Used Cross Wedge Rolling Machine for sale (90,598)

Condition: ready for operation (used), Year of construction: 2007, Escofier Flex 40 Auto loading system Bkruqazv3Q Cold Forming Machine, Spline Threading machine

Condition: new, Year of construction: 2024, Automatic Repetitive cutting machine with extreme accuracy and speed with servo motor motion system for profiles and other mass production profile cutting operations. Bvmgjq8F Ø600 mm saw 90° cutting angle PLC control system Automatic profile slicing feature 3 x horizontal and 3 x vertical clamping (pneumatic) 3,0 m support right side conveyor with rollers Possibility to create cutting list Protection cover system with safety switch Cutting length min./max.: 4 mm/∞ Saw output height is adjustable Hydro-pneumatic cylinder and cooling system

Condition: good (used), Year of construction: 2018, Functionality: unexamined, machine/vehicle number: 25001, "- Number of threading stations: 1 to 3 - Chuck usage during the cycle: 2 - Type of tip/reference tip usage mode used during the cycle: 3 - Type of locating tip used: 4 - Position of the locating tip when clamping the workpiece: 5 to 80 mm - Transfer speed between loading and threading stations: 1 to 1000 m/s - Transfer position for loading and unloading: 0 to 795 mm - Transfer position for thread station 1 and/or 2 and/or 3: 0 to 795 mm - Free text for operator support: 9 - Thread type (Syncroll, incremental): 10 - Raw diameter before thread cutting: 1 to 200 mm - Base diameter before thread cutting: 1 to 200 mm - Tooth offset of the workpiece: -5 to +5 mm - Number of workpiece teeth: 1 to 200 - Difference in center distance between workpiece and discharge: 0 to 100 mm - Maximum permissible force (machine failure if exceeded): 0 to 330 kN - Start position adjustment for knurl before thread cutting: 0 to 359.999° - Knurling speed and direction: 0 to 45 rpm - Force tolerance for faulty workpiece (machine failure at the end of the cycle): 0 to 330 kN - Torque tolerance for faulty workpiece (machine failure at end of cycle): 0 to 150 % - Marking diameter for workpiece (Syncroll tapping): 1 to 200 mm - Rotation speed for marking (Syncroll thread cutting): 0 to 45 rpm - Feed speed of the carriage for marking (Syncroll thread cutting): 0.01 to 5 mm/s - Penetration time for marking (Syncroll thread cutting): 0 to 10 s - Penetration speed (Syncroll thread cutting): 0.01 to 5 mm/s - Planing time (Syncroll thread cutting): 0 to 10 s - Return stroke of the slide for metal relief (Syncroll thread cutting): 0 to 5 mm Bsl7Iqy8Izu - Return stroke speed of the slide for relief (Syncroll thread cutting): 0.01 to 5 mm/s - Knurled position at the end of the thread (Syncroll tapping): 0 to 359.999° - Knurling position at thread completion (incremental tapping): 0 to 359.999° - Knurling position at the end of the slide feed (incremental thread cutting): 0 to 359.999° - Knurling speed when approaching the workpiece (incremental thread cutting): 0 to 45 rpm Full supporting documentation (electronic format), including: Operating instructions drawings Certificate of conformity Consumables lists Backup files etc. Additional information: - Available immediately - All UK duties paid - Sale loaded on low loader - Shipping quotes available on request - Nissan Asset Ref: AF206614 - Acquisition cost €500k+ - Condition: Professionally dismantled, tagged, packed and stored in Liverpool, UK"

Condition: excellent (used), Year of construction: 1983, Functionality: fully functional, machine/vehicle number: 4691, thread length: 125 mm, overall weight: 1,900 kg, type of input current: three-phase, roll diameter: 195 mm, spindle speed (max.): 90 rpm, spindle speed (min.): 20 rpm, roll width: 125 mm, year of last overhaul: 2024, Manufacturer WMW Modul (Germany) Model UPW 12.5.1 Condition Used Make WMW (Germany) Model UPW 12.5.1 Max. Rolling Force 12.5 Tons Job Diameter Range 3 mm to 70 mm Max. Thread Length 8000 mm Max. Thread Length (in Plunge Method) 125 mm Maximum Pitch 4 mm Thread Roll Size Width 125 mm x 195 mm Diameter Spindle Speeds 20 rpm to 90 rpm Type Hydraulic Other Information 1 - It can work in auto-cycle mode and manual mode. Other Information 2 - Machine is in excellent working condition. B0Bgxm89

