Used Clean Pool for sale (6,767)

Condition: used, TECHNICAL DETAILS - Flow : 765 [m3/h] - Output : ø 150 [mm] Floor space - Dimensions (length-depth-height) : 500 x 500 x 1800 [mm] - Weight : 85 [Kg] - Support : 500 x 450 x 770 [mm] Power supply - Voltage : 400 [V] Prodpfx Ajuhb Ibokijc - Nominal current : 0.1 [A]

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CLEANROOM - ISO 8 | Cleanroom requirements ISO Class 8 | ISO Cleanroom Class 8 | Cleanroom classification. In order to achieve an ISO 8 air purity class in a Cleanroom, several levels of air filtration are usually used (e.g. G4 pre-filter, F9 filter, H13 final filter). Air movement in the room is non-unidirectional (there is a mixing of "clean" air supplied to the room with "dirty" air present in the room). Air vents in the ISO 8 room are placed on the walls. The required number of air exchanges per hour will depend on the nature of the activities conducted in the room and the number of personnel present, but the goal could be to provide 10-40 air exchanges/hr. In ISO Class 8, personnel are often present continuously. Employees may be dressed in standard work attire and visitors in a disposable apron. It is recommended to maintain a minimum overpressure of the room relative to the adjacent zone of 5-10 Pa. Requirements for equipment and materials intended for Clean Room with ISO air cleanliness class 8 (maximum average amount of particles released when: number of samples taken = 100; measurement performed in accordance with ISO 14644-14 in a cleanliness class at least one better than the purpose of the device; number of particles/m3) Detailed description in photos. Technical drawings attached to photos. Description of ventilation The purpose of the ventilation installation performed was to achieve the following air parameters in the Clean Room. The installation was made with the GBD PHARMA 2000 system, meeting all the requirements for 'clean rooms' in the highest classes of air purity. Predoq H H Ruopfx Akijc Parameters for the installation: a. Air purity - ISO 8. b. Temperature 19-23 st C c. Humidity max 38%. a. To ensure the required purity of the supplied air, an air handling unit manufactured by DOSPEL with a maximum capacity of V= 3500 m3/h [up to 15 air changes per hour] was used. The air handling unit is equipped with pocket filters : pre-filters FK EU5/EC2 and fine filters FK-EU9/EC2. In addition, HEPA 11 filters made by EUFILTER were used in diffusers located in the ceiling. Data sheets in point H6. As a result , with a measured flow rate of 3264 m3/h, an ISO 7 [class "C"] cleanliness class of the room was obtained in the resting state, and thus an ISO 8 [class "D" ] cleanliness class for the working state. b. The temperature range of 19-23 deg C is for the enlarged cooler and chiller to be freely maintained with 25% fresh air. c. In order to achieve in summer conditions with high temperatures of 30 deg C and humidity of 80%, a freon chiller of 31.4 kW and a chiller of 33.5 kW of cooling power were used. The chiller is made by FUJITSU supplied by Klimatherm Gdansk. The room is automatically regulated overpressure in relation to the external pressure - the pressure difference at the door : 15 Pa The automation of ventilation allows for "economical" mode , in which the installation works in a closed circuit and an overpressure of 15 Pa is maintained. Technical data attached to the photos.

Condition: new, Year of construction: 2024, functionality: fully functional, operating pressure: 6 bar, total height: 1,270 mm, total width: 1,500 mm, pressure: 6 bar, type of input current: AC, empty load weight: 300 kg, input voltage: 230 V, heating capacity: 9 kW (12.24 HP), water tank capacity: 300 l, rotary table diameter: 1,000 mm, table load: 300 kg, table width: 1,000 mm, The ROT1000 rotary basket washer is a combination of modern technology and precision workmanship at every stage of the washer's development - this is, in short, the definition of an innovative design that will facilitate the process of washing large-size parts. The rich equipment of the device will provide us with high efficiency, economy and reliability at the workplace. A motor-driven rotary basket and spray nozzles increase the efficiency of the washing process. Parts undergoing the process are placed on a circular basket that rotates around its own vertical axis. The fully automatic control panel controls the work of the washer. STANDARD EQUIPMENT OF THE WASHER: - Sensor for disconnection of the closing lid when opening it during the washing process, Pjdsq I N S Hopfx Akiorc - Liquid level sensor in the tank, protecting against dry operation, - Liquid temperature sensor, - One adjustable, stainless steel spray arm from the renowned spraying company System - Mechanically rotating basket, - Dual filtration, - Coarse insoluble impurities filter (1mm mesh filter), - Drain valve

