Used Tecno for sale (115)

Condition: ready for operation (used), A manual clipping machine Tecno Brianza Brevetti Clippatrice H2 is available. Products: sausage products, casing types: natural casings/artificial casings/synthetic casings, clipping capacity: approx. 600pieces/h, machine dimensions X/Y/Z: approx. 1250mm/1000mm/1750mm, weight: approx. 100kg. On-site inspection is possible. Hjdpfxsyf I Ifo Afnjfc

Year of construction: 2016, condition: ready for operation (used), Suitable for stainless steel wire: 1.4301, 1.4310, 1.4401, wire diameter: 0.25-0.5mm with a strength up to 2400 N/mm², working speed: 75-80m/min, temperature range: 400-650°C, suitable for four wires at the same time with one temperature gauge (movable), shielding gas: forming gas grade 95/5 95%N2/5%H2, nitrogen gas, cooling: water-cooled tubes. Hfjdpfx Asn R Nhqefnjc

Year of construction: 2014, operating hours: 36,000 h, condition: used, functionality: fully functional, REFRIGERATION UNITS IN COLD ROOM "PLUS SISTEMA" TECNO REFRIGERATION S.R.L. – not operational 1st unit - Serial No.: 1. TR140227 2nd unit - Serial No.: 1. TR140227 + 4 pcs evaporators. All equipment was disassembled by a qualified technician. Used for 5 years, after which a substantially larger warehouse was built with EU funding. Hsdjyf Hbqopfx Afnsfc

Year of construction: 2014, operating hours: 36,000 h, condition: used, functionality: fully functional, TECNO REFRIGERATION S.R.L. – in operation 1st unit – Serial No.: 1. TR140225 2nd unit – Serial No.: 1. TR140226 + evaporators Hfsdpfx Afeyf E Uconec Complete system for a cold room at -18°C for sale. It covered a chamber of approximately 120 m3. All equipment was professionally disconnected by a qualified technician, who is available. Full maintenance documentation included.

Condition: used, functionality: fully functional, Year of construction: 2015, Palletizer and pallet wrapper Capacity 100 kg / h Hedjtw Szaspfx Afnofc Used, no warranty This machine is located in Tata, Hungary. What is Pellet? Pellets are a natural biofuel made from made from agricultural and forestry wastes, such as dried sawdust, compressed into small cylinders with a diameter of a few millimetres. It possible to obtain a compact product with no additives and chemicals. Benefits of pellets? Among the most important advantages: environmental sustainability (reduction of deforestation and GHG emissions); cheap to produce and affordable to buy. And, due to the pressing process, the calorific value of pellets is approximately double that of wood for the same volume.

Condition: used, Year of construction: 2021, total length: 3,050 mm, load capacity: 790 kg, - Standardbereifung 23x8.50-12”grass/TR - Kraftübertragung Hydrostatischer Fahrantrieb - Schubkraft 700 kp - Fahrgeschwindigkeit 12 km/h - Hydrauliköltank, Füllmenge 26 l - Hydraulikölspezifikation ISO VG 46 - Zusatzhydraulik 34 l/min 185 bar - Wenderadius innen/außen 880 / 1970 mm - Hand-Arm-Vibration, Total < 2,5 m/s² Hjdpfx Afoxg Tgbonofc - Ganzkörpervibration, max. < 0,5 m/s²

Condition: excellent (used), Tecno Azzurra CS3A painting wall – after technical review – heater – year of manufacture 2007 – CE marking TECHNICAL PARAMETERS: width 3200mm Hsdpfxjmmb Eus Afnefc height 2350mm depth 1500mm fan motor power 2.2 kW heater motor power 7.5 kW power supply 380V capacity 11000 m3/h

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: M38I/8834, Offer Number: M38I/8834 Machinetype: pre-drawing machine Make: TECNO IMPIANTI Hedpswi Thgefx Afnjfc Type: SKP26 Constr. year: 2003 diameter range: 26 mm drawing speed: 10 m/min diameter range - mild steel: 26 mm diameter range - high tensile: 24 mm capstan diameter: 1300 mm Location: Germany