Condition: used, Year of construction: 1978, Functionality: fully functional, machine/vehicle number: 24324, thread length: 160 mm, overall weight: 3,200 kg, workpiece diameter (max.): 75 mm, spindle diameter: 6,985 mm, roll diameter: 210 mm, spindle speed (max.): 90 rpm, spindle speed (min.): 30 rpm, total height: 1,600 mm, total length: 2,000 mm, total width: 1,600 mm, roll width: 160 mm, In working condition Jpav8L

Condition: excellent (used), Year of construction: 2007, 2 x Cross strapping machine Manufacturer: SMB Cric8X3Zcz Model: N5EK Year of manufacture: 2007 Condition: very good, see photos

Condition: good (used), Year of construction: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine Bcyzvkellt3 -Manufacturer: Zimmermann, universal milling machine type FZ 1 with extensive accessories -rotating cross table: 490 x 400 mm -Travel: X/Y/Z 320/385/430 mm -Spindle holder: SK30 -Drive: 1.1 kW -Speed: 560 to 14000 rpm, 8-stage -Accessories: incl. see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg

Year of construction: 2016, Condition: used, Used machine Cross sanding machine Year of construction 2016 Product advantages Underneath perfectly lacquered, stained or oiled wood surfaces there is always a perfectly sanded surface! Felder sanding machines are characterized by solid construction, state-of-the-art machine technology and maximum productivity. The most important highlights at a glance: ? Sanding width 1350mm ? Sanding width 3-170mm ? Combined superfinishing unit ? Touch-screen control for work processes ? The Felder operating concept guarantees maximum process and work safety Your advantages at a glance: Time saving ? Motorized adjustment of the contact roller in the 1/100 mm range from the control panel ? Innovative unit arrangement for pre-sanding / fine sanding of veneered workpieces ? Brushing devices at the machine outlet ? Lacquer sanding against additional equipment ? comfort ? Fixed feed table height (machine head adjusts) ? Touch screen control with clear image display and program memory ? Machine data acquisition for sanding belt wear and much more. ? Tool-free handling when changing the sanding belt ? Large fold-down table extensions for the heaviest workpieces ? flexibility ? Units for calibration, fine sanding and lacquer sanding ? Variable feed speed up to 20 m/min by means of inverter Innovation ? Electronically segmented sanding pad with silicone technology for minimum air consumption ? Combined superfinishing unit incl. chevron sliding belt to compensate for oscillation marks ? quality ? Solid machine construction ? Durable machine components Basic equipment Control unit finish 1350 classic Control unit with 7" color touch screen 100 program memory locations Maintenance intervals Plain text error messages Ammeter for load monitoring Feed table fixed infeed height - fixed table, 900mm, electric height control of the units incl. fine adjustment from the control panel, V-speed infinitely variable from 2.8-20m/min. Adjustable via inverter from the control panel Manual protection and workpiece over-thickness protection Workpiece detection sensor with 25 sensors 55 mm segment width Bka09Wjg7Uw Endlessly manufactured belt conveyor with honeycomb structure Automatic feed carpet centering Cross sanding unit finish 1350C high gloss Segmented, electronic-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Chevron sliding belt between sanding pad Sanding belt for homogeneous sanding without oscillation marks Variable pressure control on the operating side Electro-pneumatic sanding belt oscillation Electronic sanding belt run-off protection 1 motor with 7.5 kW (10 hp) Star-delta start-up Cleaning fan with time control Cutting speed 12 m/sec Sanding belt 140 x 4560 mm Combined superfinishing unit 1350C: Rubberized, grooved contact roller with 85-90° Shore hardness and 142 mm diameter Electromot. Position-controlled grit compensation segment, electro-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Variable pressure control on the operating side Chevron sliding belt between sanding pad and sanding belt belt for homogeneous sanding without oscillation marks Mechanically pre-tensioned rubber pressure rollers Electro-pneumatic sanding belt oscillation Electronic sanding belt run-off protection

