Used Luggage Tags for sale (837)

Condition: new, functionality: fully functional, machine/vehicle number: 12412802, empty load weight: 540 kg, maximum load weight: 760 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 3,150 mm, loading space width: 1,640 mm, loading space height: 2,370 mm, Year of construction: 2026, Loading dimensions approx. 1640 mm x 3150 mm x 2000 mm External dimensions approx. 2150 mm x 4450 mm x 2370 mm Gross vehicle weight: 1300 kg Payload: approx. 760 kg (payload varies depending on additional equipment) Manufacturer: Debon Features - Aluminium box body - Polyester roof and front (aerodynamic) Iedpfx Aaoq T R R Tsgsat - Pullman V2 low-floor chassis - Floor plate: aluminium floor (anti-slip) - Door/ramp combination (aluminium) - Shock absorbers installed including 100 km/h certification - Lockable side door - Interior lighting with switch - 6 lashing rings on loading floor - Vehicle documents included Additional equipment - Rear supports - Wheel chocks and holders Chassis - Pullman V2 | coil spring suspension and shock absorber | V-drawbar with ball coupling | automatic heavy-duty jockey wheel Electrics - 12 volt | 13-pin connector | marker lights | fog light If you wish to purchase this trailer or have further questions about trailers, please refer to our internal flatbed trailer number "12412802".

Condition: new, empty load weight: 320 kg, maximum load weight: 880 kg, overall weight: 1,200 kg, loading space length: 2,510 mm, loading space width: 1,260 mm, loading space height: 1,180 mm, tire size: 185/70R13, Low loader with cover from the manufacturer ANSSEMS model GTB1200 251x126 VT2. The standard equipment of the Anssems cover trailer with brake includes aluminum side walls, aluminum cover with gallery, overrun flap, internal locks, adjustable lashing eyes, profile channels for attaching accessories or load securing, support wheel and a V-drawbar. Iaedpfx Aajrvzm Degjt We also offer accessories for Anssems car trailers such as toolboxes, lashing straps, lashing eyes, 100 km/h and anti-theft devices.

Condition: used, empty load weight: 3,830 kg, overall weight: 12,000 kg, axle configuration: 2 axles, first registration: 11/2006, loading space length: 7,950 mm, loading space width: 2,460 mm, loading space height: 2,850 mm, loading space volume: 56 m³, suspension: air, tire size: 205/65 R17,5, wheelbase: 1,350 mm, color: white, Equipment: ABS, Drum brake Payload 8,170 kg Iaedpfx Asrp E Rzjagst unloaded to a gross train weight of 9,990 kg Lifting and lowering device BPW axles Errors excepted

Condition: new, empty load weight: 290 kg, maximum load weight: 910 kg, overall weight: 1,200 kg, loading space length: 2,510 mm, loading space width: 1,260 mm, loading space height: 830 mm, tire size: 185/70R13, Low loader with cover from the manufacturer ANSSEMS model GTB1200 251x126 VT1. Iedjq Su Rcopfx Aagoat The Anssems cover trailer with brake has aluminum side walls, aluminum cover with gallery, internal locks, adjustable lashing eyes, profile channels for attaching accessories or load securing, support wheel and a V-drawbar as standard equipment. We also offer accessories for Anssems car trailers such as tool box, lashing straps, lashing eyes, 100 km/h, and lock.

Condition: new, empty load weight: 390 kg, maximum load weight: 1,110 kg, overall weight: 1,500 kg, loading space length: 3,010 mm, loading space width: 1,260 mm, loading space height: 1,180 mm, tire size: 145/80R13, Low loader with cover from the manufacturer ANSSEMS model GTT1500 301x126 VT2. The standard equipment of the Anssems cover trailer with brake includes aluminum side walls, aluminum cover with gallery, overrun flap, internal locks, adjustable lashing eyes, profile channels for attaching accessories or load securing, support wheel and a V-drawbar. Ijdpoq Sviqsfx Aagjat We also offer accessories for Anssems car trailers such as toolboxes, lashing straps, lashing eyes, 100 km/h and anti-theft devices.

