Used Cold Rolling Machine for sale (69,542)

Condition: ready for operation (used), functionality: fully functional, IMA P3C machine for portioning and packing butter into rolls, in 100 or 200 gram portions (currently). The machine can be offered in its current condition or fully refurbished. Blsdpfx Ajz Sy Dvofmjp

Condition: good (used), Equipment: documentation/manual, emergency stop, foot remote control, swiveling upper roller, – Capacity: 1020 x 1 mm – Roller length: 1020 mm – Diameter of upper roller: 50 mm Bodps Af Ap Tofx Afmslp – Diameter of lower roller: 55 mm – Diameter of rear roller: 60 mm – Foot pedal operation – Emergency stop switch – Documentation – 400V

Year of construction: 2008, condition: ready for operation (used), We are offering this ready-to-use Roll-o-Matic roller die-cutting machine, roller size 0.932/3000, manufactured in 2008. Usable roller width: 3000 mm. The upper roller has a diameter of 320 mm and is equipped with a PA or cast nylon cutting sleeve. The roller gap can be adjusted independently on both sides and is equipped with an absolute value display for the roller gap. Operating modes: setup operation; semi-automatic operation; fully automatic operation with a light barrier and time control. Includes 5 conveyor belts, a counter, and additional equipment: support rollers for the lower roller to reduce deflection under high load. Chain drive and more powerful motor. Includes control buttons on both sides. Bsdpfx Aez Ag Ukefmslp If you have any questions or require more information, please send us a message or call us.

Condition: used, For self Adhesive  Labels and Wet Glue Format Parts for Bottle Size 0.375l , 0,75l , 2.0l Technical data: working direction: left-right, rotative, clockwise capacity bph max.: 10000 labels: self adhesive labels, cold glue paper labels number of labelling stations: 4 number of bottle plates: 10 bottle diamater max (mm): 120 bottle diamater min (mm): 50 bottle height max (mm): 350 bottle height min (mm): 160 motor height adjustment: yes Bleds Ahk Rvjpfx Afmjp speed adjusment: frequence converter

Condition: good (used), functionality: fully functional, Year of construction: 2010, control type: manual, actuation type: hydraulic, number of rollers: 3, sheet thickness (max.): 5 mm, sheet thickness stainless steel (max.): 3 mm, sheet thickness aluminum (max.): 6 mm, overall weight: 1,100 kg, Equipment: centralized greasing system, cone bending device, emergency stop, foot remote control, hardened rollers, swiveling upper roller, Bending length: 1.050 mm Bendingcapacity: 5.0 mm Steel 3.0 mm Stainless steel 6.0 mm Aluminium Upper roll: Ø130 -> 75 mm Lower rolls: Ø130 mm Featured with: - Hydraulic drop end - 3-rolls driven - Hand-footcontrolled Bsdpfxjz Tdg Dj Afmslp

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, actuation type: electric, roller diameter: 90 mm, working width: 1,270 mm, sheet thickness (max.): 3 mm, overall weight: 520 kg, power: 1.1 kW (1.50 HP), input voltage: 400 V, rotational speed (max.): 6 rpm, type of input current: three-phase, Equipment: cone bending device, emergency stop, foot remote control, hardened rollers, swiveling upper roller, sheet metal roll bending machine BOLUK BM 1270 x 90 - 2.5 mm NEW! for sale. manufacturer: BOLUK 1270X90mm year of manufacture: 2024 Bending Length: 1270 mm Bending capacity: 2.5 mm Roller diameter 90 mm - SAE 1050 certified high tensile steel rollers - Wire grooves at the ends of the rollers (4/6/9) mm - Manually adjustable rear roller - Mobile control panel with foot pedal - Precision bending with brake motor Bledexhub Aspfx Afmep - Conical bending device - Manually foldable end - Cast iron main frames Bending speed 6m / min Motor power 1.1 kW 50Hz 380v Wire groove diameter 4/7/10 mm Machine dimensions 1850x700x1200 mm Weight 520 kg

Condition: good (used), overall weight: 2,300 kg, spindle diameter: 0 mm, total height: 1,375 mm, total length: 1,645 mm, total width: 1,520 mm, One - Good used Profiroll Model UPWS 16 - 16 ton Hydraulic Thread Rolling Machine with swivelling spindles for in-feed or thru-feed rolling. Max threaded dia. 70mm Min. threaded dia. 3mm, Max width in=feed rolling: 150mm, rolling spindlle dia.: 69.85mm power of main motor: 6.5 kw Bedpfxjzt R T Eo Afmelp Complete with coolant equipment, work rest blade holder and five sets of thread dies.

