Used Casting for sale (1,820)

Condition: used, Technical details: floor-plate length: 2990 mm plate width: 1990 mm Hfedjval H Rjpfx Ap Eon plate height: 190 mm Plate thickness: 190 mm weight of the machine ca.: ca. 7,0 / pro Platte t transport dimensions LxWxH: ca. 3,0 x 2,0 x 0,2 / pro Platte m There are 2 plates for sale. Material cast steel Surface milled/finished T-slots according to DIN 650: 8xT-slots large: a=36; h=70; b=55; c=25.5 mm 7xT-slots small: a=28; h=38; b=47; c=21 mm Center stand 123 mm 9x through holes Ø 80 mm 6x through holes Ø 33 mm *

Condition: used, Technical details: floor-plate length: 1500 mm plate width: 1250 mm Hfjdpfx Apoval Ihj Ejn plate height: 250 mm Plate thickness: 250 mm weight of the machine ca.: 1,1 / pro Platte t transport dimensions LxWxH: ca. 1,5 x 1,3 x 0,3 / pro Platte m There are 4x clamping plates for sale. Material cast steel T-slots according to DIN 650 a=21.5; h=40; b=38.5; c=17mm Center distance 250mm *

Condition: used, Technical details: table diameter: 4500 mm faceplate diameter: 4500 mm operating hours: 0 h swing diameter: 5000 mm turning diameter: 5000 mm workpiece height max.: 2500 mm control: Sinumerik 840D SL x-axis: 300 Hub/ram Slide mm x-axis: 2850 Hub / ram travel mm x-axis: 2850 working without tool mm x-axis: 5000 with tool changer mm w-axis: 1800 Querwegelevating cross rail mm tool holder / places: 12 tool taper: HSK 100 (spindle) workpiece weight: 100 t table speed: 1 - 50 U/min T-slots: 8 Stück (36 H12) stroke speed: fräsen ram speed: 4000 U/min rapid power traverse in X-and Z direction: 8000 mm/min Torque: fräsen: 100.000 Nm Torque: drehen: 200.000 Nm total power requirement: 80 (2x40) kW weight of the machine ca.: 140 t dimension machine approx.LxWxH: 11,5 x 6,6 x 8,4 m NEW CNC vertical turret lathe - manufactured upon official order and deposit. The photos shown are of a newly built machine that we delivered to a customer. (The photos are for illustrative purposes only.) Application of the manufacturing processes: Turning, such as external longitudinal turning, internal and external facing and profile machining. Grooving, such as internal and external Drilling, such as short hole drilling and deep hole drilling Milling, such as face-corner profile and T-slot milling Thread cutting But also suitable for roughing and end machining. Hfedpfx Asu Ix H Djp Eon The machine bed, designed with a welded construction, absorbs extreme cutting forces. The table is made of high-strength meehanite cast iron. To withstand heavy loads, the part weight is supported by two high-precision tapered roller bearings. Furthermore, the table is equipped with hydrodynamic support for the workpiece. other features: automatic tool change jaw chuck (8 pieces with power clamping spindle and hardened jaws) incl. cooling system 40bar with filter unit hydraulic and lubrication equipment ATOS and Dropsa with measuring system of axes Heidenhain Renishaw NEW - with guarantee & service via WWM AG *

Condition: like new (used), Year of construction: 2022, functionality: fully functional, load capacity: 1,500 kg, The Siegmund M positioner is ideal for welding, assembly and maintenance work. Positioning is carried out using a manually driven handwheel. Positioner with load capacities of up to 1,500 kg. Torque 900 Nm Handwheel with handle Ø 315 mm U-angle compatibility Hfsdovlgzaopfx Ap Ejn System 28 Max. length of U-angle 3,000 mm A - Working height 850 mm B - Column height 955 mm C - Total height 1,140 mm D - Width of base plate 600 mm E - Length of base plate 600 mm Price does not include 3D accessories. Prices 3-D accessories, heavy cast parts, wall thickness 28mm, everything processed, special prices New: original angle 28 U-shape 500mm x 200mm x 200mm (surcharge 500.-€) or 2000mm x 200mm x 200mm (surcharge approx. 1000.-€) or 2400mm x 200mm x 200mm (surcharge 1300.-€) or with table top 28 hole, 2000mm x 1000mm x 200mm (surcharge 2000.-€) several positioners are available