Condition: new, empty load weight: 240 kg, maximum load weight: 510 kg, overall weight: 750 kg, loading space length: 2,110 mm, loading space width: 1,260 mm, loading space height: 830 mm, tire size: 145/80R13, Low loader with cover from the manufacturer ANSSEMS model GTB750 211x126 VT1. Iajdpfx Aaoq Su Tuogjt As standard equipment, the Anssems lid trailer with brake has aluminum side walls, aluminum lid with gallery, internal locks, adjustable lashing eyes, profile channels for attaching accessories or load securing, support wheel and a V-drawbar. We also offer accessories for Anssems car trailers such as tool box, lashing straps, lashing eyes, 100 km/h, and lock.

Condition: new, empty load weight: 490 kg, maximum load weight: 810 kg, overall weight: 1,300 kg, loading space length: 3,100 mm, loading space width: 1,650 mm, loading space height: 1,950 mm, tire size: 185/70R13, Roadstar 400 tandem box trailer from Cheval Liberte / Debon. Attractive design, aerodynamic front, aluminum walls, aluminum floor and polyester roof are combined in this case. Iasdsrxu T Ijpfx Aagjt Hardly any other car trailer has such excellent handling as this one! The aluminum box trailer is equipped with the Pullman2 chassis, which was developed by Cheval Liberte itself. The low loading height of just 35 cm and the independent wheel suspension with trailing arm, coil spring and shock absorber to automotive standards ensure optimum driving characteristics. The flat drive-on angle is ideal for loading motorcycles and quad bikes. The drive-on ramp of the poly box trailer, which can also be opened as a door for easy loading of pallets and other goods, is outstanding. The extensive standard equipment of the car trailer includes a poly roof and poly front in one piece, aluminum walls, aluminum floor, side door, folding door system, 100km/h, interior light, automatic support wheel, lashing eyes, stable frame and a V-drawbar. Useful box trailer accessories such as motorcycle rocker, stand rail, motorcycle straps, lashing straps, rear supports and lashing eyes are also available. The body is splash-proof.

Condition: new, empty load weight: 380 kg, maximum load weight: 920 kg, overall weight: 1,300 kg, loading space length: 2,550 mm, loading space width: 1,280 mm, loading space height: 1,530 mm, tire size: 165R13, Plywood box body WEB40 from trailer manufacturer Unsinn. The car trailer with plywood body made in Germany has white walls and a transparent roof. The box trailer is equipped with a lockable single-leaf door with espagnolette lock, support wheel, light roof, tubular drawbar and plastic-coated white walls. Iaodpfx Aajq Nzr Deget Accessories for this car trailer include ramps, lashing rails, rear supports, lashing eyes, tool box, anti-theft device, lashing straps and much more.

Condition: new, empty load weight: 390 kg, maximum load weight: 910 kg, overall weight: 1,300 kg, loading space length: 2,300 mm, loading space width: 1,500 mm, loading space height: 300 mm, Product information "UNSINN WEB-HK2315-13-10 1300kg 230x150x30cm rear tipper with PUMPless" Rear tipper from trailer manufacturer Unsinn. Made in Germany! The WEBHK2315-13-10 single-axle high-loader is a rear tipper. Easy to load thanks to its foldable and removable aluminum side walls. The load can then be tipped manually using the hydraulic system. A welded base frame makes the tipping trailer very stable. Isdpfx Aeq Rvcqoagoat This car trailer is equipped with foldable and removable side walls, a solid steel floor, PUMPless hydraulics for cordless screwdrivers, a support wheel, lashing eyes, a welded, hot-dip galvanized steel frame, and a sturdy V-drawbar. Accessories such as a leaf grid attachment, side wall attachment, tarpaulin and frame, tarpaulin, load securing net and supports are also available for an additional charge.

Condition: new, empty load weight: 150 kg, maximum load weight: 350 kg, overall weight: 500 kg, loading space length: 1,810 mm, loading space width: 1,010 mm, loading space height: 480 mm, tire size: 145/80R13, Unbraked low loader with cover from trailer manufacturer ANSSEMS model GT500 181x101 HT. The standard equipment of the Anssems cover trailer without brakes includes aluminum drop sides, aluminum cover with railing, internal locks, external lashing eyes, profile channels for attaching accessories or load securing, support wheel and a tubular drawbar. Iasdjq Svi Uepfx Aagot We also offer inexpensive accessories for Anssems car trailers such as net hooks, rear supports, tool box, lashing straps, lashing eyes and anti-theft devices.

