Used Cable Stripper for sale (3,953)

Condition: refurbished (used), battery capacity: 750 Ah, battery voltage: 48 V, total height: 625 mm, total length: 827 mm, total width: 735 mm, Tested forklift battery for your truck – 48V 6PZS 750Ah – DIN A + 1-year warranty + Incl. Aquamatic system + Incl. end cell cables & REMA 320 connector (other connectors can be installed upon request) + Capacity: min. 90-100% (C5 capacity protocol provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 827 mm Width 735 mm Height 625 mm Weight: approx. 1,020 kg Suitable for the following models and more: Linde E15S-355-00 Linde E16 - 324-00 Linde E16 - 386-00 Linde E16L - 386-02 Linde E18 - 355-00 Linde E18 - 386-02 – lateral change Linde E18C - 355-00 Linde E18 L - 386-00 Linde E18 L - 386-02 – lateral change Linde E20 L - 386-00 Linde E20 L - 386-00 – lateral change Linde E20 PL - 386-00 Linde E20 PL - 386-02 – lateral change Linde R14 X - 116-03 – frontal change Linde R14 X HIGH - 116-00 – frontal change Linde R16X - 116-00 Linde R16X - 116-00 – frontal change Rcjdpfx Asy Rnndjkieh Linde R16X- 116-03 – frontal change Still R20-16 Still R20-18 Still RX 20-18PL Still RX 20-20 Crown SC 5360-2.0 Jungheinrich EFG Series Jungheinrich EFG 216 Jungheinrich EFG 218 Jungheinrich EFG 220 Jungheinrich EFG 222 Jungheinrich EFG 316 Jungheinrich EFG 318 Jungheinrich EFG 320 Jungheinrich EFG DF 16L Jungheinrich EFG V 20 Jungheinrich EFG VAC 320 Toyota 7FBEF16 Toyota 7FBEF18 Toyota 7FBEF20 Toyota 8FBE16T Toyota 8FBE18T Toyota 8FBE20T Blgkcdacpxv Toyota 8FBEK18T Toyota 8FBMT18 Toyota 8FBMT20 Toyota/BT CBE 2.0 Caterpillar EP 16/20 Caterpillar EP20PN Cesab B320A Hyster J1.6XNT Hyster J1.8XNT Hyster J2.0XN LOC E20 Mitsubishi FB16PNT Mitsubishi FB20PN Mitsubishi FB20PNT Steinbock-Boss KE20 Common battery sizes available on request. Transport available.

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 48 V, total height: 784 mm, total length: 1,035 mm, total width: 533 mm, Tested forklift battery for your truck - 48V 5PZS 775Ah - DIN B + 1-year warranty + Includes Aquamatic system + Includes end discharge cables & REMA 320 plug (other plug types can be fitted upon request) + Capacity: min. 90-100% (C5 capacity protocol supplied with delivery) + Year of manufacture: 2024 Dimensions: Length 1,035 mm Width 533 mm Height 784 mm Weight: approx. 1,160 kg Suitable for the following models and more: Linde A (1120) - 5022-00 Linde A - 5224-00 Linde E 16 - 386-00 Linde K - 5231-00 Linde K - 5231-00 - side battery change Linde K 10 Linde K 12 Linde R 14 N - 1120-00 Linde R 14 N - 1120-00 - front battery change Linde R 16 N - 1120-00 Linde R 16 N - 1120-00 - front battery change Linde R 16 N HD - 1120-00 - front battery change Rcsdpfx Aoy Rnn Rjkish Linde R 20 N - 1120-00 Linde R 20 N - 1120-00 - front battery change Linde R 20 N - 113-00 Linde R 20 N - 113-00 - vertical battery change Linde R 20 SN - 115-08 - vertical battery change Still EK 11 Still FM-X 14 N Still MX 10 Still R 20-16 Still RX 20-18 Still RX 20-18 P Still RX 20-20 Still RX 20-20 PL Jungheinrich ETM 214 Jungheinrich ETM 216 Jungheinrich ETV Jungheinrich ETV C 16 Jungheinrich ETV Q 20 Crown ESR 5220-1.6 Caterpillar NOH10NH Caterpillar NR20NH Common battery sizes available - please enquire. Delivery possible.

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 48 V, total height: 785 mm, total length: 832 mm, total width: 631 mm, Tested forklift battery for your forklift - 48V 5PZS 775AH - DIN A + 1 year warranty + Including aquamatic (automatic watering system) + Including end discharge cable & REMA 320 plug (other plugs available on request) + Capacity: min. 90-100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length: 832 mm Width: 631 mm Height: 785 mm Weight: approx. 1,150 kg Compatible with the following models and others: Linde E 16 - 335-00 Linde E 16 - 386-00 Linde E 16 CH - 1275-00 Linde E 16 H - 386-00 Linde E 16 H - 386-02 - side battery change Linde E 16 P - 322-00 Linde E 16 P - 335-00 Linde E 16 PH - 1275-00 Linde E 16 PH - 386-00 Linde E 16 PH - 386-02 - side battery change Linde E 18 - 386-02 - side battery change Linde E 18 P - 322-00 Linde E 18 P - 335-00 Linde E 18 PH - 386-00 Linde E 18 PH - 386-02 - side battery change Linde E 18 Z - 322-00 Rodpfxsy Rnpbo Akioch Linde E 20 P - 335-00 Linde E 20 PH - 1275-00 Linde E 20 PH - 386-00 Linde E 20 PH - 386-02 - side battery change Linde E 20 PH EVO - 386-02 Linde EG 16 - 1275-02 - side battery change Linde EG 16 H - 1275-02 - side battery change Linde EG 16 P - 1275-02 - side battery change Linde EG 16 PH - 1275-02 - side battery change Linde EG 20 PH - 1275-02 - side battery change Linde R 20 - 1120-00 Linde R 20 G - 1120-00 Crown SC 3013 Other common battery sizes available on request. Transport can be arranged.

