525 x 2559 mm Bale weight: 600 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 40 t, bale weight: 350 kg, HSM HL 4010 Re / Li horizontal baler. Equipped with a loading tipper for the basket. Manufactured in 2015. Very good condition - regularly serviced by an authorized service center. Ready for use. Available for binding with wire, string, or polypropylene tape. Semi-automatic baler system with a 40-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Press force: 400 kN Transport width: 1,767 m Transport height: 2,489 m Transport length: 5,573 m Weight: 4,500 kg Drive power: 7.5 kW Hnodpoz Aaggofx Abkju Bale weight (depending on material): 300-350 kg Bale length x width x height: 750 x 1200 x 750

Condition: used, Double-column hydraulic press SCHÖN, type UTE 100 Special Special press with additional side press cylinders – vertical and horizontal, each with 100 tons capacity. Machine no. 1800, year of construction 1977 Rebuilt according to UVV standards in 09/1991 by Livenbrück Hedpfoz A R Irex Abkonu Vertical pressure force: 100 tons Vertical ram stroke: 150 mm Vertical installation height: 375 mm (400 mm) Horizontal pressure force: 100 tons Horizontal ram stroke: 60 mm Horizontal installation width: 600 mm Table surface: 600 x 480 mm Table opening: Ø 100 mm Ram surface: Ø 200 mm (vertical and horizontal) Piston rod: Ø approx. 240 mm (vertical and horizontal) Clamping pin bore: Ø 50 mm Ram stroke: 150 mm Installation height: max. 435 mm Table height above floor: 820 mm Oil tank capacity: approx. 375 liters Motor power: 15 kW Mains connection: 400 volts, 50 Hz - Column guidance via the large piston with anti-rotation device - Stepless press force adjustment - Adjustable pressure holding time for vertical and horizontal - Switching for working movement: vertical only or combined vertical and horizontal - 2-hand operation for stroke release - Control cabinet located on the side, fixed to the machine - Light curtain SICK, type LVU 306, for safety operation Space required for the press L x W x H: 2050 x 1550 x 2230 mm Weight: approx. 5 tons Good condition

Condition: as good as new (ex-display), Year of construction: 2026, Horizontal Bending press Zopf - model T 200 with automatic backgauge - programable backgauge 1000 mm with - year of construction 2026 - demo model - length of stroke 185 mm - weight 500 kg Bending capacity flat material mild steel 200x12 mm (with special tooling) with punch radius 5 mm and die V = 100 mm Touch screen with programming of the stroke and backgauge Hjdpsgrydbjfx Abksnu demo model

Condition: good (used), Tranklein BP bookbinding press for pad/block pressing The machine is in very good condition, fully functional, and ready for production. Power supply: 380V. Fast operation. Hydraulic power unit. Format: 340 x 260 mm. Stack height: 820 mm. Adjustable pressing force, max. 2500 kg. Weight: 250 kg. Mounted on casters for easy movement. Hnodpfxjz S Utlj Abkeu

Condition: like new (used), Year of construction: 2022, machine/vehicle number: DF0147, Pressure: 150 t Total power requirement: 20 kW Machine weight approx.: 11.5 t space requirement approx.: 8800 x 1800 x 2200 mm pressure setting infinitely variable via rotary control : 15-150 t cylinder diameter : 100 mm pressing speed (infinitely variable via joystick) : 0-9,9 mm/s servo motor : 2 kW cooling unit : 1 kW Oil tank (under press table): 350 l Oil cooling (electric): 1 kW (max) Hnedpfx Ajfxygwjbkeu Profile straightening press 150 T with two pressure cylinders. The straightening machine is prepared for the particular type of material by interchangeable rounded spacer elements. The replacement of the 10 inserts is done manually by simply pushing them into the holding grooves. The scope of delivery includes basic equipment for one profile. The program for the respective profile is then called up on the monitor. The monitor shows the ideal line and, in addition, an ascending and descending millimeter scale with 0.5 mm lines. The profile to be straightened is now placed on the left side of the table, pushed against a holder and clamped with a quick-clamping device. Both the holder and the quick-clamping device are mounted on a clamping plate for quick adjustment. This clamping plate moves on a linear guide from left to right and vice versa. Transport is by a chain drive and a servo motor. The movement is triggered by a joystick on the control panel. After the profile has been clamped, the operator moves the clamping platen into the press using the joystick. The travel speed is up to 100 mm per second, but can be continuously adjusted down to 10 mm per second. To do this, it is sufficient to pull the lever of the control system slightly less. A high-resolution camera now shows the profile in the press. The operator sees exactly the deviation from the ideal line. Depending on the need, he now pushes or pulls the profile to the desired accuracy. He then continues to move slowly through the press, seeing in detail on the monitor whether the profile is now straight. Depending on the need, he can now move the profile forwards or backwards and readjust it. After the profile has been straightened, it moves out of the press on the right and can be removed. If desired, the clamping platen now moves back to the loading position on the left or it is now loaded from the right to save time. The press may only be operated under the following conditions: Perm. ambient temperature: 5-60 °C Permissible relative humidity: at 20°C - 90%, at 40°C - 50% Height of the installation site NN: + 1000 m Perm. fluctuations E-mains: +/- 10%.