Condition: excellent (used), loading space length: 318 mm, loading space width: 67 mm, loading space height: 57 mm, Supply air system Rox Lufttechnik HYD 0100 HKB Used goods, good condition, see pictures length 318 cm Ijdstwz Atjpfx Aagoat width 67 cm height 57 cm 800 m³/h Volume flow 3 kW Heating capacity 4.4 kW Cooling capacity Cooling and heating coil included 8 units in stock. Negotiated price: € 800,-- net per unit ex stock Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our GTC, all prices excl. VAT ex stock)

Condition: used, Year of construction: 1990, Folding tap pointer . tube diameter 5 - 20 mm tag length 50 - 100 mm total wight 1,4 t +++++ Ijdeit Ewfepfx Aagoat Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, ABLEPick Picking tag AT-505 Rev 1.3 RA2336 Iodevygx Iopfx Aagoat S/N A17610000-2302 102AT505000004G V1.1 Product dimensions: 147 x 46 x approx. 20 mm Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg

Year of construction: 2022, condition: like new (used), functionality: fully functional, machine/vehicle number: TAG ARTENA-03722-1/11, The TAG Artena 16-channel Weighing and Filling Machine is a fully automated, multi-product weigher designed for accurately portioning delicate small- and medium-sized loose fruit and vegetable products into trays. This machine is integrated at the upstream end of the production line, positioned before the packing and labelling machines. Products are loaded in bulk onto the weighing machine's conveyor belt, then directed onto the feed conveyors via a dynamic hopper and placed into trays. Trays are destacked and sorted onto the indexed conveyor. The filling process occurs in four steps, during which the trays are weighed in-line using patented technology. The machine is controlled via a touch-screen control panel, providing a comprehensive overview of its functions. Key product and machine performance specifications: • Weighing and filling system for delicate fruits • Feeding belts made from special soft material to prevent bruising of stone fruit • 8+8 multi-product weighing units • Enhanced product shelf-life due to reduced drop heights • Linear combination and/or counting operation logic • Three-way automatic dual tray/basket destacker • Multi-format, double-lane automatic tray/basket conveyor • Tray weight: from 300 grams up to 1,500 grams • Tray size: from 65x65xh25 mm to 200x200xh110 mm • Tray shapes: square, rectangular or round • Multi-material trays: plastic, plastic-free, cardboard, and other materials • Easy touch-screen control • User-friendly interface, ready for in-line connections • Automatic format changeover • Production statistics • Electrical connections for downstream machine synchronization • Button-operated clam-shell closing device • Two-to-one channel converger conveyor Main construction features: • Stainless steel frame • Sorting belt with support surface for crate tipping • 2 product feed elevator belts • 8+8 multi-product weighing units (patented system) Iaedpfx Asykam Deagjt • Clam-shell closing device • Automatic multi-format tray destacker • Food-grade PU motorized conveyor belts • Tray diverters • Synchronized step-by-step belt movement using sensors and microcontrollers • Belt function logic managed by TAG dedicated microcontroller and software • Electrical connections for synchronization with downstream machines (flowpack or other) • Power supply: 220V 50Hz, 2.5kW consumption • Compressed air circuit, minimum pressure 7 bar • Hardwired internet connection for remote support All line command and control functions are managed via a tablet supplied with the machine, serving as the HMI and onboard operator panel. The intuitive 3D graphic interface and 10'' touch-screen make the operation highly user-friendly.

