Used Schell Mäharbeit Factory for sale (1,764)

Condition: used, operating hours: 892 h, This robust sweeper from Factory Cat is perfect for sweeping larger areas with varying degrees of dirt. Using the two side brushes, you easily sweep the dirt into the path of the machine. The large main brush then sweeps the dirt into the 116 L steel collection bin. The remaining dust is collected in the filter and all this ensures that you can sweep up large amounts of dirt in one go, without leaving any behind on the floor. The chassis is made of sheet steel and is strong enough to last for years. The side brushes are protected by steel caps, and polymer rollers are installed at the corners on the front. This minimizes damage to the wall and the machine in the event of a collision. Factory Cat cleaning machines are manufactured in America and are known for their strong construction, long life and excellent performance. All major components are easily accessible, making the machine easy to maintain. Other Specifications: Hfjdpfx Aonyiqvofnjc - Theoretical capacity: 7,000 sq. ft, - Sweeping width of main brush: 81 cm, - Sweeping width with 2 side brushes: 117 cm, - Side brush diameter: 43 cm, - Battery working time: up to 7 hours, - Power source: 24 V, - Dumpster capacity: 116 L, - High-loss system: No, - Traction on: front wheel, - Maximum speed: 5.6 km/h, - Filter area: 3.43 sq. ft, - Noise level: 71 dB(A), - Weight (without batteries): 385 kg, - Weight (with batteries): 515 kg, - Dimensions (LxWxH): 163 x 94 x 140 cm, All our occasions are delivered with new wear parts and a new battery pack. The Factory Cat TR therefore sweeps like a new machine again. Would you like to know more about this sweeper? Please contact us, our advisors will gladly tell you more about it!

Condition: used, operating hours: 341 h, The Factory Cat GTX 30-C is a ride-on scrubber-sweeper built specifically for the industrial application. With a high downward adjustable brush pressure, the Factory Cat GTX 30-C gets even the most heavily soiled floors clean. With the cylindrical brush system, two counter-rotating brush rollers not only deliver a perfect scrubbing result, but these rollers also ensure that loose debris is collected in a special dirt collection tray. All our occasions are delivered standard with: - Complete service, - New battery pack, - Free on-site delivery, Hjdpfx Aou Iv S Rjfnefc - New wear parts and rubbers, - Service and overhaul, - Explanation and instruction, - Cleaning agents, - Brushes and accessories tailored to your floor. In addition, you can contact Metech for all machine maintenance and reorder cleaning products.

Condition: used, The Factory Cat XR is a sit-on scrubber, suitable for cleaning heavy to very heavily soiled floors. This robust ride-on scrubber is specially designed for applications in industry and for fast and efficient cleaning of medium to large business or production areas, parking garages, et cetera. Faster, better and with very economical use of water and chemicals. You will be amazed at the results! This Factory Cat XR is equipped with the optional sweeping brushes. All our occasions come standard with: - Complete service, - New battery pack, - Free on-site delivery, - New wear parts and rubbers, - Service and overhaul, Hfodpfxou Iv Tbe Afnjc - Explanation and instruction, - Cleaning agents, - Brushes and accessories tailored to your floor. In addition, you can contact Metech for all machine maintenance and reorder cleaning products. In addition to this used Factory Cat XR, we also have new scrubbers and demo models available. Check out our new scrubbers for more information.

Condition: new, Year of construction: 1989, Candle filter, free-standing on 3 stainless steel feet Filtration surface: 30 m²/h Test pressure/operating pressure: 7 bar Volume: 1830 l Length: 1,5 m Width: 1,5 m Hjdpfx Aexbqkgofnsfc Height: 2,9 m Material: Stainless steel 1.4541; wall thickness of jacket and cone 4 mm; of dished bottom 6 mm Features: Outlet: butterfly valve DN150

Condition: ready for operation (used), Heat treatment furnace, annealing furnace, furnace, Used equipment Manufacturer: Budapest Electric Cable Factory Overall dimensions: 890 x 1350 x 1510 mm Weight: 785 kg Electrical data: 400 V, Temperature controller adjustable up to 1100°C Hsdpfsuhmacsx Afnefc +temperature controller in the electrical box