Condition: good (used), Code: 0193 Brand: CASATI MACCHINE Model: BIG 3200 - CE Standard Hydraulic two knives veneer pack guillotine shear - CE Standard Description: Sturdy steel made structure, cast iron knife beam. Self-lubrificating prismatic slide-ways The machine allows, with a single operation, to cut the veneer pack on both sides to be trimmed - The simultaneous trimming on two sides of the veneer pack is carried out thanks to the movement at the same time, of two knives, one fitted on a fixed structure and the other one on a moving part - The machine is equipped with an adjustable rear shoulder, as well as with a pressor to clamp the veneer pack during cutting operations. Possibility of working as a single guillotine shear Useful cutting length (as double guillotine shear) mm 3200 Useful cutting length (as single guillotine shear) mm 3550 Pressore stroke mm 100 Pressor width mm 550 Min width to be cut mm 18 Hedpfsqzky Eox Ap Eefn Max width to be cut mm 530 Scrap adjustment field mm 0/50 Photoelectric cells Electronic programmer allowing to program the number of cuts to be effectuated and the relevant width Perimeter protections Total power installed Kw 13, 9 Operating pressure bar 6/7 Overall dimensions mm 5200 x 1700 x 1800 h Weight kg 9000

Condition: new, saw blade diameter 300 mm capacity 90 degrees: round 102 mm capacity 90 degrees: square 90 mm Hsdjfg Rlajpfx Ap Eofn capacity 90 degrees: flat 120x80 mm capacity 45 degrees: round 90/80 mm capacity 45 degrees: square 80/70 mm capacity 60 degrees: flat 90x70/85x70 mm total power requirement 1,5/2,0 kW weight of the machine ca. 0,135 t dimensions of the machine ca. 0,5 x 1,05 x 1,0 m The versatile professional metal circular saw. Convincing in performance and price. · For miter cuts left up to 45° · For sawing steel, stainless steel and, to a limited extent, aluminum profiles · Spindle vice with double clamping arm for low-burr cuts · Cone safety clutch to protect the saw blades. · 2 speeds 33 + 66 rpm · Automatic cooling directly on the saw blade · Double bearing for saw head · 24 V safety switch in the handle with restart lock · Length stop, assembly tool · Closed cast, solid cast superstructures · Miter adjustment on operator side machine base (option) ATTENTION: Price is without saw blade!!! (saw blade price EUR 93 / EUR 123)

Condition: new, bore capacity in steel (diameter) 60 mm bore capacity in cast iron (diameter) 70 mm threading cutting capacity: M50 throat 420 mm bore stroke 260 mm Hsdpfofg U Tuox Ap Ejfn spindle taper MK 5 feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range 64 - 1210 U/min transmission ratio 12 Stufen column diameter 220 mm table surface area 600 x 600 mm total power requirement 4 kW weight of the machine ca. 0,82 t dimensions of the machine ca. 0,7 x 1,2 x 2,7 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 100 mm capacity 90 degrees: flat 130 x 80 mm capacity 45 degrees: round 100 mm capacity 45 degrees: square 85 mm capacity 60 degrees: flat 90 x 80 mm clamping range 130 mm turning speeds 30 / 60 U/min dimensions of saw-blade 350 x 32 x 2,5 mm total power requirement 1,1 / 2,2 kW weight of the machine ca. 0,22 t dimensions of the machine ca. 1200 x 860 x 900 m Aktionspreis 2026 Inkl. base frame !!! Manual miter saw for miter cuts from 45° left to 45° right. Steel worm wheel with double ball bearings Hjdpfx Apefmck Ho Ejfn Saw blade shaft mounted on eccentric made of spheroidal cast iron Bronze wheel with wedge and conical coupling to ensure maximum power transmission to the steel worm wheel Vice with adjustable guide bars Adjustable anti-cutting burr device (enables burr-free cutting) Length stop Double return springs Safety main switch Emergency stop button Speed switch Electric coolant pump for lubrication and cooling of the saw blade (attachment a micro spray device possible) Motor 1.5/1.8 kW - 400 volts