Condition: used, Bluhm Systems Type: e-SolarMark FL Marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30 W are laser systems of Class IV according to the IEC 825 and EN 60825 guidelines (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product with a specific protection class, according to the aforementioned guidelines. The e-SolarMark is a laser system for marking and engraving plastics, metals, and foils, both stationary and in motion. Technical Specifications e-SolarMark Description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system function, with I/O slots inside. The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Laser Specifications (Standard Version) Laser Type - Fiber Laser Laser Output Power - FL2 Model: 19W; typical Wavelength - 1062 nm typical Internal Modulation - 20 to 80 kHz Scanner Head Description: Scan Head - Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens Types and Their Properties: Lens - Marking field 70x70 mm to 300 x 300 mm Focal distance - 192 mm Operating Environment Conditions: Relative humidity up to 80%, non-condensing Operating temperature 5 - 40°C Recommended operating temperature 15-25°C Redpfx Aozgci Ejkioch Dimensions W x H x D Laser unit 122 x 108 x 495 mm Control unit 520 x 380 x 215 mm Cable length, marking/control unit 3 m Weight, marking unit 5 kg Weight, control unit 15 kg Mains voltage 115/230 VAC. 50/60 Hz, single-phase. Power consumption, FL2 model 450W Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Laserline Type: LPC03 Lascon laser system with Lascon controller LPC03 Laserline diode laser The diode laser ›LDM 500-60‹ has a wavelength of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 Wavelength of 935 nanometers +/- 10% Laser power: 550 W Supply voltage 100-264V +/- 10% Max. power consumption 1.7 kW Rodpfx Ajzdqkrokijch Frequency 1 phase 47-63 Hz Laser class 1 Type: LDM 500-60 Lascon controller LPC03 The LPC03 has the processing power of a complete PC in a very small space. Instead of a hard drive, a removable flash disk has been installed. Due to the elimination of the hard drive and the extremely low heat generation, the LPC03 is therefore ideally suited for tasks in the field of measurement, control and regulation in an industrial environment. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also provides space for the PCI card PCI-1P. In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half Size CPU card Slots: 1 x PCI, length max. 180 mm Drives: none Storage medium: removable flash disk Connections: USB front; Ethernet, RS232, VGA, keypad, mouse, USB rear Housing: 212 mm x 80 mm x 250 mm (height x width x depth) Protection class: Front: IP40 Environment: 15°C - 40°C Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, GE Druck Modular High-Precision Pressure Controller / Pneumatic Pressure Controller PACE5000 Professional High-Precision Pressure Controller for calibration, pressure testing, automation, and laboratory applications For sale is a used high-precision pressure controller from the manufacturer GE Druck. The PACE5000 is a modular, high-precision pressure control system designed for the most demanding applications in calibration laboratories, research, development, production, and quality assurance. Due to its high control speed and precision, the device is ideally suited for automatic pressure tests, calibration tasks, and industrial measuring and testing systems. Technical data: Manufacturer: GE Druck (Baker Hughes) Model: PACE5000 Device type: Modular High-Precision Pressure Controller Pneumatic Control Module: CM0-B-16G Dimensions: approx. 440 × 88 × 320 mm (W × H × D) Weight: approx. 10.1 kg Control range: -1 to 70 bar(g) Maximum permissible operating pressure (MWP): 94 bar Accuracy: up to 0.001% of the final value (model-dependent) Long-term stability up to 0.001% FV Features: Modular control system Very high pressure control speed Automatic pressure control Pressure testing Leak test function Burst test Switch test Programmable test sequences User-defined pressure units Display: Color touch display Graphical user interface Display of setpoint and actual value Intuitive menu navigation Interfaces: Ethernet USB Host USB Device RS-232 CAN IEEE-488 (GPIB) 24 V DC inputs/outputs Pneumatic connections: Supply Output Vent Reference G1/8" connection Power connection: 100–230 VAC 50–60 Hz Power consumption: max. 100 VA Application areas: Calibration laboratory Testing systems Quality assurance Automotive industry Aerospace Mechanical engineering Measurement technology Research & Development Automation technology Pressure sensor calibration Equipment: Color display Pneumatic Control Module Ethernet USB RS232 CAN IEEE-488 (GPIB) Pressure connections Power cable Accessories as shown in the pictures Scope of delivery: GE Druck PACE5000 Power cable Accessories as shown in the pictures Weight: approx. 10.1 kg Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age are present. Redpjziyqrsfx Akisch The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping via parcel service or freight forwarder is possible. Subject to changes, errors, and prior sale. We will be happy to answer any further questions by telephone or e-mail.