Condition: as good as new (ex-display), Year of construction: 2026, Horizontal bending machine T 400 Multi - ZOPF Hjdpfx Abofiqlfekjnu - with semi-automatic control - (99 bending programs each 16 steps) - hydraulic pressure 40 to. - length of stroke 250 mm - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 250 mm - motorcapacity 3,0 KW - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 950 kg - colour RAL5012 / RAL7015 - bending capacity: flat material max. 200x22 mm round tube up to 65 mm

Condition: good (used), functionality: fully functional, pressing force: 160 t, stroke length: 500 mm, operating speed: 30 mm/s, reverse speed: 40 mm/s, table width: 850 mm, table height: 780 mm, throat depth: 400 mm, oil tank capacity: 210 l, total length: 3,370 mm, total width: 1,730 mm, total height: 1,480 mm, overall weight: 6,500 kg, installation height: 400 mm, pressing speed: 3 mm/s, Equipment: documentation/manual, Hydraulic horizontal box press PYXWM-160. Manufactured by WMW VEB Dessau - 1978. The machine has been overhauled. Ready to work. Max. pressing force 160 tons. Piston stroke 500 mm. Piston speed: Forward 30 mm/sec Pressing 2.5 mm/sec Backward 40 mm/sec Height from base to center of piston 260 mm. Machine frame height 780 mm. Base length from support tool 600 mm. Support tool length 520 mm. Max. clamping width 1730 mm. Working clamping width 400 mm. Support tool height 400 mm. Support tool spacing min-max 240-1100 mm. Dimensions: Length 3370 mm. Width 1730 mm. Height 1480 mm. Frame width 700 mm. Engine power 11 kW. Hodpfx Aswndnusbkonu Oil tank capacity 210 liters.

Year of construction: 1987, condition: used, Press force: 10t, loading aperture dimensions X/Y: 580mm/900mm, bale width/height: 500mm/600mm, bale weight depending on material: approx. 100kg, motor power: 6.8kW, Control system: Siemens SIMATIC S5-100U. Machine dimensions X/Y/Z: 4700mm/1000mm/1540mm, weight: approx. 1200kg. The machine has been overhauled and is in good condition. Documentation available. An on-site inspection is possible. Hedpfx Abszybumokonu

Condition: as good as new (ex-display), Year of construction: 2024, tool height: 130 mm, pressing force: 12 t, bending force (max.): 12 t, Stierli bender 120HE horizontal press Horizontal bending machine, manual control with angle fine adjustment. Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Bending pressure 12 tons tool height 130 mm Hnedpeflc R Dsfx Abkeu Stroke 0-170 mm stepless Bending capacity 130x12 mm S235 Straightening performance light straightening work Pipe bending 3/8"-11/2" Demonstration machine year 2024 incl. hand and foot pedal Machine as good as new

Condition: excellent (used), Block press horizontal 5000 mm length 800 mm width 12 cylinders 5 hold downs Hnedpfx Asl D T D Esbkeu

Condition: as good as new (ex-display), Year of construction: 2026, Horizontal Bending press Zopf - model T 200 - year of construction 2026 Hnsdpfsdy Igzjx Abkeu - demo model - length of stroke 185 mm - weight 450 kg Bending capacity flat material mild steel 200x12 mm (with special tooling) with punch radius 5 mm and die V = 63 mm inclusive mecanical stop Digital Readout with programming of the stroke demo model

