Used Chair Factory for sale (1,827)

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, 1 x Comas DP Depositor Type-800 8-lane (Serial no. 2614, Date of manufacture – 1997). Videos available on request. Gedpszcaz Eofx Ahmebr All equipment to be removed from the factory by the Buyer.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, REF: MM6450 Godpfezcb E Sex Ahmjbr 1 x Comas MUFFIN LINE 8-lane depositor. Type-IS 800. Serial no. 3505. Date of manufacture – 2003). All equipment to be removed from the factory by the Buyer.

Condition: used, REF: MM6452 3 x Baker Perkins travelling ovens with 15m long x 1580mm wide belt. NOTES: Gbjdpfx Ahozccfgemjr One of the ovens has a belt missing 12 x sections/lines. All equipment to be removed from the factory by the Buyer.

Condition: used, functionality: fully functional, mileage: 287,319 km, power: 331 kW (450.03 HP), first registration: 05/2024, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Gbjdpfsztm I Ejx Ahmer Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam Tyres Information Front left - 13 mm Front right - 13 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: as good as new (ex-display), Year of construction: 2018, The TAC CNX is a fully automatic machine that can cross cut straight or angled, coupled with a CNC vertical drilling unit and vertical hopper feed loading leading device. This means a combined operating cycle of feeding, drilling and cutting with no manual operator intervention. The TAC can also just be used for crosscutting if so required. The saw unit cutting angle automatically adjusts to the required angle from the program, while the drilling group is controlled in 3 axis with a 5 spindle point to point head. Programming is quick and simple thanks to the integrated colour graphic touch screen controller. The saw and drilling units are both located in an enclosed safety cabin with electrically interlocked doors, this giving the operator the highest level of protection. The machine is ideal for cutting and drilling for sofa / chair frame rails / parts, general furniture parts, plastics and / or aluminium extrusions. Specification - Heavy duty thick steel monobloc frame electro welded. - Automatic vertical loading system with length capacity upto 1350mm (longer on request). - Feeding via self centering grippers. - Special grippers to allow loading of / feeding of 2 pieces together (on top of each other). - Automatic step advancement movements of the material to be drilled / cut controlled by the NC on the X axis. Programmable movement from 1 to 1050mm, advancement speed max 60 mt/min (adjustable). Special 'macro' for back movement of the piece for material saving. Gbedev Aalyspfx Ahmer - Outfeed motorised exit conveyor belt for cut / drilled parts 600mm long x 75mm wide. - Saw unit with 4kw motor/ 2800mm adjustable through inverter up to 4000 rpm. Automatic rotation of the sawblade +/- 60 degrees controlled by the CN. - 5 spindle in line vertical point to point drilling unit controlled on 3 axis by CN. - Easy programming with dedicated software with 12" screen an operator interface - Total protection of the the working cabin, interlocked doors with inspection windows. - In conformity with CE safety rules. Working dimensions - Length feeding in one operation 1 to 1000mm (can be increased by setting more positioning steps of the loader. - Width 10 to 200mm cutting at 90 degrees. - Width 10 to 150mm cutting at 34 degrees. - Thickness 10 to 80mm. - Productivity approx 3 seconds per operation (feeding, drilling, cutting = 9 seconds) Complete with optional Vertical hopper feed loader with 3m length capacity Year - 2018 CE Condition - As new ex display [ only used for demonstrations.]

Condition: new, The Matrix Fast 500 is the latest in the Stromab range of automatic crosscutting machines, with a high speed upstroke saw action which depending on cutting paterns can give up to 40% more production than the standard machine. The machine is primarily designed for programmable and repetitive cutting from standard and / or random lengths of timber. The new high speed pneumatic saw unit with variable speed control, can also be set to limit the saw stroke when cutting smaller boards, helping to increase production even further. The pusher is fitted with a heavy duty rack and pinion drive feeding system, for fast and accurate positioning giving a high level of repeat cutting accuracy, the pusher is raised with a pneumatic cylinder forits return to its loading position, allowing the operator to prepare the next pack of timber on the table without having to wait for the pusher to return to its idle position. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while allowing the operator a clear view of the cutting area still gives complete protection. additional safety features include full length guarding of the rear of the pusher system, whilst there is a safety pull cord running along the length of the front infeed table. Programming and entering of cutting lists is simple with the on board Top 12 control unit. With a 12" colour touch screen display, offering a modern, robust and reliable control system with many innovative features and is ideally suited for a factory or workshop environment. As standard the machine now offers USB, ethernet and 3 levels of optimisation including "board sequence" ideal for repetitive cutting. The Matrix OPTI version offers an additional 3 optimisation criterias including "minimum waste" and automatic board length measuring suitable for random length boards. The Matrix DEFECT version offers all optimisation criterias, length measuring, a defect removal camera and timber grading. Additional options also include extended outfeed table, pneumatic side roller pressure, label and inkjet printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Specification Self braking motor 10hp Saw blade diameter 500mm Max cutting width 390mm ( refer to chart ) Max cutting height 150mm ( refer to chart ) Pusher unit 3000 to 15000mm Precision rack and pinion drive giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Positioning speed 100m/min Positioning accuracy + /- 0.2mm Elco TOP 12 control unit Godpeb Tmwasfx Ahmsbr Touch screen with 12" colour display 1m outfeed table Dust outlets 2 x 100mm diameter

