Used Combined Drawing for sale (5,031)

Condition: used, Dimensions (LxWxH): 1084x996x1782mm Brand: FRIMA (Rational) Model: FSCC WE 202 Type: Combi oven (steam / convection) Manufacture: Germany Protection rating: IPX5 Use: Professional kitchens (restaurant, hotel, canteen) 20 levels for GN 2/1 or 40 levels for GN 1/1 trays Production capacity: 300 to 500 meals/day Steam: 30°C – 130°C Hot air (convection): 30°C – 300°C Combined steam + hot air: 30°C – 300°C Voltage: 400V Power: 65.3kW Weight: 370kg Main functions - roasting - steaming - grilling - braising - baking / pastry - regeneration (finishing) Isdpfx Amsyu Id Eo Ijar Connections Water pressure: 150 – 600 kPa (1.5 – 6 bar) Water inlet: R 3/4 Smart features - SelfCookingControl system - Automatic cooking by food type - 5 fan speeds - Humidity control - Automatic cleaning - Core temperature probe - Cooking program memory

Year of construction: 2010, condition: ready for operation (used), A large-format vacuum thermoforming machine Geiss with two window plates is available. Heating power: 360kW, connected load: 370kW, window plates: 2, min. window plate dimensions 1: 1360mm/860mm, max. window plate dimensions 1: 2460mm/1460mm, window plate adjustment 1 X/Y: 1100mm/600mm, min. window plate dimensions 2: 940mm/520mm, max. window plate dimensions 2: 2400mm/1400mm, window plate adjustment 2 X/Y: 1460mm/880mm, materials: PS/ABS/TPU/PMMA. Total system dimensions X/Y/Z: approx. 9150mm/2350mm/4000mm, total weight: approx. 15500kg, control: Siemens Simatic Panel PC, operating hours (April 2026): approx. 20100h. Documentation available. An on-site inspection is possible. Without vacuum pump, spare parts and temperature control unit. Expected to be available from October 2026. Iedpfx Ajy Aafrsm Ioar

Condition: good (used), Two-knife cutterhead Working width 620 mm Table length approx. 2000 mm Height adjustment via handwheel Sturdy cast iron construction for low-vibration operation and precise results Transport dimensions approx. 2020 x 1300 x 1100 mm Cutterhead knife length 630 mm Iaodjy Dculjpfx Am Ijr Motor bearings were replaced around 2003. All information supplied without guarantee!

Year of construction: 1999, condition: ready for operation (used), machine/vehicle number: 9920268, GEISS DU2000 T7 Vacuum Thermoforming Machine • 1999 • 2000 × 1000 mm • Halogen Heaters • Sinumerik Control Iedox Uz Ncepfx Am Ioar Industrial vacuum thermoformer with large 2000 × 1000 mm sheet capacity and deep draw capability up to ~650 mm. Equipped with high-speed halogen flash heaters, Sinumerik heater control, three vacuum pumps, plug assist, auto sheet loader, and motorized window plates for rapid tool changes. Excellent for high-volume thermoformed parts production.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, power: 5.5 kW (7.48 HP), planing width: 410 mm, planer shaft diameter: 100 mm, Equipment: low noise, Jointer-thickness planer ADH 5-410 *available at short notice* Demonstration machine from showroom (factory set and planed). -Spiral knife planer shaft with 66 knives (3 rows of 22 knives each) 15 x 15 x 2.5 mm --Plane width 410 mm -Working table format planer1800 x 410 mm Working table format Iaodpfxehm Stpj Am Ier -Thickness planer 700 x 406 mm -Planer shaft diameter100 mm -Planer blade speed 4500 rpm -Cutting depth planer max. 5 mm -Anodized planing fence Format L x W 1100 x 155 mm -Adjustable blade shaft guard Standard -Suction nozzle diameter 120 mm -Thickness planer width 406 mm -Thickness passage min - max 4 - 225 mm -Chip removal thickness planer max. 4 mm -Feed speed 8 m/min -Motor power 400 V / 50 Hz4.0 kW -Digital display thicknessing table adjustment standard -Space requirement L x W approx.2000 x 1000 mm -Weight approx. 450 kg -Can be driven under with pallet truck Standard -Light gray/graphite gray 7035/7024 paint finish

Condition: good (used), Year of construction: 2020, functionality: fully functional, Length approx. 2250 mm, width/depth approx. 1370 mm Weight approx. 695 kg, Jointer: Maximum chip removal 5 mm Extraction connection: Extraction nozzle Ø120 mm Thickness planer: Working height min. 3 mm Working height max. 240 mm Minimum workpiece length 220 mm Maximum chip removal 5 mm Drive motor power 7 kW Connection voltage 400 V Ijdsykaqcepfx Am Iear Mains frequency 50 Hz Planer shaft type TERSA 4 planer knives Speed 5000 rpm Maximum planing width 520 mm Feed: Feed speeds 5/8/12/18 m/min Very good condition Available around September 2026 Shipping possible at extra cost!