Year of construction: 2018, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: M iClean HM mit GIO, Our 10 Meiko pot washers with the model designation DV 80.2 PW and built in 2015 2016 are for sale. Condition good, ran partly with soft water. These machines are former leasing devices. With 6 months spare parts guarantee. Preventive maintenance was always carried out with the replacement of some wearing parts. Inspection and test run on site possible and desired. Technical specifications: Performance up to 60/40/17 baskets (corresponds to approx. 1080/720/306 plates or e.g. 2160/1440/612 glasses) per hour Program run times: 60/90/210 seconds Basket dimensions in mm: 500 x 500 Insertion height: 440 mm Tank capacity: 22 l Water consumption per basket: 2.6 l Tank heater: 1.3 kW Boiler: 7.5 kW (cold water) Boiler: 9.0 kW (hot water) Material: stainless steel Connected load: 400 V / 11.2 kW (cold), 9.7 (warm) Dimensions: W 635 x D 750 x H 1470/2050 mm Prsdjpy Dxropfx Akiec Electrical installation: Electrical connection: three-phase current 3 NPE, 400 V, 50 Hz. The circuit corresponds to the regulations of the VDE Water installation: The dishwashers can be connected to the fresh water network without the interposition of safety fittings. Minimum flow pressure 0.6 bar, maximum pressure 5 bar. The installation regulation EN 1717 must be observed. expiry ¾ ̋. On-site wall drain max. 700 mm high. Length of the connection lines approx. 1.8 m from the dishwasher. Collection of the machines desired. Dispatch by freight forwarder at cost assumption possible.

Condition: good (used), Year of construction: 1997, Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuums, floor vacuums, safety industrial vacuums Predporanncefx Akisc -Manufacturer: Debus, industrial vacuum cleaner type DDS 605 7 31 M -Operating pressure: 6 bar -Air requirement: 2.6 m³/h -Intake capacity: 7.8 m³/h -Dust container: Volume approx. 110 liters -Total container dimensions: Ø 640 x 730 mm -Dimensions of unit: 1330/620/H1360 mm Total weight: 153 kg

Condition: new, The POSEIDON-1000 cleaning machine is designed to diagnose, wash, and dry DPF filters and catalytic converters of various designs, meeting EURO 5 and EURO 6 standards. The machine offers gentle and effective cleaning through a washing method that achieves excellent results without damaging the expensive filters. The stand operates based on hydro-impact and turbulent fluid movement, using special washing solutions and temperature regimes for effective cleaning. After cleaning, the filter's operating properties are restored by 97%. KEY FEATURES - Testing of the filter before washing to assess the degree of clogging and after washing to check the quality of the cleaning. - Automated washing cycle with the possibility of programming all operating modes. Filter cleaning is hydrodynamic, with hydraulic and pneumatic systems operating in specific modes to generate hydraulic impulses for the removal of contaminants. - Accelerated drying of the filter by means of a powerful hot air blower, which allows the complete removal of residual moisture from the product. >> This allows the entire cleaning cycle to be completed in a short time, >> and return to the customer a clean and dry filter ready to be fitted to the vehicle. Perspective business with POSEIDON-1000 • The equipment and technology allow to perform high quality cleaning of DPF particulate filters of all types and brands of cars. • The most functional stand among foreign analogues, thanks to which it has high productivity. • Automated operation and control of the process of cleaning and drying the filter allows the stand to be operated by one person. • Minimal resources and time required to open your own service for cleaning particulate filters with our equipment. • Maximum quick payback of the equipment if you own a service for the repair of automotive units. YOUR BENEFITS + Automated process of DPF filter cleaning with the possibility of programming all the machine's operating modes, gives you the opportunity to independently adjust the washing mode to increase the efficiency of the processes or to work with the modes set by the manufacturer. + Full control of the filter cleaning and drying process is guaranteed by the presence in the standard programme of graphs displaying air or water pressure values in real time. + The filter condition diagnostic function with report printing allows the creation of reports before cleaning (to check the degree of contamination) and after cleaning (to check the quality of the operation performed). + The working surfaces and the body of the stand are not subject to corrosion as they are made of stainless steel sheet material. + The hermetic chamber not only limits the spillage of technical fluids, but also reduces the noise level to acceptable levels, making work on the stand more comfortable and safer. + Quick installation of the DPF filter is possible thanks to a separate pneumatic system for the connection of a universal quick-fit adapter. + The universal tool allows the installation of any DPF filter, regardless of the vehicle type. + Closed-loop fluid filtration is achieved with coarse and fine filters. The filters are equipped with pressure gauges that allow the degree of contamination to be determined. + Rationally selected water tank volume allows to provide short fluid warm-up time, long time between fluid changes. Pedspbv Hgopfx Akierc Please contact us to get the best offer!