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 1,500 h, power: 200 kW (271.92 HP), Complete pellet production line for the production of feed pellets/straw pellets/fertilizer pellets from agricultural raw materials, whereby the pellet press and hammer mill are also suitable for the production of wood pellets. Hammer mill is completely new (built in 2021) and has only been in operation for 2 hours. Valid ATEX certificate! SCOPE - Pellet press - Conveyor belt - Elevator - Pellet cooler + sieve - Buffer container with discharge for the ground material - 2 cyclones (centrifugal separators) with rotary valve - Fan for cooler extraction - 1 new ring die and various used spare parts - Feeder table for bale shredder - Bale shredder including control - Hammer mill (new) including control - Centrifugal separator - Scheuch dust filter including control - Discharge screw - BigBag station for dust filter TECHNICAL DETAILS System throughput: 1.3 t/h (depending on material) Hammer mill throughput alone: 2 t/h (depending on material) Pellet press output: 75 kW Feeder table length: 10 m Bale shredder output: 35 kW Hammer mill output: 75 kW Output Dust filter: 20,000 m³/h Dust filter manufacturer: Scheuch Dust explosion report: 2023, according to EU ATEX Directive 2014/34 MACHINE DETAILS Hammer mill dimensions: 2,350 x 970 x 1,200 mm Hfsdpsv Ak S Dsfx Afnjc

Condition: excellent (used), Large selection of nice conveying direct from closed cheese factory. Hfjdoycm D Hepfx Afnsc

Condition: ready for operation (used), Fully Equipped Water-Based Paint Factory Sale or lease of the entire site or individual plant components - Over 50 mixing and stirring tanks (stainless steel) - 5 horizontal ball mills (including Netzsch ZWM 88) for fine dispersion - Extensive dispersing, dissolver, and transfer systems - Tank farm with tanker and container unloading - Filling lines for small and large containers - High-bay warehouse with approx. 2,300 pallet spaces Hfodpfx Afsyknluonjc - Container cleaning system - Laboratory, workshop, office, and social areas - Complete utilities, cooling, ventilation, and safety technology (EX design) The existing infrastructure allows for flexible utilization – from immediate production start-up and capacity expansion to project-based or temporary usage concepts. This makes the site attractive for both strategic buyers and lessees/tenants. Further details, technical specifications, and layout plans available on request.

Condition: ready for operation (used), Year of construction: 1995, This SCHELLING FLM 365.002 panel saw was manufactured in 1995. It features a main saw blade diameter of 400 mm and a scoring saw blade diameter of 200 mm, with a maximum saw blade projection of 80 mm. The machine is capable of processing materials like acrylic and glass-fiber reinforced plastic, with a maximum panel length of 3000 mm and a maximum thickness of 80 mm for acrylic. Consider the opportunity to buy this SCHELLING FLM 365.002 panel saw. Contact us for further details. • Technical data: • Main saw blade diameter: 400 mm • Scoring saw blade diameter: 200 mm • Max. saw blade projection: 80 mm • Max. clamp opening: 100 mm • Max. stack height: 60 mm • Main motor power (50/60 Hz): 15 / 18 kW • Saw unit feed speed: 0.2 – 22 m/min • Saw unit return speed: 22 m/min • Forward feed speed: 10 m/min • Backward feed speed: 10 m/min • Working height: 930 mm • Performance and requirements: • Processable materials: Acrylic, glass-fiber reinforced plastic (GFRP) • Max. panel length: 3000 mm • Max. panel width: 2200 mm • Max. thickness (Acrylic): 80 mm • Max. thickness (GFRP): 60 mm • Edges: deburred • Panel flatness: max. wave 5 mm Hfodpfoyhqlrsx Afnjc • Thickness tolerance: ±0.2 mm • Electrical power consumption: approx. 25 kW • Supply voltage: 380 V / 50 Hz • Compressed air requirement: approx. 100 l/min (6 bar) • Extraction requirement: approx. 4000 m³/h (air speed 32 m/s) • Equipment (included with the machine): • Scoring unit • Servo-driven feed (0 – 40 m/min) • Side guides on roller table, automatic adjustment; adjustment range 80 – 2200 mm • Safety light curtain with separate support frame • Hold-down clamps (according to machine configuration) • Cooling and spraying system • Computer control – COMMANDER (PLC/SPS) with display, membrane keyboard, diagnostic system • Graphical display of cutting plans • Electrical cabinet and control integrated in the machine • Slow scoring / pre-cut function

Condition: used, Your contact person in our home Mr: André evening Mr: Marcel Brahms Mr: Simon blank We offer you here a used studs for roller conveyors for sale. When placing the order the required stand height & stand depth please! Included in the scope of delivery: 01 x used studs, Material color: completely galvanized Stand height: 250 mm to 700 mm (freely selectable in turn) Hfsdpfx Afjdf S Eyjnjc Stand depth: 300 to 700 mm (freely selectable in turn) More treble & bass can be customized on request. Our services at a glance: (Prices on request) -Installation, construction our general conditions of erection are to be observed -Shelf testing Shelf inspection according to DIN EN 15635 carried out to comply with the BGR 234 Visual inspection for all shelf systems -Delivery with our own fleet of vehicles (without discharge) Free shipping on request!