Condition: refurbished (used), Year of construction: 2015, operating hours: 6,727 h, functionality: fully functional, overall weight: 4,824 kg, fuel type: diesel, tank capacity: 1,000 l, power: 160 kW (217.54 HP), output current: 288 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power (apparent): 200 kVA, rotational speed (max.): 1,500 rpm, motor manufacturer: Stamford, For sale is a Powerplant AS200 IS2 diesel genset with 200 kVA prime power, manufactured in 2015, powered by an Iveco CURSOR87TE1F.S550 engine with Stamford alternator. Total operating hours: 6727h. A key feature of this unit is the HJS Emission Technology Stage IIIA to Stage V emission upgrade carried out by HJS Emission Technology UK in Swindon. The genset was equipped with a modern exhaust aftertreatment system designed to significantly reduce emissions and allow operation in emission-sensitive environments and projects. The genset is already registered with CVRAS/EST. In accordance with CVRAS/EST requirements, a telematics unit has been installed to monitor NOx performance. The first year of telematics service is included. After 12 months, an annual service fee applies. The telematics connection allows remote monitoring via the HJS online portal, including AdBlue refill status, system condition and NOx performance data, helping operators maintain compliance and monitor the system efficiently. The retrofit system combines proven exhaust aftertreatment technologies including: Diesel Oxidation Catalyst (DOC) Diesel Particulate Filter (DPF) SCR system with AdBlue injection The DPF reduces particulate emissions, while the SCR system lowers NOx emissions. The installed 80-litre AdBlue tank provides approximately 30 operating hours at full load without refilling, depending on load profile and operating conditions. This retrofit solution enables existing generators to meet modern Stage V emission requirements without the immediate need to purchase a new machine. Installed HJS components: 10.5” DOC 10.5” DPF 13.0” SCR 80-litre AdBlue tank Control unit Telematic unit AdBlue pump Fuse box Display The original silencer was removed during conversion. Operating time after the upgrade is only approx. 10 hours. Iajdpfx Aajy R D Hcegst This genset is ideal for construction, industrial, rental and infrastructure projects where low emissions and NOx monitoring are required. It is also suitable for use within London Low Emission Zones and other projects with strict emission regulations. Technical Specifications: Generator make: Powerplant Model: AS200 IS2 Prime power: 200 kVA Engine: Iveco CURSOR87TE1F.S550 Engine power: 160 kW RPM: 1500 Alternator: Stamford UCI274H1 Control panel: Deep Sea Electronics DSE7410 Housing: Canopied Year: 2015 Dry weight: 3762 kg Wet weight: 4824 kg Voltage AC: 400V / 230V Voltage DC: 24V Frequency: 50 Hz Serial number: 4184/01 Note: Sold as a used industrial machine. Inspection and technical verification prior to purchase are recommended. All information is provided to the best of our knowledge based on available technical data. If you have any questions or require further information, please contact us.

Condition: used, This listing is for the Agilent Stratagene MX3005 Real-Time PCR System. The unit is in full working condition and ready for immediate use Designed for accurate quantitative PCR, it features precise thermal control, multi-channel fluorescence detection, and user-friendly software integration, ideal for gene expression and molecular diagnostics workflows. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) Isdpfx Aey Hrbteageat • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements.

Year of construction: 2016, condition: ready for operation (used), number of axes: 3, This 3-axis OGP SmartScope Vantage 450 was manufactured in 2016. It features a travel range of 450 x 450 x 250 mm and is equipped with a Renishaw SP25M Scanning Probe Kit and Telestar Plus TTL-Laser-Sensor. The machine includes a 24" LCD monitor and various accessories for enhanced functionality. If you are looking to get high-quality optical measurement capabilities, consider the OGP SmartScope Vantage 450 machine we have for sale. Contact us for further details. • Travel (X/Y/Z): 450 x 450 x 250 mm • Software: MeasureMind 3D Multisensor; ZONE3 (CAD-based) • Probing system: Renishaw SP25M scanning probe kit • Sensor: Telestar Plus TTL laser sensor Iasdoy Ry Iispfx Aagst • Power: 230 VAC, 50/60 Hz, 4.0 A • Operating system: Windows 7 (eligible for Windows 10 upgrade) Additional equipment • 24" LCD monitors (x4) • Scanning probe adapter • Sonic SD electronics • Kinematics for probe changer rack • Laser calibration artifact • Offline PC (ZONE3) • Standard desk (1000 x 800 x 750 mm) • Dust cover

Condition: used, Three-phase power meter: current, voltage, and power measurement; long-term monitoring; energy measurement 3-phase power measurement device, ammeter, voltmeter, digital measuring instrument, active power, apparent power, reactive power BEHA Type UNITEST Power Analyzer 93555 For measuring voltage, current, active power, apparent power, reactive power, power factor, phase angle, frequency measurement, phase sequence detection, energy measurement, and harmonics measurement. Display: LC multifunction display with backlight Refresh rate: approx. 2 sec. Data logger: 512 KB non-volatile memory (max. 21,000 readings, max. 10 data sets) Sampling rate: 5 s, 30 s, 1 min, 2 min. (adjustable) Data transmission: via optically isolated RS232 interface Manual memory: max. 99 measurements Overvoltage category: CAT III 600 V Power supply: 8 x 1.5V AA batteries or mains adapter 230VAC / 12VDC (batteries not included) Voltage measurement: 3 input channels with common reference point "N" Measuring range: 0 - 600 V RMS Display range: 0 - 999.9 V RMS Resolution: 0.1 V Mains frequency: 50 Hz Iaedpfsx A Imzox Aaget Current measurement: Measuring range Input I1, I2, I3: 3 - 999.9 A Input I4: 3 - 250 A Display range: 0 - 999.9 A Resolution: 0.1 A Clamp opening: 40 mm Active power: Selectable display of the active power of an individual input or the total value Display range: 0 - 999.9 kW Resolution: 0.1 kW Apparent power: Calculated from the RMS values of voltage and current Display range: 0 - 999.9 kVA Resolution: 0.1 kVA Frequency measurement: Range: 45...80 Hz Resolution: 0.1 Hz Accessories: - Carrying case - Operating manual - 4 measuring clamps - 4 test leads with crocodile clips - RS232 adapter cable - Mains adapter 230VAC / 12VDC Overall dimensions (W x H x D): 370 x 270 x 170 mm Total weight: 3 kg Device tested, fully functional. Note: The housing of 2 measuring clamps is damaged and the battery compartment shows some oxidation (see photos).