Condition: used, EA Elektro Automatik Type: EA-PS 8080-170 3U EA Elektro-Automatik EA-PS 8080-170 3U 19″ Rack – Laboratory power supply 0-80V / 0-170A, 5000W For sale is a high-quality, programmable laboratory DC power supply from the renowned company EA Elektro-Automatik GmbH & Co. KG. This is the EA-PS 8080-170 3U model with an output power of up to 5000 W. Special features: Autoranging (flexible combination of voltage/current up to maximum power) Remote Sense (up to 2.5 V compensation) Low ripple: < 10 mV RMS / < 100 mV pp Multiple interfaces for external control: USB, RS-232, CAN, LAN (Ethernet), GPIB (IEEE488), Profibus Analog control (0–5 V / 0–10 V) Rcedpfxezibh Eo Akieh Fan-cooled, robust industrial design. Technical data: Output voltage: 0 … 80 V DC Output current: 0 … 170 A Maximum power: 5 kW Form factor: 19″ Rack, 3U Efficiency: approx. 93 % Weight: approx. 20 kg Scope of delivery: (See image) EA-PS 8080-170 3U power supply Power cable (Subject to change and errors in technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: used, Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Material Testing Machine, 20 kN, Tensile & Compression Testing, testXpert III For sale is a high-quality Zwick / Roell material testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. The machine is controlled via a PC with Zwick/Roell testXpert III software (storage medium and documentation available). Technical Data: Nominal testing force: 20 kN Testing direction: Tensile & Compression Power connection: 230 V / 50–60 Hz / 1-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical Data (from documents & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: Tensile & Compression Max. testing frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight Overall height: approx. 1,545 – 2,114 mm (depending on the crosshead position) Overall width: approx. 856 mm Overall depth: approx. 650 mm Working space width: 440 mm Weight: approx. 150 kg (basic unit) approx. 180 kg with typical equipment Electrical Data Power connection: 230 V AC Phases: 1-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Socket: Schuko (CEE 7) Measuring & Control Electronics Internal measurement value acquisition: 500 Hz Data transmission to PC: 10–100 Hz adjustable Interface: RS232 (COM) Protection class for electronics housing: IP32 Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of supply: (See picture) Zwick / Roell material testing machine (20 kN) Electronics unit PC workstation (monitor, PC condition see pictures) 2 measuring modules (Delock units) Zwick/Roell testXpert III software (storage medium) Original operating and technical documentation Rcodpozimgtefx Akieh Various connection and linking cables (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Ytterbium Fiber Laser Type: YLR-2400 S2-WW Description: Laser module (IPG YLR-2400 S2-WW fiber laser with cooling) Year of manufacture: 2017, Serial number: 7121450 Laser power: 2.4 kW Laser structuring system, cooling unit KKW; Rjdszdrw Hspfx Akisch without 3D scanning head and without laser spy sensors and cables. 400 VAC +/-10% 3P/PE 50/60 Hz 80A Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Item: inos iSENS laser sensors Item: inos iSENS laser sensors with control unit, cable, PC interface Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) Rsdpjzdn T Refx Akiech We will gladly answer any further questions you may have over the phone.

Condition: used, Mitsubishi Type: Mitsubishi Melfa RV-3SDB-S15 Mitsubishi Industrial 6-Axis Articulated Arm Robot The RV-3SDB articulated arm robot The RV-3SB robot is specifically designed for handling up to 3.5 kg. The enclosure, which meets the IP 65 standard, ensures operation under extreme conditions. Special Features: • Adjustment of axis compliance for workpiece tolerance compensation • Conveyor tracking • Sensorless collision detection • Encapsulated design • Adaptive speed optimization Feature/Function Degrees of Freedom (Number of Axes) 6 Design: Standard (Oil Mist) Mounting: Floor, wall or ceiling mounting possible (wall mounting with limitations in the J1 axis) Construction: Vertical articulated arm Drive System: AC servo (all axes with brake) Position Detection: Absolute encoder Range of Motion: Degrees Body (J1) 340 (−170 to +170) Shoulder (J2) 225 (−90 to +135) Elbow (J3) 191 (−20 to +171) Forearm Rotation (J4) 320 (−160 to +160) Wrist Bend (J5) 240 (−120 to +120) Wrist Rotation (J6) 720 (−360 to +360) Rodpfezdiuksx Akiech Movement Speed: Degrees/s Body (J1) 250 Shoulder (J2) 187 Elbow (J3) 250 Forearm Rotation (J4) 412 Wrist Bend (J5) 412 Wrist Rotation (J6) 660 Resultant Maximum Speed 5500 mm/s Lifting Force Nominal value 3kg Maximum value 3.5kg Reach Radius (to the pivot point of the J5 axis) 642mm Weight: 37kg Robot Controller: CR1DA-721-S15 (230V) Teachbox: R46TB with color/touch display Technical Data: Dimensions (W × H × D) 252 × 240 × 114 mm Weight 1.250 kg Connection Type: Connection to the robot controller with a circular connector, cable length 7 m Interfaces: RS422 For connection to the robot controller Display/Screen: Touch-sensitive 6.5" TFT monitor with backlight and 640 × 480 pixel resolution, the touchscreen can be operated with fingers or a stylus. Condition: used Scope of Delivery: (See image) (Subject to changes and errors in the technical data, information provided!) We will gladly answer any further questions you may have by phone.