Condition: ready for operation (used), Plant Liquidation – Complete Equipment for Tire Retreading For sale is a comprehensive production line for tire retreading, ideally suited for businesses specializing in tire renewal. ⸻ Machinery & Equipment • Buffing/Rasping Machine: Tread and casing preparation (roughening and buffing) • Repair/Skiving Station: Grinding and patching • Extruder/Filling Unit: Cushion gum processing • Cementing/Adhesive Station • Building/Banding Station: For precured tread application • Envelope/Vacuum Station: Envelope and sealing operations • Autoclave including accessories (tire rings, vacuum pump, pipelines, carts) Additional Workstations: • Casing Spreader / Inspection stand • Pressure & Leak Test Station • Final Inspection (Tread and Sidewall Check) Plant & Auxiliary Equipment: • Compressors (Kaeser & Atlas Copco brands) • Extraction and dust removal system at grinding stations • Tire and material carts, shelving units • Tool and small parts set (valves, gaskets, clamps) • Transport and cooling racks • Various vulcanization and operating accessories Documentation: Photos, parts list, and additional documents available on request ⸻ Condition & Delivery • Used, fully operational • Inspection possible at any time • Accessories available • Dismantling, loading, and shipment easily arranged • Shipping via freight forwarder possible ⸻ Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net, plus 19% VAT. Subject to change and errors excepted. Hedpfx Afsxk Tuasnjfc

Condition: good (used), Total contents of recently closed ice cream factory - the UK's oldest ice cream company Parravani's. Hfedexm S Nhepfx Afnec

Condition: good (used), Handtmann VF620 vacuum filler, in lovely condition. Has been pumping veg product into a PowerHeater extruder. Hfsdpfet R Sl Dsx Afnsc

Condition: used, tank capacity: 1,175 l, GENERAL Equipment: Spray head, crane lugs Design: vertical Internal diameter: 1,000 mm Total height: 2,050 mm Heating/Cooling: available Max. permissible operating temperature: 50 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 2.50 bar Support type: height-adjustable feet Location: Bremen Technical documentation: drawing Cylinder temperature control: Thermoplate Nameplate: Volume: 1,175 liters Double jacket volume: 7.0 liters Double jacket material: V2A 1.4301 (AISI 304) Product-contacting material: V2A 1.4301 (AISI 304) Condition: factory new Cylindrical height: 1,250 mm Hfedpsxqcqdefx Afnsc VESSEL Max. permissible operating temperature: 50 °C Number of feet: 4 pcs HEATING/COOLING JACKET Bottom heating/cooling: Thermoplate EQUIPMENT Manhole / Access hatch: on cylinder Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Surface outside: ground/polished Surface inside: ground/polished Feet material: stainless steel

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, year of last overhaul: 2022, A complete BSH production line is for sale. The plant consists of components from System TM (feeding section), Keilzinken Technik NKT, HIT automation (multi-level storage, transport, lamella feeding repair station, planing and Kallesoe, etc.). Planing machines from REX: pre-planer, lamella planer and finish planer. High-frequency press from Kallesoe. 2 silos. Hfodpfx Afswgcchsnsc

Condition: used, tank capacity: 1,050 l, GENERAL Equipment: Level indicator (without guarantee), crane lugs Hfedpfex Dmbmsx Afnjc Design: standing Remarks: Manhole diameter: approx. 420 x 320 mm Internal diameter: 1,000 mm Total height: 1,810 mm Heating/Cooling: available Max. allowable operating overpressure: 6.0 bar Support type: feet Location: external storage Technical documentation: drawing Cylinder temperature control: Thermoplate Volume: 1,050 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,238 mm TANK Number of feet: 3 pcs EQUIPMENT Manhole / dome: in the cylinder Outlet: DN50 DIN 11851 MATERIAL PROPERTIES External surface: marbled