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180x100 mm Hjdpfx Apjd Iin Hj Eofn Working height 925 mm saw blade turning speeds 15 - 70 U/min total power requirement 1,8/2,2 kW weight of the machine ca. 0,71 t dimensions of the machine ca. 1,9 x 1,45 x 2,1 m ACTION PRICE!!! High-performance vertical circular saw hydropneumatic fully automatic.(20192) · miter left 60° + right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm drive with large Transmission ratio, integrated in a stable cast housing for Achieving optimal cutting results · Vice with double clamping arm for low-burr cuts Lateral quick shift when changing the miter · Precision prism guide of the gear head, laterally adjustable · Particularly stable base frame with built-in automatic cooling system · Large chip drawer · Chip removal brush in the saw blade protective hood MPS control: · Save cut start/end · Display of current consumption, number of pieces, cutting time... · Adjustable water cooling · Cutting pressure regulator ATTENTION: Price is without saw blade!!! (saw blade price EUR 204)

Condition: good (used), Code: 0460 Brand: SAMCO Model: LL 3000 Belt sander with double goose neck for wood, furniture, window frames, composite materials, aluminium and various Technical data: Cast-iron structure Table length mm 3000 Table width mm 800 Vertical stroke mm 650 Motor Hp 4 N°2 speeds rpm 1450/2800 Automatic table lifting Belt width mm 120 Belt length max mm 8000 Overall dimensions mm 4350 x 1500 x 1550 h Weight kg 600 Hfodpfx Aszpvy Ajp Esn

Condition: used, Tenoning spindle 1 0 Number of milling agregates 2 St. Spindle diameter 40,50 mm Item 1: Okoma UF1 S Angle Combination Unit and Item 2: UF2 EG Rebating Machine, incl. Item 3: Tooling Set for IV78 Timber Windows, IV78 Timber Entrance Doors, and IV78 Timber-Aluminum Windows (Gutmann system) with straight and angled sash profiles For sale on behalf of a customer; still connected to the mains and extraction system The machines are in excellent condition and can still be demonstrated ----- Manufacturer's Technical Description: Item 1: Okoma UF 1 S Tenoning and Profiling Machine / Rebating Machine ----- Compact, heavy-duty automatic window machine featuring a cast-iron construction, consisting of: Top-mounted cross-cut saw with 12-position turret stop system; Positive-guided saw guard for accident prevention Tenoning spindle: 40 mm diameter x 252 mm length; 2-step stroke mechanism for 3 tool positions (stroke height: 83 mm); Motor: 7.5 kW Sliding table: Adjustable on both sides from 0 to 60 degrees Automatic feed system with various infinitely variable speed settings; dual pneumatic clamping system; Length stop (LAS) with 3-position system, 2300 mm capacity Automatic transfer unit to the profiling section Profiling spindle: 40 mm diameter x 252 mm length Pneumatic stroke: 112 mm (adjustable) for 2 tool positions Motor: 7.5 kW; Spindle horizontally adjustable relative to the tool cutting edge; Adjustable front milling fence jaw Glazing bead saw with 3 kW motor and 4-position turret head adjustment; Heavy-duty articulated feed system, infinitely variable from 0 to 25 m/min. adjustable, Roller groups pivotable inward and outward Counter-stop with 5-position turret head Frame milling unit ----- Item 2: OKOMA Automatic Rebating Machine, Model UF 2 EG ----- Power Specifications: - Operating voltage: 3-phase, 380 V, 50 Hz - Compressed air: Air requirement: 13 NL/min; Operating pressure: 8 bar Conditioned air: According to Pneurop 6611 1. Profiling Spindle 1: - Spindle arrangement: Right - Power: 11 kW - Speed: 7000 rpm - Direction of rotation: Climb and conventional milling - Spindle diameter: 50 mm - Usable length: 272 mm - Max. tool diameter: 230 mm - Vertical (U-axis) movement of the profiling spindle - Vertical positioning: Actuation: Pneumatic cylinder; 90 mm stroke for 3 tool positions Position sensor: Limit switches - Horizontal positioning: Actuation: Pneumatic cylinder (forward/backward) Position sensor: Limit switches - Automatic plunge mechanism: Plunge speed adjustable to ensure tear-out-free rebating - Safety and dust extraction hood with 140 mm diameter connection port 2. Profiling Spindle 2: - Spindle arrangement: Right - Power: 11 kW - Speed: 7000 rpm - Direction of rotation: Counter-rotation - Spindle diameter: 50 mm - Usable length: 272 mm - Max. tool diameter: 230 mm - U-axis movement of the profiling spindle - Vertical positioning: Drive: Pneumatic cylinder; 90 mm stroke for 3 tool positions Position sensor: Limit switches - Horizontal positioning: Drive: Pneumatic cylinder (forward/backward) Hfedpjy T R Tbofx Ap Een Position sensor: Limit switches - Safety and dust extraction hood with connection port (140 mm diameter) 3. Hardware Routing Unit EG: - Spindle arrangement: Right - Drive: 3 kW three-phas...