Condition: used, Year of construction: 2020, machine/vehicle number: 525, powerful vacuum cleaner for dusts, smoke, chips Psdpfx Akep Sczbsierc suction power 7.58 m³ / min vacuum 520 mbar air demand 3.25 m³ / min suction nozzle NW 76 mm suction hose 5.5 m collection container 60 litres HEPA safety filter cartridge 2.2 m² - dust class H space requirements length - 1,100 x width - 680 x height - 2,200 mm weight approx. 130 kg

Year of construction: 2020, condition: new, Type LBM250C Motors 2 x 0.75kW Working length 1300 mm Working thickness 80 mm Transport dimensions 2400x600x1300 mm Prsdpfx Aefcg Epskiec Weight 340 kg

Year of construction: 2023, condition: new, INTERSONIK MIDISONIK series provides fast, reliable and economic solution in parts washing! Intersonik ultrasonic cleaners are perfect parts washing systems for degreasing and precise cleaning. Operation Principles: High frequency (25 kHz) which is obtained in liquid, creates millions of microscobic air bubbles loaded with vacuum energy, strike to dirty surfaces and explode and so oil, chip, carbon, lime, blood tissue are removed. Prodpfxed I Dpde Akisc Midisonik ultrasonic washers are available in 4 different size, 40l , 50l , 60l and 80 liter versions. Midisonik’s Standarts: - Machine is produced completely in stainless stell - Timer is mechanical or digital [optional] - Operation temperature is controlled by mechanical or digital thermostat (optional) Application Areas: ► Automotive spare parts cleaning like injector elements, pump’s elements, spark plug etc. ► At hospitals, clinics, laboratories, medical materials and surcigal instruments. ► Dentist’s instruments. ► Jewellery products. ► Electronic components and PCB cards. ► Textile industry equipments. Please check technical spesifications in the attached document. ultrasonic cleaner, ultrasonic washing machine, 40 liter ultrasonic cleaener, 50 liter ultrasonic cleaener, 60 liter ultrasonic cleaener, 80 liter ultrasonic cleaener, ultrasonic cleaner for automotive, ultrasonic degreaser Please feel free to contact with us for further details.

Condition: new, Year of construction: 2025, * Now available: Bobcat 200 sand cleaner (attachment only) – Top-of-the-line equipment. We are pleased to offer you the Bobcat 200 sand cleaner with excellent special equipment. * Condition: New * Availability: Immediately in stock. Why Zirndorfer-Maschinenpark? * Official authorized dealer for Bobcat & Montabert * Family-owned business with over 45 years of experience * In-house workshop for guaranteed quality * Large selection of new and used machines Financing, leasing, or hire purchase? No problem – we will find the right solution for you through our partner banks. Would you like to trade in your used machine? We will gladly take your machine in part exchange at fair conditions. Attachments and accessories? We will gladly offer additional attachments and matching accessories upon request. Sales to EU or non-EU countries? We will handle the process for you. – Special equipment of the machine – Standard equipment of the machine: Double-acting auxiliary hydraulics * CE certification Prodpfez Ric Sex Akijc Trust in experience in the third generation. Zirndorfer-Maschinenpark e.?K. – Your partner for construction machinery. Contact us now and secure your individual offer. – Legal note: The information provided on the internet is a non-binding description. It does not constitute guaranteed characteristics. The seller is not liable for errors, input errors, or data transmission errors. Subject to change.