Condition: used, Zwick / Roell Material Testing Machine / Universal Testing Machine Zwick / Roell Z020 Allround-Line BT2-FR020TNW.A50 20 kN material testing machine for tensile and compression testing with testControl II & testXpert V3.5 For sale is a used material testing machine from the manufacturer Zwick / Roell. The machine is suitable for tensile and compression tests on metals, plastics, elastomers, composite materials, and numerous other materials in the laboratory, quality assurance, research and development. Technical data: Manufacturer: Zwick / Roell Model series: Z020 Allround-Line Type: BT2-FR020TNW.A50 Testing force: 20 kN Testing direction: Tensile & Compression Testing space height: 1000 mm Crosshead speed: 0.0005–1000 mm/min Power connection: 230 V / 50–60 Hz Power consumption: 8 A Electronics: testControl II Software: Zwick / Roell testXpert V3.5 Equipment: Servo-electric material testing machine testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Testing table Test fixture Various connection and cable sets Accessories as shown in the pictures Dimensions and weight: Machine dimensions (approx.): 1244 × 690 × 1324 mm (W × D × H) Weight: approx. 212 kg Application areas: Tensile testing Compression testing Material testing Quality assurance Research & Development Testing laboratory Education and training Rcedpfx Aszra Rqskish Scope of supply: 1 × Zwick / Roell Z020 Allround-Line material testing machine testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Connection and cable sets Further accessories as shown in the pictures Condition: Used Visual condition as shown in the pictures Functional scope as shown in the pictures Nameplates are present The table, monitor, keyboard, and mouse shown in the photos, as well as any other items not explicitly mentioned, are not part of the sale. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Mitutoyo   Quick Vision Apex QV-X404P1L-C CNC Image Processing Measuring Machine / Optical Measuring System   Manufacturer: Mitutoyo Corporation Type: QV-X404P1L-C Code No.: 363-131EU Professional CNC image measuring system for non-contact dimensional measurement tasks   For sale is a used Mitutoyo Quick Vision Apex CNC image processing measuring machine, including existing PC system, two monitors, control unit, measuring software, and extensive documentation.   The existing PC system and the installed QVPAK software start up. However, the complete machine and measuring function could not be fully tested.   The Quick Vision series is used for non-contact dimensional measurement of workpieces by means of an optical system, image acquisition, and image processing. Suitable for precise measuring and testing tasks, among others, for components from the fields of electronics, precision mechanics, and industrial manufacturing.   Technical data:   Manufacturer: Mitutoyo Corporation Model: Quick Vision Apex Type: QV-X404P1L-C Code No.: 363-131EU Country of Manufacture: Japan Machine type: CNC image processing measuring machine   Measuring range X / Y / Z: approx. 400 × 400 × 250 mm Measuring principle: non-contact optical image measurement CNC-controlled measuring system   Existing measuring software: Mitutoyo QVPAK QVPAK (R): Version 7.502.0010 QVGEO: Version 7.502.0010 Statistics: Version 7.502.0010   Equipment:   Mitutoyo Quick Vision Apex measuring machine PC workstation Fujitsu Siemens CELSIUS PC system 2 Fujitsu monitors Keyboard and mouse Mitutoyo control unit / joystick with emergency stop QVPAK measuring software Mitutoyo MCOSMOS / MiCAT data carriers GEOPAK documentation QVPAK documentation Other Mitutoyo operating manuals and documents Clamping plate / workpiece fixture as shown in the pictures Connection cables and accessories as shown in the pictures   Application areas:   Optical dimensional inspection Non-contact workpiece measurement Quality assurance Precision metrology Component and contour inspection Manufacturing and process control   Scope of delivery:   Mitutoyo Quick Vision Apex QV-X404P1L-C with PC workstation, monitors, control unit, existing software, documentation, and accessories as shown in the pictures. Scope of delivery is limited to what is shown in the pictures.   Condition:   Used Optical condition according to pictures PC system and existing QVPAK software start up. Signs of wear and tear due to age and use are present. Visible damage / signs of wear are present on the machine housing, see pictures.   Important note: The machine has not been tested, as it is in a protective mode after being moved. This is also intended by the manufacturer when transporting the machine. The machine must be recommissioned by qualified Mitutoyo personnel.   Shipping by freight forwarder is possible. Rsdpoztyabjfx Akiech Subject to changes, errors and prior sale.   We would be happy to answer any further questions by telephone.