Condition: used, tank capacity: 1,000 l, GENERAL Equipment: Level indicator (without guarantee) Design: upright Remarks: Manhole diameter: approx. 420 x 320 mm Hjdox Dmbgspfx Afnefc Internal diameter: 820 mm Total height: 2,350 mm Heating/Cooling: available Max. permissible operating overpressure: 6.0 bar Base type: feet Location: external storage Technical documents: drawing Cylinder tempering: Thermoplate Volume: 1,000 liters Product-contacting material: V2A 1.4301 (AISI304) Condition: factory new Cylindrical height: 1,238 mm TANK Number of feet: 3 pcs EQUIPMENT Manhole / Dome: in the cylinder Outlet: DN50 DIN 11851 MATERIAL CHARACTERISTICS Exterior surface: marbled

Condition: new, functionality: fully functional, machine/vehicle number: 1.161-070.0, working width: 510 mm, area performance: 2,805 m²/h, warranty duration: 24 months, water tank capacity: 70 l, noise level: 66 dB, battery capacity: 105 Ah, Technical specifications: Condition - NEW! Catalog number: 1.161-070.0 Drive type: Battery (not included in the set) Drive: Traction motor Brush working width (mm): 510 Vacuum working width (mm): 900 Fresh/dirty water tank capacity (l): 70 / 75 Theoretical area performance (m²/h): 2805 Brush speed (rpm): 180 Brush contact pressure (g/cm² / kg): 13 / 20 Water consumption (l/min): max. 2.3 Sound pressure level (dB(A)): 66 Gross weight (kg): 345 Weight without accessories (kg): 100 Dimensions (L × W × H) (mm): 1310 × 590 × 1060 Scope of delivery and equipment: The set includes NO batteries and NO charger Hfjdpfxsxnzuis Afnjc Squeegee 900mm V-shaped with oil-resistant polyurethane rubbers Disc brush 510mm red - medium-hard Features: Powerful drive Automatic water stop Solenoid valve 2-tank system The option of a machine ready to work with batteries and charger is available in our other listings. Advantages: - Self-explanatory symbols and a clear control panel. Short training phases. Easy handling thanks to a few yellow-coded controls. - Robust construction with integrated disc brush head. High area performance thanks to the large working width. Brushes are changed via pedal ejection. - Particularly maneuverable machine. Good overview of the surfaces to be cleaned. Easy transport. Key features: - Thanks to its slim and compact design, our battery-powered ride-on scrubber-dryer BD 50/70 R Bp Pack Classic with disc brush technology is extremely easy to maneuver and transport – even in elevators, for example. This positions the affordable entry-level model as a viable alternative to walk-behind scrubbers.

Condition: excellent (used), Year of construction: 2020, operating hours: 4 h, functionality: fully functional, machine/vehicle number: 1VRA170V7L1001764, overall weight: 4,990 kg, fuel type: diesel, color: yellow, empty load weight: 4,990 kg, fuel: diesel, emission class: euro4, number of seats: 1, drive condition: 100 %, chain condition: 100 %, tire condition: 100 %, Equipment: additional headlights, all wheel drive, differential lock, gripper hydraulics, hydraulics, rubber tracks, soot filter, For sale we offer a Vermeer D20x22 S3 (Series III) horizontal directional drill from 2020—a thoroughly inspected, medium-class machine designed for guided drilling applications for telecommunication, power, gas, and water/sewage installations. This model is renowned for its compact size, high work precision, and excellent power-to-weight ratio. The drill rig was purchased from the official Vermeer dealer in Poland. Due to a lack of projects for this machine, it remained unused at the company premises, currently showing only 4 operating hours. It was occasionally started to keep it running and sometimes moved within the premises. Its condition, as shown in the photos, is virtually perfect. We welcome you to inspect the machine in person. Additional purchase options: - DigiTrak GPS Falcon F2 locator - Mud system at €7,000 net. NOTE! The price in the listing applies to the MACHINE ONLY! Hfjdpfxeyf Ianj Afnsc We have various drilling rigs for sale—ask our sales representatives for more information. We offer all payment forms: Leasing, financing, cash, and bank transfer. If you pay by cash or bank transfer, you can drive the vehicle away immediately. We also provide insurance services—we will calculate the lowest insurance premium for any vehicle—TRY US! We deliver paid cars and trucks directly to your indicated address anywhere in Europe. Technical Specifications: - Model: Vermeer D20x22 S3 Navigator - Year of production: 2019 (2020 MODEL) - Type: HDD horizontal directional drill Engine: - Manufacturer/model: Deutz TD2.9 - Power: 74 HP (55 kW) - Fuel type: Diesel - Max. rotational speed: 2,600 rpm - Cooling: Liquid - Emission class: Tier 4 / Stage IV–V Drilling parameters: - Thrust/pullback force: 19,500 lb (86.7 kN) - Spindle torque: 2,250 ft-lb (3,050 Nm) - Max. spindle speed: 257 rpm - Minimum drilling diameter: 3" (76 mm) - Max. carriage speed: 48.8 m/min - Drill frame angle: approx. 17–18° Dimensions and weight: - Transport length: approx. 5.82 m - Width: approx. 1.21 m - Height: approx. 1.88 m - Operating weight: 4,990 kg Features and equipment: - Hydraulic breakout (rod breaker) - Stakedown system (ground anchoring) - Strike Alert underground utility warning system - Remote lockout - Semi-automatic rod loading system - Clear control panel with joysticks - Compact design—ideal for urban job sites Machine advantages: - Excellent power parameters despite compact size - High drilling precision - Reliable Deutz engine - Popular model—easy access to spare parts and service - Perfect for fiber optics and power cables Note: Due to system limitations, the year of production was entered as 2024 and marked as NEW, although the actual production year is 2020. The listed price is net and applies to exports as well as companies. Substantial discounts possible for private buyers— Contact us directly by phone for your best price!

