Used Diecasting Machines for sale (65,075)

Condition: used, Year of construction: 1992, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm Fpslhcdofrvzvjw Dog weight of the machine ca. 4,5 t lock stroke 230 mm capacity of ejector 40 kN ejector stroke 70 mm height of form 120-350 mm column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 with SBC 2 control for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MO50E and used pneumatic sprayer 401. Recommendation from the manufacturer is some repair in the overhaul plant. It can be carried out in the scope of agreement.

Condition: used, Year of construction: 2000, closing pressure 900 kN clamping plate 540x540 mm distance between columns 350x350 mm weight of the machine ca. 5,5 t lock stroke 280 mm capacity of ejector 60 kN ejector stroke 70 mm height of form 160-400 mm column diameter 65 mm casting capacity 75 kN casting plunger stroke 130 m/m injection plunger diameter 50,55,60 mm casting volume (DIN 24480) 119, 163, 214 cm 2 volume cast pressure 380, 315, 265 kp/cm² casting area 236, 285, 340 cm 2 Traverse Stroke 150 m/m General overhauled Die Casting machine DAW 80 GO with DataLogic control for the use of zinc alloys. Excerpt from the overhaul: · Upgrade of the machine with new control cabinet and operator panel including new electric machine installation · Renewal of the hydraulic system (blocks and valves) · locking unit overhaul Details available upon request The machine is equipped with the following options: Front door motorized, rear door manual handling Cover for drop through area at the subframe Hanging operating desk with monitor 1.0.2 Cover for drop through area at the subframe with scale / chute 3.2.4 Multi-chamber furnace with pump TOC 3.2.1 furnace control cabinet 4.0.1 Hydraulic system for water glycol 6.1.3.1 Wired signal interface for extraction device (DISPO 010) Fpeloyzt D Eshcdw Deg 6.5.2 Equipment package, Remote Service Dialog (RSD) with switch 7.2.2.2 Spraymotion 611 E with servo drive 7.3.1 Lubricant container TD 20 7.4.0.3 Spray rail CR 275 Other options can be offered upon request

Condition: used, Year of construction: 2015, 2015 Kurtz AZ9.20 Low-Pressure Automated Die-Casting System with Balzer Low-Pressure Furnace and Holding Furnace Fpolhey Amnyecdw Dsg High-Specification Kurtz AZ79.20 Low-Pressure Die Casting Machine, Manufactured In 2015, Designed For Precision Aluminium Casting Applications. This Industrial-Grade Unit Features A Robust Hydraulic Closing System, Integrated Mould Cooling Circuits, And Automated Part Removal System, Making It Suitable For High-Reliability Production Environments. German-Built By Kurtz Gmbh, A Globally Recognised Manufacturer Of Die Casting Systems. The System Was Used To Manufacture 4-Cylinder Car Crankcases. By Simply Changing The Casting Molds, The System Can Be Quickly Converted To Produce Any Component Manufactured Using The Low-Pressure Casting Process. This Means It Can Produce Pump Housings, Oil Pans, Cylinder Heads, Cam Carriers, Transmission Housings, And Much More. Travel Movements (Section 2.4) Hydraulic Movements: Closing Unit (Upper Platen): Stroke: Max. 1,400mm. Maximum Opening: 2,400 Mm. Minimum Opening 600mm. Ejector Stroke 50mm. Part Removal: Stroke 1,365mm. Swivel: 180°. Drop Protection Ratio-Clamp RCS 100: Piston Rod Ø 100 Mm. Max Axial Load: 160 Kn. Max Unlocking Pressure: 160 Bar. Min Unlocking Pressure: 65 Bar. Hydraulic Cylinders. Closing Cylinder: 2 × Ø125/60 – 1,400 Mm Stroke. Ejector Cylinder: 4 × Ø100/63 – 50 Mm Stroke. Side Core Pull: 2 × Ø125/60 – 250 Mm Stroke. Front Core Pull: 2 × Ø160/80 – 270 Mm Stroke. Hydraulic Motors: Removal Lift/Swivel Motor: HSE 4.0.0 / SM4.80 – 180° (Manufacturer: Eckart) Pneumatic Movements: Removal Arm Lift: Max Stroke 400 Mm. Pneumatic Cylinder: DNC Ø63-400-PPV-A (Festo). Cooling System: 24 Water Cooling Circuits. 22 Air Cooling Circuits. Total Return Manifold Ø 88.9 Mm. Compressed Air Requirement: 6 Bar. Air Connection: ½". With A Movable And Height-Adjustable BALZER Pression Furnace And A BALZER Holding Furnace. S/No.FM1000063 (2015)