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, High speed Flow wrapping machine direct from closed Scotch Egg factory, commonly used for wrapping pies, Scotch Eggs and other bakery products. Rare to find a recent manufactured machine, this is the newest one we have seen. Gbodpezmy Avjfx Ahmor

Condition: good (used), Direct from closed food factory - was used for frying Scotch Eggs. Dimensions to follow. Machine looks identical to Heat and Control HeatWave fryer so we think it was maybe manufactured under licence from Heat and Control. It can be supplied as a system comprising of a large double oil tank system for fresh and dirty oil and a Berief Drum Pre Filter. There is no top hold down belt on this machine. Gbedpozmy Aisfx Ahmor

Condition: used, functionality: fully functional, mileage: 263,514 km, power: 331 kW (450.03 HP), first registration: 05/2024, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Gbsdpfszr Uzdex Ahmer Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam Tyres Information Front left - 13 mm Front right - 14 mm Rear left inner - 9 mm Rear left outer - 9 mm Rear right inner - 9 mm Rear right outer - 9 mm

Condition: new, functionality: fully functional, Year of construction: 2026, Hydraulic two-roller bending machine Guaranteed capacities: Sheet thickness Bending with material 260 N/mm² Yield point: 2 mm Sheet thickness bending with material AISI 304-316 stainless steel: 1.5 mm Cycle time per part: 15 seconds Technical specifications: Working length: 1000 mm Installed power: 5.5 kW Rolling speed: 7 m/min immediately available from the factory! Gbsdpsc S N Risfx Ahmsr

Condition: excellent (used), Year of construction: 2010, operating hours: 32,300 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 11 kVA, controller manufacturer: Hurco, controller model: WINMAX, workpiece weight (max.): 340 kg, table width: 356 mm, table length: 762 mm, table load: 340 kg, overall weight: 2,900 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 32,300 h, spindle motor power: 11,000 W, spindle nose: CAT 40, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, 2010 Hurco VM10 CNC Milling Machine with CAT 40 Spindle, WINMAX Control 2010 Hurco VM10 Vertical Machining Centre with WINMAX CNC Control, CAT 40 spindle, 20-tool ATC and premium software package. Good condition. Delivery throughout Ireland, UK & Europe. Manufacturer: Hurco Model: VM10 Machine Type: 3 Axis Vertical Machining Centre Year: 2010 Hours: 32,300hrs Control: WINMAX Condition: Excellent For sale is a 2010 Hurco VM10 Vertical Machining Centre in good working condition, equipped with the renowned Hurco WINMAX CNC Control (Version V08.01.04.33) and a CAT 40 10,000rpm spindle. The Hurco VM10 is recognised worldwide as one of the most reliable and user-friendly vertical machining centres for precision CNC milling, toolroom machining, prototype manufacture, small batch production, mould making, and general engineering. With 32,300 machine hours, this machine remains an excellent opportunity for engineering companies looking for an affordable, high-quality used CNC machining centre from one of the industry's most respected manufacturers. Please note: No tooling is included with the machine. Technical Specifications Manufacturer: Hurco Model: VM10 Year: 2010 Machine Type: Vertical Machining Centre CNC Control: Hurco WINMAX Mill V08.01.04.33 Machine Hours: 32,300 Hours X Axis Travel: 660 mm Y Axis Travel: 406 mm Z Axis Travel: 508 mm Table Size: 762 × 356 mm Maximum Table Load: 340 kg Spindle Taper: CAT 40 Spindle Speed: 10,000 RPM Spindle Motor: 11 kW (15 HP Peak) Automatic Tool Changer: 20 Station ATC Rapid Traverse (X/Y/Z): 24 m/min Gedpfx Ahsziu Hzjmjbr Machine Weight Approx.: 2,900 kg Condition: Excellent Working Condition Tooling: No Tooling Included Installed WINMAX Software Options This machine is equipped with an excellent range of factory software options including: Advanced Verification Graphics DXF File Import NC Productivity Package Industry Standard NC Programming UltiPockets Rigid Tapping Helical Ramp Milling 3D Mold Package NC Conversational Merge Swept Surface Machining Select Surface Finish Quality These options significantly enhance programming flexibility, machining accuracy and production efficiency, making the VM10 suitable for both conversational programming and full ISO/G-Code machining. Notes: *Specifications are given in good faith but not guaranteed* Key Features Hurco WINMAX Conversational CNC One of the easiest CNC controls to learn and operate, allowing operators to quickly produce components without extensive G-Code programming. CAT 40 High-Speed Spindle The industry-standard CAT 40 spindle provides excellent tooling availability and rigidity for machining steel, aluminium, plastics, composites and engineering materials. 20 Station Automatic Tool Changer Fast automatic tool changes reduce machining time and improve production efficiency. Compact High-Performance Design Large machining travels combined with a compact footprint make the VM10 ideal for workshops where floor space is at a premium. High-Speed Precision Machining The 10,000 RPM spindle combined with rapid traverse rates enables efficient production while maintaining excellent surface finishes. Proven Hurco Reliability Hurco machining centres are recognised worldwide for their durability, ease of maintenance and excellent resale value. Machine Condition: Excellent Condition Fully operational Ready for immediate production No tooling included in sale Inspection welcome