Condition: refurbished (used), Dry cleaner/ Friction cleaner Prodpsz Hxpxjfx Akiec with 110 kW drive power. Throughput max. 4t/h depending on type of plastic and material thickness

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, RUWAC – Wet and dry vacuum cleaner Prsdpfx Aozphbrokioc - CE marking - Year of manufacture: 2023 - Includes hose and nozzles - Fully functional Dimensions: L x W x H: 1.2 x 0.6 x 1.4 meters / Weight: 120 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 2012, machine/vehicle number: 22781, Offer 26198 Industrial vacuum cleaner for blasting grit - Gray cast iron Prsdsz Hl A Sopfx Akijc Technical data: - Industrial vacuum cleaner for blasting grit – Gray cast iron - Sand - Mobile design - Airflow rate 360 m³/h - Pressure -140 / +130 mbar - Bag filter 1.75 m² - Vibrating motor for filter cleaning - Tank volume 50 L - Drive - Fan 220 V / 2 kW - Space requirement approx. W 780 x H 1400 x D 900 mm - Weight approx. 170 kg

Condition: ready for operation (used), functionality: fully functional, Industrial vacuum cleaner RINGLER RA 220 -Type RA 220 - D 2x2.2 -Power approx. 4 kW -Speed 2850 rpm -Large industrial collection/filter container -High-performance extraction unit -Electrical control with control panel -Industrial suction hose -Floor suction nozzle Dimensions: L x W x H 1.8 x 0.7 x 1.8 meters / Weight approx. 250 kg Errors and omissions excepted. Podpfx Akjzy Hfdeierc

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, total length: 1,000 mm, high-pressure hose length: 10,000 mm, total height: 950 mm, total width: 800 mm, pressure: 320 bar, fuel: regular/benzine 91, overall weight: 150 kg, fuel tank capacity: 21 l, High-pressure cleaner, 25 hp, CLENA BMK, 21 l/min, 320 bar Pjdpsz Hybijfx Akierc Discontinued model – available at a reduced price! Includes accessories: - 10 m high-pressure hose, DN10, with kink protection on both ends - High-pressure gun HDP350 - Double spray lance including high-pressure nozzle

Condition: as good as new (ex-display), Year of construction: 2026, The CE08 series is an electrically powered high-pressure cleaner. This model is the ideal tool for general cleaning tasks. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotary nozzles, chemical injectors, and a sandblasting kit. It is similar to, but not a Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE08-series L/min CE08-200 bar 15 7.5 hp water blaster unit 50Hz CE08-200 bar 15 7.5 hp water blaster unit 60Hz CE08-200 bar 15 7.5 hp water blaster unit 50Hz with start/stop CE08-200 bar 15 7.5 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor power: 6.0 kW Volt: 400V (50Hz) - 440V (60Hz) Prsdpfjhf Naksx Akioc Amp: 12.8A (50Hz) - 12.3A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.

Condition: used, KEG system, manufacturer: M+F, type: Micromat M 2/2, with 1 internal cleaning station and 1 filling station, equipped with detergent tank Psdpfoyzhvisx Akiorc

Condition: used, Year of construction: 2019, functionality: fully functional, total width: 582 mm, total length: 1,315 mm, total height: 2,010 mm, input frequency: 230 Hz, 2 used Christ vacuum cleaners. Coin-operated. In good condition. Pedpfjzi Syfox Akisrc

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, operating pressure: 500 bar, total length: 860 mm, high-pressure hose length: 10,000 mm, total height: 1,100 mm, total width: 600 mm, pressure: 500 bar, type of input current: three-phase, empty load weight: 150 kg, input voltage: 400 V, fuel: electricity, overall weight: 150 kg, warranty duration: 12 months, power: 15 kW (20.39 HP), input current: 63 A, Equipment: chassis, Designed for professional use in industry, the CLENA H series is available in a variety of pressure and flow combinations, up to 500 bar and 21 l/min. This allows for precise adaptation to every customer requirement. These machines are designed for continuous operation in demanding cleaning tasks where no compromises can be made. Includes accessories: - 10 m high-pressure hose DN10, with kink protection on both sides - HP500 Soft CL high-pressure gun with swivel joint at the inlet - CL spray lance with nozzle protection, including high-pressure nozzle Dimensions: 860 x 600 x 1100 Weight: 150 Available models: H9318 | 350 bar | 18 l/min | 11.0 kW H9330 | 200 bar | 30 l/min | 11.0 kW H9335 | 170 bar | 35 l/min | 11.0 kW H9340 | 150 bar | 40 l/min | 11.0 kW H9415 | 500 bar | 15 l/min | 15.0 kW H9418 | 400 bar | 18 l/min | 15.0 kW H9421 | 350 bar | 21 l/min | 15.0 kW H9425 | 300 bar | 25 l/min | 15.0 kW H9430 | 250 bar | 30 l/min | 15.0 kW H9435 | 225 bar | 35 l/min | 15.0 kW H9440 | 200 bar | 40 l/min | 15.0 kW H9450 | 170 bar | 50 l/min | 15.0 kW H9521 | 500 bar | 21 l/min | 18.5 kW Pedpfx Akezd Tuyjisrc H9560 | 170 bar | 60 l/min | 18.5 kW Similar to, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc.