Condition: used, functionality: fully functional, power: 34.6 kW (47.04 HP), fuel type: diesel, color: orange, operation weight: 3,730 kg, Year of construction: 2013, operating hours: 5,950 h, Hamm HD14VT combination roller Year of manufacture: 2013 Iaedpey A R S Njfx Am Ijr 5,950 operating hours 34.6 kW Kubota engine 3,730 - 4,960 kg Edge cutter wheel Protective canopy

Year of construction: 2004, condition: ready for operation (used), Ultrasonic die polishing machine / Wire drawing machine Esteves-DWD 107D16 Year of manufacture: 2004 230 V 20 kHz 4–6 bar Iajdpfx Amoyxxy He Ior

Condition: good (used), For sale is a used Robland 5-function combination machine with a cutting length of 1950 mm. The machine is in good condition and has been reconditioned and inspected by our technical staff. Technical data: - Cutting length: 1950 mm - Cutting width: 700 mm - Cutting height: 102 mm - 2 spindle speeds - 3-knife cutterblock - Planing width: 310 mm - Suction connection: Ø 100 mm - 3 motors, each 3 kW / 4.1 HP - incl. mobility kit and power feed Iajdpfxeyznuxs Am Ijr The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: combination machine, combined machine, planer, thicknesser, thicknessing machine, panel saw Reference: R-A3168

Condition: good (used), Year of construction: 2014, operating hours: 42,000 h, functionality: fully functional, 1 combined heat and power unit for natural gas (convertible to other gas types) Output: 800 KW electrical 800 KW thermal Manufacturer: G2 Engine: MWM, type TCG2016 V16C Operating hours: 42 000 Year of construction: 2014 Complete system in container (12 x 4.5 m) with all heat exchangers, switch cabinets, power supply All maintenance intervals carried out by the manufacturer. Ready for immediate use! Iodpevgbdrofx Am Ioar Further details on request

Condition: used, Year of construction: 1986, L-beam 120 x 13 mm hole punhing press: pressure 60 t hole punching press: throat 510 mm hole punching press: capacity (dia. x thick.) Ø 27 in 17 mm shear: flat material 500 x 14 mm shear: flat material 400 x 16 mm shear: flat material 180 x 20 mm shear: flat material 120 x 21 mm Iajdpfx Ajt D Nz Asm Ior shear: flat material 100 x 22 mm total power requirement 7,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic Section Shear - Combined

Condition: used, Flat Pile Feeder Folding Machine Stahl KC 56/6-KTL for 16 pages Cross Fold and 6 buckles 2 knives with Side buckle Falzmaschine / Combination Folding Machine Stahl KC 56/6-KTL 16 Seiten Falzmaschine / 16 pages Cross Fold Year 1990 - Serial-No. 41655/90-169032 Arbeitsbreite max. 780mm / Working width max. 780mm Flachstapelanleger / Flat Pile Feeder 1. Station 6 Taschen / 1. Folding Unit 6 Buckles 2. Station 2 Schwerter mit Seitentasche / 2. Folding Unit 2 knives with Side Buckle Leimeinrichtung Planatol / Gluing unit Planatol Schuppenauslage / Stream delivery Stahl SAK Inklusive Kompressor und Handbücher / Included Compressor and Manuals Iaodpfx Aoyw Hg Som Ior Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Year of construction: 1995, power: 22 kW (29.91 HP), pressing force: 120 t, stroke length: 400 mm, table width: 1,250 mm, table length: 1,000 mm, table height: 950 mm, retraction force: 5 t, total length: 2,100 mm, total width: 2,050 mm, total height: 3,800 mm, control cabinet height: 1,900 mm, control cabinet length: 600 mm, control cabinet width: 500 mm, installation height: 900 mm, Equipment: safety light barrier, Deep drawing press, press power 120 to, stroke 400 mm, distance between tabels 900 mm, with oil cooler, light security bareer, dimension 2100x2050x3800 mm, weight ca. 13400 kgs Iajdpfjycin Ujx Am Ijr

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: M38L/9009, Offer Number: M38L/9009 Machinetype: pre-drawing machine Make: FASTENER ENGINEERS Type: DTVA 2050-36 Constr. year: 1997 diameter range: max 18 mm feeding speed: max 15 m/m Iaedjwxdkqspfx Am Isr capstan diameter: 900 mm output: 20 HP Location: In our warehouse