Condition: like new (used), Year of construction: 2021, machine/vehicle number: B440, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, rotational speed (max.): 300 rpm, rotational speed (min.): 60 rpm, Equipment: CE marking, rotational speed infinitely variable, OMAC B440 3600 VX Hygienic Rotary Lobe Pump Unit – Fully ATEX Rated – 2021 Complete hygienic rotary lobe positive displacement pump unit by O.M.A.C. S.r.l. (Italy), professionally decommissioned from an INEOS manufacturing facility. Fully matched ATEX drivetrain — pump, gearbox and motor all Category 2G (Zone 1) rated, suitable for installation in hazardous area environments. Suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Ready to install. Pump: Manufacturer: O.M.A.C. S.r.l., Italy Model: B440 3600 VX Year: 2021 Wetted parts: AISI 316L stainless steel Connections: 4" (DN100) hygienic tri-clamp ATEX: II 2G Ex h T4 Gb Gearbox: Motovario HR 101M helical reducer Ratio: i = 4.88 Torque: 530 Nm ATEX dual-rated Motor: Gbedpfjzmgdasx Ahmer Cemp E3AB70 132M-4 — 7.5 kW 400V Δ / 690V Y, 1462 rpm ATEX: Ex db IIB T4 Gb IP55, IE3 efficiency Inverter-rated (S9 variable speed duty, PTC 120°C thermal protection) Pump shaft speed approx. 300 rpm at 50Hz (approx. 60–300 rpm range on inverter) Complete unit mounted on a stainless steel baseplate with forklift access. 3 identical units available — matched factory batch with consecutive serial numbers across pump, gearbox and motor. Price is per unit. Condition: New other. Excellent, clean condition throughout — see photos. Inspection welcome prior to purchase. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: new, fuel type: diesel, overall weight: 1,600 kg, empty load weight: 1,600 kg, Year of construction: 2024, GÜNTER GROSSMANN GG1600 MINI EXCAVATOR, 3-cylinder KUBOTA Günter Grossmann GG1600 Kubota Thanks to close collaboration between Günter Grossmann and Kubota, the new GG1600 excavator has been created. Track excavator Günter Grossmann GG1600. Mini excavator on tracks GG1600, KUBOTA engine, KDK hydraulic pump, VS EATON compressor motor. Very good quality. Standard equipment Excavation bucket 400mm Additional accessories for the machine can be purchased. Model GG1600 is a great machine for the most demanding construction, electrical, and hydraulic companies. We guarantee after-sales service. The excavator is manufactured based on solid European technology. SPECIFICATIONS Model: GG1600Y Brand: Günter Grossmann Weight: 1600kg Bucket capacity: 0.045 m³ / 200kg Engine: KUBOTA Engine power: 15 kw/2300r/min Main pump: Japan – KDK Japan Swing motor: American – EATON USA Travel motor: Korea – KOREA DONGHYUN WORKING RANGE Max. digging depth: 1650 mm Max. vertical digging depth: 1650 mm Max. digging height: 2610 mm Rotation radius: 360° Optional accessories available for order: Ground drill Gsdpfeggai Ujx Ahmebr Grab Digging tooth Rake Narrow bucket 200 mm Narrow bucket 380 mm Leveling bucket 500mm Leveling bucket 800mm Quick coupler Breaker hammer GG1600 €13,400 excluding VAT GG800 Bn83wivh €5,900.00 including VAT €7,139.00 including VAT GG1000 €9,909.00 including VAT €8,190.00 excluding VAT transport costs on request We deliver to companies and private individuals in the Netherlands and Belgium! With each delivery, you will receive a VAT invoice and (factory) warranty. -Click on 'email this advertiser' and provide your contact details, and we will send you the webshop details. -tel (7 days a week from 8:00 to 23:00) -Collection is possible by appointment, also in the evening and on weekends. Easy payment... -via our webshop -Cash or card payment upon collection/delivery -Via iDeal (request a link via email) For GG 800 details, see our other advertisement. For more information, please call or email us. Lease negotiable.

