Used Casting for sale (1,784)

Condition: used, Year of construction: 1992, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t lock stroke 230 mm capacity of ejector 40 kN ejector stroke 70 mm height of form 120-350 mm column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m Nwodpfx Aaofrvzve Esr injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 with SBC 2 control for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MO50E and used pneumatic sprayer 401. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: like new (used), Year of construction: 2000, machine/vehicle number: 32577, Automated high-pressure die casting machine Bühler. 7900 kN clamping force. Nwodofbl E Sjpfx Aa Esr 500 mm plunger stroke Air conditioning KMA / Bentleon type Ultravent / AFS 6000 (2000) The machine is DISMANTLED. Has been repainted recently.

Condition: used, Year of construction: 1995, closing pressure 2200 kN clamping plate 755x755 mm distance between columns 500x500 mm weight of the machine ca. 8 t lock stroke 430 mm capacity of ejector 110 kN ejector stroke 100 mm height of form 250-600 mm Nedovxlufspfx Aa Eswr column diameter 85 mm casting capacity 130 kN casting plunger stroke 175 mm injection plunger diameter 70,80,90 mm casting volume (DIN 24480) 450,636,856 cm ³ volume cast pressure 335,260,203 kp/cm² casting area 656,846,1078 cm 2 Traverse Stroke 230 mm Used Die Casting machine DAW 200 S with Datavario control for the use of zinc alloys. Available in accordance Recommendation from the manufacturer is general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: like new (used), Year of construction: 1995, machine/vehicle number: 10262342, Automated high pressure die casting machine Bühler. 9800 kN clamping force. Nwjdpfx Asfbl Enoa Ejr Machine is DISMANTLED

Condition: used, Year of construction: 1994, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t lock stroke 230 mm capacity of ejector 40 kN Nwjdpstuxmyefx Aa Eer ejector stroke 70 mm height of form 120-350 mm column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 without control and equipment. As a basic machine for general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: used, Year of construction: 1997, functionality: fully functional, clearance between the columns: 579 mm, casting force: 350 N, stroke length: 420 mm, column diameter: 125 mm, overall weight: 12,000 kg, power: 22 kW (29.91 HP), Locking Force: 350 metric tons Tie Bar Diameter: 125 mm Clearance Between Tie Bars: 579 x 579 mm Die Thickness (Minimum - Maximum): 300 - 700 mm Die Stroke: 420 mm Moving Platen Size: 940 x 940 mm Injection Position: -125 mm Nwodpfsv D Dwpox Aa Eor Power Requirement: 22 kW Machine Weight: 11,974 kg (26,400 pounds) Sold with trimming press and manipulator.

Condition: used, Year of construction: 2007, used electric sprayer Spraymotion 411 E for die casting machines. The device has been tested by the manufacturer for function Included support unit and spray- and blowrail (system SR) Connection 24 pin plug Nsdpjtwfknefx Aa Eewr electric driving unit with 400mm stroke length

Condition: new, Year of construction: 2018, pan capacity 420 kg Single-Chamber Meltec Furnace Typ Z20/120C unused as new for DAW20A or DAW20S with stainless steel crucible. Crucible content 420kg/Zn. Melting capacity 120kg/Zn/h Electrical Connection 21,5kW Nedpotv Rlzefx Aa Eowr With control cabinet.