Condition: used, Year of construction: 2017, operating hours: 3,500 h, Equipment: Base package AK635 Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive Tyres 385/65 R22.5 Permissible total weight 25,000 kg Hfodpoy D Nktjfx Ap Esn Hydraulically adjustable support leg Splash guards (inner and side fenders) Mercedes-Benz diesel engine OM502LA, 440 kW at 2,000 rpm, compliant with EUROMOT IIIB emission standard Load-dependent feed control including automatic scraper floor reversal Separate drives for feed roller and scraper floor (twin drive) Fuel tank 750 litres Feed roller: length 1,690 mm, diameter 510 mm, with mounted toothed segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: flail tip “Streusel” Additional hydraulic connection 20 l/min Centrally arranged wear strips Electric pump for operating cylinder functions (e.g. raise/lower support leg and open/close rear basket, fold/unfold rear conveyor, release drive) when the engine is off 24 V electrical control Separate control box at the rear of the machine Hydraulically folding fine shredding basket with flap (mesh size from 30 - 280 mm, gradation on request) Rear conveyor: belt length 6,150 mm, belt width 1,500 mm, discharge height 4,500 mm, hydraulically foldable, with anti-magnetic centre section Lower conveyor: belt length 1,700 mm, belt width 1,400 mm Scraper floor with 34 slats Radio remote control incl. transmitter, receiver, 230 V charging station, 12/24 V charging cable, transmitter bracket. The following functions can be controlled: engine stop, engine speed +/-, material feed: on/off/reverse, fine shredding basket: open, rear/lower conveyor: on/off, feed roller: reverse, scraper floor stop/reverse/forward, support leg: raise/lower, drive preparation: stop/reverse/forward/release Drive preparation Acoustic start-up warning Paint finish: RAL2011 deep orange Fine shredding basket 60 mm Optional equipment: Impact plate with impact bar Overband magnet -Neodymium- Frame for overband magnet Smooth feed roller Scraper floor with cleaning holes Delivery date to be agreed

Year of construction: 1991, condition: ready for operation (used), Available immediately, ex works: Hsdjz Ixmajpfx Ap Eofn Drill press, Metalac Type BR 32 Year of manufacture 1991 Spindle taper MK 3 Drilling capacity: 32 mm steel, 40 mm cast iron Automatic feed Table: 600 x 470 mm Drilling stroke: 180 mm Overhang: 280 mm 2 vices Coolant system Weight: 750 kg Price: EUR 1,250.00 plus VAT, ex works.