Condition: used, mileage: 350,000 km, power: 355 kW (482.67 HP), first registration: 05/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total length: 10,920 mm, total width: 2,550 mm, total height: 3,700 mm, loading space length: 7,000 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Year of construction: 2019, Equipment: ABS, air conditioning, compressor, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Buy online. Finance digitally. Have it delivered nationwide. ----Chat now via WhatsApp: Get in touch quickly and easily with our sales consultant. Internal ID number: [260279]---- Your advantages with us: * Digital consultation via telephone or WhatsApp * Financing options, even without a down payment * Trade-in of your vehicle, whether old or new Optional extras: * 12-60 month used car warranty (valid throughout the EU) * New inspection * New TÜV (German technical inspection) & emissions test * Nationwide delivery---- For sale: a very well-equipped DAF XF 480 FAN with 6x2 drive, Atlas core dump body, and ATLAS loading crane. The vehicle is ideally suited for the transport and loading/unloading of construction materials, containers, pallets, and heavy materials. With its 7,000 mm long steel dump body, the powerful ATLAS loading crane, and the fully air-suspended chassis, the DAF can be used in a variety of ways in the construction materials trade, construction industry, and transport sector. Vehicle data: * DAF XF 480 FAN * First registration: 09.05.2019 * Mileage: approx. 356,619 km * Engine power: 353 kW / 480 hp * Engine displacement: 12,902 cm³ * Emission standard: Euro 6 * Automatic transmission * Axle configuration: 6x2 * 3 axles * Sleeper cab * 2 seats * 2 vehicle keys * German vehicle ---- Optionally available: Schwarzmüller AZ T02A construction materials trailer, 18t / 2-axle / air suspension (EUR 14,490 net)---- ATLAS loading crane: * ATLAS 186.3V-A12K * Approx. 18.6 mt lifting capacity * Hydraulically extendable in 3 stages * Hydraulic outriggers * Elevated control station with ATLAS high seat * Direct hydraulic crane control * Good all-round visibility from the control station * Crane hook attachment Body: * Atlas core steel dump body * Approx. 7,000 mm dump body length * Non-slip steel floor * Body according to EN 12642-XL * High aluminum side walls * Side walls with anti-slip coating * Versatile for use with construction materials, containers, pallets, and machinery Equipment: * Fully air-suspended chassis * ECAS remote control * LED low beam headlight (factory installed) * Strands LED light bar * Reversing camera * Auxiliary heater * Cooler box * JVC multimedia radio * Air-suspended driver's seat * Sleeper cab * 544-liter diesel tank * SP inspection available ---- Would you like to lease or finance? We offer attractive deals – even without a down payment! Feel free to contact us. Gbsdpfxeztiire Ahmsr Contact: Phone: WhatsApp: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon-Fri: 9:00 a.m. – 6:00 p.m. Sat: 9:00 a.m. – 2:00 p.m. All information on the internet is non-binding and serves only as a general description of the vehicle. Errors, typos, and prior sale are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances.

Condition: good (used), Year of construction: 2017, FOR SALE: Complete Industrial Compressed Air System / Unit – KAESER For sale, a complete, high-performance compressed air system from the KAESER brand, ideal for workshops, factories, or demanding industrial applications. High-quality German equipment, reliable, and well-maintained. DETAILS OF THE EQUIPMENT (3 MAIN UNITS): Gbsdpfx Ahozqtdzomer 1. Screw compressor with variable speed drive – KAESER CSDX 165 SFC Brand / Model: Kaeser CSDX 165 SFC (Sigma Profile) Year of manufacture: 2017 Rated power: 90.0 kW Maximum operating pressure: 8.5 bar Motor speed: 2980 rpm Series / Article number: 3111 / CSDX.4 Specific feature: Equipped with a variable speed drive (SFC) for optimized energy consumption management based on air demand. 2. Refrigerant air dryer – KAESER TF 280 Brand / Model: Kaeser TF 280 Year of manufacture: 06 / 2017 Maximum operating pressure: 16.0 bar Electrical supply: 400V / 3 Ph / 50Hz (Rated current: 9.6 A) Refrigerant: R-134a (2.60 kg) Serial number: 1631 / Material: 1.2482.0 3. Fixed-speed screw compressor – KAESER CSD 102 T Brand / Model: Kaeser CSD 102 T Integrated equipment: Integrated air dryer module (T version) and SIGMA CONTROL electronic control. Usage: Ideal as a main compressor or as a backup to ensure a secure air supply. ADDITIONAL INFORMATION Overall condition: Good visual and functional condition, always maintained in a production setting. Availability: Immediate. Terms: Collection on-site, the responsibility of the buyer (suitable handling equipment should be provided).

