Used Die-Casting Machine for sale (67,061)

Condition: used, Year of construction: 1997, functionality: fully functional, clearance between the columns: 480 mm, total height: 2,040 mm, total width: 1,750 mm, stroke length: 460 mm, total length: 5,177 mm, column diameter: 90 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 9,500 kg, clamping force: 2,000 kN, power: 18 kW (24.47 HP), input frequency: 50 Hz, Equipment: documentation/manual, We are offering this used Italpresse IP 200 SC die-casting machine, manufactured in 1997. Type: IP 200 SC Manufacturing number: 2449 Year of manufacture: 11.1997 Wiring diagram no.: 147081052 Operating voltage: 400 V Mains frequency: 50 Hz Auxiliary power supply: 110VAC–24VDC Control voltage inputs: 24 VDC Control voltage outputs: 24 VDC Power consumption: 18 kW Installed power: 23 kW Enclosure protection class: IP55 Hydraulic pump: Vickers 4525V42A17 – 86DD 22R Pressure accumulator TÜV certificate: Last inspection in 2018, next inspection due on 01.08.2028. In recent years, extensive investments have been made in the technology to ensure reliability: 2024: Installation of a new column including nut. 2023: Replacement of various wear parts (column wiper, slide rails/slide shoes including wiper) as well as complete seal kits for the closing cylinder and multiplier. 2021: Installation of new pump inserts for high and low pressure. The machine will be sold including a Gauss VS1 dosing unit with a separate, compact control panel and a gas-operated melting furnace with a 200-liter crucible and a Hindenlang gas burner (type HO-3). Original manual and complete electrical and pneumatic diagrams are available. Prsdpfxezlw N Rj Adzoa The machine is currently still in active production. Since it is in operation, the operating hours cannot be read exactly, but an inspection under power is possible at any time by arrangement. The machine will be disconnected at the end of September / beginning of October. If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2008, machine/vehicle number: 311504, equipped with melting and holding furnace STRIKO WESTOFEN W900SL Prodos XP, year of manufacture: 2008, serial number: 10406, furnace chamber volume: 8290 dm³, unladen weight: 3,200 kg, heating capacity: 22 kW, handling robot SPESIMA Gripmat 2, year of manufacture: 2008, serial number: 210430, machine weight: 1,400 kg, casting automation, spray unit, articulated chain conveyor, length: approx. 350 cm, conveyor width: approx. 100 cm, protective enclosure, control system, machine platform, injection unit defective. Prjdpfxezhax Hs Adzoa

Condition: used, Year of construction: 2004, machine/vehicle number: 257253, Clamping force: 13,000 kN, total weight: 69,000 kg, including spraying unit WOLLIN, deburring press REIS TKP3, serial number: 181013, year of manufacture: 2004, weight: 680 kg, industrial robot REIS V60, serial number: 541010, year of manufacture: 2004, machine weight: 1,950 kg, melting and holding furnace STRIKO WESTOFEN W1200SL Pro, year of manufacture: 2004, serial number: 7961, furnace chamber volume: 970 dm³, empty weight: 3,100 kg, heating capacity: 22 kW, machine out of service, not ready for operation. Prsdpfxjzhaydj Adzoa

Condition: used, Year of construction: 1992, machine/vehicle number: 6597, Revision status: 2005, clamping force: 320 tons, melting and holding furnace DOGUS MACHINE EMHF-300/45, year of manufacture: 2020, heating capacity: 45 kW, diameter: 1,320 mm, height: 1,500 mm, casting automation, spray device WOLLIN LSC1, year of manufacture: 2014, serial number: 1009. Pjdpozhaykjfx Adzsra

Condition: used, Year of construction: 1996, machine/vehicle number: 7037, equipped with an ABB IRB6400F removal robot, year of manufacture: 1997, serial number: 1318, inventory number: 073005700, WOLLIN spray unit, casting automation, control system, touch panel, cooling tank, machine platform, belt conveyor, 1 ABB industrial robot as a spare parts dispenser. Prjdpfx Adezhax Tjzsa