Condition: new, Year of construction: 2024, closing pressure 2200 kN clamping plate 755x755 mm Nsdpfx Aovvx Hcea Eswr distance between columns 500x500 mm weight of the machine ca. 8 t lock stroke 430 mm capacity of ejector 110 kN ejector stroke 100 mm height of form 250-600 mm column diameter 85 mm casting capacity 130 kN casting plunger stroke 175 m/m injection plunger diameter 70,80,90 mm casting volume (DIN 24480) 450,636,856 cm ³ volume cast pressure 335,260,203 kp/cm² casting area 656,846,1078 cm 2 Traverse Stroke 230 m/m Used Die Casting machine DAW XX with XX control and real-time injection for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ XX and used pneumatic sprayer XX. Without sprayer. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement. ----- Used Die Casting machine DAW XX with XX control for the use of zinc alloys. Available from used machine stock. On the machine some repairs were carried out by us as manufacturer. Amongst other things, the closing unit was overhauled, all cylinders new sealed and recognizable defective parts replaced. The machine is equipped with an electric furnace from Rauch Typ XX and used pneumatic sprayer XX. Without sprayer. ----- Used Die Casting machine DAW XX without control and equipment. As a basic machine for general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: new, Year of construction: 2024, closing pressure 900 kN clamping plate 540x540 mm distance between columns 350x350 mm weight of the machine ca. 5,3 t lock stroke 280 mm capacity of ejector 61 kN ejector stroke 70 mm height of form 160-400 mm column diameter 65 mm casting capacity 78 kN casting plunger stroke 130 m/m injection plunger diameter 50,55,60 mm casting volume (DIN 24480) 147, 191, 241 cm 2 volume cast pressure 396, 327, 275 da/cm² casting area 226, 274, 326 cm 2 Traverse Stroke 220 m/m Equipment of the machine 1.0.2Cover for drop through area at the subframe with scale/chute 1.1.0Motorized guard in casting direction left 1.4.0Machine positioning mounting pads 1.5.4Machine interior illumination 1.11.0Convenience package energy efficiency 2.0.1Ejector assistance packages 2.6.4Machine assistance system SensiLock 2.8.0Hydraulic adjustment of locking unit for shot positioning 3.0.1Casting assistance package Basic 3.2.9 EcoMelTec multi-chamber furnace with pump (surcharge) 3.4.4Prefilling process 3.4.5Simplified piston removal 3.4.6Piston stop during return stroke 3.5.2Electric nozzle and gooseneck heating (extended version) 3.5.3 Plug-in connections for electric nozzle and gooseneck heating 4.5.0Shut-off facility for hydraulic locking and injection unit 4.6.1.3Integrated water circuit 2+6 circuits 5.1.0Machine control DATADIALOG - Realtime Control (RC) 5.1.5Maintenance plus package 5.6.1Special cable lengths 6.1.3.1Digital interface for Non-FRECH extractor (Dispo 10) Nsdpfx Aor Hwf Aoa Eswr 6.1.4Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.1.5 Interface for Vacuum unit 6.3.1.1Hanging operating desk with monitor 6.5.2Service Package RSD with Switch for each additional machine 7.2.2.2Spraymotion 611 E with servo drive, 1-circuit 7.2.10Extended spraying program for spraymotion 7.3.1Lubricant container TD 20 7.4.0.3Spray rail CR 275

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, USED KIHEUNG POINT U6 WITH HEIDENHAIN TNC POINT TO POINT CONTROL SERIAL NUMBER 3190597 YEAR 1999 MACHINE DELIVERY / AVAILABILITY - Ex Stock - Subject to Prior Sale. MACHINE CONSTRUCTION & FEATURES  TRAVELLING TABLE CNC MILLING MACHINE WITH UNIVERSAL MANUAL INDEXING HEAD  HEAVY-DUTY CAST-IRON BED CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY.  HEAVY DUTY CAST IRON CONTRUCTION WITH SOLID SLIDEWAYS  LINEAR SCALES. ADDITIONAL INCLUDED ACCESSORIES, OPTIONS & TOOLHOLDERS  COOLANT EQUIPMENT  MACHINE TABLE GUARDING INCLUDED. FIXED TABLE Working Surface 2,200 x 550 MM Tee Slot Configuration 5 T-SLOTS X 20H12 Nwedpfx Asvrzv Eea Eer TRAVELS Longitudinal Column Travel (X-Axis) 1,600 MM Vertical Head Travel (Y-Axis) 900 MM Cross Travel (Z-Axis) 700 MM SPINDLE HEAD Spindle Nose Taper ISO 50 Spindle Speeds - 2 Ranges 40-1600 RPM Spindle Motor Power 11.0 KW SLIDE FEEDS Cutting Feedrate 2000 (LONG AND CROSS), 1000 (VERT) MM / MIN Rapid Traverse (X, Y-Axis) 5 M/MIN Rapid Traverse (Z-Axis) 2.5 M/MIN Rapid Traverse (Z-Axis) 15 M/MIN POWER SUPPLY Voltage 415V / 50HZ / 3PH MACHINE Floor Space 4,750 x 2,720 MM Height 3,050 MM Weight 8,000 KGS