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 745 h, load capacity: 1,200 kg, lifting height: 4,150 mm, free lift: 1,464 mm, fuel type: electric, mast type: triplex, construction height: 2,004 mm, fork length: 1,150 mm, empty load weight: 907 kg, total length: 756 mm, drive type: Elektro, construction width: 770 mm, High-lift stacker Load center: 600 mm Mast type: Triplex Technical condition: very good Front tyres type: Polyurethane Gsdpfx Aoy Et Urshmjbr Front tyres condition: 100% Rear tyres type: Polyurethane Rear tyres condition: 100% Battery voltage: 24V Battery capacity: 225Ah Battery year: 2026 Description: Factory-refurbished used machine by Toyota, including new inspection and new approval according to FEM (formerly UVV). Pulse control, full free lift, CE certificate.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. The machine was meticulously maintained by the previous owner. It was sold due to a factory closure Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Gbedpfjzr D Tcjx Ahmer Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Condition: used, Meat Flattener Henneken HP 415 The Henneken HP 415 is an industrial meat flattener designed for professional meat processing and food production. It is suitable for flattening, tenderizing, and leveling chicken fillets, schnitzels, turkey fillets, döner, pork, and beef. The HP 415 ensures a uniform thickness of meat, poultry, fish, and other food products, resulting in consistent cooking times, shorter frying times, and optimal preparation for breading, coating, filling, or further processing. Thanks to its efficient pressure rollers and flattening belts, products such as schnitzels, steaks, beef roulades, Cordon Bleu, tenderloin, gyros, döner kebab, and other meat and poultry products can be flattened quickly and evenly. The Henneken HP 415 features a 415 mm belt width and continuously adjustable belt speed. It is ideal for the meat processing industry, poultry processing, catering, foodservice, and convenience food production. The machine is widely used in slaughterhouses, snack food factories, industrial kitchens, and food processing lines. The machine is hygienic, easy to maintain, and suitable for continuous production. Gbedpfxoztpd Ao Ahmjr - Belt width: 415 mm - Continuously adjustable belt speed: 2.5–15 m/min - Adjustable product height: 6–130 mm - Infeed height: 770 mm - Outfeed height: 750 mm - Voltage: 400 V (3 + N, 50 Hz) - Power: 1.1 kW - Weight: 332 kg - Year of manufacture: 2019 - Dimensions (W x D x H): 2130 x 830 x 1230 mm

Condition: new, mileage: 3 km, power: 330 kW (448.67 HP), fuel type: diesel, tire size: 315/80 R 22.5, axle configuration: 4x2, wheelbase: 39,000 mm, fuel: diesel, fuel tank capacity: 960 l, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro3, suspension: steel, Year of construction: 2025, Equipment: ABS, air conditioning, cruise control, electric window regulation, power assisted steering, - 2 fuel tanks - Autoradio - CD - Power windows front - PTO - Sun visor - Tool box - Transportation - Twin wheels - Xenon headlights WHEN EVERY DELIVERY MATTERS In transport, reliability isn't a luxury—it's the foundation of your business. Whether you're operating fuel tankers, bulk trailers, container chassis or general freight, every successful delivery depends on equipment that performs day after day. The Mercedes-Benz Actros 2045 S 4x2 has been engineered to deliver exactly that, combining proven Mercedes-Benz reliability, excellent fuel efficiency and a specification developed for demanding international transport operations. WHY CHOOSE THIS ACTROS 2045 S? ✔ Mercedes-Benz Actros 2045S 4x2 Tractor Head ✔ Mercedes-Benz OM460 12.8L EURO III Engine ✔ 449 HP | 2,200 Nm Torque ✔ Mercedes PowerShift 3 Automatic Transmission ✔ PowerShift Advanced ✔ Efficient 4x2 Drivetrain ✔ Grounder Off-Road Specification ✔ N3G Off-Road Vehicle Classification ✔ Factory JOST 3.5" Fifth Wheel ✔ Factory PTO for Hydraulic Applications ✔ Dual 480L Aluminium Fuel Tanks (960L) ✔ Ready for Immediate Worldwide Export Built for Transport Professionals Transport companies don't measure success by horsepower alone. They measure it by vehicles that arrive on time, minimise downtime and continue performing year after year. That's exactly what the Mercedes-Benz Actros 2045 S has been developed to achieve. Its proven OM460 engine, intelligent Mercedes PowerShift 3 transmission and durable 4x2 driveline provide the perfect balance between performance, fuel efficiency and operating reliability. Whether transporting goods across borders or supplying regional distribution networks, this tractor is built to keep your business moving. More Than Just Efficiency A successful transport operation depends on flexibility. The factory-installed Mercedes-Benz PTO allows the Actros to operate a wide range of hydraulic trailer applications, while the genuine JOST fifth wheel provides a secure and reliable connection for tanker trailers, container chassis, curtainsiders and bulk transport combinations. Gbjdpfxjy R Txzs Ahmsr With dual 480-litre aluminium fuel tanks providing a total capacity of 960 litres, operators benefit from longer driving ranges, fewer refuelling stops and increased productivity throughout every journey. Ready for Demanding Operating Conditions Not every transport route follows perfectly maintained highways. Loading terminals, industrial facilities, construction access roads and remote project locations all place additional demands on your equipment. That's why this Mercedes-Benz Actros has been factory-equipped with the renowned Grounder specification, reinforced chassis, increased ground clearance and N3G Off-Road Vehicle Classification. Combined with an upgraded cooling package, cyclone dust filter, construction-site air filtration, elevated air intake and additional fuel filtration, this tractor is prepared to perform reliably in hot, dusty and demanding environments across Africa, the Middle East and other international export markets. Why Buy from Schaften Automotive? Since 1977, Schaften Automotive has specialised in supplying premium commercial vehicles from leading European manufacturers. With more than 150 vehicles in stock, we offer immediate...