Condition: ready for operation (used), Year of construction: 1996, Clamping force: 3150kN, opening force: 10,000daN, closing stroke: 500mm, ejector force/retraction force: 159/82kN, ejector stroke: 120mm, mould height: 300-700mm, platen dimensions: 900x900mm, tie bar spacing: 550x550mm, tie bar diameter: 110mm, injection position: mm, max. injection force: 350kN, injection stroke: 430mm, injection plunger diameter: 50/60/70/80mm, shot volume: 563/811/1103/1441cm³, specific injection pressure: 1783/1238/909/696daN/cm², corresponding projected area: 177/254/347/453cm², max. projected area: 1050cm² at 300daN/cm², operating pressure: 140bar, dry cycle time (DIN 24480): 500, drive motor: 22kW, control: Datacontrol, length: 6900mm, width: 2000mm, height: 2800mm, weight: 14t, operating hours: 77,185h, shot count: at least 1,147,108, however not guaranteed due to a hardware replacement, adjustable opening stroke, with Striko Westofen W455 holding furnace, ABB IRB 2400 (M96/F10) industrial robot, and documentation. An on-site inspection is possible. Podpfx Asza E Rmsdzsra

Condition: used, Year of construction: 2017, workpiece weight max. 2000 g used weightcontrol WC2000 for die casting machines up to a unit weight of 2000 grams. The device has been checked and repaired by the manufacturer Pjdpjy Diausfx Adzjra

Condition: good (used), Horizon RD-4055 Rotary Die Cutting Machine The machine is in perfect condition, has low mileage, and is ready to work. Machine setup is via the control panel. Made in Japan. The set consists of: – FFU-4055 sheet feeder – RD-4055 rotary die cutter with double magnetic cylinder (top and bottom) – SPC-4055 separator Manufacturer’s description: – Cost reduction thanks to multiple die reuse, – Machine operation via TOUCH & WORK touchscreen, – Short machine setup time, – Precision and excellent final product quality, – Very easy and quick die assembly on the magnetic cylinder Technical data: Prjdpfx Aszur Hpodzsa – Maximum sheet size before processing: 400 x 550 mm – Minimum sheet size before processing: 200 x 275 mm – Processed material: standard paper, coated paper, and cardboard – Material thickness: 188 to 400 g/m² – Feeder stack height: 500 mm – Production speed: 6,000 cycles per sheet hour Factory set of tools and accessories, instructions.

Condition: used, Year of construction: 2012, machine/vehicle number: A0100-80069, functionality: fully functional, operating hours: 4,660 h, Equipment: documentation/manual, We are offering this used Hennecke ELASTOLINE F elastomer casting machine, year of manufacture 2012. The machine is in good used condition. Prjdpex R Thcefx Adzoa If you have any questions or require further information, please write to us or give us a call.

Condition: used, Year of construction: 1994, functionality: limited functionality, Used Oskar Frech DAW 125 with control cabinet and crucible Podpfx Aewywn Ejdzera

Condition: new, Year of construction: 2023, Electric furnace MELTEC Typ ZC80/180F ECO V2 incl. iron steel crucible, isolated coverand substructure. Without control cabinet (can be ordered aditionally) The EcoMelTec furnace combines the advantages of the proven multi chamber furnace with many new functions for double savings. New functions help to optimize the handling of the casting process just as: - Good accessibility for cleaning purposes via flexibly mountable flap cover - New pump design enables longer cleaning intervals - Storage for slag container - facilitates cleaning the melt bath - Symmetrical furnace design - no right-hand/left-hand version required Pedpfoy E Tyhsx Adzera Crucible content: 820,0 kg/Zn Melting capacity: 180,0 kg/Zn/h Electrical connection: 27,0 kW Type: ZC 80/180 F ECO V2 suitable for DAW 80F and W80Zn