Condition: excellent (used), Small ice cube factory currently situated within national football stadium. This system was designed to supply ice for the national football stadium. We do not have any documentation currently but think it consists of 4 x 1000Kg Ziegra units set up as two double ice machines each dropping in to two mobile hoppers. The system is in excellent condition as it was only used for a short time before it was apparent that it was easier to buy the ice in and have it delivered direct to each catering outlet in the stadium. The machines are badged Williams Refrigeration (the supplier) and Manitowok but look like they are Ziegra units. Hjdotpc T Sepfx Afnofc

Condition: good (used), Conplete contents of recently closed UK sauce and soup factory Hjdpfeqygb Hsx Afnefc

Condition: new, functionality: fully functional, he EUROPA JAINNHER JHV-1008CNC vertical grinding machine is designed for grinding of large components used in the transport, aerospace, power generation, oil & gas, hydraulic and precision components. With a grinding internal diameter range from Ø50 to 800 mm, a maximum outside diameter of Ø1000 mm. The maximum height of the workpiece is 800mm, with a maximum worktable load of 1200 kg. Hfsdpfx Ajnzkvhjfnec EUROPA Jainnher JHV-1008 CNC Vertical Grinder Capacity Range of I.D. grinding 50 – 800mm Maximum O.D grinding 1000mm Z axis maximum grinding height (OD) 800mm Z axis maximum grinding height (ID) 50 – 250 : 325mm / 250 – 800 : 800mm Maximum swing diameter 1000mm Maximum installed component height 800mm Maximum work table load 1200kg Email for latest factory build availability