Condition: used, Year of construction: 1973, pressure 1600 t distance between columns 3160 mm ram stroke 1450 mm distance table/blankh.,max. stroke up,adjustm. up 2250 mm table surface area 4000 x 2200 mm ram pressure 1000 t pressure of blank holder 600 t stroke of blankholder at the bottom 1000 mm stroke of blankholder with adjustment 0-100 mm 1450 mm blank holder size 4000 x 2200 mm die-cushion pressure inside the table 360 t stroke of drawing cushion in table 275 / 400 mm ram surface 4000 x 2200 mm column travel -side 1100 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled oil volume 9000 l total power requirement 390 kW weight of the machine ca. 250 t Iodpfx Amovxwhwj Iear dimensions of the machine ca. 6,0 x 4,3 x 10,5 m Head press (1600 tons) of a press line with five subsequent presses (800 tons)

Condition: used, BROKERAGE MACHINE – PRIVATE SALE Iajdpfxeymxxdo Am Ior For sale: Emco Rex 2000 3-function combination machine. Technical data: - Planing width: 260mm - Milling machine - Long-hole mortising attachment For questions, please contact the seller directly: Mr. Florian Gerbenjak Machine location: 5422 Bad Dürrnberg

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally Iaodpfxeyupulo Am Ier - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Condition: used, power: 49 kW (66.62 HP), fuel type: diesel, color: yellow, operation weight: 8,500 kg, Year of construction: 1987, operating hours: 11,000 h, Equipment: cabin, ABG Puma 169 A combination roller Iasdpfxoyz Twfe Am Ier Year of manufacture: 1987 11,000 operating hours 8,500 kg Articulated joint 49 kW Deutz engine F3-6L 912, 4 cylinders

Condition: good (used), Code: 0344 Brand: SCM MINIMAX Model: FS 41/C - CE Standard 3 Works combined machine (Surface/ Thickness/Mortiser) for wood, carpentry, furniture, window frames , doors, plastics, and various - CE Standard Technical data: Planer shaft with n° 3 “Tersa” knives Working width 410 mm Iaedpfjyxfy Hox Am Ijr Total length of surface tables 2000 mm Guide inclination 90–45° Thickness table dimensions 410 x 605 mm Thickness feed speed 7 m/min Thickness min/max working height 3/230 mm Three-phase motor 6,5 Hp Cast iron mortiser: table dimensions 430 x 220 mm Spindle connection diameter 16 mm Wheels for moving the machine Suction port diameter 120 mm Overall dimensions mm 2000 x 1000 x 1100 h Weight kg 340

Condition: new, Multipurpose combination machine with aluminum sliding table for sawing, milling, surface and thickness planing, and optional long-hole boring Torsion-resistant steel and cast iron construction Machine table made of cast iron, hardened and ground Smooth-running anodized aluminum sliding table, 10-year SCM warranty on slideway wear Large crosscut frame with extendable aluminum telescopic fence and flip stops Combination saw and mitre fence with 45° quick adjustment Max. saw blade diameter 315 mm with optional scoring unit, tiltable from 90° to 45° Helical steel feed roller for consistent timber feed during thickness planing Four spindle speeds, manually selectable Standard with forward/reverse spindle rotation Three independent motors for each working unit Sliding table with ball contact system Fitted with the proven million-fold SCM ball contact system Consistently smooth operation due to hardened and ground guides Not susceptible to dust and dirt thanks to minimal contact point between ball and trapezoidal rail The extraction ports for surface and thickness planing are located on the same (right) side, so the same extraction hose can be used for both planing operations. Helical steel infeed rollers for constant and even workpiece feed Massive anti-kickback pawls for operator safety 3-knife cutterblock ensures optimum planing results Crosscut length: 1600 mm Max. saw blade diameter with scorer: 315 mm Max. cutting height at 90° / 45°: 100/79 mm Max. crosscut width left of blade: 1660 mm Cutting width at rip fence: 800 mm Saw shaft speed: 3500 rpm Saw blade tilt: 90° - 45° Working width: 300 mm Surface table length: 1260 mm Cutterblock diameter / number of knives: 72 mm / 3 pcs Table dimension: 300 x 450 mm Ijdpfsiiyppjx Am Iear Min. / Max. working height: 3 mm / 220 mm Max. stock removal: 4 mm Feed speed: 7 m/min Spindle diameter: 30 mm Usable spindle length: 100 mm Max. retractable tool diameter: 180 mm Spindle speed: 3500/6000/8000 rpm Motor power: 3 x 4 kW, 400 V, 50 Hz Extraction port diameter: 4 x 120 mm Saw blade guard extraction port Ø: 60 mm Weight: 430 kg OPTIONS: - Professional fences EUR 300.-- Saw fence with quick lock and micrometric adjustment Surface planer fence 90° ÷ 45° continuously adjustable - Scoring unit incl. blade EUR 292.-- - Handwheel with digital readout for thickness table positioning EUR 129.-- - Mobility kit EUR 119.-- - 2 additional handwheels for unit adjustment EUR 45.-- - TERSA cutterblock, diameter 72 mm EUR 212.-- - Xylent spiral cutterblock with 3 rows of knives EUR 717.-- - Aluminum long-hole boring device EUR 390.-- - 2 flip stops for crosscut fence EUR 150.--