Condition: used, Technical details: pressure: 200 t stroke: ca. 200mm mm table surface area: L:1200xH:450 mm jaw width: 1000x200 mm total power requirement: 18 kW weight of the machine ca.: 15 t dimension machine xH: 4,5x1,5x2,2 m Beam - Straight Bending Machine Hjdpfx Abju Nfrpekenu - electric box (LxWxH:0,85x0,8x2,7m) - chuck intake: LxW 1200x220mm - chuck adjustment 200mm moveable - opening width of chucks 300mm - manual control accessories: - div. limit stops, tools, try square and marking gauges i.D. *

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, power: 3.2 kW (4.35 HP), input voltage: 380 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 100 mm, table width: 450 mm, table length: 600 mm, throat depth: 200 mm, ram plate width: 400 mm, ram plate length: 260 mm, clearance between the columns: 260 mm, overall weight: 2,600 kg, Equipment: CE marking, safety light barrier, 2001 Presse Ross 40V-4 40 ton mechanical press with Brankamp Prokos PK550/3 monitoring, Soprem powered decoiler and safety guarding. Manufacturer: Presse Ross Model: 40V-4 Machine Type: Mechanical Press Year: 2001 Condition: Very Good Includes: Brankamp Prokos PK550/3 Process Monitoring Control Soprem RMI 50 F1 Powered Auto/Manual Decoiler Interlocked safety guards Separate control panel with two hand control Machine Description Used 2001 Presse Ross Type 40V-4 40 tonne mechanical eccentric power press, complete with Brankamp Prokos PK550/3 process monitoring control, Soprem RMI 50 F1 powered automatic/manual decoiler, interlocked perimeter safety guarding and separate control panel with two-hand operation. This Italian-built Presse Ross 40V-4 mechanical stamping press has a nominal pressing capacity of 400 kN / 40 tonnes, an adjustable 7–100 mm ram stroke and variable operating speed of approximately 68–203 strokes per minute. The included Brankamp Prokos PK550/3 process monitoring system is designed for monitoring press-production parameters and identifying abnormal process conditions. Brankamp/Prokos systems of this type monitor manufacturing process signals such as pressing/forming forces and can be used to identify deviations during production. Technical Specification Manufacturer: Presse Ross Model / Type: 40V-4 Year: 2001 Serial Number: 02-0297 Press Type: Mechanical eccentric / flywheel press Nominal Press Force: 400 kN / approx. 40 tonnes Ram / Slide Guides: 4 Adjustable Stroke: 7–100 mm Ram / Slide Adjustment: 60 mm Maximum Shut / Closed Die Height: 275 mm Hnjdpfez Irbqex Abkju Variable Stroke Rate: Approx. 68–203 strokes/min Nominal Speed: 150 strokes/min Throat Depth: Approx. 200 mm Frame Opening / Passage: Approx. 260 mm Table Size: 600 × 450 mm Table Thickness: Approx. 55 mm Table Opening: Approx. 120 mm Ram / Slide Surface: 400 × 260 mm Tool Shank / Ram Bore: 50 mm Motor Power: 3.2 kW Motor Speed: 2,000 rpm Electrical Supply: 380 V / 50 Hz Maximum Flywheel Speed: Approx. 203 rpm Compressed Air Supply: Approx. 0.5–0.7 MPa Machine Weight: Approx. 2,600 kg Included Equipment Brankamp Prokos PK550/3 Process Monitoring Control Process monitoring equipment for monitoring press operation and production parameters, useful for detecting process deviations and helping protect tooling and production quality. Soprem RMI 50 F1 Powered Decoiler – 1992 Powered coil decoiler with automatic/manual operation, suitable for supplying strip material to the press for coil-fed production. Safety Equipment Interlocked safety guarding Separate operator control panel Two-hand press control Guard interlocking Emergency-stop controls Machine Highlights 40 tonne / 400 kN capacity Variable-speed mechanical press 7–100 mm adjustable stroke Up to approximately 203 strokes/min 600 × 450 mm bolster/table Brankamp Prokos PK550/3 process monitoring Soprem powered automatic/manual decoiler included Interlocked safety guarding Separate two-hand control station Italian-manufactured Presse Ross press Condition Used machine. Please contact us for further information, photographs, availability, inspection arrangements and pricing. Please Note: All specifications, dimensions, capacities and descriptions are approximate and provided in good faith. Prospective purchasers should independently verify all important specifications and machine suitability before purchase.