Condition: used, Hydraulic horizontal clamp Hfedpfoxtqg Eex Afnec

Year of construction: 2006, condition: good (used), Manufacturer: TECNO VIBRAZIONI - year of manufacture: 2006 - type: 28482 - overall dimensions: 2100x900x2900mm - strap width: 200mm - receiving size: 700x700mm - issue size: 200x130mm - transport speed: 6.0 m/min - electrical data: 400V; 0.18W; 0.7A Hfjdpfx Aepl Ttcsfnsc

Condition: ready for operation (used), functionality: fully functional, The Tecno Fluss VM 5000, manufactured in 2003 and identified by serial number 913, is an ideal solution for automating the dispensing of liquid or semi-solid products. This versatile model facilitates the precise dosing of various creams, sauces, and pastes. Furthermore, its ergonomic design reduces manual intervention, thereby increasing production rates. Furthermore, the intuitive operation of the Tecno Fluss VM 5000 allows operators to easily adjust parameters, ensuring a consistent flow. Each portion remains uniform, even at high production rates. Furthermore, the use of stainless steel components enhances its robustness and simplifies maintenance. As a result, this machine helps reduce the risk of contamination while extending its lifespan. Furthermore, the robustness of this dispenser meets the rigorous standards of the food industry. In addition, its compact design facilitates its integration, whether in a confined space or within a complete production line. In short, the Tecno Fluss VM 5000 represents a strategic investment to improve dosing accuracy, increase productivity, and reduce operational costs. This ensures consistent quality and significant time savings in your manufacturing processes. Technical specifications: Hedjwdv Ryopfx Afnsfc Adjustable production speed to accommodate high throughput Stainless steel construction to maintain optimal hygiene Intuitive control for simplified use Dosing system suitable for liquid and semi-solid products Estimated power: approximately 3 kW depending on configuration OWYSnISl

Condition: used, functionality: fully functional, mileage: 27,346 km, power: 140 kW (190.35 HP), first registration: 03/2008, fuel type: diesel, empty load weight: 4,540 kg, overall weight: 7,500 kg, axle configuration: 4x2, fuel: diesel, driver cabin: day cab, gearing type: automatic, suspension: steel, loading space volume: 8 m³, Year of construction: 2008, operating hours: 2,187 h, Equipment: ABS, Garbage truck: + Isuzu + NOR Smoother Q75.Y07 + First registration: 27.03.2008 + 27,346 km; 2,187 operating hours + Diesel engine, 5,193 cc, 190 hp + Automatic transmission + Twin tyres + Unladen weight: 4,540 kg; gross permitted weight: 7,500 kg + 577 cm length + 3-seater + Radio/CD + Electric windows Body: + TECNO + Type: Azimut 8 Hfsdpfx Aowu Etfsfnoc + 8 m³ container + Rear tipper with hydraulic support + Bin lifter + Compactor + Reversing camera + Warning beacons Vehicle from first owner Receive all our newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and omissions excepted, subject to prior sale!

Condition: used, functionality: fully functional, mileage: 195,000 km, power: 92 kW (125.09 HP), first registration: 06/2015, fuel type: diesel, empty load weight: 2,760 kg, overall weight: 3,500 kg, axle configuration: 4x2, fuel: diesel, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, loading space volume: 6 m³, Year of construction: 2013, operating hours: 421 h, Equipment: ABS, immobilizer system, Garbage truck: - Iveco - 35C13 - First registered: June 17, 2013 - Approx. 195,000 km (not readable) - 421 working hours - 6-speed manual transmission - 4-cylinder Iveco diesel, 2287 cc; 126 hp, Euro 5 - Unladen weight: 2,760 kg; Gross vehicle weight: 3,500 kg Hfjdpfx Aov Uyiiefnec - 568 cm long - Yellow light - 3-seater - Electric rear axle - Electric adjustable heated mirrors - Rear view camera - Air suspension rear axle - Twin tires - Timing belt and water pump recently replaced Waste body: - TECNO - URBIS 6 - 6 m³ divided steel container - Tipper with hydraulic support - Bin lifter - Side loading flaps left/right First-hand vehicle Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: used, Year of construction: 2008, machine/vehicle number: 320/08/8, Tecno Azzurra paint booth with overpressure water curtain Internal dimensions Hfodpfx Aewfriuefnjc - Length 10000mm - Width 5000mm + 300mm drip grid - Height 2700mm Lrjc R Dewfrdxer T Ncok Water wall dimensions 4000x2500mm placed on the side wall 4 x sliding doors measuring 2000x2300 Air blowing 24,000m3/h Air extraction 15,000m3/h Dismantling on the buyer's side Net price