Condition: repair required (used), Year of construction: 2001, functionality: not functional, FRECH DAK 720-71 RC Die-Casting Machine, used Podpfxowc Tdzs Adzora Machine number 440403, clamping force 8,000 kN, clamping stroke 825 mm, ejection force 364 kN, ejection stroke 180 mm, mould height 350 to 1,000 mm, clamping platens 1,300 x 1,300 mm, tie bar spacing 825 mm, tie bar diameter 180 mm, maximum casting force 713 kN, casting stroke 600 mm, casting piston diameter 70 to 120 mm, casting volume 1,539 to 4,523 cm³, operating pressure 160 bar, drive motor 45 kW, equipped with MELTEC AVDF 1200/5000 dosing furnace, year 2017, serial number System sold as a donor for spare parts Technical details: Dimensions (L x W x H): approx. 8,000 x 7,500 x 3,500 mm Weight: approx. 36,000 kg Year of manufacture: 2001

Condition: new, Year of construction: 2022, Electric furnace MELTEC Typ ZC20/120F ECO V2 incl. iron steel crucible, isolated coverand substructure. Without control cabinet (can be ordered aditionally) The EcoMelTec furnace combines the advantages of the proven multi chamber furnace with many new functions for double savings. New functions help to optimize the handling of the casting process just as: - Good accessibility for cleaning purposes via flexibly mountable flap cover Prsdey E Tybopfx Adzoa - New pump design enables longer cleaning intervals - Storage for slag container - facilitates cleaning the melt bath - Symmetrical furnace design - no right-hand/left-hand version required Crucible content: 420,0 kg/Zn Melting capacity: 120,0 kg/Zn/h Electrical connection: 21,5 kW Type: ZC 20/120 F ECO V2 suitable for DAW 20F and W20Zn

Condition: new, Year of construction: 2020, Electric furnace MELTEC Typ ZC50/180 TOC incl. iron steel crucible, isolated coverand substructure. Without control cabinet (can be ordered aditionally) Electric heating with heating elements. Transfer of melt below bath level from melting to casting chamber by pump to provide constant bath level together with shot to shot consistency. Pedpfsy E Tynex Adzsra Crucible content: 820,0 kg/Zn Melting capacity: 180,0 kg/Zn/h Electrical connection: 27,0 kW Type: ZC 50/180 TOC suitable for DAW 50F and W50Zn

Condition: good (used), ML-720 Die Cutting Machine This machine is used to cut shapes from a die (die) from materials such as paper, cardboard, leather, plastics, etc. The machine is ready for operation, after a service inspection. Format: 720 x 510 mm Weight: 1800 kg Power supply: 380 V Motor: 2.2 kW Equipment: Prsdjzlahijpfx Adzsa – Electromagnetic clutch and brake – Quick-mount frame – 3 operating modes: continuous, time-delayed, manual – Central pressure lubrication – Safety guards – Operating tools and instructions with documentation.

Condition: like new (used), Year of construction: 2000, machine/vehicle number: 32577, Automated high-pressure die casting machine Bühler. 7900 kN clamping force. 500 mm plunger stroke Air conditioning KMA / Bentleon type Ultravent / AFS 6000 (2000) Prodpefbl E Sjfx Adzea The machine is DISMANTLED. Has been repainted recently.

Condition: like new (used), Year of construction: 1995, machine/vehicle number: 10262342, Automated high pressure die casting machine Bühler. 9800 kN clamping force. Machine is DISMANTLED Pedpjfbl Ensfx Adzora

Condition: good (used), Heidelberg Cylinder S 54×72 Automatic Die-Cutting Machine This machine is in production and ready to go. Format: 540x720mm The machine is ready for die-cutting. Fully automatic, central lubrication. Pedpfx Adezv Niqjzera Includes mounting frame, cylinder plate, carriages, and a set of fillers and locks.