Condition: good (used), Cast iron bed - Floor Plate Useful surface (L x W x H): 3600 x 1200 x 300 mm Hedsz I A Ubopfx Ap Esfn 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T

Condition: good (used), Year of construction: 2014, Knuth Sinus 330 x 1500 Knuth Sinus 330 x 1500 lathe, manufactured in 2014, in very good original condition. The machine comes from a special production run by a renowned German machine tool company. CE compliant!! Technical data: Year of manufacture: 2014 Knuth Sinus 330 x 1500 Working area: Workpiece length: 1,500 mm Turning diameter over bed: 660 mm Turning diameter over cross slide: 440 mm Turning diameter without bridge: 900 mm Bridge length: 320 mm Bed width: 400 mm Travel distances: Travel X-axis: 368 mm Travel Z1-axis: 230 mm Swivel range of top slide: 45° Main spindle: Spindle speed: 25 rpm - 1,600 rpm Spindle bore: 105 mm Spindle mounting: D1-8 Spindle taper: ø 113 mm / 1:20 Rapid traverse: Rapid traverse X-axis: 2,000 mm/min Rapid traverse Z-axis: 4,000 mm/min Tailstock: Tailstock spindle diameter: 90 mm Tailstock taper: 5 MK Tailstock quill stroke: 235 mm Tailstock cross slide: ± 12.5 mm Drive power: Motor power, main drive: 7.5 kW Dimensions and weights: Dimensions (L x W x H): 3.21 m x 1.23 m x 1.6 m Weight: 2,800 kg About the machine: The Sinus D is the largest series in the universal lathe segment. Conventional lathes like this are characterized by their robust design and high versatility. The design follows a classic design, but is based on a heavy, one-piece cast machine bed. As with heavy-duty lathes, the power transmission between motor and spindle is also achieved here via a manual lamellar clutch. With integrated functions such as the removable bed bridge, rapid traverse, and a taper turning device, this series offers optional solutions for machining long workpieces or large flanges. One-piece heavy cast bed with high stability Massive headstock with large spindle bearings Rapid traverse in 2 axes for fast positioning Taper turning attachment for additional applications Well-designed safety features Hjdpfx Asz Irwfep Esfn You can find more lathes from well-known manufacturers on our website.

Condition: used, Donau DR52 Drilling capacity in steel (diameter) 52 mm Arm length 1140 mm Workpiece height max. 830 mm Drilling capacity in cast iron 60 mm Taper MK 5 Table size 1100 x 620 mm Drilling spindle stroke 225 mm Hfjdpfsz D U Tzsx Ap Esn Spindle speed range 28 - 1400 rpm Feed rate 0.1 - 0.5 mm/rev Total power consumption 10.0 kW Machine weight approx. 3.5 t Machine dimensions approx. 2.4 x 1.3 x 2.61 m

Condition: good (used), Code: 0485 Brand: MASTERWOOD Model: CV1- CE Standard Chain mortising machine for cutting mortises in wooden joinery, doors, furniture, shelves and other items – CE Standard Technical data: Sturdy cast iron frame Max mortise depth 180 mm – Effective depth 150 mm Max mortise length 280 mm Transverse stroke of cutting head 80 mm Vertical stroke of worktable 200 mm Motor 1,8 Hp Max workpiece height 900 mm Hodpfez Et Imjx Ap Ejfn Suction inlet diameter 120 mm Overall dimensions mm 1000 x 600 x 1750 h Weight kg 170