Condition: good (used), functionality: fully functional, Coil weight: 350 kg Maximum strip width: 200 mm 11-roller straightening unit Further data to follow Iajdpsyzca Ajfx Am Ior

Condition: used, Year of construction: 2014, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, planing width: 410 mm, rotational speed (max.): 6,000 rpm, total length of planing tables: 1,800 mm, overall weight: 355 kg, number of planer blades: 3, planer shaft diameter: 72 mm, - Year of manufacture: 2014 - Not repainted - After technical inspection Iodpsw H R I Sjfx Am Ijar - Operating manual, technical documentation (DTR) TECHNICAL SPECIFICATIONS: - Planing width: 410 mm - Number of knives: 3 - Rotational speed: 6000 rpm - Cutterblock diameter: 72 mm SURFACE PLANER: - Planing width: 410 mm - Max depth of cut: 4 mm - Jointer table length: 1800 mm - Fence length: 150 x 1100 mm THICKNESSER: - Planing width: 404 mm - Table length: 600 mm - Planing height min/max: 4/225 mm - Feed speed: 6 m/min - Motor power: 4 kW - Voltage: 3×400 V - Extraction port diameter: 100 mm Machine overall dimensions: - Length: 1950 mm - Width: 800 mm - Height: 1090 mm - Weight: 355 kg

Condition: excellent (used), Catalogue number 6309 TECHNICAL SPECIFICATIONS SURFACE PLANER: - shaft width: 510 mm - 3-knife cutterblock - adjustable tilting fence - table length: 1910 mm - both tables adjustable THICKNESSER: - max thickness of processed element: 200 mm - thicknesser cutterblock guard from above: - anti-kickback fingers - geared feed roller - planing cutterblock - smooth outfeed roller Iajdjyyymkjpfx Am Isr - stepless feed speed adjustment: 7–14 m/min - main motor approx. 4 kW - cutterblock speed: 3000/6000 rpm - dimensions (LxWxH): 1910x870x970 mm - weight: 780 kg – Italian manufacture – Very good condition, used machine Net price: PLN 14,500 Net price: EUR 3,450 Net price calculated at exchange rate 4.2 PLN/EUR (price may change in case of major exchange rate fluctuations)

Condition: new, Catalogue No. S0336 TECHNICAL SPECIFICATIONS - Surface planer table length: 1800 mm - Working width: 410 mm - Working height: 225 mm Iedpfx Asyyylajm Isar - Spindle speed: 4500 RPM - Number of knives: 4 pcs - Spindle diameter: 100 mm - Motor power S1: 4/5.6 kW - Voltage: 400 V - Dimensions (L/W/H): 1900/800/1300 mm - Weight: 495 kg Four-knife cutterblock ensures precise machining, High-grade construction and finish, Foldable planer tables to the rear—do not limit thicknesser functionality, Table made of grey cast iron with ground surface, Adjustable thicknessing rollers for optimal workpiece feed, Sturdy tiltable fence adjustable from 90° to 45°, Precisely mounted reversing knife spindle, Thicknesser table with central column guidance and stabilizer, Space-saving side-mounted profile fence. Scope of delivery: – Knives (installed), – Heavy profile fence, – Two rollers in the lower thicknesser table Optional equipment: – Horizontal borer, – Spare knives 410 x 25 x 3.0 mm Net price: 15,700 PLN Net price: 3,710 EUR (based on exchange rate 4.2 EUR) (Prices may vary due to significant exchange rate fluctuations)

Condition: used, Year of construction: 1980, pressure 250 t distance between columns 2000 mm stroke 600 mm Distance table/ram, stroke up 1000 mm table surface area 1700 x 1300 mm table height over floor 800 mm die cushion pressure in table 100 t die cushion stroke in table 180 mm Die cushion area in table 1650 x 700 mm Iaedevut Tnspfx Am Ier side window 1000 mm ram surface 1700 x 1400 mm weight 31,1 t dimensions (WxDxH) 3,3 x 1,9 x 4,85 m Height above floor 4,55 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic cutting impact No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F