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 6000 S PVC FULL CNC KÖŞE TEMİZLEME MAKİNESİ, • Automatically cleans the burrs formed on the inner-outer corners and upper-lower surfaces due to melting during the corner welding process of PVC profile frames, with high precision and speed • CNC control system (2 axes) • Automatic profile recognition feature • Remote installation and support • Can be connected to four-head welding machines without requiring revision • Operates with G Code • Processing capacity of 160-200 frames per 8-hour shift • Equipped with a total of 10 cleaning tools Prsdpforbg Euex Akiec • Cleaning of upper and lower surfaces for both white and colored profiles • Cleaning of upper and lower surfaces for coated profiles • Cleaning of inner and outer gasket grooves • Cleaning of both square and radius surfaces • Unlimited memory capacity and easy operation thanks to the 10" LCD HMI control panel • Long service life with automatic lubrication system (activated after every 60 frames) • Linear guide system • Unique software allows very simple operation and programming • Brushed support table system for easy rotation of profiles • Easy profile programming (handwheel) • Adjustable working speeds to desired levels

Condition: good (used), Year of construction: 2020, operating hours: 217 h, functionality: fully functional, machine/vehicle number: 62006078, operating pressure: 2,800 bar, total length: 4,670 mm, high-pressure hose length: 10,000 mm, total height: 2,540 mm, total width: 1,970 mm, pressure: 2,800 bar, empty load weight: 2,750 kg, fuel: diesel, overall weight: 2,750 kg, water tank capacity: 160 l, fuel tank capacity: 200 l, power: 160 kW (217.54 HP), volume flow: 1.62 m³/h, noise level: 111 dB, Equipment: crane, DYNAJET UHP 220 2800 | 2020 | Low Hours Podpfx Akoz D Ew Rsijrc This DYNAJET UHP 220 2800 from 2020 is available in excellent condition and has only 396 engine hours and 216 high-pressure hours, making it a highly attractive alternative to a new unit. Delivering up to 2,800 bar and 27 l/min, the UHP 220 is designed for the most demanding water jetting applications, including paint removal, rust removal, concrete rehabilitation, and industrial surface preparation. Powered by a reliable 220 HP Volvo industrial diesel engine, the machine combines exceptional performance with low operating costs and proven durability. The integrated DYNAJET Easy Control II system allows precise pressure adjustment and simple operation, while the twin-axle trailer ensures easy transport between job sites. With its low operating hours and robust DYNAJET construction, this machine is ready for immediate work and many years of productive service. Key Features and Advantages: *Model year 2020 *Only 396 engine hours *Only 216 high-pressure hours *Operating pressure up to 2,800 bar *Maximum flow rate 27 l/min *220 HP Volvo industrial diesel engine *DYNAJET Easy Control II with colour display *Low-speed high-pressure pump with carbide plungers *Large fuel tank for extended operation *Twin-axle trailer for easy transport *Ideal for paint removal, rust removal and concrete removal *Fully operational and ready for immediate use For pricing, availability, or further technical information, please contact us.