Condition: good (used), Year of construction: 2000, bore capacity in steel (diameter) 32.0 mm bore capacity in cast iron 40.0 mm throat 300 mm bore stroke 160 mm 4 speeds 65 - 2000 U/min column diameter 145 mm table-size 615 x 460 mm feed 0.1 / 0.2 / 0.3 mm/U total power requirement 1.75 / 2.5 kW weight 440 kg dimensions 1200 x 800 x 2300 mm Current list price: approx. 18.000 euros Special price available upon request Features: - Robust column drill press (V-belt drive) - Electromagnetic feed clutch = spindle feed * with overload protection and electric cross-handle control - mushroom-head pushbutton (latching) for EMERGENCY STOP * located on the front panel - continuously variable speed control - clockwise rotation of the drill spindle - Pole-reversible drive motor Hsdpfxozzrfxo Ap Eefn - Infinitely adjustable drilling depth stop - Work table with 2 T-slot - height-adjustable - Separate coolant system, with reservoir - Operating instructions in German

Condition: used, mileage: 415,000 km, power: 355 kW (482.67 HP), first registration: 10/2022, fuel type: diesel, color: white, gearing type: automatic, number of seats: 2, Equipment: ABS, soot filter, Vehicle number: 263424 ---- ASSISTANCE SYSTEMS * Lane Change Warning System INTERIOR * Side trim EXTERIOR * Exterior sun visor OTHER EQUIPMENT Hfjdpjz N Rckjfx Ap Ejn * ZF Intarder Additional features * Automatic transmission, TrXon, 12 gears * MX-13 engine, 355kW/483 hp, driver's cab emblem: 480 * Sunroof with electric operation * Driver's seat: Luxury Air * Co-driver's seat: Comfort Air * Driver's seat, swivel base * Mattress with mattress topper for DAF Relax Bed * Upper bunk * Automatic temperature control and air conditioning * Mattress with mattress topper for DAF Relax Bed * Upper bunk * Automatic temperature control and air conditioning * Curtains with separating curtain * Refrigerator and drawer * Center storage compartment * Dashboard table * LED interior lighting: Luxury * Parking heater with waste heat pump and timer * Wheelbase 4.00m / rear overhang 0.99 m * Work lights, LED * Fuel tanks left and right * Tail lights with LEDs * , . h. Overh. 85-I-AB Fender left * 1195-I-AI-K. tanks: 765 level left + 430 right, H 620 mm * Cab color E1980 Crystal White * Technically permissible gross vehicle weight 20500 kg * JOST JSK37C, cast iron, 150 + 12 mm * Electrical connection, trailer 24V/2x7 po. Cable: 2x7-pole + EBS * Cab air-suspended * XG cab * Two LED spotlights for the rear of the cab * LED skylights * Pneumatic control for parking brake * Axle load monitoring * Front: 8,00t, parabolic, 163 N * Rear: Air suspension SR1344 * Front axle 1, 8000kg, load capacity index 156 * Rear axle 1, 13000kg, load capacity index 149 * Front axle(s): 315/70 R22.5 * Driven rear axle(s): 315/70 R22.5 * Side windows, extended. One side foldable * Adjustable roof spoiler for XG cab * Adaptive Cruise Control with FCW and AEBS-3 * Digital tachograph, VDO 1C, Version G2V1 * Battery energy monitoring * Generator 110 A, batteries 2x 210 Ah AGM ---- Subject to prior sale and errors. The vehicle description is for general identification of the vehicle only and does not constitute a guarantee in the legal sense of purchase. You will receive the exact equipment details from our sales staff. Please contact us.