Condition: like new (used), Year of construction: 1995, machine/vehicle number: 10262342, Automated high pressure die casting machine Bühler. 9800 kN clamping force. Fpjlhcdwsfbl Ens Dog Machine is DISMANTLED

Condition: used, Year of construction: 1997, functionality: fully functional, clearance between the columns: 579 mm, casting force: 350 N, stroke length: 420 mm, column diameter: 125 mm, overall weight: 12,000 kg, power: 22 kW (29.91 HP), Locking Force: 350 metric tons Fpelhov D Dwpocdw Dog Tie Bar Diameter: 125 mm Clearance Between Tie Bars: 579 x 579 mm Die Thickness (Minimum - Maximum): 300 - 700 mm Die Stroke: 420 mm Moving Platen Size: 940 x 940 mm Injection Position: -125 mm Power Requirement: 22 kW Machine Weight: 11,974 kg (26,400 pounds) Sold with trimming press and manipulator.

Condition: like new (used), Year of construction: 2000, machine/vehicle number: 32577, Automated high-pressure die casting machine Bühler. 7900 kN clamping force. 500 mm plunger stroke Air conditioning KMA / Bentleon type Ultravent / AFS 6000 (2000) Felhcdwefbl E Sj Djpg The machine is DISMANTLED. Has been repainted recently.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 10306675, type of input current: three-phase, input voltage: 400 V, clamping force: 8,400 kN, input frequency: 50 Hz, Horizontal die casting machine Manufacturer: Bühler, Model: SC D/84, Year: 1999 Serial number: 10306675 Max. locking force: 8,400 kN Cycle time: 30 s Fjlhcdjynh Dlew Dopg Casting piston speed: 5.0 m/s Including Gerlieva GS 1200/1400Z mould spraying unit Including Westomat W900SLDG 900kg holding furnace Including ABB IRS5 45kg extraction robot

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 10499123, clearance between the columns: 780 mm, column diameter: 150 mm, ejector force: 225,000 N, ejector stroke: 175 mm, mold height (min.): 360 mm, type of input current: three-phase, input voltage: 400 V, clamping force: 6,615 kN, input frequency: 50 Hz, Horizontal Die Casting Machine Make: Bühler, Model: GKS EVO B66D, Year: 2011 Serial number: 10499123 Fjlhcdwsynhzko Dopg Mold height: 360 - 900 mm Mold opening stroke: 800 mm Max. surface pressure: 100 N/mm² Min. clamping dimensions: 620 x 620 mm Clear tie bar distance: 780 x 780 mm Tie bar diameter: 150 mm Ejector stroke: 175 mm Ejector force: 150 kN Max. clamping force: 6615 kN Cycle time: 30 s Plunger speed: 5.0 m/s Incl. mold spraying unit Gerlieva GS 1000/1400Z Incl. holding furnace Westomat ProDos DPC 900kg Incl. extraction robot ABB IRB4400

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 10298440, clearance between the columns: 640 mm, column diameter: 125 mm, ejector force: 150,000 N, ejector stroke: 145 mm, mold height (min.): 300 mm, type of input current: three-phase, input voltage: 400 V, clamping force: 4,200 kN, input frequency: 50 Hz, Horizontal die casting machine Make: Bühler, Model: SC D/42, Year: 1998, Serial number: 10298440 Mold height: 300 - 750 mm Mold opening stroke: 640 mm Max. surface pressure: 100 N/mm² Min. clamping dimensions: 500 x 500 mm Clear tie bar distance: 640 x 640 mm Tie bar diameter: 125 mm Ejector stroke: 145 mm Ejector force: 150 kN Max. clamping force: 4200 kN Fpsljyngyfjhcdw Deg Cycle time: 30 s Plunger speed: 5.0 m/s Incl. die spraying unit Gerlieva GS 1200/1400Z Incl. holding furnace Westomat ProDos DPC 900kg Incl. extraction robot ABB BUHL ROB 46002004