Condition: used, STÄUBLI SCARA industrial robot with CS9 controller TS2-40 4-axis SCARA robot for highly precise pick & place, assembly, and automation tasks For sale is a used SCARA industrial robot from the manufacturer Stäubli, including a CS9 controller and an SP2 teach pendant. The robot system is ideally suited for fast pick & place applications, assembly, packaging, handling, as well as laboratory and automation tasks. The complete system, including controller, teach pendant, robot connection cable, and other accessories, will be delivered as shown in the pictures. Technical data: Manufacturer: Stäubli Faverges SCA, France Model: TS2-40 Robot type: SCARA, 4 axes Year of robot manufacture: 02/2024 Year of controller manufacture: 02/2024 Controller: CS9-TS2-40 Teach pendant: SP2 Reach: 460 mm Rated payload: 2.4 kg Max. payload: 8.4 kg Robot weight: 38 kg Controller weight: 30 kg Repeatability XY: ±0.01 mm Repeatability Z: ±0.004 mm Repeatability Rz: ±0.002° Controller: Stäubli CS9-TS2-40 rack controller SP2 teach pendant VAL 3 activated PROFINET Device Ethernet interface Programmable robot controller Connections: Controller power supply: 1 × 230 VAC, 50/60 Hz Power consumption: 1700 VA PROFINET Device Ethernet Digital input/output Rcodpfx Akszlry Reijh Pneumatic connections on the robot Equipment: Stäubli TS2-40 SCARA robot CS9-TS2-40 controller SP2 teach pendant Original robot connection cable End-of-arm tooling mounting installed VAL 3 programming system Accessories as shown in the pictures Application areas: Pick & Place Assembly automation Electronics manufacturing Laboratory automation Packaging automation Machine loading Quality assurance Industry 4.0 applications Scope of delivery: Stäubli TS2-40 SCARA robot CS9-TS2-40 controller SP2 teach pendant Original robot connection cable End-of-arm tooling Accessories as shown in the pictures Condition: Used Year of manufacture 2024. Optical condition as shown in the pictures. System start and information menus tested. Robot system including controller and teach pendant. The table or any other items not explicitly mentioned in the photos are not included in the sale. Shipping via freight forwarder is possible. Subject to changes, errors, and prior sale. We will be happy to answer any further questions by telephone or email.

Condition: used, mileage: 190,050 km, power: 110 kW (149.56 HP), first registration: 09/2022, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 7,367 mm, total width: 2,020 mm, total height: 2,825 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle number: 0318X ----Why autonext? Over 400 vehicles immediately available, including cars and commercial vehicles. One of the largest vehicle showrooms in the region. Over 1,000 satisfied customers annually – top customer ratings. Attractive financing and trade-in options available. Complete vehicle range available at autonext. Mobility made easy. WhatsApp Chat: ### Offer: Financing from 4.99 % ### ----Good, well-maintained condition 1st owner, German vehicle, non-smoking vehicle Complete service history, exclusively maintained at Mercedes-Benz Next service in 547 days Maxi extra-long panel van with super high roof Number of seats: 3 Acoustic package Smoker's package MBUX multimedia system (7" touchscreen) Navigation system Air conditioning (Tempmatik) Comfort driver's seat Upon request, we offer retrofitting of a reversing camera. Upon request, we offer retrofitting of a trailer coupling for only 599 euros, and if possible, also an increase in the trailer load to up to 3.5 tons. ---- Special equipment: * MBUX multimedia system (7" touchscreen) * Bluetooth hands-free system * Steering wheel with multi-function buttons * Storage compartment in the roof lining of the driver's cab * Airbag on the passenger side * Acoustic package * Electrically foldable exterior mirrors * DAB tuner (digital radio reception) * Roof light in the cargo area with door contact switch * Entry handle on the rear pillar, rear right * Suspension: stabilization level II * Vehicle without vehicle lowering * Wooden floor in the cargo area * Folding cover for storage compartment * Air conditioning (Tempmatik) * LED cargo area light * Cable duct on the rear door * Cable duct on the side wall * Navigation system for MBUX multimedia system * Smoker's package * Spare wheel in driving condition * Spare wheel holder under the end of the frame including jack * Seats in the driver's cab: double passenger seat * Seats in the driver's cab: heated driver's seat Rsdpfj Agdxwox Akisch * Seats in the driver's cab: comfort driver's seat * Step on the rear door * USB port in the center below the dashboard (charging function only) * Paneling in the cargo/passenger compartment: wood, high (up to the roof) * Lashing rails in the cargo area - side wall on the bulkhead strap * Lashing rails in the cargo area - side wall on the roof frame Standard equipment: 3rd brake light, storage compartment above the windshield, storage compartment below the dashboard on the passenger side, adaptive brake lights, airbag on the driver's side, anti-lock braking system (ABS), anti-slip regulation (ASR), drive type: rear-wheel drive, display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, exterior temperature display, brake assist, automatic activation for headlights, entry handle for the sliding door on the cargo area partition, electronic brake force distribution (EBV), electronic stability program (ESP), driving assistance system: breakdown management, driving assistance system: crosswind assist, electric windows 2-fold, noise reduction outside, transmission 6-speed - TSG (Eco Gear), rear door (opening angle 270 degrees), body/structure: panel van, large volume, overhang, keyless start, child lock, communication module (LTE) for digital services, fuel tank: main tank 71 liters, cargo area partition, steering wheel (steering column mechanically adjustable), headlight range adjustment, truck registration, marker lights on the side, Mercedes-Benz emergency call sys

Condition: used, KUKA Type: KR 10 R900 sixx / KRC4 KUKA industrial robot complete system Robot: KR 10 R900 sixx Controller: KRC4 including KUKA smartPAD, cable set and accessories For sale is a KUKA industrial robot as a complete system from a commercial inventory. The system is ideally suited for automation tasks in industry, laboratories, assembly, handling, pick-and-place applications, testing tasks, and general robot applications. The 6-axis robot is designed for precise and rapid movements and can be used for gripping, positioning, feeding, moving, and processing components. The system offered consists of a robot arm, KRC4 controller, smartPAD, cables, and other accessories as shown in the pictures. Technical data: Manufacturer: KUKA Roboter GmbH Robot type: KR 10 R900 sixx Article No.: 10016515 Serial number: 500874 Payload: 10 kg Reach: 901 mm Axes: 6 Robot weight: 52 kg Controller: KRC4 Article No.: 11019802 Serial number: 224377 Controller weight: 33 kg Controller connection voltage: 1 x 230 V Mains frequency: 50/60 Hz Full load current: 12 A Mains fuse: 16 A Total system weight (approx.): 90–110 kg Rodpfxey Dt D Ds Akijch Robot dimensions (approx.): Reach 901 mm Controller dimensions (approx.): compact KRC4 design Software / Display according to system: KRC SR version: V8.2.3 HMI version: 8.2.0.4 B22 Base system: KSS 8.2.21_SR Installed options according to display: ExpertTech 3.1.1 Gripper-&-SpotTech 3.0.5 OrangeApps.MqttClient 2.2.12 Profinet KRC-Nexxt 2.2.7 RemoteService 1.0.2 UserTech 3.1.4 Description / Functions: The robot can be used for handling and automation processes, e.g. for gripping, transferring, feeding, positioning or processing workpieces. The 6 axes enable flexible movement in space. The compact design and the reach of 901 mm make the system particularly interesting for confined working areas and automated production cells. Total system weight (including controller and accessories, approx.): 90 – 110 kg Condition: used visually with typical signs of wear the screen and system information can be seen in the photos the visual condition can be seen in the pictures Scope of delivery: (See picture) KUKA KR 10 R900 sixx robot arm KUKA KRC4 controller KUKA smartPAD Connection and linking cables other accessories as shown in the pictures Important: The images are the only basis for the scope of delivery. "The table shown in the photos is not part of the sale." Commercial sale (Changes and errors in the technical data, information are subject to change!) We are happy to answer any further questions you may have by phone.

Condition: used, Stäubli Type: TX90L robot / CS8C controller Six-axis robot with controller For sale: a Stäubli TX90L 6-axis industrial robot including CS8C controller and original teach pendant. Rcsdpfxozix Ucj Akieh The robot is suitable for pick & place, assembly, handling, machine loading, as well as automation, testing and training applications. Programming via VAL3. Technical data – Robot Type: TX90L Axes: 6 Payload: 5–6 kg nominal, up to 15 kg temporarily Reach: approx. 1,200 mm Repeatability: ±0.035 mm Wrist protection rating: IP65 (IP67) Mounting: Floor / Wall / Ceiling Robot weight: approx. 113 kg Technical data – Controller Controller: Stäubli CS8C Software: VAL3 s6.7.1 Programming language: VAL3, PLC IEC 61131-3 Interfaces: Ethernet, fieldbus, digital I/O, serial interfaces Power supply: 3 × 400 V, 50/60 Hz Power consumption: approx. 2000 VA Protection rating: IP20 Controller weight: approx. 50 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) Stäubli TX90L robot arm CS8C controller Original teach pendant Connection cable (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by phone.