Condition: used, Complete factory for the production of furniture cabinets, composed by: SZ0M23) Angular Panel Saw "GIBEN" Tip 17 (mm 5600x2700) with "SIRIO" automatic unloading and stacking system SZ0M25) Panel Saw “GIBEN” Mod. GammaDue (mm 3800x2200) SZ0M26) Panel Saw (Multi-saws) “GABBIANI” (finished panels mm 4250x2120) SZ0M27) Laminating Line “BARBERAN” for melamine papers (glue on paper) SZ0M29) Pressing Line “COLOMBO REMO” (mm 1400 x 9600) for paper / veneer / laminates SZ0M30) Pressing Line “FRIZ” (mm 1400 x 6200) for paper / veneer / laminates SZ0M41) 4-sides Sizing & Edge Banding Line “IMA” Combima fast handling “RBO-BIESSE” SZ0M42) 4-sides Sizing & Edge Banding Line “IMA” Combima softforming with a second double side Sizing & banding machine STEFANI and automatic handling equipment “TOMASSINI” SZ0M39-40) Edge Banding Line (single side) for narrow pieces “HOMAG” Mod. KAL 310 with Splitter "NARDELLO" Mod. Elegance SZ0M35-36) Multi-Borer “BIESSE” Techno Logic with Loader + Unloader “TOMASSINI” SZ0M45) CNC Multi Boring and Dowels Inserting Line “BIESSE” Techno FDT with fast handling “RBO-BIESSE” SZ0M37) CNC Working Center “MORBIDELLI” Mod. Author 600 KL SZ0M56) Reel Cutting and winding machine “CEFLA-DUSPOHL” Tipo RSW 2200 T SZ0M01) Wooden strips end-cutting Line "OGAM+SALVADOR" SZ0M07) Wooden strips end-cutting and stacking Line “SALVADOR+SACOT” SZ0M08) Wooden strips end-cutting and stacking Line “SALVADOR+CMA” SZ0M11-17) Preparing Line for honey-comb panels SZ0M18) No. 6 Mutli-openings (daylights) hot hydraulic presses "COLOMBO REMO" SZ0M21) Sizing and top & bottom Calibrating line for honey-comb panels "GABBIANI + CELASCHI + ELMAG + COSTA Sanding Machines" Hfjdpocr U Urefx Afnjc And many other machines (i.e. multi-borer "VITAP", circular saws, glue spreaders, etc.), saw-dust suction system, rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: excellent (used), Complete factory for the production of furniture cabinets, composed by: KZ2207) “BIESSE” FDT - CN Drilling and Dowels Inserting Line, composed by: Hedpfoh T Dvtox Afnofc Loader "RBO" Tornado, 2 x CN Multi-Borers "BIESSE" FDT, 1 x CN Multi-borer and dowels inserter "BIESSE" SDT CN, Stacker "RBO" Tornado KZ2205) 4-sides Sizing and Edge Banding LINE "HOMAG", composta da Double-station portal Loader "ESSE2", 1st Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/20/QA/15, Turning station at 90° "HOMAG" TD 31/30/12, 2nd Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd Turning station at 90° "ESSE2", Double-station portal Stacker "ESSE2" KZ2210) 'BREMA (BIESSE)' Mod. Vektor CNC-LINE for Drilling-Routering-Inserting: Hedgehog (18 positions), CNC Vektor GLR 30-13, Vektor XL 40-30, Idrak-3, various Transfers KZ2090) Sander (Veneer Sanding machine) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry-CNC with edge banding unit "MORBIDELLI" Planet HP6018 (2 Tables, 6 reels) KZ2033) Edge bander "HOMAG" KAL 310 with Loader-feeder "ESSE2" KZ2075) Furniture assembling LINE "TERMOPAK" with carcasse press (through-feed) KZ2203) Sawing LINE "SALVADOR" (panels cross-cutter + splitter) with Loader "ESSE2" KZ2009) VENEER Department (double-knife guillotine "MONGUZZI", cross-cut shear "MONGUZZI"; splicing machine "KUPER", guillotine shear "TAGLIABUE", ecc) KZ2201) Short-cycle Pressing LINE "WEMHONER" useful size mm 1300x6200 KZ2215) Automatic panels storage System "ESSE2" Mod. MAGAZZINO N° 3 Saw-dust Filtering Stations "MION" (1st of Kw 132, 2nd of Kw 55, 3rd of Kw 22) Various vehicles (truck, van, etc.) And many other machines (i.e. CNC "BIESSE" Skipper 130, small multi-borers "VITAP" and MORBIDELLI", circular saws, etc.), rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: excellent (used), O04024) AUTOMATIC BOARD STORAGE SYSTEM for PANELS - SIRIO Total Space Required (with panel saw) mm 10000 x mm 47000 (ca.) Mobile upper bridge (on X-axis), with mobile carriage (on Y-axis) and relative vacuum suction cup assembly (mobile on Z-axis) max. speed Mobile upper bridge (on X axis) 150 m/min (ca.) moving carriage speed (on Y axis) 150 m/min (ca.) vacuum suction cup group speed (mobile in Z axis) 60 m/min (ca.) Vacuum suction cup group, 90° rotating Automatic management system (by scanner) of the cut panels (but remaining in the warehouse) O04025) PANEL SAW WITH REAR LIFTING TABLE Mod. FH 6 430 Hfjdpfowrz Dbex Afnjc Numerical Control MCS Evolution. Software SIEMENS WinAC RTX Rear pushers (N.) 1 Twin Pusher - DUPLUS2. With No. 12 clamps / grippers Max. cutting width (mm) 4300. Useful stroke of the pushing system (mm) 4300 Max. blade projection (mm) 135 Scoring Unit (max. diameter saw) mm 200 Main Sawing Unit (max. diameter saw / power) mm 460 / Kw 21 Turning device (rotating unit) at 90° Adjustable speed of the saw carriage (m/min) 1 - 150 No. 5 Front supporting tables with Air blowing system Total power (Kw) 33 (ca.)