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 786630-01, type of input current: three-phase, overall weight: 4,020 kg, input frequency: 50 Hz, Equipment: documentation/manual, For a high level of safety and exceptional environmental friendliness, there’s nothing to beat a dry-type cast resin transformer. The epoxy resin insulation used in this kind of transformer means no oil is used, greatly reducing the risk of fire and improving recyclability, all without loss of performance compared to other transformer types. Dry-type cast resin transformers are therefore ideal for critical applications and high-traffic areas. Even among dry-type cast resin transformers, Trihal from Schneider Electric stands Nwedpfx Aajxywk Do Ejr out due to its outstanding performance and unrivalled certifications.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 20 m/min, feed length X-axis: 762 mm, feed length Y-axis: 510 mm, feed length Z-axis: 610 mm, nominal power (apparent): 22 kVA, controller manufacturer: Hurco, controller model: Max, workpiece weight (max.): 1,360 kg, total height: 2,775 mm, total length: 2,400 mm, total width: 2,200 mm, table width: 510 mm, table length: 1,020 mm, table load: 1,360 kg, overall weight: 4,900 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 13,200 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: rotational speed infinitely variable, 2008 Hurco VMX30M Vertical Machining Centre Machine Type: 3 Axis Vertical Machining Centre Year: 2008 Control: Hurco Max Single Screen CNC Control Condition: Very Good High-Precision CNC Milling – Powerful, Rigid and Reliable 2008 Hurco VMX30M Vertical Machining Centre, in good working condition. Engineered in the USA by Hurco Companies Inc., the VMX30M delivers precision 3-axis machining, high-speed spindle performance, and intuitive CNC control. This model is ideal for toolrooms, precision engineering, and production machining across metals and composites, offering impressive rigidity and productivity in a compact footprint. ⚙️ Technical Specifications – Hurco VMX30M Model/Type: Hurco VMX30M Vertical Machining Centre Year: 2008 Travels (X / Y / Z): 762 mm / 510 mm / 610 mm Table Size (W × L): 510 mm × 1020 mm Max Table Load: 1360 kg Spindle Taper: BT 40 Spindle Speed: 10000 rpm Spindle Power: 13.2 kW Tool Changer Capacity: 24 stations (ATC) Rapid Traverse Rates (X / Y / Z): 30 / 30 / 20 m/min Nodpfx Asxy Iz Tja Eowr CNC Control: Hurco MAX Single Screen Control Machine Dimensions (L × W × H): 2400 × 2200 × 2775 mm Machine Weight: 4 900 kg Condition: Good – ready for production use 🌟 Key Features and Advantages Rigid Heavy-Cast Iron Frame – excellent vibration damping and machining accuracy. High-Speed 10 000 RPM Spindle – perfect for aluminium, steel, and tool steel machining. Powerful 13.2 kW Drive – delivers consistent torque across the speed range. Generous Travels (762 × 510 × 610 mm) – handles large parts or multiple fixtures easily. 24-Tool Automatic Tool Changer – reduces setup time and increases throughput. Hurco MAX Control Interface – user-friendly conversational and ISO G-code programming. High Rapids 30/30/20 m/min – fast positioning for shorter cycle times. Robust Design and Proven Reliability – built for continuous industrial operation. 🧰 Applications Precision machining and mould manufacture Aerospace and automotive components General engineering and toolroom production Prototyping and small-batch manufacture Why Choose This Hurco VMX30M High-accuracy CNC vertical machining centre for precision metal cutting. Good condition and production-ready. Compact footprint with large working envelope. Proven Hurco control system for easy setup and fast programming. Available immediately with delivery across Ireland and the UK at an extra cost. *Specifications are given in good faith but not guaranteed* Hurco VMX30M for sale Used Hurco vertical machining centre Ireland Hurco VMX30 specifications Hurco VMX CNC mill for sale 3-axis CNC machining centre Hurco Used Hurco CNC machine UK Ireland Hurco VMX30M good condition Hurco CNC milling machine for sale Hurco VMX CNC with MAX control Used Machine Tools Ireland Hurco