Condition: new, mileage: 2 km, power: 330 kW (448.67 HP), fuel type: diesel, tire size: 315/80 R 22.5, axle configuration: 4x2, wheelbase: 39,000 mm, fuel: diesel, fuel tank capacity: 960 l, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro3, suspension: steel, Year of construction: 2025, Equipment: ABS, air conditioning, cruise control, electric window regulation, power assisted steering, - 2 fuel tanks - Autoradio Gbsdpfsy R Udxsx Ahmjr - CD - Power windows front - PTO - Sun visor - Tool box - Transportation - Twin wheels - Xenon headlights LOOKING FOR A RELIABLE LONG-DISTANCE TRACTOR UNIT? When your transport operation depends on fuel efficiency, maximum uptime and proven reliability, you need a tractor built to perform every single day. The Mercedes-Benz Actros 2045 S 4x2 has been developed for international transport, regional distribution, tanker operations and general freight where efficiency and durability are essential. Combining the proven Mercedes-Benz OM460 12.8-litre EURO III engine, Mercedes PowerShift 3 transmission and a robust Grounder specification, this tractor delivers the performance and dependability professional fleet operators expect from Mercedes-Benz. AT A GLANCE: ✔Mercedes-Benz Actros 2045 S 4x2 Tractor Head ✔ Mercedes-Benz OM460 12.8L EURO III Engine ✔ 449 HP | 2,200 Nm Torque ✔ Mercedes PowerShift 3 Automatic Transmission ✔ PowerShift Advanced ✔ Efficient 4x2 Drivetrain ✔ Grounder Off-Road Specification ✔ N3G Off-Road Vehicle Classification ✔ Factory JOST 3.5" Fifth Wheel ✔ Factory PTO for Hydraulic Applications ✔ Dual 480L Aluminium Fuel Tanks (960L) ✔ Ready for Immediate Worldwide Export Why This Configuration? Every transport operation has different priorities. Some companies focus on fuel efficiency, while others require maximum reliability during international transport or specialised trailer applications. The Mercedes-Benz Actros 2045 S has been configured specifically for operators working with fuel tankers, bulk trailers, container chassis and general freight transport. Its efficient 4x2 driveline, factory-installed PTO, heavy-duty JOST fifth wheel and 960-litre fuel capacity create a dependable tractor designed to maximise productivity on both regional and long-distance transport routes. Ready For Challenging Environments International transport doesn't always follow perfectly maintained highways. From industrial zones and construction access roads to remote loading locations and challenging export markets, transport vehicles must continue to perform under demanding conditions. The Grounder specification, reinforced chassis, increased ground clearance and N3G Off-Road Vehicle Classification provide additional durability beyond a conventional highway tractor. To ensure reliable operation in hot and dusty climates, this Actros is factory-equipped with an upgraded cooling package, cyclone dust filter, construction-site air filtration, elevated air intake behind the cab and additional fuel filtration. These features help protect critical components while maintaining dependable performance throughout Africa, the Middle East and other demanding international markets. Why Buy from Schaften Automotive? Since 1977, Schaften Automotive has specialised in supplying premium commercial vehicles from leading European manufacturers. With more than 150 vehicles in stock, we offer immediate availability for customers worldwide. From export documentation and international transport to custom-built vehicle bodies assembled according to Dutch quality standards, our experienced in-house team manages the complete process—providing one reliable partner from purchase to delivery. Built Around Productivity...