Condition: used, Used concentration / evaporation system previously used to separate water from surfactant. Capacity for this process was approximately 8-12 m3/day of water/surfactant mix. System was built by Ecotecno during 2011/2012 and was shut down in April 2022. System described as a single effect vacuum evaporator with condenser. Includes flash reservoir in vacuum, distillate tank, vacuum tank, plate heat exchanger. Full documentation for equipment available. Hedpeyhc Ifofx Afnefc

Condition: used, Year of construction: 2017, Overview  The Tecnoimpianti MINI STAB 300 SINGLE is a compact system for the acid stabilization of must and wine using the ion exchange process. It was built in 2017 by the Italian manufacturer Tecnoimpianti Water Treatment S.r.l. and was rarely used by the original owner and is now being sold due to a change of ownership. The machine is therefore in very good condition and available immediately. It is ideal for wineries, breweries or the production of carbonated beverages. Technical details Capacity: approx. 300 l/h Area of application: Acidification / stabilization of must and wine Process: Ion exchange with strongly acidic cation exchange resin Compressed air requirement: min. 6 bar Power supply: 400 V / 3 Ph + N / 50-60 Hz Installed power: 3.2 kW Operation: Touchscreen HMI Protection class: IP65 Compressor tank: 400 L, 3 bar operating pressure Certification: EU-compliant / CE Special features Fully automated process control Precise pressure and temperature control Stainless steel construction (hygienic & durable) Plug-and-play system with touchscreen Built-in nitrogen feed Effectively reduces potassium bitartrate formation Hfjdpfxswm Rfke Afnoc

Condition: used, Year of construction: 2005, Top-bottom profiling group at input 5 Sanding Groups 1 horizontal finishing brush group Electronic speed variator for sanding Hjdpfx Afjyacz Nonsfc Ideal manufacturer of stairs, frames, various moldings, ... 380V Weight +/- 3.000kg Control cabinet Machine documents

Condition: excellent (used), Year of construction: 2004, Total off 12 units available Hfjdpfjxxkhyex Afnsc

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 700 h, CMS Tecnocut Easyline like new Hfsdpfx Aetq Eh Dsfnjc Cutting Area / Axis Movement X-Axis: 2.000 mm Y-Axis: 4.000 mm Z-Axis: 150 mm C-Axis: Optional B-Axis: Optional Options: - 5-Axis cutting head - additional cutting head - Sanddoser - Dredge for abrasive - Antikollisionsfeeler - CAD/CAM IGEMS

Condition: used, This listing is for a Life Technologies Ion Torrent OneTouch 2 with OneTouch ES The Life Technologies Ion OneTouch 2 with Ion OneTouch ES comprises two modules: the Ion OneTouch™ 2 Instrument and the Ion OneTouch™ ES (enrichment system). It simplifies the workflows by providing an automated solution for scalable and reproducible template preparation. It is used for DNA sequencing in healthcare, lab and life sciences. It streamlines the overall Ion semiconductor sequencing workflow, yielding significant time savings and increasing sequencing productivity. The system enables parallel template processing with sample sequencing on the Ion Proton™ or Ion PGM™ sequencers. This reduces the time from sample to sequence to a single day and enables processing of multiple samples per day. The combination of Ion semiconductor sequencing and the Ion OneTouch™ 2 System maximizes the speed of each experiment and minimizes the overall time to completion for each project. The modular design also allows for QC of Ion Sphere™ particles, to maximize experimental control and the success of each experiment. Features: Integrates multiple manual template preparation workflows into a single system Enables parallel processing of multiple samples per day through modular design Supports scalable template preparation for all Ion semiconductor sequencing chips Supports up to 400 bases on the Ion PGM™ System and up to 200 bases on the Ion Proton™ System Includes a full thermal cycling modality for amplification for quick optimization of thermal cycling parameters Employs a peristaltic pump fluidic system that eliminates the need for gas Fits easily on any benchtop with its small instrument footprint Specifications: Weight, OneTouch 2 23 lbs. (10.4 kg.) Weight, OneTouch ES 12 lbs. (5.4 kg.) Hedpfxjxzg Ube Afnsfc Dimensions, OneTouch 2 12" W x 16" D x 14" H (30 x 41 x 36 cm) Dimensions, OneTouch ES 9.5" W x 12.5" D x 11" H (24 x 32 x 28 cm) Operating Humidity 20%-80% (non-condensing) Operating Temperature 15°C-25°C Multiplex Capability Up to 384 barcoded libraries High Throughput Compatibility Automated Protocols, Multiplexing, High Throughput-Compatible Power 100-240 VAC, 50/60 Hz, 5.5 A max

