Used Collection Machine for sale (66,363)

Condition: used, station gatherer 27 Kdodpfxjwk Edcj Anwen hand feed station criss cross delivery Free standing Max. signature size 320x460 mm Min. signature size 75x150 mm Max. block thickness 7,000 sheets/h.

Condition: used, functionality: fully functional, Outfeed vibrator, right-hand side Tower with 10 stations, DC 10/60 vacuum air system, Duplo 5000 with touch panel control LS1 transfer bridge Kdsdpfx Anszccbnewjn DBM-400 booklet maker with two Hohner saddle stitch heads, 48/5 S DBM-400 trimmer DBM-LS long shingle stacker

Condition: excellent (used), 1 tower DC 10/60 DBM 500 Kedpfx Aovttxhsnwsdn DBM 500 T

Condition: excellent (used), Horizon VAC 100a/100m Trimmer Kodpfsxtwy Esx Anwsdn Sewing SPF20A FC20A

Condition: excellent (used), Duplo System 5000 Year 2007 Kodpfx Anjxtwyxewjdn Trimmer DBM 500 2xDC 10/60

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 020100506, Used Duplo DBM-400STL left-side high-pile stacker/delivery unit for compatible Duplo collator and bookletmaking systems. The DBM-400STL is a floor-standing, high-capacity stacker designed for stable and organized delivery of collated sets. It is suitable as a replacement unit, spare unit, or system extension for compatible Duplo System 4000 / System 5000 / DC-10/60 configurations. Main features: Left-side stacker version: DBM-400STL High-pile/high-capacity stacker Straight stacking and offset stacking Floor-standing construction on wheels Suitable for compatible Duplo collator/bookletmaking systems Ideal as a replacement unit, spare unit, or extension for an existing Duplo line Industrial Duplo construction Made in Japan Technical data: Model: Duplo DBM-400STL Type: left-side stacker/delivery unit Paper size: 210–350 mm width, 139–500 mm length Stacking mode: straight stacking/offset stacking Maximum speed: up to 9,000 sets/hour Stack capacity: approx. 430 mm Maximum set thickness: approx. 6 mm Dimensions: approx. 750 × 915 × 890 mm Weight: approx. 125 kg Power supply: 220–240 V / 50–60 Hz / 1.2 A Kdodezbu Iqspfx Anwsn Year of manufacture: 2001 Serial No.: 020100506 Important note: This is a system accessory for compatible Duplo collator/bookletmaking lines. The buyer should check the required interface and connection with their existing Duplo configuration before purchase. Condition: used, available for inspection Location: Budapest, Hungary

Condition: good (used), Collator Horizon VAC-60Ha + PJ-77R This machine is in very good condition, has low mileage, and is ready to work. Machine setup is controlled from the control panel. Made in Japan. Horizon VAC-60Ha Max size: 350x500mm Min size: 120x148mm Vacuum pick-up Collect speed up to 10,000 sets/h 6 shelves Stack height: 130mm Weight: 40-300g 230V power supply Weight: 315kg Controlled by a touchscreen and a mobile remote control. Jam, double-feed, and no-feed sensors Ability to save 9 preset jobs to the machine’s memory Kjdsy Sfbwepfx Anwjdn Factory set of tools and accessories, manual.

Condition: good (used), Year of construction: 1998, Stitching, folding and cutting machine, Theisen Bonitz TB Sprint 808 08, machine number: 303QS2198, year of manufacture: 1998, 2 Hohner stitching heads, front trim, in good condition, available immediately. Kdsdpfex S Iwzex Anwen

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, 10 stations with air Folding and stitching unit System 3000 with front trimmer Pressing station Standard accessories Location: in stock / Untermeitingen Kdedpfxjy Dtx Us Anwjn

Condition: refurbished (used), Year of construction: 2002, Horizon VAC 100 A+C brochure line Staple-fold station SPF 20A, trimmer FC 20A Jogger PJ 77R Ksdpfoyl Aiwox Anwsdn

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 303 CS 2816, total width: 2,000 mm, total length: 8,000 mm, total height: 2,000 mm, Equipment: compressor, Collating Machine Theisen & Bonitz tb sprint 303 CS – 8 Stations – with Stitching Unit – Year of Manufacture 1999 For sale is a Theisen & Bonitz tb sprint 303 CS collating machine featuring 8 collating stations and an integrated stitching unit. This machine is ideally suited for producing brochures, booklets, catalogues, and multi-page print products, and is a proven solution for print shops and finishing operations. The robust construction of the tb Sprint series ensures reliable and long-lasting performance. Thanks to its compact design and user-friendly operation, the machine is suitable for smaller production lines as well as for integration into existing setups. Technical Data Manufacturer: Theisen & Bonitz Model: tb sprint 303 CS Year of Manufacture: 1999 Machine No.: 303 CS 2816 Number of Stations: 8 Equipment: integrated stitching unit Application: brochure and booklet production Condition Used, commensurate with age. Scope of Delivery Machine as described and shown in the photos. Kdodsyucwgjpfx Anwon Inspection / Availability Inspection possible by appointment. Immediately available – subject to prior sale.