Condition: new, mileage: 1 km, power: 330 kW (448.67 HP), fuel type: diesel, tire size: 315/80 R 22.5, axle configuration: 4x2, wheelbase: 39,000 mm, fuel: diesel, fuel tank capacity: 960 l, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro3, suspension: steel, Year of construction: 2025, Equipment: ABS, air conditioning, cruise control, electric window regulation, power assisted steering, - 2 fuel tanks - Autoradio - CD - Power windows front - PTO - Sun visor - Tool box - Transportation - Twin wheels - Xenon headlights Built for Long-Distance Transport Where Reliability Matters Gbsdsy Rt N Tepfx Ahmer Modern transport companies demand more than horsepower alone. Whether hauling fuel tankers, bulk trailers, container chassis, chemical tankers or general freight, fleet owners need equipment that delivers maximum uptime, fuel efficiency and dependable performance every day. The Mercedes-Benz Actros 2045 S 4x2 has been engineered to meet these expectations. Combining the proven Mercedes-Benz OM460 engine with Mercedes PowerShift 3 transmission, a robust 4x2 driveline and the renowned Grounder specification, this tractor offers the perfect balance between performance, operating efficiency and long-term reliability. Designed for regional distribution, international transport and demanding export markets, the Actros 2045 S is ready to support businesses where every kilometre matters. Powered by the Proven Mercedes-Benz OM460 Engine At the heart of the Actros 2045 S sits one of Mercedes-Benz's most respected heavy-duty diesel engines. The OM460 is a 12.8-litre inline six-cylinder engine producing 330 kW (449 HP) and 2,200 Nm of torque, providing smooth power delivery and excellent fuel efficiency while maintaining the durability expected from Mercedes-Benz. Its proven EURO III configuration remains highly popular throughout international export markets thanks to its straightforward maintenance, worldwide parts availability and long service life. Engine Specifications: - Mercedes-Benz OM460 - 12.8-Litre Inline 6 Diesel - EURO III Emission Standard - 330 kW (449 HP) 2,200 Nm Torque - Reinforced Engine Mounts - Standard Exhaust Brake - Two-Cylinder Air Compressor - Cooling Package for Very Hot Regions Mercedes PowerShift 3 with PowerShift Advanced Efficient transport depends on smooth and intelligent power delivery. The Actros 2045 S is equipped with the Mercedes-Benz G230-12 automated gearbox, combined with Mercedes PowerShift 3 and PowerShift Advanced. Fast gear changes, Economy and Power driving modes and intelligent shift logic help reduce driver fatigue while improving fuel economy and maintaining excellent driving comfort during regional and international transport operations. Transmission Highlights: - Mercedes PowerShift 3 - PowerShift Advanced - 12-Speed Automated Transmission - Economy & Power Driving Modes - Single Disc Clutch - Transmission Oil Cooling Built for Professional Trailer Operations A reliable tractor starts with a reliable coupling system. This Actros is factory-equipped with a genuine JOST JSK37C fifth wheel, mounted on a reinforced mounting plate with a factory fifth-wheel bracket. The manually lubricated fifth wheel ensures dependable coupling performance and long service life while supporting a wide variety of transport applications, including fuel tankers, container chassis, curtainsiders, bulk trailers and specialised semi-trailers. Engineered for Demanding Operating Conditions Transport rarely takes place under ideal circumstances. The Mercedes-Benz Actros 2045 S features the renowned Grounder specification together with N3G Off-Road Vehicle Classification, providing additional ground clearance,...

Condition: like new (used), functionality: fully functional, Year of construction: 2021, operating hours: 44 h, load capacity: 1,400 kg, lifting height: 2,944 mm, free lift: 1,445 mm, fuel type: electric, mast type: duplex, construction height: 1,965 mm, battery capacity: 210 Ah, battery voltage: 24 V, fork carriage width: 680 mm, fork length: 1,150 mm, fork width: 55 mm, Equipment: CE marking, pallet forks, Brand: Linde Model: L14 Year of manufacture: 26-01-2021 Recorded hours: Confirmed in the computer, 44.5 Condition: Lightly used Certification: CE Power source: Electric Max. lifting capacity: 1400 kg Mast type: Free-Lift Duplex Max. lift height: 2944 mm Max. overall lowered height: 1965 mm Max. free lift height: 1445 mm Cabin options: RFID code lock, weighing system Service & Maintenance: Full 1,000-hour service completed Inspection: The pallet truck will be delivered with a new BMWT-KEUR inspection Warranty: The pallet truck comes with a 3-month warranty! (Ask for terms) 🔥 Specifications of the Linde L14 Pallet Truck: ✅ Brand: Linde ✅ Model: L14 Godpfx Ahew Ekc Hjmobr ✅ Year of manufacture: 26-01-2021 ✅ Hours: 44.5 (verified via Linde computer) ✅ Chassis number: W41173Y00030 🚀 Powerful Mast & Lifting Performance: ✔️ Mast type: Free-Lift Duplex ✔️ Max. lift height: 2944 mm ✔️ Max. lowered height: 1965 mm ✔️ Free lift height: 1445 mm ✔️ Fork dimensions: 680 / 1150 / 55 mm ✔️ Weighing system: Factory-installed original weighing system ✔️ Charger: Built-in charger 24V 35A 1kW 🔥 Maintenance: ✔️ Full 1,000-hour service performed ✔️ Up-to-date software and settings ✔️ Includes new BMWT inspection (valid for 1 year) 💪 Why choose 2BRO-Trading BV? ✅ Professional Service: We have an official Linde LSG diagnostic computer for quick configuration, updates, and error diagnosis. ✅ Fast On-Site Service: Malfunctions are resolved quickly—your forklift will be operational again as soon as possible! Our goal is to keep your operation running! ✅ Replacement Forklift: In case of a breakdown, we can provide a temporary replacement forklift so your work continues without interruption. ✅ Mobile Service Van: Our fully equipped service van enables us to perform maintenance and most repairs directly at your location. ✅ Flexible Configuration: All travel and lift speeds can be adjusted to your needs upon delivery—we return after 1 or 2 weeks for final fine-tuning. 🚨 Don’t miss this opportunity! The 2021 Linde L14 is in excellent condition and ready to go. Contact 2BRO-Trading BV in Mol, Belgium today for more information or a viewing! 📞 Call or email us—we’re happy to help!