Condition: used, Stäubli Type: TX90XL robot / CS8C controller Six-axis robot with controller For sale is a Stäubli TX90XL 6-axis industrial robot, including a CS8C controller and the original teach pendant. The TX90XL is suitable for pick & place, assembly, machine loading, part handling, as well as automation, testing and training applications. The XL version offers a large reach for flexible applications. Programming is done via VAL3. Technical data – Robot: Type: TX90XL Axes: 6 Payload: 4 kg Reach: approx. 1,400 mm Repeatability: ±0.035 mm Protection class, wrist: IP65 / IP67 Mounting: Floor / Wall / Ceiling Weight: approx. 115 kg Technical data – Controller: Controller: Stäubli CS8C Software: VAL3 Programming languages: VAL3, PLC IEC 61131-3 Interfaces: Ethernet, fieldbus, digital I/O, serial interfaces Rodpfxezix Uis Akijch Supply: 3 × 400 V, 50/60 Hz Power consumption: approx. 2000 VA Protection class: IP20 Weight, controller: approx. 50 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) Stäubli TX90L robot arm CS8C controller Original teach pendant Connection cable (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Instrument Systems Instrument Systems LED Measurement Laboratory CAS140C, LEDGON 100, Integrating Sphere, Keithley 2611 – Complete System! For sale is a complete, professional LED measurement laboratory from Instrument Systems (Konica-Minolta Group). The system is suitable for the precise optical and electrical characterization of LEDs, LED modules, and small luminaires. All devices come from a laboratory environment, manufactured in 2007–2008, and represent high-quality industrial measurement technology. Scope / included components CAS 140C-152 Spectrometer (2008) Integrating Sphere ISP250-110 + ISP250-211 (2008) LEDGON 100 Goniophotometer (2007) CSD315 3-axis Controller + Emergency Stop Control Panel (2007) Keithley 2611 SMU / SourceMeter PC system including software: SpecWin Pro SpecWin Light Goniometer module Original license CDs User manual “LED test sockets” Cables & accessories as shown in the photos Technical features Measurement of total luminous flux (lumens) Spectral analysis (color temperature, CRI, xy, spectrum) Goniophotometric angular measurement Analysis of radiation patterns Electrical control and IV measurements with Keithley 2611 Fully automatic measurement sequences with SpecWin Pro CAS140C: approx. 36×15×30 cm / 7–9 kg Integrating Sphere: approx. 40×40×45 cm / 6–8 kg LEDGON 100: approx. 80×30×28 cm / 12–15 kg CSD315: approx. 42×12×35 cm / 5 kg Keithley SMU: approx. 36×9×28 cm / 5 kg Dimensions / weights (total approx. 40–45 kg) Rcjdpezimaajfx Akieh Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Thermo Fisher Scientific Thermo Fisher Scientific Flash 2000 CHNS O Analyzer with 2 x AI AS 1310 Autosamplers For sale is a used Thermo Fisher Scientific Flash 2000 elemental analyzer. The unit is equipped with two AI AS 1310 autosamplers. It is designed for automated laboratory operation. The system is used for elemental analysis in the laboratory. Sample introduction is performed via the installed autosamplers. This enables continuous and automated operation. Equipment and features: Thermo Fisher Scientific Flash 2000 CHNS O Analyzer 2 x AI AS 1310 Autosamplers Front display with status fields for operating states Gas connections for He and O2 RS232 interfaces and other device interfaces Connections for autosamplers and additional modules Power connection 230 V Accessories and parts as shown in the pictures Technical data: Manufacturer: Thermo Fisher Scientific Model: Flash 2000 Voltage: 230 V AC Frequency: 50-60 Hz Fuse: 2 x 6 A Power: 1400 VA Redpfey D Sqvox Akiech Autosampler: Model: AI AS 1310 Supply: 24 V DC Power: 46 W per unit Serial numbers: 420126446 and 420126487 Dimensions (approx.): Main unit: Width approx. 55 to 60 cm Depth approx. 55 to 65 cm Height approx. 50 to 60 cm Overall width with 2 autosamplers approx. 100 to 120 cm Weight (approx.): Main unit: approx. 45 to 60 kg Autosampler: approx. 8 to 12 kg each Total: approx. 60 to 80 kg Condition: Used, with typical signs of wear and tear due to age and use. The condition corresponds to the pictures. Scope of delivery: Flash 2000 Analyzer 2 x Autosamplers Accessories and cables as shown in the pictures Important note: All information has been provided to the best of our knowledge, based on the pictures, nameplates, and manufacturer information. The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by phone.

Condition: used, Keysight Mixed Signal Oscilloscope / Digital Storage Oscilloscope Keysight / Agilent InfiniiVision MSO-X 3034A 350 MHz Mixed Signal Oscilloscope with 4 analog channels, 16 digital channels, and 4 GSa/s sampling rate For sale is a used Mixed Signal Oscilloscope from the manufacturer Keysight Technologies / Agilent Technologies. The device is suitable for precise signal and measurement tasks in development, laboratories, service, training, research, as well as industrial electronics and quality assurance. Technical data Manufacturer: Keysight Technologies / Agilent Technologies Type: MSO-X 3034A Series: InfiniiVision Device type: Mixed Signal Oscilloscope / Digital Storage Oscilloscope Bandwidth: 350 MHz Analog channels: 4 Digital channels: 16 Max. sampling rate: 4 GSa/s Display: Color display MegaZoom technology Inputs: 4x analog BNC inputs Digital input / Logic connector USB port USB Device / USB Host Trigger Out Ext. Trigger / Calibration connector Power connection: 100 - 240 V AC 50 / 60 Hz Power consumption: max. 100 W Dimensions: approx. 381 × 204 × 142 mm Weight: approx. 4 kg Features Large color display Front-panel control buttons 4 analog channels 16 digital channels USB interfaces Trigger functions Analysis functions Measurement functions Storage and printing functions Carrying handle Accessories as shown in the pictures Application areas Electronics development Laboratory Service Troubleshooting Signal testing Printed circuit board testing Training Research and development Quality assurance Industrial electronics Scope of delivery Keysight / Agilent InfiniiVision MSO-X 3034A 3x probes as shown in the pictures Rodpfxezh I Dwj Akisch Power cable Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Device can be switched on Display and operation appear to be functioning properly Test seals / stickers as shown in the pictures are present Weight: approx. 