Year of construction: 1999, condition: used, functionality: fully functional, We are offering this used CMC Cevenini ET7 roll slitting machine, manufactured in 1999, for sale. The machine has been fitted with a new control system and is in good used condition. Only the compressed air hoses should be replaced when the opportunity arises. The machine is currently out of operation and is being sold due to a new acquisition and space constraints. Bjdpfx Afjzzq E Rsmelp It is ideal for beginners who are looking for a reliable machine in the adhesive tape or film segment. It is also excellent as a core cutting machine. The price is negotiable. We welcome suggestions. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Akbend ASM140 Bending Rolls Blsdpoz Hdv Dofx Afmjp 3 Rolls 140mm top roll 1250mm length x 5mm thickness Year 2007 Motor power 2.2kw

Condition: used, operating hours: 15,034 h, total length: 7,700 mm, total width: 2,300 mm, total height: 1,700 mm, Year of manufacture: 1980 Colour: Green Empty weight: 10.000 kg Price: On request - Year: 1980 - Serial number: 1500 - Operating hours: 15034 - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 2 - Power [kW]: 6.0 - Max. sheet thickness [mm]: 8 - Max. prebending thickness [mm]: 8 - Max. working width [mm]: 3000 - Top roll diameter [mm]: 300 - Bottom roll diameter [mm]: 220 - Options: Cone rolling, Plate support - Transport dimensions: 7700mm x 2300mm x 1700mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Bledo Agwvxepfx Afmjp Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), overall weight: 1,350 kg, spindle diameter: 40 mm, type of input current: three-phase, total height: 1,500 mm, total length: 1,000 mm, total width: 1,000 mm, One - Very Good Used ORT Model RP10/U - 10 ton Hydraulic Thread Rolling Machine with swivelling spindles for in-feed or thru-feed rolling Max. threaded diameter: 30mm Min.threaded diameter: 2mm Max. width in-feed rolling: 65mm Bodpfx Aszt R Rwofmslp Power of main motor: 4 kw Complete with coolant equipment , work rest blade holder ,open fronted spindle front supports for easy access with small dia. components - 13 set of in-feed thread dies

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, input voltage: 400 V, total width: 100 mm, total length: 180 mm, overall weight: 450 kg, König Mini Rex Futura 4000, 2-row Bljdpfjz I Dnvsx Afmep small bread dough divider and rounder Drum and pistons SKG54-AKG70 Weight range: 25–140 grams Capacity adjustable from 1,500–4,000 pieces per hour Computer-controlled with 50 programs Year of manufacture: 2006 Machine is in good working order, operating video available!

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 0049, overall weight: 12,000 kg, Manufacturer: Profiroll Type: UWRA 160S Control system: Siemens Bsdpfx Afez Tznromjlp Machine type: Ring rolling machine Pressing force: 63 t Max. outer diameter of round parts: 160 mm Dimensions: 80 mm Roller bore: 30/100

Condition: ready for operation (used), Year of construction: 1996, Picot rolling machine Type RCS 205 – 30 cn Capacity: 6 mm rolling and 4 mm edging CNC controlled Year: 1996 Bjdpfxoz Rvlye Afmolp Rollers in very good condition Minimum coil diameter: 266.5 mm (6 mm rolling and 4 mm edging) Maximum coil diameter: 2050 mm (10 mm rolling and 6 mm edging)