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 10380840, clearance between the columns: 640 mm, column diameter: 125 mm, ejector force: 150,000 N, ejector stroke: 145 mm, mold height (min.): 300 mm, type of input current: three-phase, input voltage: 400 V, clamping force: 4,200 kN, Horizontal die casting machine Make: Bühler, Model: Evolution B42D, Year: 2004, Serial number: 10380940 Mould height: 300 - 700 mm Mould opening stroke: 640 mm Max. surface pressure: 100 N/mm² Min. clamping plate dimensions: 500 x 500 mm Clear tie bar spacing: 640 x 640 mm Tie bar diameter: 125 mm Ejector stroke: 145 mm Ejector force: 150 kN Max. closing force: 4200 kN Cycle time: 30 s Folhceyngv Tedw Depg Casting piston speed: 5.0 m/s Incl. die spraying system Gerlieva GS 1200/1400Z Incl. holding furnace Westomat ProDos DPC 900kg Incl. extraction robot ABB IRB 4600 M2004

Condition: new, Year of construction: 2020, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm lock stroke 230 mm ejector stroke 70 mm capacity of ejector 40 kN height of form 120-350 mm Column diameter 56 mm casting capacity 54 kN Injection stroke 130 mm injection piston diameter 45, 50, 55 mm Casting volum 109. 150, 194 cm³ volume cast pressure 339. 274, 226 daN/cm² Casting area 176, 218, 264 cm² weight of the machine ca. 3,5 t Equipment of the machine 1.0.1 Cover for drop through area at the subframe 1.0.2 Cover for drop through area at the subframe with scale/chute 1.1.0 Motorized guard in casting direction left 1.4.0 Machine positioning mounting pads 1.5.4 Machine interior illumination 1.11.0 Convenience package energy efficiency 2.0.1 Ejector assistance packages 2.4.2 Securing of ejector platen 2.6.4 Machine assistance system SensiLock 2.8.0 Hydraulic adjustment of locking unit for shot positioning 3.1.1 Nitrogen pressure control for piston accumulator 3.2.4 Multi-Chamber furnace with pump 3.2.5 Isolated Cover for Crucible Multi-chamber-furnace 3.4.4 Prefilling process 3.4.5 Simplified piston removal 3.4.6 Piston stop during return stroke 3.5.2 Electric nozzle and gooseneck heating (extended version) 4.5.0 Shut-off facility for hydraulic locking and injection unit 4.6.1.2 Integrated water circuit 2+4 circuits 5.1.0 Machine control DATADIALOG - Realtime Control (RC) 5.1.2 Convenience Package – Casting – 5.2.1 Ejector Pressure graphics in DATADIALOG control 5.4.1 Data logging Scope 5.4.2 Configurable In- and Outputs 5.6.0 Special cable lengths 6.1.3.1 Digital interface for Non-FRECH extractor (Dispo 10) 6.1.4 Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.3.1.1 Hanging operating desk with monitor Fpslhcdoiu Smbew Deg 6.5.2 Service Package RSD with Switch for each additional machine 7.2.2.2 Spraymotion 611 E with servo drive, 1-circuit 7.2.10 Extended spraying program for spraymotion 7.3.1 Lubricant container TD 20 7.4.0.2 Spray rail CR 245 7.12.3 Low noise chute

Condition: new, Year of construction: 2018, pan capacity 420 kg Single-Chamber Meltec Furnace Typ Z20/120C unused as new for DAW20A or DAW20S with stainless steel crucible. Fpslhcdstv Rlzow Dog Crucible content 420kg/Zn. Melting capacity 120kg/Zn/h Electrical Connection 21,5kW With control cabinet.

Condition: new, Year of construction: 2025, closing pressure 240 kN clamping plate 380x380 mm distance between columns 250x250 mm weight of the machine ca. 3,0 t lock stroke 180 mm capacity of ejector 28 kN ejector stroke 50 mm height of form 120-300 mm column diameter 45 mm casting capacity 43 kN casting plunger stroke 85 m/m injection plunger diameter 36,40,45 mm casting volume (DIN 24480) 47,63,87 cm ³ volume cast pressure 420,340,270 da/cm² casting area 56,70,88 cm 2 Traverse Stroke 150 m/m Equipment of the machine 1.0.2 Cover for drop through area at the subframe with scale/chute 1.0.3 Cover for small parts in the subframe Fjlhcdox Hp E Ajw Dspg 1.1.0 Motorized guard in casting direction left 1.4.0 Machine positioning mounting pads 1.5.4 Machine interior illumination 1.11.0 Convenience package energy efficiency 2.0.1.2 Ejector function package "Technology" including SensiEject 2.6.4 Machine assistance system SensiLock 2.8.0 Hydraulic adjustment of locking unit for shot positioning 3.0.1.2 Casting assistance package Technology including SensiInject 3.2.9 EcoMelTec multi-chamber furnace with pump (surcharge) 3.4.4 Prefilling process 3.4.5 Simplified piston removal 3.4.6 Piston stop during return stroke 3.5.2 Electric nozzle and gooseneck heating (extended version) 3.5.3 Plug-in connections for electric nozzle and gooseneck heating 4.5.0 Shut-off facility for hydraulic locking and injection unit 4.6.1.2 Integrated water circuit 2+4 circuits 5.1.0 Machine control DATADIALOG - Realtime Control (RC) 5.1.5 Maintenance plus package 5.6.0 Special cable lengths 6.1.3.1 Wired signal interface for extraction device (DISPO 010) 6.1.4 Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.1.5 Interface for Vacuum unit 6.3.1.1 Hanging operating desk with monitor 6.5.2 Service Package RSD with Switch for each additional machine 7.2.1.2 Spraymotion 411 E with servo drive 7.2.10 Extended spraying program for spraymotion 7.3.1 Lubricant container TD 20 7.4.0.1 Spray rail CR 155