4 kg The table shown in the photos or other items not explicitly mentioned are not included in the sale. Shipping is possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Iridex Type: IRIDEX OcuLight TX Iridex Laser Systems OcuLight TX IRIDEX OcuLight TX Green 2.5 W 532 nm laser system, main console including foot pedal, key, and cables. The OcuLight TX solid-state laser systems emit true green continuous-wave laser light (532 nm) for ophthalmological applications. The OcuLight TX and GLx models are also indicated for otolaryngological applications. Improper use of the laser system can result in undesirable side effects. OcuLight TX Rodjzd Ut Ropfx Akiech Ophthalmology: Retinal photocoagulation Laser trabeculoplasty Iridotomy Iridoplasty Otolaryngology: Stapedectomy Stapedotomy IRIDEX OcuLight TX Green 532 nm Laser Excellent efficiency with a powerful 2500 mW of laser energy provides pulse durations and pulse intervals from 10 to 3000 ms. Offers TrueCW laser pulses for maximum control and precision. Flexible range of delivery devices and a wide selection of handpieces for different surgical procedures. Optional remote control and wireless foot switch to reduce clutter and improve ergonomics and control. Quiet operation eliminates distractions. The lightweight, portable design is easily transported between treatment rooms and offices. IRIDEX OcuLight TX Green 532 nm Laser Green treatment laser: 532 nm Target laser: nominally 632 nm Cooling: On-demand whisper fan 10–3000 ms exposure duration and repetition interval Compatible with EndoProbe, LIO, OtoProbe, and SLA Power output: EndoProbe 0–2000 mW, LIO 0–2000 mW, OtoProbe 0–2500 mW, SLA 0–1800 mW Weight: 6.4 kg Length: 15 mm Width: 30 mm Height: 30 mm Condition: used Scope of supply: (See picture) (Subject to changes and errors in technical data, information provided is without guarantee!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Crane motor, travel drive crane bridge drive with gearbox Sliding anchor motor, sliding anchor motor, three-phase electric motor, brake motor, crane motor, cable drive, crane drive, hoist motor, fine hoist motor Manufacturer: DEMAG Motor type: 24/10 KF8-2 Motor No.: 982869 Rcsdpfx Aeptlblskioh Motor type: B5 Rated voltage: 380 VAC Rated frequency: 50 Hz Power stage 1: 0,58 kW = 715 rpm. Power stage 2: 2,3 kW = 2900 rpm. with gearbox DEMAG type KS 12 Reduction gearbox fabric. no. 1909104 gear ratio: i = 118 with impeller for crane rail 2 pieces available, price per piece

Condition: used, Year of construction: 2020, operating hours: 100 h, functionality: fully functional, Key technical specifications • Family / Series: SINAMICS S120 (Booksize C-Type) Rodpfx Ao Agc A Uokisch • Input voltage: 600 V DC • Output voltage / current: Three-phase 400 V AC, 45 A • Cooling: Internal air cooling • Safety: Supports extended Safety Integrated functions • Included accessories: DRIVE-CLiQ cable included • Application: Precise and dynamic control of synchronous or asynchronous motors for machine tools, robotics, or packaging systems.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 100 h, laser type: diode laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 24001, laser hours: 10 h, laser power: 24,000 W, warranty duration: 6 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, nozzle changer, safety light barrier, Standard Equipment Machine - Work area: 4000 x 2000 mm - Enclosed machine frame - Longitudinal conveyor belt - Motion unit for highly precise machining - Gantry drive in combination with linear direct drives - Cooling unit for machine and laser (water-air) - Work area lighting - Positioning laser diode - Spray device - Automatic nozzle cleaning Rjdpfx Akj Afxu Sjisch - Integrated control cabinets - Integrated cabinet - Enclosed beam guidance via laser light cable (LLC) - Machine status indicator - Machine for ambient temperatures up to 45 °C - Transport and assembly device TRUMPF Laser - Excitation via pump diodes - Laser power control Cutting Head - Universal cutting head with fully adaptive lens system - Protective glass - Online condition monitoring of the protective glass - Dynamic Focus Control - Automatic nozzle centering Control System - Fast re-production - SINUMERIK control system - Ergonomic control panel with 21.5″ wide- screen multi-touch color display - Integrated technology data - Automatic shutdown - Programmable gas selection for pressure/cutting - Microweld - Remote support interface - Production plan - Multi-sheet processing - Condition Guide - Cutting Guide Functions - AdjustLine - BrightLine fiber - Smart Nozzle Automation - DetectLine - Drop&Cut - Integrated camera 1 for process monitoring - ControlLine - FlyLine - PierceLine - PlasmaLine - High-speed cutting package - High-speed cutting package Eco - Copper cutting package - Brass cutting package Data Transfer - USB interface - RJ-45 network interface - Online Update Manager Safety - CE marking and EC Machine Directive - Light barriers - Multi-chamber extraction system - Electric roll-up roof - Machine enclosure with certified viewing window door on the right and left Extended Standard Equipment - Compact dust collector - Support strips made of structural steel - Automatic pallet changer in longitudinal direction (standard/heavy-duty) - Nanojoints - Smart Rerun Extended Machine Equipment Extended Laser Equipment - External solid-state laser TruDisk 24001 with BrightLine fiber - Separate laser power supply Additional Cutting Packages - High-speed cutting package Eco - Sheet thickness extension cutting package Extended Machine Equipment - Machine for ambient temperatures up to 45 °C - Prefilter for gases N2 + O2