Condition: good (used), Year of construction: 2005, operating hours: 25,000 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 315 mm, workpiece weight (max.): 500 kg, workpiece length (max.): 576 mm, workpiece width (max.): 400 mm, table load: 500 kg, Equipment: documentation/manual, We are offering this well-maintained Zimmer+Kreim 600 wire EDM machine, manufactured by Zimmer&Kreim in 2005, for sale. Pedpfxszufdzj Adzjra Manufacturer: Zimmer+Kreim Model: 600 Year of manufacture: 2005 Condition: good Category ID: 1901 Type ID: 1429 Machine type: Wire EDM machine Zimmer&Kreim If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Simplacutter model IV 110×160 Cauhe die cutter The machine is fully operational, like new. Made in Spain. Frame size: 1100×1600 mm Sheet size: 1160×1680 mm Weight: 8500 kg Power supply: 380 V Installed power: 7.5 kW Prodpfxozmu I To Adzea Impact force: 350 t Equipment: – pneumatic clutch and brake – control panel – two frames – 2 operating modes: time-delayed, manual – central lubrication – additional safety guards – safety pressure mats – operating tools – hard sheet metal

Condition: used, Year of construction: 1973, functionality: fully functional, machine/vehicle number: M14L/9094, Offer Number: M14L/9094 Machinetype: thread rolling machine - flat die Make: MENN Type: GW32 Constr. year: 1973 diameter range: 1,6-4 mm shaft length under head: 50 mm max. thread length: 30 mm output pieces/min: 300-750 Prjdpjzwqh Refx Adzoa Location: In our warehouse

Condition: used, Year of construction: 2000, closing pressure 900 kN clamping plate 540x540 mm distance between columns 350x350 mm weight of the machine ca. 5,5 t lock stroke 280 mm capacity of ejector 60 kN ejector stroke 70 mm height of form 160-400 mm column diameter 65 mm casting capacity 75 kN casting plunger stroke 130 m/m injection plunger diameter 50,55,60 mm casting volume (DIN 24480) 119, 163, 214 cm 2 volume cast pressure 380, 315, 265 kp/cm² casting area 236, 285, 340 cm 2 Traverse Stroke 150 m/m General overhauled Die Casting machine DAW 80 GO with DataLogic control for the use of zinc alloys. Excerpt from the overhaul: · Upgrade of the machine with new control cabinet and operator panel including new electric machine installation · Renewal of the hydraulic system (blocks and valves) Prodeyzt D Espfx Adzoa · locking unit overhaul Details available upon request The machine is equipped with the following options: Front door motorized, rear door manual handling Cover for drop through area at the subframe Hanging operating desk with monitor 1.0.2 Cover for drop through area at the subframe with scale / chute 3.2.4 Multi-chamber furnace with pump TOC 3.2.1 furnace control cabinet 4.0.1 Hydraulic system for water glycol 6.1.3.1 Wired signal interface for extraction device (DISPO 010) 6.5.2 Equipment package, Remote Service Dialog (RSD) with switch 7.2.2.2 Spraymotion 611 E with servo drive 7.3.1 Lubricant container TD 20 7.4.0.3 Spray rail CR 275 Other options can be offered upon request

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, total height: 4,700 mm, ram adjustment: 100 mm, installation height: 550 mm, table height: 1,200 mm, total width: 1,700 mm, total length: 2,700 mm, table length: 2,100 mm, table width: 1,000 mm, pressing force: 200 t, control cabinet height: 2,245 mm, control cabinet width: 2,400 mm, input voltage: 400 V, distance between side stands: 520 mm, distance between stands: 2,100 mm, overall weight: 48,000 kg, year of last overhaul: 2025, input frequency: 50 Hz, ZEULENRODA Punching and Forming Machine - Cast Iron Version - HR 200-2000 NL The punching machine is sustainably manufactured as a new machine, using carefully inspected, reusable cast iron components (table, headstock, and side supports). Press ram newly manufactured in a vibration-damping cast iron design. Drive system with a compact drive unit and a 2-connecting rod power transmission. • Total pressing force 200 t • Stroke rate 30...120 min-¹ • Working capacity 29 kNm • Ram adjustment 100 ±0.01 mm • Ram stroke, adjustable 30 - 150 mm • Press force monitoring • Hydraulic overload protection Podszu Avbepfx Adzora • Main control panel + Two-hand control panel • Hardware and software interface for strip lubrication / roller feed / strip coiler • Control system SIEMENS S7-1500 • Remote maintenance