Condition: used, Year of construction: 1988, Technical details: throat: 138 mm plate thickness: max. 1,12 mm infeed height: 1125 mm voltage: 380 V total power requirement: 0,25 kW weight of the machine ca.: 0,149 t dimensions L x W x H: 0,9 x 0,6 x 1,4 m Ci8Bqojh -application: bending of beads / flanging -shaft distance max./min.: 65 / 52mm manually adjustable via handwheel -currently beading tool Ø 8mm built in -stop plate 130mm adjustable operation at the control box and via foot switch The machine is mounted on a steel construction. *

Condition: used, Horizontal honing machine (cross grinding machine) PEMAMO HONING (Switzerland) Type MDR 120 E No. 293 Year of construction 1996 Honing range Ø 1.5 - 70 mm Spindle speed 310 to 1860 rpm infinitely variable Motor power 0.37 kW Mains connection 400 Volt, 50 Hz - Expanding diameter infinitely adjustable via handwheel - Semi-automatic expanding unit AR 340 with a repeat accuracy of 1 µm Expansion speed continuously adjustable from 1 to 120 sec. Dwell time infinitely adjustable from 0-30 sec. Automatic switch-off when the desired diameter is reached Automatic return to the initial diameter Repeat accuracy within 1 µm Honing range switchable in 2 stages Ø1.5-20 mm + Ø21-70 mm - Stepless spindle speed via variator gearbox - Start/stop via foot switch - Built-in cooling and lubrication system with oil circulation, honing oil tank with 15 liter pump - Support arm as round rod Ø 15 mm, length 320 mm, with adjustable stop ring - 10 honing tools for nominal diameters 8 / 10 / 12 / 15 / 16 / 17 / 19 / 20 / 25.4 / 30.5 - 31.5 mm Machine dimensions L x W x H: 1000 x 700 x 520 mm Dqmuxr weight: 160 kg good condition The machine is used for the specialized honing of bores, e.g. piston cylinders, in order to to achieve the required dimensions, tolerance and high surface quality. Thanks to the honing machine, shape defects such as scratches, axis curvatures or waviness are eliminated.

Condition: excellent (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: 2666, thread length: 3,000 mm, overall weight: 1,200 kg, workpiece diameter (max.): 30 mm, spindle diameter: 40 mm, type of input current: three-phase, roll diameter: 135 mm, total height: 1,500 mm, total length: 1,000 mm, total width: 1,000 mm, roll width: 70 mm, Excellent used ORT 10 ton Hydraulic Thread Rolling Machine complete with 5 sets of thread dies Dpl3Up

Condition: excellent (used), Year of construction: 2012, Functionality: fully functional, Escofier I300V Gear rolling machine CNC thread rolling and polishing machine Crkyydmlnc manufactured by Escofier, type Flex 40 Syncroll, year 2012 Control Siemens, type Sinumerik

Condition: used, Year of construction: 1979, Functionality: fully functional, machine/vehicle number: M14L/8558, Offer Number: M14L/8558 Machinetype: thread rolling machine - flat die Info: vibratory feeder Bjztpyu3Spa Make: MENN Type: GW62 Constr. year: 1979/2023 diameter range: 3-8 mm shaft length under head: 100 mm max. thread length: 55 mm output pieces/min: 300 Location: In our warehouse

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type UPW 24 serial no. P07.0003-144 year of construction 2007 Rolling force max. 24 ton. Tool diameter max. 270 mm Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Motor power hydraulics 3 kW Motor power roller drive approx. 5.5 kW Mains connection 400 Volt, 50 Hz, 10 kW - Pivoting roller spindle for threaded through-feed rollers - Rolling spindle speed in 4 stages via gear changeover - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1450 x 190 mm Weight approx. 3 tons Very good condition Grooving rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Lpc3A32 Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Condition: used, Year of construction: 1973, Functionality: fully functional, machine/vehicle number: M14L/8559, Offer Number: M14L/8559 Dnmsxd Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: MENN Type: GW62 Constr. year: 1973/92/23 diameter range: 3-8 mm shaft length under head: 80 mm max. thread length: 55 mm output pieces/min: 300 Location: In our warehouse

