Hamburger forming machine
Yhuto
Bed size 880 x 630 mm
Outer edge seal 950 x 700
Inside edge seal 880 x 630
Double heater
6 heat settings for the top heater
1 setting for the bottom heater
Vacuum pump included
Vacuum tanks included
Top air ramp for blowing domes
Ojdgl
ROLLFORMING MACHINE
PRODUCING SQUARE PROFILES
WITH 5 TONES OF TOOLS
MADE IN ITALY
Bhxi3quk0n
Set up for Leading Edge Profiles. 1 pair 84" Reversible Grippers. Table 60" x 15"
Bsgyryjlvk
Our demonstration carton sealing machine type VOGEL MH-FJ-1AW has a side drive belt system. Including pre- and post-table.
Cardboard formats:
Length 150 - ∞ mm
width 100 - 480 mm
height: 120 - 480 mm
Technical data:
length 1,090 mm
width 890 mm
Weight 180 kg
Operating voltage 220 V
CE Marking
Accessories:
Btw3anawk3
For our VOGEL carton sealer program we offer rollers, pre- and post-tables, roller conveyors.
Janssen pastry forming roller for pastry forming machines
Dimensions:
59cm Long
Shk2j2zl
Diameter ø12,5cm
Professional, stable and compact packaging machine from a renowned European manufacturer for tape widths up to 50 mm. Maximum carton dimensions approx.: width 500 mm x height 500 mm; length unlimited.
Bpnbr0uwh2
-Locking on both sides top and bottom.
-Transport speed approx. 20 m / min.
-Different carton formats are each continuously adjusted in height and width via a quick adjustment system (without crank).
Height-adjustable and adjustable and lockable via foot rollers.
The machine can be opera...
/ new (2020) / CE-conform / suitable for: two lane-production (one product) / materials: paper board 200 - 600 gsm / corrugated board paper with thickness not exceed 1.5 mm / max. production speed: 400 pcs/min. (according to manufacturer) / configuration: manual adjustment - Siemens PLC - glue bottles - counting system - 1 mold / option: glue spray
Bmrpw92h38
Hydraulic pipe end forming machine make BLM Curvatubi type AST 102/5 P
Machine # 411705017
Technical data:
min. pipe diameter 20 mm
max. pipe diameter 102 mm
pressure capacity 22 t
max. stroke 200 mm
max. expansion length 150 mm
feed speed at 100 mm stroke 1,9 / 2,6 sec.
drive power 20 PS
weight approx. 2300 kg
M9djpd
dimensions approx. 2200 x 2100 x 1600 mm
with
- 5 workstations
- foot switch
- emergency stop
- 1 lot forming tools
used, in good condition
With Sectionalised Tooling. Table size 96" x 12".. Adjustable jaws 5 each side in 410mm sections. Serial No. 84267
Bsgyq2v0zh
Our case sealer type VOGEL MH-FJ-1A is a demonstration machine. It has a side drive belt system and an additional drive belt in the upper part of the machine. The advantage lies in the stability - high cartons cannot tip over to the side.
Suwe2k
Cardboard formats:
Length 150 - ∞ mm
width 120 - 480 mm
height: 120 - 480 mm
Technical data:
length 1,090 mm
width 1.050 mm
Weight 200 kg
Operating voltage 220 V
CE Marking
Accessories:
For our VOGEL carton sealer program we offer rollers, pre- and post...
Janssen pastry forming roller for pastry forming machines
Btqa9p28t8
Dimensions:
59cm Long
Diameter ø12,5cm
Professional packaging machine of a renowned German manufacturer for adhesive tape width up to 50 mm. Maximum carton dimensions approximately: width 500 mm x height 500 mm; length unlimited.
-Double sided closure on top and bottom.
-Transport speed approx. 20 m / min
-Different carton formats are infinitely variable in height via a quick adjustment system (without crank).
-Working height of the machine is adjustable.
-Optional: scissor roller conveyor.
B9c8c7pg
The machine can be demonstrated un...
equipped with:
1 pce. Anti-noise-box
1 pce. Eccentricpress 90 kN
Ysv28k
3 pce. Standard slide units
Working range:
wire diameter range: 0,5 - 4,0 mm
strip metal width: max. 60 mm
feeding length: max. 270 mm
output: max. 350/min.