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, cutting length (max.): 3,600 mm, cutting width (max.): 400 mm, year of last overhaul: 2024, For sale is a complete stationary sawmill including a dust extraction system and a log infeed system! The new price for the sawing line alone was over €285,000! TECHNICAL DETAILS Cutting length (max.): 3,600 mm Cutting width (max.): 400 mm Gedpezki Txofx Ahmebr MACHINE DETAILS Type of input current: Three-phase Year of last overhaul: 2024 EQUIPMENT Log deck LD1-20LH-3SLP-002 Incline chain conveyor 517100-slp2-002 Log turner 517180-SLP2-002 Wood Mizer set works control unit with chair and joystick controls TBS01 setworks First set of vertical saws TVSSC/002/2018 Outfeed conveyor TVSEH15S-SC3.6-SD-SLP2-002 Waste chain conveyor for slab wood removal CC4-3.6H-SLP2-002 Roller conveyor CR8.3.6H-SLP2-002 Roller conveyor with centralising bed CR8-3.6H-SLP2-002 Roller conveyor with air ram stabilising arms TVSEH15S-FT3.6 Second set of vertical saws TVSEH15S-FT3.6-SLP2-002 Flat chain conveyor with stabilising arms TVSEH15S-FT3.6-SLP2-002 Waste chain conveyor for slab wood removal CC4-3.6H-SLP2-002 Horizontal saw HR700EH15S-1-SLP2-002 Roller conveyor with cross transfer chains CR6.5.4H-P-SLP2-002 Transfer chain conveyer x 8 CC2-2.7H-4-P-SLP-002 Cross cut saw 00/19079 1.65-3.6 Dust extraction system with bag filter and blower unit into trailer.

Condition: like new (used), Year of construction: 2023, operating hours: 50 h, functionality: limited functionality, working width: 1,800 mm, type of input current: three-phase, total width: 2,400 mm, total length: 2,000 mm, total height: 2,200 mm, overall weight: 2,300 kg, additional equipment features: Complete with 6 de-reeling stations, Following consultation over 5 years with major UK manufacturers, production units, including working within factory which builds these machines, this machine was commissioned and built for experimental works to enable proof of concept for UK Government / Ofgem. This machine is built with steel welded frames to robust industry standards and fitted with 202mm diameter mandrel. Other mandrel sizes can quickly and easily be fitted. Six robust steel framed de-reeling stands – on wheels - are included, A steel framed deluge system is included. An alternative individual application system by manifold of a new, unused Grunfeld GRS 5 - One component dispense system, can be included if required, enabling glue supply to individual reels. The electronic controller is by Hartec Control systems, with infinite capstan speed control. Current equivalent machines by Spiraltech start at over £100,000 ! Capstan angle manual control is industry tradition, as once set, no adjustment is needed. Approx 10 paper reels are supplied FOC for pretest alignment. Specially incorporated accessible gearbox readily disconnected from motor. Brand new electric 3 – phase motor with less than 10 hours useage. Selection of forming belts to suit differing materials. Gjdpfx Ahezma E Demsbr

Condition: used, machine/vehicle number: 68839, Year of construction: 2022, total height: 750 mm, total length: 1,400 mm, total width: 1,200 mm, Empty weight: 133 kg Working width: 1.300 cm Quick coupler system: Yes Gsdszrwxlepfx Ahmobr Working width: 1300 mm Brush diameter: 450 mm Drive: hydraulic With side brush Swivel angle: max. 26° (left and right) Weight: 133 kg Dimensions: 1400 x 1200 x 750 mm Equipped with a pendulum suspension and quick-change system. Suitable for mounting on a hitch triangle (A-frame), Cat. I/II front hitch, or specific quick-hitch systems for front mowers Condition: unused Online auction of agricultural, construction and industrial equipment, including CASE / DEUTZ-FAHR / JOHN DEERE / FENDT / KUBOTA / RENAULT tractors, VOLVO / CATERPILLAR / HYUNDAI / KUBOTA excavators, DIECI telehandler, CASE wheel loader, MANITOU aerial platform, BOBCAT and DELVANO skid steer loaders, KRONE balers and mower, PÖTTINGER cultivator, AMAZONE / TULIP seed drill combination, STEENO plough, KUHN mixer wagon, GRUSE potato planter, BOGBALLE fertilizer spreader, AUSA dumpers, CHICAGO PNEUMATIC / ATLAS COPCO / KAESER mobile compressors, CUMMINS / CATERPILLAR / FG WILSON / EUROPOWER generators, BOMAG tandem roller, LINDE electric forklift truck, MOL concrete mixer semi-trailer, RHINO-CROSS steel fence panels and various other machinery and equipment etc. with the majority of the lots located in our own warehouse in Deinze, Belgium. The online auction opens Tuesday 4 August and closes Tuesday 18 August. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Monday 17 August Pickup days are on: - Tuesday 25 August - Tuesday 25 August - Thursday 27 August - Thursday 27 August Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.