Plate bending machine with 3 rolls

BOLUK BM 1270X90 2,5mm

Condition: used, Year of construction: 2000, Ateco 12 mtr Year 2000 Dedpfx Acoxxdmcensck Working height 12 m Own batteries Working well No license plate

Condition: excellent (used), Year of construction: 1996, spindle bore: 160 mm, Swing over bed Ø 1040 mm Swing over cross slide Ø 710 mm Swing in the gap Ø 1580 mm DBC Turning Length 3000/4500 mm Gap length 1500 mm Spindle bore Dodpfxjxtbf Es Acnjck 160 mm Spindle power 40 kW Bed width 800 mm Spindle taper 6 Mk Workpiece weight 3500 Speeds / ranges 800 Rpm Feed rate X-Axis 10000 mm/min. Feed rate Z-Axis 10000 mm/min. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), mileage: 493 km, power: 368 kW (500.34 HP), first registration: 06/2024, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, operating hours: 1 h, Equipment: ABS, AdBlue, air conditioning, crane, cruise control, electric window regulation, fog lights, navigation system, power mirror, soot filter, spoiler, = Additional Options and Equipment = - Aluminum fuel tank - Leaf suspension - Power-assisted brakes - Low noise - Speed limiter - LED lights - Alloy wheels - Air horn - Particulate filter - Side skirts - Sun visor - Stability control - Power Take-Off (PTO) = Additional Information = Transmission Gearbox: I-Shift, automatic Axle Configuration Dcjdpsuxviqsfx Acnok Front axle 1: Alloy wheels; Steering Front axle 2: Alloy wheels; Steering Rear axle 1: Twin tires; Alloy wheels Rear axle 2: Twin tires; Alloy wheels Weights Unladen weight: 21,160 kg Functional Mast: Telescopic (8 sections) Mast length: 22 m Lifting capacity: 18,000 kg Lifting height: 2,200 cm Crane: HIAB X-HIPRO 548 E-8, mounted behind the cab Body manufacturer: HIAB X-HIPRO 548 E-8 CE mark: yes Condition Technical condition: very good Visual condition: very good NEW VOLVO FMX 500 8X4 WITH HIAB OPT25S56 ROLL-OFF TIPPER + HIAB X-HIPRO 548 E-8 CRANE EURO 6 L PACKAGE 500 HP DRIVE 8X4 AP AXLES LEAF SUSPENSION WHEELBASE 510 CM NEW FMX MODEL CAB WITH AIR CONDITIONING AUTOMATIC GEARBOX WITH ENGINE BRAKE ALCOA WHEELS HIAB 25 TON ROLL-OFF TIPPER TYPE: OPT25S56 ADJUSTABLE UNDER-RUN PROTECTION HIAB X-HIPRO 548 E-8 CRANE 8X HYDRAULIC EXTENSIONS RADIO REMOTE CONTROL 5TH AND 6TH FUNCTION ON THE CRANE OIL COOLER FOR CRANE HYDRAULICS MAX LIFTING CAPACITY 18,000 KG MAX WORKING HEIGHT 2,200 CM MAX LIFTING CAPACITY AT 1,960 CM 1,720 KG 4X OUTRIGGERS NEWLY FITTED UP TO 2023!!! 2 AVAILABLE FROM STOCK FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPANOL WE SPEAK ENGLISH

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dsdpfx Acjdrtalonock Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Year of construction: 2019, condition: new, Recirculating air convection furnace Gas-fired furnace CGN Powder coating oven NEW – SGS-800/O Gema Optiflex Width: 2500 mm, Height: 2500 mm, Depth: 12500 mm Directly from the manufacturer. Dodpfx Acocw Tzxjnjck For more information, visit Romer-Deutschland.

Year of construction: 2024, condition: new, Motorized sheet metal shear Technical data Cutting capacity: 2.5 mm Cutting length: 2550 mm Cutting angle: 1°40′ Stroke rate/min: 35 1/sec Motor power: 3 kW Back gauge range: 550 mm Table width: 400 mm Table height: 850 mm Height: 1260 mm Width: 1350 mm Length: 3100 mm Weight approx.: 1540 kg Djdpfx Aohk Nf Rocnock

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. Djdpfofz U S Esx Acnjck - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: new, functionality: fully functional, operating pressure: 250 bar, high-pressure hose length: 10,000 mm, fuel: super 95, overall weight: 56 kg, warranty duration: 24 months, Technical specifications: Pump capacity (l/h) 900 Operating pressure (bar) 250 Maximum pressure (bar) 300 Water connection R 3/4" Power type: Gasoline Engine type: G390FA High mobility Color: Anthracite Weight with accessories (kg) 56.8 Dimensions (L x W x H) (mm) 878 x 538 x 702 Included: Spray gun High-pressure hose length: 10 m Power nozzle Water filter Equipment: Protective frame Crankshaft pump with ceramic piston Independence: Independence from external power sources. Complies with EU Stage V emissions standards. Convenient hand start. High mobility: Large inflatable wheels for comfort on difficult terrain. The compact and small unit is very easy to maneuver even in tight spaces. Fits in a car. Solid and durable device: The sturdy tubular construction protects the pump from damage. A thermal valve protects the pump from overheating during circulation. A crankshaft pump with ceramic pistons. Dsdjwiwv Ijpfx Acnjck The compact Kärcher HD 9/25 G Classic high-pressure cleaner without water heating is the ideal choice for those new to using gasoline-powered devices. The device is very easy to transport in a car and enables the successful completion of even the most demanding cleaning tasks, for example, on a construction site or in municipal areas. The device offers a working pressure of up to 250 bar and is equipped with a durable crankshaft pump and a pumping capacity of 900 liters per hour. User-friendly operation is ensured by an integrated gasoline engine (EU STAGE V), which allows the device to operate independently of external power sources. Inflatable wheels ensure the necessary mobility on site, an ergonomic handle for easy transport, and practical storage space for accessories. Important parts are easily accessible for maintenance and effectively protected by thermostatic and safety valves. The HD 9/25 G Classic's sturdy steel frame also prevents external and mechanical damage. The device does not have the ability to draw water from alternative sources.

Condition: good (used), Year of construction: 2005, operating hours: 32,870 h, functionality: fully functional, machine/vehicle number: 6030578, turning diameter: 32 mm, spindle speed (max.): 8,000 rpm, bar diameter (max.): 32 mm, We offer for sale Traub TNL26K automatic cnc lathe. Machine is connected to power and can be inpected every time by prior appointment. Year of built: 2005 Spindle passage 32mm Main spindle: 6.7/10.7kW; 8000rpm Counter spindle: 6.7/10.7kW; 8000rpm Upper turret: 12pos. 12x12/16x16, driven tools 2/5.5kW, 0-6000 rpm, 6.4/21 Nm Lower turret: 12pos. 12x12/16x16, driven tools 2/5.5kW, 0-6000 rpm, 6.4/21 Nm Connected load: 24kW Dcsdpevldx Aefx Acnek Barfeeder: FMB Turbo 5-42/4200mm Swarf conweyor: Knoll 240 S1/100 Coolant Kompaktbandfilter: Resy Machine is sold with a lot of toolholders not driven and driven - list on attached photo.

Condition: refurbished (used), ECCENTRIC PRESS SGP Dcedehqqnzopfx Acnek TYPE : PEZZ 500/1700/1000 PRESSURE : 500t DOWN TABLE DIMENSIONS: 1700x1000mm LENGTH OF STROKE: 20-153mm DISTANCE BETWEEN RAM -TABLE: Min 700mm , Max 800mm WEIGHT: 40.000 kgr MADE IN AUSTRIA