Condition: excellent (used), CATALOG NUMBER 7479 Technical specifications: - Shaft width 410mm - 4-knife shaft (TERSA) - Noise reduction comb Hfjdpezx Sznofx Ap Esn - Shaft guard - Table length 2610mm - Longer infeed table 1435mm - Cast iron tables - Both tables adjustable - Original, adjustable cast iron guide, angle adjustable - Brake - Diameter of dust extraction outlet 115mm - Motor 4kW - Dimensions (L/W/H) 2610x960x1110mm - Weight 578kg ADVANTAGES – Made in Italy – 4-knife shaft – brake – Noise reduction comb – longer infeed table – unpainted – Used planer, very good condition, original DTR documentation Net price: 21900 PLN Net price: 5093 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7606 Technical data: - shaft width 500mm - number of knives 3 pcs - shaft guard - table length 2530mm - cast iron tables - both tables adjustable - original cast iron guide, adjustable to an angle - motor 3kW - dimensions (L/W/H) 2530x1000x1100mm - weight 920kg ADVANTAGES - made in Italy - 3-knife shaft - used thickness planer Hedpfxszxx Eaj Ap Eofn - very good condition Net price: 8900 PLN Net price: 2070 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: reconditioned (used), functionality: fully functional, Herminghausen SR2 High-precision and conventional centerless cylindrical grinding machine. The machine is suitable for grinding workpieces up to 40 mm in diameter. High machine and grinding stability due to a robust cast iron bed and hydrodynamic segmental chuck bearing. Its low height provides excellent access to all important functions. Quick and easy changeover for different workpieces and materials. Hjdpfx Apozpf H Se Eofn Overhauled: July 2026 Workpiece diameter: 0.5 - 40 mm Grinding wheel dimensions (D x W x H): 290 x 100 x 150 mm Regulating wheel dimensions (D x W x H): 200 x 100 x 120 mm Total weight: 1,200 kg Total power: 5.5 kW / 400 V / 50 Hz

Condition: excellent (used), For sale: a robust WEMAS column milling machine, model FM23. Cast iron construction, very rigid, ideal for tool rooms and maintenance workshops. The machine is equipped with a 3-axis DRO D60-3V digital position readout and Rascher Nürnberg–München measuring scales. Table with longitudinal T-slots, coolant with a separate tank and pump. Vertical spindle with a precision collet and adjustable feed. Power supply: 3×400 V. The machine is complete, has undergone a recent inspection, runs smoothly, and is ready for testing under power. It shows normal signs of use – without any disqualifying play or looseness. Included in the price: 3-axis DRO display, scales on the X/Y/Z axes, coolant tank and pump, hoses, power cable, work light. Additional information from the photos: “WEMAS” and “FM23” nameplates, spindle setting correction plate, DRO panel with mm/inch functions, ABS/INC, calculator. Working parameters, spindle taper, and speed ranges to be confirmed on-site – I can measure the table and X/Y/Z travels. Loading with a forklift is possible. I can assist with organizing transport. Hfsdpfx Aoz Slaqjp Een

Condition: excellent (used), For sale: Professional, heavy-duty bookbinding guillotine from Franz Pytlik Maschinen, Nürnberg. Robust cast iron construction designed for precise cutting of large formats in binderies and printing houses. The machine offers an impressive cutting width of 112 cm, enabling the processing of oversized sheets. The worktable depth is 72 cm. The knife mechanism operates smoothly and effortlessly, while the rear guide, adjustable via handwheel, allows for accurate format positioning. Hfodpfxez Smzio Ap Een Specifications and features: – Manufacturer: Franz Pytlik, Nürnberg (Germany) – Type: manual bookbinding guillotine – Cutting width: 1120 mm – Table depth: 720 mm – Heavy-duty cast iron frame – Cutting lever with wooden handle – Rear guide adjustable by handwheel – Large, stable work surface – Lower shelf for sheets and tools – Knife in good condition (can be resharpened) Technical condition: The machine is complete and fully functional. All mechanisms operate correctly. Normal signs of use – no play and no structural damage. Ideal for use in a bindery, printing house, technical workshop or model making studio.

Condition: new, For sale: Professional industrial butterfly valve GEFA DN200 PN10 The device is brand new, warehouse stock, never installed. High-quality butterfly valve designed for industrial installations: water, chemicals, food industry. Technical data: Manufacturer: GEFA Prozesstechnik GmbH Diameter: DN200 Pressure: PN10 Type: wafer-type butterfly valve Disc material: stainless steel 1.4408 Seal: PTFE (Teflon) Body: painted cast iron Features: - High chemical resistance - PTFE sealing - Durable industrial construction - Easy installation - Industrial standard Hfsdpfx Apjz Sltdo Esn Condition: New warehouse stock, possible minor storage marks Price per piece