Condition: good (used), Year of construction: 1997, Portal center with high rigidity thanks to a cast construction and the latest technology in the area of control, vibration damping, dynamic axis movements and temperature stabilization of the machine frame. Even grinding is possible with high precision. Year of manufacture 1997 Renewed components: Milling spindle - entire control unit - guides Technical data - Travel ranges X 1,000 mm, Y 800 mm, Z 600 mm - Drive power 25 kW - Speed 30,000 rpm - Spindle mount HSK E 50 - Feed rate up to 30 m/min. Work table - Dimensions 1,200 mm x 1,000 mm - Max. workpiece weight 1,000 kg - Table with 3R system for workpiece clamping Control - RMS 6 Windows NT, including software for NC milling simulation in the latest version - Electronic hand control panel - Network card - Integrated workshop programming - Automatic spline interpolation - Windows NT enables direct milling path programming - Adjustable dynamics for high accuracy Machine structure - High machine rigidity due to portal construction in cast construction - Optimal vibration damping of the spindles due to cast-in special plastic - Temperature stabilization of the entire machine body - Crane loading possible Tool changer - 18 stations, dust-proof, with integrated measuring laser for tool length and diameter - Changing in sister tools, Dependent on tool life Equipment - Cooling unit for temperature stabilization - Fully protected cabin, cabin roof can be opened Nwsdpfx Asvt Dwboa Ejr - Touching with 3D probe for quick setup - Integrated chip conveyor for easy disposal of chip waste Machine data - Space requirement (without service areas!) LxWxH approx. 4,200 mm x 3,350 mm x 4,200 mm - Weight approx. 13,000 kg - Connected load 50 kVA, 400V, 50/60 Hz The machining center is in very good condition and works reliably. There is no backlog of maintenance or repairs. A viewing under power and chip is possible by appointment. All tools and operating materials shown in the photos are not included in the scope of delivery of the machine. Technical changes and errors reserved.

Condition: good (used), Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Manufacturer: optibel, timing belt pulley Ø 228 mm -Type: TB 90 8M 30 -Material: Cast iron Nwsdpfx Aex Nmr Eea Eor -Number of teeth: 90 teeth / Belt width: 30 mm -Mount: Taper clamping bushing: optibelt 2517-30 Ø 30 x 45 mm -Quantity: 2x timing belt pulleys available -Price: per piece -Dimensions: Ø 228 x 45 mm -Weight: 7.1 kg/pc.

Condition: new, The V-Turn 410/1500, part of the Conventional Horizontal Lathes category and under the Engine Lathes group, is a precision lathe designed for both precision machining and robust production tasks. This bestselling model from KNUTH features an inverter and a powerful 5.5 kW motor, offering spindle speeds up to 3,000 1/min, making it highly effective for processing workpieces with small diameters while maintaining exceptional quality. The constant cutting speed function during face turning automatically adjusts spindle speed based on the diameter, ensuring turning results that rival those of CNC machines. Built with a heavy ribbed machine bed and a solid cast-iron frame, the V-Turn 410/1500 provides stability and strength for heavier machining applications. Additional features include a micrometer stop, turret stop, and integrated central lubrication for low maintenance. With extensive standard equipment, this machine is ready for various turning operations. To enhance your productivity with a top-notch Engine Lathe, order online today or request a quote. Nwjdpfjuxddcox Aa Eor

Condition: used, Year of construction: 2006, Technical details: turning diameter: 490 mm turning length: 2000 mm total power requirement: 15/20 kW weight of the machine ca.: 3,6 t dimensions of the machine ca.: 2,8 x1,85 x 1,9 m In like new condition Heidenhain cycle control Torsion-resistant bed, made of high-quality cast iron with hardened, precision-ground guideways and a glass scale on the X-axis Safety clutch on the Z and X axes Sealing air with carbon filter in direct position measuring system High accuracy and rigidity of the lathe spindle thanks to precision spindle bearings, spindle bore Ø 93 mm standard, optional Ø up to 130 mm Solid tailstock, quill Ø 90 mm with internal taper MK5 Large overhang above the facing slide for easy accessibility during shaft machining. The machine has Teach-in CNC Programms. Control: MC420. Tool holder: SAUTER. * Njdjwmcx Aspfx Aa Eowr