Carton tape closing machine fully automatic
with automatic upper lid closing device
Manufacturer: Normpack
9oxvfvyj0
Type: NCF 045
Year of manufacture: 1999
glueing heads for tapes with maximum width up to 76 mm
in rolls with maximum diameter up to 335 mm
External dimensions for cartons:
length: min. 150 to 600 mm
width: min. 100 to 500 mm
height: min. 100 to 500 mm
...
workpiece diameter:500 mm (min. max)
centre distance:800 mm
max. workpiece length:500 mm
spindle turning speed range:800 1/min
tailstock quill stroke:600 mm
total power requirement:161 kVA kW
ejector:300 mm
draw-off device:35 mm
Jic3taj
Leifeld is the world leader in the development and manufacturing of machine tools for chipless metal forming.
Leifeld's high quality and innovative metal spinning machines produce the best results possible for serial production needs.
Metal spinning provides ma...
Our demonstration carton sealing machine type VOGEL MH-FJ-2 is equipped with a side drive belt system. The machine automatically adapts to the respective carton size within the specified range.
Cardboard formats:
Length 150 - ∞ mm
width 140 - 480 mm
height: 120 - 480 mm
Technical data:
Length 1,150 mm
width 1.005 mm
Weight 250 kg
Operating voltage 220 V
Btuimotcwj
Air 5 kg/cm2
CE Marking
IMPORTANT:
To operate the machine an air pressure supply is required, which is not included in the scope of...
Offered here is an unused Nakashimada molding press. Accordingly, the machine is in top condition. Gladly the plant can be visited at any time on site.
1. SCOPE OF OFFER
- NAKASHIMADA NSX 80 HF forming press (year of construction: 2015)
- Heavy + Kopka SK 400 process monitoring system
- reel
- wire straightener
- cooling system
- Complete operating documentation (operating instructions, electrical diagrams, list of accessories, control instructions)
2. TECHNICAL DATA
Machine type: NSX80HF
Cuttin...
Professional, stable and compact packaging machine from a renowned European manufacturer for tape widths up to 50 mm. Maximum carton dimensions approx.: width 500 mm x height 500 mm; length unlimited.
-Locking on both sides top and bottom.
-Transport speed approx. 20 m / min.
-Different carton formats are each continuously adjusted in height and width via a quick adjustment system (without crank).
-Height adjustable via machine feet.
The machine can be demonstrated under power.
Gxauv8
Sealing machine for sealing cartons with self-adhesive tape.
The Heripack sealing machine takes over the cartons to be folded from the previous working process. Due to batch production, only one carton size is ever sealed with tape on the bottom and lid sides. The carton sealer is manually adjusted in advance to the desired carton size. The carton is fixed with the lateral conveyor belts and conveyed through the sealing process. Due to the large taper rolls, 990m running length (400mm outer...
ram force: 6,3 t
material thickness: 12 mm
centre distance: - mm
flat material: 80x12
slide stroke: 0...250 mm
ram speed - forward: 0,053 m/s
ram speed - reverse: 0,086 m/s
clamping surface area: 200x490 mm
total power requirement: ca. 4,0 kW
dimensions of machine: L: 1,7xB:0,8xH:1,35 m
HYDRAULIC BENDING MACHINE FOR FORMING AND FLAT PARTS
Machine body fixed with inclination of 10 °
Bending ram: ram stroke 0 ... 250mm; Ram speed forward / rewind 0.053 / 0.086 m / s; One-handed operation; Max. fo...
Carton-Stitcher Long arm Wire Stitching machine Polygraph 304
Year 1958 - Serial-No. 90
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately-
Zr2bmgah
-Can be inspect-
-On Stock Emskirchen / Nürnb
High precision, fast and versatile - the axial REB forming machines. They enable extreme degrees of deformation, complex geometries and fast tool changing. The tool sequence is positioned horizontally or vertically by a servo motor. With up to 6 forming steps and additional clamping units, virtually any requirement can be satisfied. Rotary stations can be integrated for specific forming. A touch panel with integrated data storage is used for operation. Machine parameters and specific machining s...
Carton sealing machine 3M Matic.
The carton sealing machine automatically adjusts to different carton formats.