Condition: used, Year of construction: 1995, closing pressure 2200 kN clamping plate 755x755 mm Felhcdwsvxlufs Dopg distance between columns 500x500 mm weight of the machine ca. 8 t lock stroke 430 mm capacity of ejector 110 kN ejector stroke 100 mm height of form 250-600 mm column diameter 85 mm casting capacity 130 kN casting plunger stroke 175 mm injection plunger diameter 70,80,90 mm casting volume (DIN 24480) 450,636,856 cm ³ volume cast pressure 335,260,203 kp/cm² casting area 656,846,1078 cm 2 Traverse Stroke 230 mm Used Die Casting machine DAW 200 S with Datavario control for the use of zinc alloys. Available in accordance Recommendation from the manufacturer is general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: used, Year of construction: 2007, used electric sprayer Spraymotion 411 E for die casting machines. The device has been tested by the manufacturer for function Felhcdstwfknow Djpg Included support unit and spray- and blowrail (system SR) Connection 24 pin plug electric driving unit with 400mm stroke length

Condition: new, Year of construction: 2024, closing pressure 900 kN clamping plate 540x540 mm distance between columns 350x350 mm weight of the machine ca. 5,3 t lock stroke 280 mm capacity of ejector 61 kN ejector stroke 70 mm height of form 160-400 mm column diameter 65 mm casting capacity 78 kN casting plunger stroke 130 m/m injection plunger diameter 50,55,60 mm casting volume (DIN 24480) 147, 191, 241 cm 2 volume cast pressure 396, 327, 275 da/cm² casting area 226, 274, 326 cm 2 Traverse Stroke 220 m/m Equipment of the machine 1.0.2Cover for drop through area at the subframe with scale/chute 1.1.0Motorized guard in casting direction left 1.4.0Machine positioning mounting pads 1.5.4Machine interior illumination 1.11.0Convenience package energy efficiency 2.0.1Ejector assistance packages 2.6.4Machine assistance system SensiLock 2.8.0Hydraulic adjustment of locking unit for shot positioning 3.0.1Casting assistance package Basic 3.2.9 EcoMelTec multi-chamber furnace with pump (surcharge) 3.4.4Prefilling process 3.4.5Simplified piston removal 3.4.6Piston stop during return stroke 3.5.2Electric nozzle and gooseneck heating (extended version) 3.5.3 Plug-in connections for electric nozzle and gooseneck heating 4.5.0Shut-off facility for hydraulic locking and injection unit 4.6.1.3Integrated water circuit 2+6 circuits 5.1.0Machine control DATADIALOG - Realtime Control (RC) 5.1.5Maintenance plus package 5.6.1Special cable lengths 6.1.3.1Digital interface for Non-FRECH extractor (Dispo 10) 6.1.4Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.1.5 Interface for Vacuum unit 6.3.1.1Hanging operating desk with monitor 6.5.2Service Package RSD with Switch for each additional Fpelhjr Hwf Aocdw Dsg machine 7.2.2.2Spraymotion 611 E with servo drive, 1-circuit 7.2.10Extended spraying program for spraymotion 7.3.1Lubricant container TD 20 7.4.0.3Spray rail CR 275

Condition: used, Year of construction: 1994, closing pressure 600 kN clamping plate 460x460 mm Folhcdwstuxmys Dopg distance between columns 300x300 mm weight of the machine ca. 4,5 t lock stroke 230 mm capacity of ejector 40 kN ejector stroke 70 mm height of form 120-350 mm column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 without control and equipment. As a basic machine for general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: new, Year of construction: 2025, All stainless steel Tumbler Mixer - quick delivery of one machine Fslhcsif Upfodw Depg Manufactured new to order Stainless steel drum in high grade 316 stainless steel Variable speed drum from zero to 24 rpm Electric tipping discharge Capacity 50 Kg to 90 Kg according to product type 2 x Models