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, clearance between the columns: 640 mm, closing stroke: 640 mm, total height: 2,500 mm, total width: 2,400 mm, stroke length: 480 mm, total length: 7,500 mm, column diameter: 120 mm, ejector force: 240,000 N, ejector stroke: 145 mm, mold height (min.): 250 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 16,600 kg, clamping force: 4,600 kN, power: 31.5 kW (42.83 HP), workpiece weight (max.): 8 kg, pressure: 160 bar, Equipment: documentation/manual, BÜHLER GDM H-400B Version 6.0 – 460T Complete die casting cell for aluminum with automatic mold spraying and automatic pouring ladle Manufacturer BÜHLER Model GDM H-400B Version 6.0 Year of manufacture 1996 Condition The machine is complete, in good working order, and has been regularly operated. It can be inspected while running after prior arrangement of a viewing date. Description We offer for sale a complete aluminum die casting cell based on the renowned BÜHLER GDM H-400B Version 6.0 injection molding machine with a clamping force of 460 tons. BÜHLER has been recognized for many years as one of the most reputable manufacturers of die casting machines in the world. The GDM H-400B model is a proven design, known for its high durability, precision, and low operating costs. The machine offered is sold as a complete production cell including an injection molding machine, an automatic mold spraying system, and an automatic pouring ladle. This configuration allows for efficient and repeatable production of aluminum castings. The offer includes: Die casting machine BÜHLER GDM H-400B Version 6.0 Year of manufacture: 1996 Clamping force: 4600 kN (460 tons) DATACESS control Complete control cabinet Technical documentation Automatic mold spraying system ACHESON Dog1000FCT.1S-A Year of manufacture: 2000 Automatic lubrication and mold cooling Power supply: 3 × 400 V Control: 24 V DC The system ensures uniform application of the release agent, improves the surface quality of the castings, and reduces the production cycle time. Automatic pouring ladle Equipped with: Siemens SIMATIC HMI Touch control The unit automatically picks up molten metal from the furnace and dispenses the appropriate amount of aluminum into the injection chamber, ensuring high process repeatability and reducing material losses. Prodpfx Adjzg E Rfszea Technical data of the injection molding machine Clamping unit Clamping force: 4600 kN Second-stage clamping force: 180–420 kN Moving platen stroke: 640 mm Ejector force: 240 kN Ejector stroke: 145 mm Mounting plates Fixed platen: 990 × 1165 mm Moving platen: 990 × 990 mm Distance between columns: 640 × 640 mm Column diameter: 120 mm Molds Minimum mold height: 250 mm Maximum mold height: 780 mm Injection unit Piston stroke: 480 mm Effective piston stroke: 455 mm Available piston diameters: 60–110 mm Maximum aluminum casting weight: up to 8.5 kg Maximum injection pressure: up to 1485 bar Hydraulic system Maximum working pressure: 160 bar Oil tank capacity: 850 liters Electrical parameters Connected power: 31.5 kW Protection class: IP55 Dimensions Footprint: 7.5 × 2.4 m Height: 2.5 m Weight: 16,600 kg Key advantages ✔ Renowned BÜHLER brand ✔ Clamping force of 460 tons ✔ Complete production cell ✔ Automatic ACHESON mold spraying ✔ Automatic pouring ladle ✔ Siemens SIMATIC HMI control ✔ Complete technical documentation ✔ High production efficiency and repeatability ✔ Possibility of producing medium and large aluminum castings Application The machine was operated in a production facility and is offered as a complete workstation. It can be inspected and its technical condition verified after prior arrangement of a viewing date. Availability The machine is available immediately. Loading and transportation arrangements can be made within Poland and throughout Europe.

Year of construction: 1995, condition: good (used), ARD EDM diesinking machine offered. Prodpfshktttjx Adzea Type: M 50 F Control unit: ARD system Facile A X-travel: 310 mm Y-travel: 200 mm Z-travel: 200 mm Bed: 360 x 600 mm Power: 5,5 KVA Spindle type: System 3R Spindle stroke: 200 mm Year: 1995 Dimensions: 150x135x210 cm LxWxH For more information call us or send an e-mail.