Condition: used, TMF Neckar collecting machine Kdjdey Rk Iyjpfx Anwjn

Condition: excellent (used), Year of construction: 2013, Hugo Beck Rotary Feeder TA 4415 The rotary feeder is the most frequently used feeder in the graphic sector. It feeds products into a packaging or inserting machine. Thanks to its rapid adjustability—from very thin to comparatively thick products—the rotary feeder is suitable for a wide range of different items. All versions are characterized by high flexibility, motorized height adjustment, as well as independent drive and control systems. Technical Data: Length: 70–400 mm Width: 90–440 mm Kedoyk Eqhjpfx Anwodn Height: up to 8 mm Output: up to 15,000 cycles/hour

Condition: good (used), Year of construction: 2014, functionality: fully functional, Horizon Auto Creaser including: • Format: Max. 364 x 865 mm/Min. 105 x 180 mm Kdedpfx Aox N S Nvjnwon • Sheet weight: 80 to 400 gsm • Coated paper (Gloss, Matte): 105 to 400 gsm • Feeder stack Height: Max. 150 mmor 5.90” • Number of impact crease Lines: Max. 10 Creasing Lines • Production Speed: 5,000 sheets per hour (A4, short-edge feeding, one creasing line)

Condition: ready for operation (used), Year of construction: 2008, Theisen & Bonitz tb sprint 310 VP / 304 QSM / 503 stitch- fold- trimming unit 304 QSM 2 stitching head Hohner Universal 48/5 front cut stream delivery TB 503 - 2008 - Theisen & Bonitz tb sprint 503 form punching, multiple ups inline with Theisen & Bonitz tb 303 or tb 304, or offline Kjdpfx Ansxnb Agswsdn Delivery time: immediately from stock

Condition: ready for operation (used), Year of construction: 2003, 7-station Theisen & Bonitz gatherer tb sprint B307 VP, equipped with: – 7 stations collator / gatherer – stack height up to 30 cm – height control – double sheet control Ksdpfx Anjxnb Hfowodn – missing sheet control – including jogging table for solo-gathering / collating Theisen & Bonitz tb sprint 303 QSM stitch- fold- and trimming unit QSM quick set semi automatic size setting version Equipped with 2 Hohner 43/6 stitching heads and delivery belt Technical details Min. open format 6,5 x 15,5 cm Max. open format 35 x 50 cm Max. format booklet 25 x 35 cm Max. format booklet 6,5 x 6,5 Paper weight 18 – 1.000 gsm Max. stitching heads 6 Max. speed 3.300/h for solo gathering – 3.100/h inline with 303 (depending on paper and format)

Condition: used, functionality: fully functional, Horizon füzetkészítő gépsor Kjdpfx Asvgvyujnwsdn TC-8a torony TC-8b torony SPF-20 tűző és hajtóegység FC-20 trimmelő egység Papírméret: A5-B3 közötti

Condition: used, Year of construction: 2003, functionality: fully functional, Horizon TRC-A2a / TRC-A2b Air Suction Collator Model: TRC-16A2 Type: Air Suction Collator Configuration: TRC-A2a + TRC-A2b Number of Stations: 16 Bins Application: High-speed collation of large-format sheets Paper Specifications Paper Size: Max.: A2, Min.: A5 Paper Weight: 20 ~ 180 gsm Air suction feeding, 4 selectable feeding timings Paper Loading Capacity: Max. stack height 90 mm (9 cm) Collating Capacity 170 – 2,400 sets / 1,000 – 3,000 sets During independent operation of unit A or unit B, any two bins may be selected. During synchronized operation of units A and B, only bins 1 and 2 of unit A are available for selection. Power Requirements Power Supply: 200V 3 Phase 50/60 Hz Power Consumption: TRC-16A2: 7.0 kW (50 Hz), 7.4 kW (60 Hz) Motors TRC-16A2: 3.7 kw × 2, 0.4 kw × 2, 0.15 kw × 1 Dimensions & Weight Kdedpfszb Undex Anwon TRC-16A2: Weight: 1,463 kg

Condition: good (used), Year of construction: 2005, machine/vehicle number: SBLG 0005, Proto Trax VL 3 jaw SMW chuck 11KW Spindle motor Kjdpfx Anjzb Ipzjwjdn 104mm spindle bore Spindle speeds 30-1800RPM 350mm swing over cross slide X axis travel 280mm Z axis travel 1650mm 1750 mm between centres Coolant pump and tank

Condition: excellent (used), Year of construction: 2021, Traverses X Y Z: 660 x 450 x 500mm, Table size 720mm x 420mm, table load 500kgs, spindle speed 12,000rpm, spindle motor power 28Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 24m/min, Ksdpfxozbituo Anwsdn Spindle taper BT40, 12 station ATC

Condition: good (used), Year of construction: 2012, Traverses X Y Z: 785 x 470 x 530mm, Table size 900mm x 500mm, spindle speed 8000rpm, spindle motor power 11kW, Kdjdpfx Aeq R Tnzsnwon Prototrak, rapid feed XYZ axis 20m/min, Spindle taper BT40, 16 station ATC, swarf auger.