Condition: used, functionality: fully functional, Year of construction: 1992, machine/vehicle number: 10842, We are offering this pre-owned sheet metal rolling machine Chr. Häusler VRM-hy 3000x15, year of manufacture 1992. Model: VRM-hy 3000×15 Serial number: WO 10842 Year of manufacture: 1992 Blsdpfx Aex Sqc Tofmep If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), workpiece weight (max.): 80,000 kg, grinding diameter: 1,580 mm, grinding length: 7,500 mm, Manufacturer: Farrel Type: 60" x 24" Heavy Duty Year of manufacture: 1960 Travelling wheel machine with CROWNING and CONCAVING grinding Equipped with stones / flanches / lubrication / coolant system Maximum diameter full size wheel 1550 mm Work swing over bed 1580 mm Work load 180,000 pounds (81,000 kg) Grinding length 7500 mm Specifications Metric US Standard Center height 930 mm Grinding diameter Ø 1860 mm Grinding length 7500 mm Grinding stone dimensions 1080 x 180 mm Grinding stone speed 400 - 100 rpm Tailstock 260 x 1250 Mk Bsdpfx Afor Ikvmomolp Coolant system Yes filter Yes Dimensions (estimate) length 13200 mm width 4250 mm height 3200 mm weight 80000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details. Share on download Travelling wheel machine with CROWNING and CONCAVING grinding Equipped with stones / flanges / lubrication / coolant system Maximum diameter full size wheel 1550 mm Work swing over bed 1580 mm Work load 180,000 pounds (81,000 kg) Grinding length 7500 mm Center height: 930mm Grinding diameter Ø: 1860mm Grinding length: 7500mm Grinding stone dimensions: 1080 x 180mm Grinding stone speed:400 - 100Rpm Tailstock: 260 x 1250Mk Coolant system: Yes Filter: Yes Length: 13200mm Width: 4250mm Height: 3200mm Weight: 80000kg Aluminum Industry Non-Ferrous Industry Paper Industry Roll Manufactures Steel Industry Plate Mill Hot Rolling Mill Cold Rolling Mill Travelling wheel machine with CROWNING and CONCAVING grinding Equipped with stones / flanches / lubrication / coolant system Maximum diameter full size wheel 1550 mm Work swing over bed 1580 mm Work load 180,000 pounds (81,000 kg) Grinding length 7500 mm Center height: 930inch Grinding diameter Ø: 1860inch Grinding length: 7500inch Grinding stone dimensions:1080 x 180inch Grinding stone speed:400 - 100Rpm Tailstock: 260 x 1250Mk Coolant system: Yes Filter: Yes Length: 519.684inch Width: 167.323inch Height: 125.984inch Weight: 176449.6lbs Aluminum Industry Non-Ferrous Industry Paper Industry Roll Manufactures Steel Industry Plate Mill Hot Rolling Mill Cold Rolling Mill Aluminum Industry Non-Ferrous Industry Paper Industry Roll Manufactures Steel Industry Plate Mill Hot Rolling Mill Cold Rolling Mill

Condition: reconditioned (used), workpiece diameter (max.): 60 mm, roll diameter: 185 mm, roll width: 150 mm, One - Reconditioned ORT Model RP18 - 18 ton Hydraulic Thread Rolling Machine with fixed rolling spindles for in-feed rolling or thru -feed rolling with helical thru-feed dies. Including new rolling spindles , new bearings and new worm gears & shafts etc Max rolling dia: 60mm - Max rolling width with in-feed dies: 150mm - Max rolling width with thru-feed dies: infinite Spindle diameter : 69.85mm & 80mm - Power of main motor: 7.5kw Bedpfoyml Ekex Afmjlp With one pair of spindle sleeves 69.85mm i.d. x 80mmo.d. & 17 sets thread dies 60mm, 120mm & 180mm wide from M6 to M24 Photographs taken before reconditioning

Condition: used, functionality: fully functional, Year of construction: 2004, machine/vehicle number: 220692, Equipment: emergency stop, sheet width 1550 mm plate thickness 6 mm diameter of upper rolls 228 mm drive elektronisch zwei angetri Bledpfozxt Txsx Afmjp

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: 4691, thread length: 125 mm, overall weight: 2,000 kg, workpiece diameter (max.): 70 mm, spindle diameter: 6,985 mm, type of input current: three-phase, roll diameter: 195 mm, spindle speed (max.): 90 rpm, spindle speed (min.): 20 rpm, total height: 1,185 mm, total length: 1,320 mm, total width: 1,090 mm, This is a fine example of a very little used Eurfurt thread rolling machine. Although the machines signifies 12.5tons it can easily achieve 20tons rolling force. Bedpfx Ajzhw Edsfmelp Comes with all original equipment supplied. Machine can be used in manual, semi-automatic and automatic cycles and also has the facility to re-roll. Can be seen running.

Condition: used, sheet width 3000 mm plate thickness 6 mm Bsdpfx Ae Ahkinsfmjlp pre-bending 4 roll diameter 205 mm total power requirement 5 kW weight of the machine ca. 3,7 t dimensions of the machine ca. 4,0 x 1,4 x 1, 5 m Roundo 3-roll plate bending machine, featuring: - Hydraulic drop-end bearing and remote control - Conical bending attachment: a device for rolling cones and funnels.