Bottom and lid sealing
Adhesive tape width: 50mm
Carton width: 100mm - 550mm
Carton height: 110mm - 640mm
Bswnzl2rxg
Length: unlimited
Output up to 30 cartons/min
Connection: 3 P/ 400V/ 16A
Air pressure: 6 Bar
Professional, stable and compact packaging machine from a renowned European manufacturer for tape widths up to 50 mm. Maximum carton dimensions approx.: width 500 mm x height 500 mm; length unlimited.
Bs9yx7ldsk
-Locking on both sides top and bottom.
-Transport speed approx. 20 m / min.
-Different carton formats are each continuously adjusted in height and width via a quick adjustment system (without crank).
Height-adjustable and adjustable and lockable via foot rollers.
The machine can be opera...
curl forming machine 2,05m
New!
Direct from the manufacturer!
Width: 2050 mm
Max. Sheet thickness: 0.65 mm for Rm 400 MPa
Shaft diameter: 16 mm
Pipe diameter 31.8 / 3.6
Weight: 15 kg
We are looking forward to your contact!
Lxd92
Offer here an automatic carton sealing machine from Tesa, type Tesapacker 6030.
Cyhupykc
The machine works perfectly !
With it, cartons can be sealed all around, the max. size of the cartons may be - width of 120 - 520 mm, height of 240 - 520 mm,
the minimum length of the cartons should be 200 mm.
as seen on photos ! For further questions I am available with pleasure...
Shipping within Germany 69.- Euro
Carton-Stitcher Long arm Wire Stitching machine Polygraph 11002 - 70
Ciy3mqmg
Year - - Serial-No. -
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately-
-Can be inspect-
-On Stock Emskirchen / Nü
Helical forming machine - auger flights
-Capacity range thickness 2 mm up to 12 mm
helix pitch from 40 to 400 mm
outer dia from 100 to 1000/1200 mm
interchangeable heads and dies to cover wide range of production
interchangeable blades for the different pitch.
All tooling core hardened high resistance to wear
Machine hydraulic operated with electric digital control programmable for repeatability
memorize 100 programs. spring-back plate compensation for the wanted pitch.
O7yvh...
ROBOPAC semi-automatic carton sealing machine for the same series carton format ROBOTAPE 50 TBD W = 160 mm
F9ytmnl
- Set of 4 swivel castors with brake
- N. 2 tape winding heads upper / lower for tape 75 mm
- N. 2 Freil. Roller conveyor L = 500 mm / W = 500 mm
- Infeed conveyor front and rear
It can pack your product into carton box and close the box automatically.
The machine is equipped with a series of sensors and automatic protective devices to assure the machine runs safely and effectively. It includes open cartons, insert the products and leaflets into cartons, print
date number on the carton, close the carton and discharge cartons automatically. It's suitable for food, cosmetic, commodity and so on. It can connect with a Blister Machine, Pillow Packaging Machine, Shrink Wrappe...
Hydraulic Crimping Capacity: 3/16" - 2"
Molds: 11Pcs.
(15, 18, 21, 24, 27, 33, 39, 45, 51, 57, 66 mm)
Mold Parts: 8 Pcs.
Jaws Opening Capacity: +24 mm
Working Pressure: 20 - 350 Bar
Pressure Force: 200 Tons
Mold & Head Materials: 4140 & 7131 Steel
Mold Material Hardness: Special Profile, 60 Hrc Hardness
Adjustment Options: Micrometers
Distance Return Options: Digital
Br0jjqckbu
Pedal: Standart
Power: 380V 3PH, 4kW
Control Panel Power: 24V
Electric Motor: 4kW, 1500 Rpm/Min.
Lenght x Widht x Heigh...
Product Application
Side drive .Suitable for high efficiency requirements and link to production line , after setting a specified size of box, it seals only that size during that cycle.
Main Feature:
1.Side drive belts with automatic flaps fold function
2.Top and bottom tape head, seal top and bottom at same time or just seal top or bottom of carton with tape.
3.Tape width range from 48-75mm.
4.Independent electric control box for machine.
5.Emgency Stop switch For Operator
6.Blade guards for ...
