Cable stripping machine for sale
Identified location: (US) (Edit)
Maximum Cable Diameter : Ø 90mm
Minimum Cable Diameter : Ø 5mm
Cutting Speed : 10 m / min
Electric Motor Power : 4 kW
Machine Dimensions : 70cm x 131,5cm x 119cm
Cpkcxjce
Machine Weight : 460 kg more
MODEL: MLK 201
Npjvz
DIMENSIONS (cm) 185 X 120 X 150 CM
WEIGHT (Kg) 450 KG
CAPACITY : FROM 1 MM TO 90 MM
MOTOR POWER (kW-rpm) : 4 KW 5,5 HP more
CABLE STRIPPER MACHIME MULTI BIG MAX 60
Applicable cable diameter: 1-60 mm
Maximum isolation widht: 11 mm
Cutting speed: 48 m/ min
2 shaft with 11-7 round blades
13 input hole
Bhfzf7mm3l
Motor: 230 V/ 3000 W
Dimensions: 750 x 680 x 860 mm
Weight: 95 kg
CE certified more
used
Bolt firing device, bolt gun, peeling device
-Beveling Tool
-230-250V, 690W
-Dimension 320/145 / H290 mm
-Weight 6.7 kg
Gvwq0w more
2020
new
Model: MLK 103-120
Capacity: 2000 Kg/h – 3000 Kg/h
Bgv3fwiru
Dimensions: 190X580X230 cm
Weight: 12000 kg
Blades: 45 Döner 2 Sabit
Motor: 90 kW more
Stripping machine Tekuwa; condition as is; incl. cable storage DR 200 E.
At this point we would like to point out that all offered machines are in our unrestricted possession or access and are available in our warehouse.
Visits and demonstrations are possible by appointment in our premises.
Gwmggg
We would also be pleased to inform you about our complete stock, as only a part of our portfolio is shown here. more
ELECTRICAL STRIPPING MACHINE for PP / PET – STRIPS
Bkxs2ix
interlocking-process - welding-interlocking
strip width 5 – 13 mm
strip thickness 0,40 – 0,70 mm
core diameter 280 mm
strip qualitiy PP / PET up to 9 mm
strip tension 0 – 600 N (continuously adjustable)
strip transport - 4,5 m/s adjustable
machine data:
capacity 150 kg
table dimension (l x w) 760 x 540 mm
minimal package dimension (w x h) 55 x 20 mm
weight 72 kg
required space 885 x 630 mm
height 750 – 900 mm (continuously)
rolls 4 gui... more
Cable scrubbing machine with brush
The cable TT4045G scrubber is ideal for economical cleaning of medium-sized surfaces and suitable for the special cleaning. The filling of the machine via the Numatic QuickFill system directly from the faucet. The machine comes with a folding brush head for the simple exchange of technical data:
Suction motor 1200 W
Brush motor 1500 W
Nominal voltage 230 V AC 50 Hz
Brush RPM 150 rpm.
Brush diameter 450 mm
Paddurchmesser 406 mm
Fresh water tank 40 litre
Cable 2... more
Automatic machine for cutting and stripping multicore cables
Bcz2vsoryk
Technical data;
-Min. 45 mm length, Max. 100 m,
-Min. 0,5 mm max diameter 9 mm - maximum conductor cross section 16 mm2 - speed - max. 1 m / sec.
-Power supply 220 V.
-Air pressure 6-8 bar.
-Dimensions of 1100 x 590 x 600.
-Weight approx. 70 kg. more
2020
new
Model: MLK 102-80
Capacity: 800 Kg./h – 1000 Kg./h (Standart Besleme Yapılır ise)
Npjvp
Dimensions: 190X400X230 cm
Weight: 5000 kg
Blades: 35 Döner 2 Sabit
Motor: 55 kW more
Weresch Automat R-200 Automatic Cut & Bend Machine / Cable assembly
Cw0sfiz2k
Typical signs of use
Delivery as shown. more
1990
ready for operation (used)
Frequently used but fully functional Yngves Mekaniska K74-1 Superior with used replacement knives. Built around 1990. Still in use today.
Nzruf more
1- Capacity 750-1100 KG / 1 hour
2- 55kw (75 hp) engine
3- 15 + 2 blade
4- Blades brand Sweden sverker 21
5- 2,3 and 4 mm chrome grills
6- PLC touch control panel
7- All electrical system Simens and Schneider
8- 2 italivibras vibro motor
9- Bosch Rexroth hydraulic system
10- SKF roller bearing
All our machines are CE certified. Because we are a manufacturer, we have varieties. It is possible to test our products in our factory. We have different capacity machines as well and we produce compete ... more
Cable scrubbing machine with brush
The very compact and manoeuvrable cable scrubbing machine TT1840G is ideally suited for use on small areas. The device is characterised by an outstanding cleaning performance and a vibrating suction behind the brush! The easy handling and easy transport by the reversible drawbar and the detachable water tank are further advantages of the machine
Technical data
Suction motor 300W
Brush motor 400 W
Nominal voltage 230 V AC 50 Hz
Brush RPM 150 rpm.
Beaf7wpk08
Br... more
please contact for details.