Condition: new, Year of construction: 2026, roller (bottom) diameter: 70 mm, roller (top) diameter: 70 mm, side roll diameter: 70 mm, roller length: 1,050 mm, – Capacity 1050 × 1.8 mm – Bending capacity 1050 × 1.5 mm – Roll diameter 70 mm – Minimum bending diameter 105 mm – Conical rolling – Swing-out upper roll – Brake motor – Foot control – Emergency stop – Documentation – 400V Bljdpfx Ajyrn Ixsfmsp

Condition: used, Year of construction: 2015, functionality: fully functional, total height: 3,840 mm, total width: 4,200 mm, total length: 10,840 mm, overall weight: 73,500 kg, Oskar Frech GmbH & Co. KG Cold chamber die casting machine DAK 1600-133 and additional equipment The system is used for the production of die castings made of aluminum, magnesium, or copper alloys, which are manufactured using the cold chamber die casting process. Clamping force 16,000 kN Clamping stroke 1,200 mm Casting volume 3,014 – 12,057 cm³ Total weight of the system 73,500 kg Dimensions of the system Length 10,840 mm Width 4,200 mm Height 3,840 mm The system is equipped with the following additional units: Metering furnace, manufacturer Westomat, type 1700 S, capacity 1,700 kg Mold release spray system, manufacturer Gerlieva, type GS 1600/1800 T Metering furnace, manufacturer Meltec AVDF 1800/10 K, consisting of an aluminum melting furnace and a vacuum metering unit. The entire system is designed to allow fully automated operation for die casting of workpieces when used in conjunction with automation components. All necessary interfaces for communication and monitoring are available. Oskar Frech GmbH & Co. KG is one of the leading manufacturers of die casting machines worldwide. The DAK 1600-133 is the largest machine in the smallest series currently manufactured by Frech. Automation of the die casting system, manufacturer Frech, type DAK 1600-133, using an automation cell, manufacturer Reis. Blodpjz Eblajfx Afmsp These units are primarily used for removing the workpieces produced by the DAK 1600-133 die casting machine.

Condition: used, Offered for sale is a hydraulic three-roll plate bending machine. Bending width: 3000mm. Pre-bending capacity: 31mm at 3000mm plate width. Reference material: Steel with yield strength of 240N/mm². Pre-bending diameter at specified capacity: greater than 630mm. Control system: Separate control panel with joystick control for roll and support adjustment. Equipped with hydraulically adjustable bottom rolls, overhead plate support, side plate support and hydraulically operated drop-end bearing. Inspection possible by arrangement. Bledpfxo Ad Nq Uj Afmop

Condition: used, Offered for sale is a hydraulic three-roll plate bending machine. Pre-bending capacity X/Y: 3000mm/15mm. Bending width: 3000mm. Reference material: Steel. Tensile strength of the reference material: 45-47kp/mm². Yield strength of the reference material: 25-27kp/mm². Equipped with hydraulically adjustable bottom rolls, hydraulic drop-end, plate support with vertical guide mast and support arm, and machine-mounted push-button control panel. Inspection possible by arrangement. Bsdo Ad Nrlepfx Afmolp

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, control type: manual, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller diameter: 90 mm, working width: 1,550 mm, roller height adjustment: 110 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, overall weight: 600 kg, total length: 2,300 mm, total width: 700 mm, total height: 1,150 mm, power: 1.1 kW (1.50 HP), input voltage: 400 V, input frequency: 50 Hz, Equipment: cone bending device, emergency stop, foot remote control, hardened rollers, swiveling upper roller, AKYAPAK AS 1550x90 sheet metal bending machine 1550mm x 2.5 mm, 3 rollers /ct2289/ Electric, pedal-operated rolling machine. Strong, robust construction. The upper roller can be rotated to remove the workpiece Convenient to use, suitable for workshops and industry Bedpfxjxmvgko Afmelp Manufacturer: AKYAPAK AS 1550X90mm Year of manufacture: 2002 Bending Length: 1550 mm Bending capacity: 2.5 mm Roller diameter 90 mm - SAE 1050 certified high tensile steel rollers - Wire grooves at the ends of the rollers (4/6/9) mm - Motorized adjustable rear roller - Mobile control panel with foot pedal - Precision bending with brake motor - Conical bending device - Manual folding end - Cast iron main frames Bending speed 6m / min Motor power 1.1 kW 50Hz 380v Wire groove diameter 4/7/10 mm Machine dimensions 2400x800x1200 mm Weight 600 kg