Condition: excellent (used), Year of construction: 2016, operating hours: 20 h, functionality: fully functional, high-pressure hose length: 20 mm, pressure: 90 bar, fuel: diesel, overall weight: 600 kg, water tank capacity: 1,000 l, temperature: 90 °C, MGC.pl, a company operating since 1995 with over 6,000 completed transactions, offers for sale a professional Heatweed HighSeries 75/30 machine from 2016, designed for weed removal using hot water and surface cleaning. The offered set includes two working nozzles and additional tanks. The model is designed for simultaneous operation by two operators, making it ideal for servicing larger areas, in service companies, municipal plants, and companies involved in green space maintenance. TWO APPLICATIONS IN ONE MACHINE Heatweed uses hot water for thermal weed control, without the use of herbicides. This solution is particularly useful for maintaining sidewalks, squares, parks, cemeteries, and areas around buildings. The device can also operate as a pressure washer for cleaning facades, benches, trash cans, monuments, tombstones, and other infrastructure elements. Pressure and temperature regulation allows the operation to be adapted to the task at hand. TECHNICAL DATA OF THE MODEL Manufacturer: Heatweed. Model: High 75/30 / HighSeries 75/30. Year of the offered unit: 2016. Engine: Kubota, diesel. Possibility of simultaneous operation by two operators. Declared weeding performance: 3750–7500 m² per day, depending on working conditions. Water flow during weed control: 30 l/min. Working pressure during weeding: 0.1 bar. Water temperature during weeding: 99°C at weed level. Automatic temperature control with display. Accuracy of temperature regulation according to the manufacturer: ±0.4°C. Pressure in cleaning mode: stepless regulation up to 90 bar. Water temperature in cleaning mode: adjustable up to 85°C. Number of burners: 2. Fuel tank capacity (engine): 40 l. Fuel tank capacity (burners): 80 l. Standard water tank capacity: 1000 l. Standard working hoses: 2 × 15 m. Two integrated automatic hose reels. Dimensions of the machine itself, length × width × height: 1351 × 1001 × 1314 mm. Machine weight according to the data sheet: 585 kg. Dosing pump for descaling agent. Operation without the need to connect an external generator. Design allowing loading and unloading with a forklift. EQUIPMENT OF THE OFFERED SET Two working nozzles. Additional tanks. Detailed number and capacity of tanks and the composition of accessories to be confirmed during inspection. APPLICATION Weed removal from sidewalks, squares, and pedestrian paths. Maintenance of parks, gardens, and green areas. Maintenance of areas around schools, kindergartens, and playgrounds. Psdpfxez H T A Tj Akisrc Work in cemeteries and municipal areas. Service for housing estates, industrial facilities, and company premises. Washing facades and elements of small architecture. Cleaning monuments, tombstones, benches, and trash cans. Professional equipment for a company that wants to expand its offer with hot water weeding and cleaning services. The possibility of operating two operators and the combination of two functions increase the range of applications for the device. The stated price is net and applies to export and for companies. A significant discount is possible for individual customers. We invite you to contact us directly by phone so that you can get your best price.

Condition: used, functionality: fully functional, Manufacturer: Ultrasonic Cleaner Model: JP-360ST Equipment type: Ultrasonic cleaner Ultrasonic frequency: 40 kHz Ultrasonic power: 1,800 W Ultrasonic generator supply voltage: 180–265 V Power supply: AC 380 V, 3-phase Tank capacity: 135 L Working tank dimensions: 50 × 60 × 45 cm Overall dimensions: 70 × 80 × 80 cm Drain valve: Ball valve, 1" Timer control: Automatic timer shut-off Functions Ultrasonic frequency: 40 kHz Ultrasonic power: 1,800 W Adjustable operating time Prjdpez H Rlrsfx Akijc Automatic shut-off at the end of the cycle 1" ball drain valve

Condition: used, Year of construction: 2006, operating hours: 4,803 h, functionality: fully functional, machine/vehicle number: WPUD500H062000449, operating pressure: 500 bar, total length: 3,650 mm, high-pressure hose length: 50,000 mm, total width: 2,080 mm, pressure: 500 bar, type of input current: DC, empty load weight: 1,620 kg, input voltage: 12 V, fuel: diesel, overall weight: 2,900 kg, water tank capacity: 1,000 l, fuel tank capacity: 50 l, power: 32 kW (43.51 HP), DGUV certified until: 09/2026, Dynajet 500TH 30 L/min Psdpez Egmcsfx Akijrc 500 bar 4800 operating hours Regularly maintained, recently serviced, not operated in winter (only April–October) New engine installed in September 2026, invoice available Imported to Sweden from Germany in 2021.

Year of construction: 2008, condition: used, functionality: fully functional, Industrial vacuum cleaner. Pjdjz Dp Igepfx Akierc