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module Iodpfxoyug R Ro Aagjat

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Iodpfxoyug Hxs Aagjat Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece length (max.): 4,000 mm, workpiece width (max.): 655 mm, workpiece height (max.): 640 mm, workpiece weight (max.): 1,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 16 bar, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale here is a Mazak VTC 200C II including a Kitagawa rotary table (4th axis). The machine is in very good condition and immediately ready for operation. Inspection under power is possible at any time. Transport and installation can be offered upon request. Technical Data: Control: MAZATROL 640M Machine width: 2819 mm Machine height: 2870 mm Machine weight: 9100 kg Table length: 2000 mm Table width: 510 mm X-axis travel: 1660 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Equipment: - Number of tools: 30 - Spindle power: 15 kW - Spindle speed: 12,000 RPM - Through-spindle coolant 16 bar - External coolant - Renishaw measuring probe OMP60 - Kitagawa 4th axis - Automatic warm-up function Ijdpfxoy Ndzde Aageat The main spindle was replaced or renewed in 2025.

Condition: used, Year of construction: 1970, machine/vehicle number: CP511510, Right-hand drive First registration: 01 January 1970 40,522 miles Iedpfxey R Sm Dj Aagsat with complete documentation in 2 folders MOT: new Power: 103 kW

Condition: used, Steel Structure Platform Scaffold Stage Versatile in use Dimensions: approx. 7.5 m + overhang right 0.8 m / left approx. 2.1 m Width: approx. 3.7 m Height of columns: approx. 2 m Height to top edge of double-T beam: approx. 2.5 m Iasdpsy Sac Ajfx Aagst Covered with aluminium chequer plate Safety fence available on request!

Condition: used, 2-stage electric motor with gearbox DEMAG Type FG 08B-B3-23-H1-F1 Output speed fast: 915 rpm Output speed slow: 174 rpm 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 125 B Motor No.: 3926599 Iaodpsy N D E Asfx Aagst Speed: 915 rpm Motor power: 4.7 kW Power supply: 400 Volt, 50 Hz - Clutch disconnects via armature thrust movement during direct drive 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 80 A Motor No.: 3926599 Speed: 1360 rpm Motor power: 0.83 kW Power supply: 400 Volt, 50 Hz - Brake disengages via armature thrust movement during operation - When stationary, the brake operates through the reduction gearbox on the motor - Output speed via gearbox: 174 rpm Reduction gearbox DEMAG Type FG 08B-B3-23-H1-F1 Gearbox No.: 13926599 Input speed: 1360 rpm Output speed: 174 rpm Gear ratio: i = 7.8 Output shaft via motor armature: Ø 32 mm Shaft stub length: 80 mm Centering diameter at motor: Ø 125 mm Bolt circle diameter at motor: Ø 150 mm / 4xM12 internal thread Dimensions (LxWxH): 1100 x 430 x 300 mm Weight: approx. 160 kg Good condition

Condition: ready for operation (used), Year of construction: 1981, machine/vehicle number: 302118, functionality: fully functional, pressing force: 100 t, wire diameter (max.): 14 mm, section length (max.): 125 mm, production capacity: 7,200 unit/h, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Max. total pressing force: 1,000 kN Iedpjy D Nldofx Aagjat Productivity/capacity: 120 pcs/min Wire diameter: max. 14 mm Cut length: 125 mm Number of stages: 4 Number of dies: 4 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,000 x 3,000 x 2,200 mm Machine weight: 12,000 kg External reference: 35