Condition: used, Year of construction: 2004, XYZ Proturn VL 355 ProtoTRAK CNC Gap Bed Centre Lathe ProtoTRAK SLX Control (2004) Max’ Distance Between Centres 1000mm Max’ Swing over Cross-slide 225mm Max Swing over Bed 360mm Spindle Bore 52mm Spindle Speeds 50 – 4000 rev/min Spindle Motor 5.75Kw Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2004 Supplied with: Kjdpozav N Tsfx Anwjdn 3 Jaw Chuck Interlocking Chuck & Main Guards 3 Toolholders TRAKing Constant Surface Speed Coolant Worklight Auto Lubrication For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79196 Machine Serial Number: SL091 Cost: £13,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 1630 ProtoTRAK CNC Gap Bed Centre Lathe Ex Research machine – Superb Condition ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 760mm Max’ Swing over Cross-slide 218mm Kodpszav D Djfx Anwodn Max Swing over Bed 400mm Spindle Bore 52mm Spindle Speeds 150 – 2500 rev/min Spindle Motor 5.75Kw Spindle Camlock D1-6 Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 60mm Tailstock Travel 127mm Manufactured | 2011 Weight 1560Kgs Supplied with: Two-axis CNC, Two-axis DRO. TRAKing, Constant surface speed. Electronic hand-wheels for X & Z Axes. Joystick for feed & rapids. Interlocked chuck guard and main guard. Quick change toolpost with holders. 3 Jaw chuck 5C Collet Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78211 Machine Serial Number: 16P99080-063 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2020, The XYZ Machine Tools XYZ CT65 LTY CNC turning centre in excellent condition with 12-station VDI 30 live tooling turret, Y-axis capability, hydraulic tailstock, chip conveyor, through-tool coolant, and automatic lubrication system. Designed for high-precision turning and mill-turn applications with bar capacity up to 65 mm. Machine Specification: ----- CONTROL Seiemns 828D with Shopmill Conversational and G-code programming capability Electronic handwheel for setup and jogging Fully interlocked safety guarding ----- CAPACITY Chuck size (main spindle): 200 mm Maximum swing: 400 mm Maximum machining diameter: 220 mm Maximum turning length: 490 mm Maximum bar capacity: 65 mm ----- TRAVEL Travel (X axis): 220 mm Travel (Y axis): ±35 mm Travel (Z axis): 500 mm Rapid traverse rate: 20 m/min Cutting feed rate: 0.01–10 m/min ----- MAIN SPINDLE Spindle nose: A2-6 Maximum spindle speed: 4,500 rpm Spindle bore: 76 mm ----- Ksdpjy S A D Nsfx Anwsdn TURRET Turret type: 12-station VDI 30 power turret Number of tools: 12 Turning tool size: 20 x 20 mm Maximum boring bar diameter: 32 mm Live tooling maximum speed: 4,500 rpm ----- TAILSTOCK Tailstock taper: MT4 Quill diameter and travel: 60 mm x 90 mm Hydraulic tailstock Programmable hydraulic tailstock (optional) ----- COOLANT & LUBRICATION Through-tool coolant system Flood coolant system Automatic lubrication system Coolant tank capacity: 80 litres Oil skimmer (optional) Oil mist device (optional) Coolant gun (optional) ----- ACCESSORIES Chip conveyor and chip bin Parts catcher system Renishaw automatic tool setting arm Air gun Transformer Leveling bolts and blocks Tool kit ----- MACHINE SIZE Machine dimensions (L x W x H): 3240 mm x 1788 mm x 1838 mm Door opening width: 668 mm Machine weight: 4,400 kg Control: Siemens 828D Spec: Spindle bore 65 mm | Max Swing 400 mm | Travel X 220 Z 500 Y +-35 mm Accessories: Chip conveyor and chip bin, Parts catcher system, Renishaw automatic tool setting arm, Air gun

Condition: excellent (used), XYZ SLX 555 x 3M CNC Lathe (2016) Stock Number 2851 Protrak SLX CNC Swing over bed 560mm Swing in gap 935mm Swing over cross slides 350mm Distance between centres 3000mm Spindle bore 104mm Additional Features Protrack SLX Control Drilling Attachment Ksdox Hp I Rspfx Anwsdn 4 Way Toolpost 3 Jaw Chuck 3 Point Steady