Condition: used, This listing is for a Life Technologies Ion Torrent OneTouch 2 The Ion OneTouch 2 Instrument performs template amplification as part of the manual workflow for the Ion PGM, Ion Proton, Ion S5, and Ion S5 XL systems. It provides scalable template preparation for all Ion semiconductor chips. The instrument has a small footprint and fits easily on any bench top. For a fully automated workflow, please see the Ion Chef Instrument. The Ion OneTouch ES enrichment module is not included in this purchase. For both the Ion OneTouch 2 Instrument and ES module Efficiency and flexibility The Ion OneTouch 2 instrument integrates multiple manual template preparation steps into a single system. This enables parallel processing of multiple samples per day through modular design. It is flexible and supports scalable template preparation for all Ion semiconductor sequencing chips with up to 400 bases on the Ion PGM, up to 200 bases on the Ion Proton System, up to 400 bases on the Ion 520 and Ion 530 chips, and up to 200 bases on the Ion 540 chip. The need for gas is eliminated by the use of a peristaltic pump. Hjdpfxexzg T Dj Afnofc Contributing technologies At the heart of the Ion OneTouch 2 Instrument are three breakthrough technologies that enable automated delivery of the template Ion Sphere particles. The first is the reaction filter that creates millions of microreactors in which clonal amplification occurs. The second is the fully integrated thermal cycler and disposable path amplification plate that enables robust thermal cycling of the microreactors. The third is the integrated centrifuge, which recovers the template Ion Sphere particles. Altogether this allows the OneTouch2 instrument to deliver massively parallel clonal amplification and recovery, all in a small bench top footprint.

Condition: used, This listing is for a Life Technologies Ion Torrent OneTouch ES This unit does not come with the Ion Torrent OneTouch ES Hfodpoxzg T Rjfx Afnoc Enrichment component of the Ion OneTouch 2 template amplification & ample preparation system 110-240VAC 50/60Hz 0.5 Amp

Condition: ready for operation (used), Tecnoma-lijn voor de productie van installatiehaken voor industriële goten 1 - Afrolinrichting 2 ton maximale breedte: 30 mm binnen- en buitendiameter van de spoel: 508 / 1600 mm hydraulische uitzetting van de klauw: 460 640 mm 1 kW 2 - Voederbak 3 - Rolvormstation maximale dop: 2 mm 2,2 kW 4 - 3 ponsstations 5 - Buigen en knippen Klik hier om de Tecnoma-rolvormlijn voor industriële goten te bekijken. Hedjx Impnjpfx Afnefc

Condition: ready for operation (used), Complete rolvormlijn uitgerust met gereedschap voor de productie van een nieuw type industriële goot voor gegalvaniseerd staal/roestvrij staal Hsdpfxox Impuj Afnjfc 1 - Afrolinrichting 2 ton maximale breedte: 600 mm binnen- en buitendiameter van de spoel: 508 - 920 mm hydraulische uitzetting van de klauw: 460 640 mm 4 kW 2 - Rolvormlijn Type H 18 stations maximale breedte: 600 mm maximale dop: 0,8 mm asdiameter: 60 mm maximale hart-hart as afstand: 300 mm Siemens Simatic touchscreen bediening + ethernet aansluiting 7,5 kW 3 - Hydraulische schaar kracht: 5 ton Klik hier om de tweede Tecnoma-lijn te zien voor de productie van installatiehaken.

Condition: excellent (used), Year of construction: 2016, CMS Tecnocut Easyline Cutting Area / Axis Movement X-Axis: 2.000 mm Y-Axis: 4.000 mm Hfsdpod I D R Tofx Afnjc Z-Axis: 220 mm Options: - 3-Axis Cutting Head - Sanddoser - 22,5 kW High Pressure Pump Easypump