Condition: used, Year of construction: 1974, Functionality: fully functional, machine/vehicle number: M14L/8630, Offer Number: M14L/8630 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: MENN Type: GW52 Constr. year: 1974/24 diameter range: 2,5-6 mm shaft length under head: 80 mm max. thread length: 40 mm output pieces/min: 600 Location: In our warehouse U3Et9L9G

Condition: used, Year of construction: 1987, Functionality: fully functional, machine/vehicle number: M14L/8631, Offer Number: M14L/8631 Machinetype: thread rolling machine - flat die Info: vibratory feeder Nmdwbczmxj Make: MENN Type: GW63 Constr. year: 1987/24 diameter range: 3-8 mm shaft length under head: 80 mm max. thread length: 58 mm output - pieces/min: 250-480 Location: In our warehouse

Condition: used, Year of construction: 1970, Functionality: fully functional, machine/vehicle number: M14I/8805, Offer Number: M14I/8805 Machinetype: thread rolling machine - flat die Make: MALMEDIE Type: AG20 Constr. year: 1970 diameter range: 20 mm shaft length under head: 200 mm Bjztodai78O max. thread length: 125 mm output pieces/min: 35-50 Location: Germany

Condition: used, Year of construction: 1970, Functionality: fully functional, machine/vehicle number: M14L/8034, Offer Number: M14L/8034 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: HILGELAND Type: TR6V Constr. year: 1970 diameter range: 10-20 mm shaft length under head: 16-180 mm max. thread length: 105 mm output pieces/min: 100 Uuszvsrt3F Location: In our warehouse

Condition: used, Year of construction: 1970, Functionality: fully functional, machine/vehicle number: M14L/6907, Offer Number: M14L/6907 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: MALMEDIE Type: AG13 Cakdbrqpou Constr. year: 1970 diameter range: 8-16 mm shaft length under head: 150 mm max. thread length: 83 mm output pieces/min: 120 Location: In our warehouse

Condition: used, Year of construction: 1971, Functionality: fully functional, machine/vehicle number: M14L/8133, Offer Number: M14L/8133 Machinetype: thread rolling machine - flat die Info: tube feeder for studs and headless parts Make: PELTZER-EHLERS Type: NKW12-ST8 Constr. year: 1971 diameter range: 6-12mm shaft length under head: 95 mm max. thread length: 90 mm Bjzto70Sygx output pieces/min: 55 Location: In our warehouse

Condition: used, Year of construction: 1976, Functionality: fully functional, machine/vehicle number: M14L/8736, Offer Number: M14L/8736 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: HILGELAND / ZOM Type: TR4L Dofehl Constr. year: 1976 diameter range: 6-12 mm shaft length under head: 170 mm max. thread length: 102 mm output pieces/min: 125 Location: In our warehouse

Condition: used, Year of construction: 1983, Functionality: fully functional, machine/vehicle number: M14L/6106, Offer Number: M14L/6106 Machinetype: thread rolling machine - planetary die Bjztrxhtpxv Make: SIMA Type: RAP11 Constr. year: 1983 diameter range: 6-12 mm shaft length under head: 8-75 mm max. thread length: 75 mm output pieces/min: 1000 Location: In our warehouse

Condition: used, Year of construction: 1987, Functionality: fully functional, machine/vehicle number: M14L/8196, Offer Number: M14L/8196 Machinetype: thread rolling machine - flat die Make: SASPI Fzgzz80 Type: GV3-20 Constr. year: 1987 diameter range: 4-12 mm shaft length under head: 150 mm max. thread length: 130 mm output pieces/min: 85-220 Location: In our warehouse

Condition: used, Year of construction: 2002, Functionality: fully functional, machine/vehicle number: M14L/8831, Offer Number: M14L/8831 Machinetype: thread rolling machine - flat die Make: HILGELAND Type: FN10/12 - 80 U8Dgwjh2 Constr. year: 2002 diameter range: 6-12 mm shaft length under head: 180 mm max. thread length: 80 mm output pieces/min: 100-330 Location: In our warehouse