Roll forming machine double shape profile OLMA
With all his double series of rollers and cutting mould for 2 kind of shape profiles
Compact and versatile
Fe9fvpz
N.14 stations x 2 different profile series
Distance between rollers 150mm
Rollers fast cahange
Entry guide rail
Independent cutting mould
Good manintenance, perfect shape, ready for production
It is possible check the machine anytime by appointment
ROLLS: 12
DISTANCE BETWEEN ROLLS: 180 mm
MATERIAL THICKNESS: 2-3 mm
MAX WIDTH: 400 mm
FEED SPEED: 15 m/min
STEPS: N. 14
MAX ROLL DIAMETER: 240 mm
WEIGHT: 8000 Kg
Xg9pw
OVERALL DIMENSIONS: 7500 x 2100 x 1500 mm
NOTE: 2- SLIDER TRACKS ROLL FORMING MACHINE; MOTOR- DECOILER CAPACITY 2000 + 2000 Kg; UNLOADER INCLUDED
PRICE: On demand
Ilkazell clean room cabin
Year of construction: 2013
Operating hours : 1960h
Decommissioning : 2016
Condition : Very well maintained condition, because little run
Intended use:
Enclosure of a thermoforming plant for thermoplastic forming process under clean room environment.
Location: F. S. Fehrer Automotive GmbH
97320 Großlangheim
On-site service / interface for dismantling
Electrical disconnected
All media lines disconnected
Parking space available for dismantling
Electricity/compressed air i...
Machine in good condition and perfectly working. It includes a chiller for mold water cooling and a chiller for heating element water cooling.
Bj8oz02i
Main advantages:
Btlay3zusm
• most advanced machine
• forming precision +/- 0,3 mm
• available with HMI panel or with manual steering
• quick re-tooling
• possibility of tooling customization
• forming in the I/O system
Technical features:
Supply voltage: 400 VAC 50 Hz
Control voltage: 24 VDC
Current: 32 A
Max. pressure: 120/60 bar
Max. flow: 42 l/min
Technical data:
ø tube: 38 mm - 120 mm
Forming length (according to ø): 100 mm
Tube thickness: 0,8 mm - 2 mm
Installed power: 11 kW
Dimensions w...
Production speed - Servo drive
Material range - 200 – 600m2 / Corrugated board - E/F/N flute
Cold or hot melt glue application
Production range - Min 100(W) x 100(L)
Max 450(W) x 580(L) Subject to design and lanes
Production speed - Max - 11,000pcs/hour/per lane - subject to design
and lanes
Eywhgynl
Additional forming module
Remote control console
One used BIHLER RM35 multislide wire/strip punching and forming machine, year of mfg 1983. Equipped with 5x forming slides and 7 ton press station, single gripper feed on right-hand side with straightener. Air clutch. Weight approx 2000 kgs. Max width of strip 32 mm. Max wire diameter 3 mm. Standard feed length 170 mm. Max operating speed 250 strokes per minute.
Cnt0sumo
automatic meat ball and fishball forming machine, beef balls, pork balls, fish balls, squid balls, 400-600kgs hour, 18-35mm diameter, stainless mobile frame, 3Ph
G7rpb7h
PRESSING AND JOINT FORMING MACHINE
MODEL; MAGRAF PK-50x40 PLUS
YEAR; 2021
Hydraulic pressure; 4000kg
Btbuca22nl
Roll forming, bending machine. Section roller
Can use for sheet plate,
U,L, T shape bar
pipe/tube bending
Bssrf0hgfc
Power : 30HP
Main advantages:
• universal two-slot machine
• small machine dimensions
• available with HMI panel or with manual steering
• easy to operate
• low failure rate
Technical features:
Supply voltage: 400 VAC 50 Hz
Ngv8pdwj
Control voltage: 24 VDC
Current: 25 A
Max. pressure: 120 bar
Max. flow: 35 l/min
Technical data:
ø tube: 38 – 100 mm
Forming length (according to ø): 100 mm
Tube thickness: 0,8 mm - 2 mm
Installed power: 7,5 kW
Dimensions with HMI panel: 1300 x 1000 x 1600
Dimensions without HM...
maximum reel width at the unwind station 637mm
minimum reel width at the unwind station 100mm
maximum reel diameter 600mm
Formed sleeve width : from 50 mm to 315 mm
Ybnv0
production speed 250m/min
materials: PET,PVC,OPS -thickness from 30my to 100my -perforation capability
One used BIHLER GRM50 multislide strip-punching and forming machine, equipped with 5x forming slides, 25 ton press and gripper feed on right-hand side. Air clutch. Weight approx 3700 kgs. Max width of strip 40 mm. Standard feed length 320 mm. Max wire diameter 5 mm. Max operating speed 250 strokes per minute.
Bmmpnw8lhd