Condition: as good as new (ex-display), Year of construction: 2025, Horizontal Bending press Zopf - model T 100 - year of construction 2025 - demo model - length of stroke 200 mm - weight 320 kg Hedodibygopfx Abkonu Bending capacity flat material mild steel 150x10 (with special tooling) with punch radius 5 mm and die V = 63 mm inclusive mecanical stop Digital Readout with programming of the stroke demo model

Condition: used, Year of construction: 1979, machine/vehicle number: 14256, Stehendbogenauslage mit Presswalzenauslage - Horizontal Stack Delivery with Pressing Stahl SBP 40Year 1979 - Serial-No. 14256/79 Size width max. 400mm Vertical press delivery -modified with SELFControl- Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Hnsdsrgbz Eopfx Abkju

Condition: new, Year of construction: 2025, Hydraulic horizontal bending and straightening press - Fabrikat Zopf - Model T 800 - Multiprogramming of 99 programs each 16 steps - hydraulic pressure 80 to. - length of stroke 300 mm - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 300 mm - motorcapacity 7,5 KW - 400 V 50 hz 3 ph. - working height 940 mm - closed table - replaceable wear plate - weight 2100 kg - bending capacity: flat material max. 300x32 mm at Vmax round tube 3/8" - 3" gas pipe Hnjdpfxod A Nc Do Abkou

Condition: excellent (used), Continuous horizontal press, to compact and pack materials such as cardboard, paper, plastics and others. IMABE IBERICA brand, pressure 125TN, loading mouth 1800 * 1000mm, with blades on the top of the compaction carriage that allows cutting the excess material above the compaction tunnel. Folding compaction tunnel, both at the top and on the sides, for greater retention of the material, outlet for bullets of dimensions 1050 * 1100mm and adjustable length. Automatic tying system, lateral, by 5 wires, for high production 30-35ton / hour. Fully rebuilt and revised in 2019 Hnedpfov U R Agox Abksu

Condition: used, HORIZONTAL PRESS Hnedpfx Aboihvnmjkju PRESSURE 80t

Condition: new, Year of construction: 2023, Horizontal bending machine AH 40 - ZOPF - with semi-automatic control - hydraulic pressure 40 to. - length of stroke - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 250 mm - motorcapacity 3,0 KW Hodpeqvm Uksfx Abkenu - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 950 kg - bending capacity: flat material max. 150x22 mm round tube up to 60 mm

Condition: used, Bündelpresse / Bunch Press - horizontal La Fornigrafica BPHydraulische horizontale Bündelpresse / hydraulic horizontal bunch Press Pressdruck stufenlos einstellbar / Pressure steppless 0 – 2.500 kg Einsatzlänge / Infeed length max. 820mm Pressplattengrösse / Press plates size 340 x 260 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Hnedpfx Aeh R Udwjbkeu On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1994, machine/vehicle number: 49504, Stehendbogenauslage mit Markiereinrichtung - Horizontal Stack Delivery with Pressing - Marking Stahl SBP 46.2Year 1994 - Serial-No. 49504/94-218513 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Hjdpfx Ash Ax S Dobkonu Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: ready for operation (used), Year of construction: 2016, stroke length: 350 mm, total width: 3,350 mm, total height: 5,500 mm, overall weight: 100,000 kg, product length (max.): 4,100 mm, Mechanical stamping press manufactured in 2016. This HIM HWAIL PRESS HCDS-600 features a press capacity of 600 tons and a stroke length of 350 mm. It includes a slide area of 2900 x 1300 mm and a bolster area of 3000 x 1400 mm. If you are looking to get high-quality stamping capabilities, consider the HIM HWAIL PRESS HCDS-600 machine we have for sale. Contact us for further details. • Press capacity: 600 ton • Rated tonnage point above B.D.C.: 7 mm • Number of strokes: 30 SPM • Stroke length: 350 mm • Die height: 600 mm • Slide adjustment: 120 mm • Slide area (L x W): 2900 x 1300 mm • Bolster area (L x W): 3000 x 1400 mm • Bolster thickness: 240 mm • Working height: 1300 mm • Side opening: 1450 x 750 mm • Main motor: AC 55 kW x 4 / VS 75 kW x 4 • Slide adjustment motor: 5.5 kW x 6 • Air pressure: 5 kg/cm² • Die cushion capacity: 16 x 2 ton • Die cushion stroke: 130 mm Hjdpfx Abez Sqf Rsksnu • Pad area (L x W): 1400 x 650 mm • Quantity available: 5 units • Pricing note: indicated price is per individual machine Additional equipment • Shuttle transfer robot/system • Included when purchasing the complete package of machines • Available separately at EUR 120,000 Technical Specification Stamping Force 6000 Kn