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, working width: 1,060 mm, sheet thickness (max.): 150 mm, total length: 2,640 mm, total width: 1,905 mm, total height: 2,090 mm, overall weight: 3,200 kg, table width: 1,060 mm, workpiece height (max.): 150 mm, power: 25.2 kW (34.26 HP), input current: 52 A, The budget-friendly entry-level model, yet equipped with all necessary functionalities. Felhcey Icrrsdw Dopg With a working width of up to 1060 mm, the machine combines deburring, edge rounding, and removal of laser oxide in a single pass. • Table width 1060 mm • Maximum workpiece height 150 mm • Deburring and edge rounding in one pass • Abrasive belt • 2 x 2 top brushes • Pressure rollers before and after each unit Operator-friendly control via touchscreen. Ex-showroom machine!

Condition: new, Unused bin washer. Bought for a contract which never materialised. Fpelhetpv T Njcdw Djg

Condition: like new (used), Year of construction: 2023, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: IX-GN-4044-S, input voltage: 230 V, working width: 900 mm, total width: 1,000 mm, total length: 2,200 mm, total height: 1,100 mm, air pressure: 6 bar, control voltage: 230 V, ⚙️ Included: • Full conveyor systems • Integrated reject systems ( air reject ) • Stainless steel food-grade construction • Touchscreen control panels 2 off left hand - 3off right hand units , Full production capacity 60-70k per hour ✅ Condition: • Recently removed from production • Fully operational prior to removal • Clean, well-maintained units • Matching set (ideal for line integration or multi-site use) 💡 Ideal For: • Ready meal manufacturers • Meat / poultry processors • Bakery & snack producers • Food contract packers Detects Glass / Plastic / Wood any foreign bodies 📦 Sale Options: Fpolhjyyl Aqjcdw Djg • Available individually or as a complete package • Priority given to bulk buyers 🌍 Additional Information: • Available for UK and international buyers • Assistance with loading and logistics can be arranged • Viewing can be organised by appointment 💰 Price: Can be discussed on appointment / via email / phone (Discount available for multi-unit purchase) 📩 Contact: Craig Conway Conways Engineering Ltd Please get in touch for: • Additional photos • Full specifications • Video / demonstration • Bulk purchase enquiries Viewings Welcome for full demonstration

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, working width: 150 mm, feed rate X-axis: 6 m/min, sheet thickness (max.): 200 mm, working height: 200 mm, Long sheet metal parts up to 150 mm wide, box sections, rectangular tubes, and strips. Deburring, edge rounding, and finish grinding. Fpslhcdwjy D Nh Ej Dsg Abrasive belt unit (K) TopBrush unit (2TB) Working width: 150 mm Ex-showroom machine!

Condition: new, Year of construction: 2026, functionality: fully functional, Our honeycomb heater plates are manufactured and assembled to Clako’s own unique design. 1 Zone, 2 Zone + 4 Zone Heater Plates are manufactured by our own engineer to fit your Cylinder, Platen, Saroglia and Clamshell machines. Strong, durable & available in high grade hardened steel or lightweight toughened aluminium to suits your needs. All of our honeycomb plates are machined to true flatness. Dies (cliches) secure to our plates using low height toggles. Fslhcdwsyznu Se Djpg Contact our team for details and price.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: SOLD, type of input current: three-phase, total height: 2,200 mm, warranty duration: 12 months, temperature: 200 °C, New Newfoil NM3534 Machine Working width: 340 mm Fpjlhcdoxt N H Dew Djg Printing area: 310x270 mm Die-cutting area: 310x270 mm 18,000 impressions per hour

Condition: used, Year of construction: 2010, The Maximum Machines UG PSV 600, manufactured in 2010, is a machine with a format of 600 mm. It is currently in stock and located in Germany. This pressing unit with a vertical stacker is PLC-controlled and features automatic shingle control, multiple counters, and a batch counter. It offers better information through the PLC display, easier setting, and enhanced efficiency with a stronger pressing unit. Additionally, it is equipped for 2-up operations. The delivery terms are FCA. Format: 600 mm Equipment: PSV 600 - Pressing unit with vertical stacker basics: plc-controlled - automatic shingle control - multiple counters better informations by plc-display - easier setting - more efficiency Fpjlhovfxx Dscdw Deg Stronger pressing unit - batch counter - 2-up-equipment