Condition: used, Year of construction: 1995, SPINDLE MOULDER WITH LONG TABLE & POWER FEEDER Brand: ROBLAND Model: T120S-L-P Year: 1995 Machine offered as-is, without warranty SPINDLE MOULDER CAPACITIES: - Spindle diameter: Ø50 mm Useful length (above the table): 150 mm Vertical spindle stroke: 205 mm - Spindle speeds: 3000/4500/6000/7000 rpm MACHINE SPECIFICATION: - Sturdy welded steel frame - Cast iron table (LxW): 310x190 mm Side extensions: 670x250 mm Frontal table extension: 2460x620 mm with entry roller Table rings: Ø350; Ø250; Ø200 Raised tool passage in table: Ø320 x 95 mm - Wooden fences: 530x150 mm Fine adjustment of the hood and indexed stops Maximum tool diameter for guide work: Ø250 mm TENONING: - Sliding tenoning carriage 760x500 mm Equipped with graduated transverse stop with adjustable end stop Adjustable support arms ensure complete rigidity of the carriage rail - Adjustable tool approach table with eccentric clamp - Angular adjustment of the fence with graduation from 0 to 45° - Tenoning hood guard - Maximum tenoning tool diameter: Ø350 mm Equipped with a power feeder: - Brand: Polymatic Year: 1996 - Power: 0.75 kW - 3 rubber feed rollers - 2 feed speeds (mechanical and electrical) OTHER CHARACTERISTICS: - Electrical supply: 380V, 3-phase + T, 50Hz - Manual star-delta starting - Installed power: 6.25 kW - Main motor power: 5.5 kW (7.5 HP) - Lockable isolator, emergency stop button - Safety guard for guide operations - Dust extraction inlet on spindle hood Ø120 mm Nwedpfsx Igzqox Aa Ejr Lower suction port Ø120 mm Dimensions (LxWxH): 270x165x165 cm Weight: 800 kg

Condition: used, maximum load weight: 13,020 kg, overall weight: 16,000 kg, first registration: 01/2016, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 2,525 mm, loading space volume: 45 m³, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2016, Vehicle No. G0123211_1 – Manufacturer: Krone. * Double corner castings * Side/rear contour marking * Load certification Code-XL * Forklift accessible * Telescopic support legs * Equipment for rail loading * Lashing options Smooth furniture floor. Delivery time: AVAILABLE IMMEDIATELY. Technically operational condition, ready for use with no further repairs required. Partial repainting. Undercarriage shows signs of use. Valid UVV inspection. LASI CODE XL!!! Nwodpsx Ipl Sefx Aa Eor Dimensions are approximate. Offer is non-binding, subject to prior sale, prices are net ex location D-59302 Oelde. Further details on request by phone or e-mail:

Condition: new, Year of construction: 2024, New machine Year of construction 2024 Technical data Table size 1100 x 760mm Table height 905mm Milling spindle 30mm with quick-release nut Clamping height 140mm Height adjustment 125mm Suction nozzle 2 x Ø 120mm Infinitely variable speed control 150010000 rpm Motor power 7.5 kW (10 HP) Net weight approx. 880kg Technical description 7" touch control, can be used optionally, top and bottom 7" capacitive touchscreen, can also be operated with gloves can also be operated with gloves (e.g. with Maxi Flex) Language switching German, English, French (other languages on request) Milling cutter zero point selectable in the program, 3 reference points Simple menu structure thanks to innovative touch control (max. 2 levels) Display (work screen) for tool and program number program number, height, angle, speed and milling fence Operating hours counter Warning messages in the event of incorrect operation Remote maintenance via Internet (VPN tunnel) USB interface for data backup and importing Tool, program and user Tool database for 5 tools (20 programs possible per tool) 20 programs are possible per tool) Heavy-duty bench router with double-sided swivel-mounted, fixed built-in milling spindle for swivel range of +/- 45.5° 2-axis positioning control for height and tilt adjustment swivel adjustment Electronic position and speed displays Infinitely variable speed control 1500 10000 rpm 7.5 kW motor with 11 KW frequency converter Push button with electronic soft start Left and right rotation Milling cutter quick clamping device Finely planed gray cast iron table with rigid frame support Milling fence 301 Overall adjustment via 1 handwheel on the right-hand side, Adjustment range approx. 140 mm, dimension display, Total stop via touchscreen +/-0.1 mm, Partial stop adjustment, (chip removal) +5mm to -25mm is carried out via a star knob screw on the left side side, dimension display via one mm vernier, clamping on the machine table the machine table manually via clamping clamping screws, milling fence made of die-cast aluminum with 2 milled cast iron stop slats 500mm long with aluminum splitter tongues, maximum possible tool diameter is tool diameter is 250 mm Machine socket Lockable main switch Electronic, wear-free motor brake Milling protection and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30mm with quick-release nut CE-compliant incl. - Milling fence type 301 - Cast stop plates and aluminum splitter tongues - Milling protection and pressure device GAMMA V 1629 Table pusher for table top 1100 x 760 mm Coated surfaces, for quick, convenient and tool-free tool-free adjustment to different tool diameters tool diameters up to max. 240 mm, the table insert Table insert with quick lock up to tool diameter 155 mm instead of standard table insert rings (not in conjunction connection with rotary table) - Zeromaster reference measurement setting device for exact 0-point height adjustment from the milling tool to the table top for 24 V DC - HSK-80 quick-change arbor system with spindle lock and spindle lock and milling arbor 30mm instead of milling spindle 30mm (higher concentricity and no sticking in the spindle as with the spindle as with the MK 5 system or steep taper) Nwodpox N Dhdjfx Aa Esr - Console to the

Condition: new, Gear driven column drill 400V-3Phase Max. drilling capacity Cast iron / Steel --- 40 / 35 mm Max. tapping capacity Cast iron / Steel --- 24 / 22 mm Spindle adaptor --- MK4 Spindle stroke --- 120 mm Spindle speed --- (12) 75~3200 rpm Automatic spindle feed --- 0.10/0.18/0.26 mm/omw Column diameter --- 125 mm Unloading --- 320 mm Distance from spindle nose to table --- 85~665 mm Distance from spindle nose to base --- 1140 mm Drilling table --- 500 x 380 mm T-slot --- 14 mm Foot --- 470 x 670 mm Motor --- 1.5 kW Machine dimension --- 470 x 710 x 2000 mm Weight --- 470 kg Njdpfxek H Ig Ro Aa Eowr

Condition: used, mileage: 178,000 km, power: 213 kW (289.60 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 5,430 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 10,270 mm, total width: 2,590 mm, loading space length: 8,300 mm, loading space width: 2,490 mm, loading space height: 2,520 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, power mirror, spoiler, tail-lift, General information Year of manufacture: 2021 Technical information Number of cylinders: 6 Engine capacity: 6.871 cc Nwedpfox Nxhlex Aa Eor Axle configuration Brakes: disc brakes Suspension: air suspension Front axle: Steering; Tyre profile left: 80%; Tyre profile right: 80% Rear axle: Double wheels; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80% Weights Empty weight: 8.995 kg Carrying capacity: 6.505 kg GVW: 15.500 kg Functional Tail lift: Zepro, tail lift, 2000 kg Insulated loading platform Cast floor Webasto Heating in loading space.

Condition: good (used), Clamping plate, welding table, welding table, straightening plate, perforated plate -Dimensions: 2280/1060/40 mm -Table height: 960 mm Nwjdpfx Aaob A Nbnj Ejr -with supporting ribs -Cast iron plate -Weight: 1050 kg

Condition: used, Year of construction: 2021, operating hours: 3,300 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Nwjdpfx Aoxx Tigea Ejr Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Condition: new, Center length ----- 1000 mm Center height ----- 180 mm Spindle diameter ----- 360 mm Main spindle passage ----- 40 mm Bed width ----- 260 mm Spindle speed ----- 40-1800 rpm Motor ----- 2.4 KW Weight ----- 1000 kg Nsdega Ty Espfx Aa Eowr INCLUDED * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOE5 with 4 pockets * 3 Chuck 200 mm * 4 Chuck 200 mm * Clamping plate 250 mm * LED working light and cooling system * Fixed and moving glasses HEAVY DUTY VERSION WITH CAST IRON FRAME