Bhsro8w0ck more
1- Capacity 1000-1500 KG / 1 hour
2- 90kw (120 hp) engine
3- 25+ 4 blade
4- Blades brand Sweden sverker 21
5- 2,3 and 4 mm chrome grills
6- Omron PLC touch control panel
7- All electrical system Simens and Schneider
8- 2 italivibras vibro motor
2eeu8rja
9- Bosch Rexroth hydraulic system
10- SKF roller bearing
All our machines are CE certified. Because we are a manufacturer, we have varieties. It is possible to test our products in our factory. We have different capacity machines as well and we ... more
2018
ready for operation (used)
Machine for peeling onions
Technical parameters:
- manufacturer: GOLDEN MACHINE
- machine type: 2-row
- capacity: approx. 0.4 - 0.6 tons / h
- year of production: 2018
Condition: used, operational
Bkvxbvftpd
Machine location: 33-340 Stary Sącz, Poland more
Eyeletting machine for advertising banners
The device is in perfect condition, ready for work.
Technical data:
1 head
laser indicator
Bmsoeumt9b
Foot pedal operated more
American connections (USA)
max. 150 PSI
120V / 60 HZ / 1 PH / 10A
Cqblnrqc
6 GAL (Galones) - 22,7 l (Liter) more
FOD Milling and copling machine. DFPA 40 horizontal profile milling machine
Manufacturer FOD
Model / type of machine. Horizontal profile milling machine DFPA 40
Year of production 1989
Category of machines. Milling and copier
Location
Gorzów Wlkp.
Conditions of delivery
own collection
Cost of delivery
Customer cover
Start type
to be agreed
Description
Comments
Destiny:
The DFPA 40 horizontal milling machine is a universal machine tool with a wide range of applications in the furniture and ... more
Manual or NC downfeed control
Working area X/Y/Z 300/600/500 mm, grinding wheel Ø 355 mm,
motor 3,7 KW, speed 1750 rpm., dimension 3100x1900x2200 mm,
weight ca. 2200 kg, digital read out, compl. hausing, 4 wheel flanges,
instruction manual, Installation pads; run only with oil.
with magnetic chuck + coolant system
G0szoun more
Ingersoll Hansen Center 300 EDM CNC Erodiermaschine
Hersteller [manufacturer]: Ingersoll Hansen
Typ [ type]: Center 300
Steuerung [control unit]: MultiPulse Control
Baujahr[construction year]: 1997
+ Inkl. Handheld
+ Inkl. EROWA Preset Comfort 3D-22 / Robot X system EDM dynamic tooling system (optional)
+ Inkl. EROWA 3-D Koordinatenmesssysem (optional)
Vollständige Dokumentation ist vorhanden.
Besichtigung unter Strom kann kurzfristig erfolgen.
Für weitere Fragen stehen wir Ihnen gerne zur... more
Vertical Machining Center
Manufacturer: XYZ Machine Tools
Type: 1020 VMC
Hdrb8nd
Year of construction: 2014
Control: Siemens 828
X axis: 1020 mm
Y-axis: 520 mm
Z-axis: 546 mm
Table: 1120 x 500 mm
Max. table load: 800 kg
spindle speeds: 60 - 8000 1/min
Recording: BT 40
tool changer: 24 Pl
Space requirement: 2650x2105x3020 mm
Weight: 5,800 kg more
AVAILABLE ON REQUEST
brand-new CNC cycle lathe
Manufacturer STYLE, type Style 750 with CNC control STYLE
Service for commissioning etc. from
- Munich / Germany
- Erwitte / Germany
- Netherlands
Developed for individual parts and small series
Simple and intuitive operation
Modern, ergonomic and encapsulated design
Different models with turning diameter from 300 - 1200 mm
centre distances between 500 and 5000 mm
Precise double prism guide
Stable cast iron bed with double prism
Full enclosure wi... more
milling machine for arches
swiveling milling spindle machine
It has for the transport of feed is used for milling
arc elements
Wucxmcy3c
Special machines more
1984
ready for operation (used)
The single-column turning-boring lathe model 1512 is a universal machine designed for processing a variety of products from ferrous and non-ferrous metals in conditions of small-scale and serial production.
Model 1512 is the most widespread among boring lathes in the territory of the former USSR. The machine allows turning parts up to 1250 mm in diameter, up to 1 meter in height and up to 3200 kg in weight. The machine has been exported to many countries around the world.
The following operatio... more
not much used NC lathe with control Fagor 8055 TC, turning length 895 mm, distance between Centers 1120 mm, Center high 265 mm, swing-Ø over bed 530 mm, swing-Ø over carriage 300 mm, bed width 350 mm, bore Ø 80 mm, spindle speed 48-2200 U/Min., motor 15 KW, dimensions 2300x2000x1950 mm, ca. 3000 kg, incl. 3-jaws chuck Röhm Duro T-315, increased spindle Speed with cooler, steady rest with bearings Ø 80-280, coolant device, 2nd door, manual
Nuehn more
Schwerlastdrehmaschine Meuser Lathe machine Drehbank
Heavy Duty lathe machine
Typ: Meuser
Maschinenzubehör wie auf den Fotos ersichtlich.
Die Maschine stammt aus einer Betriebsauflösung und aus erster Hand.
Aufladung durch uns möglich.
Maschinen/Anlagen Abmessungen ca. in cm. (LxBxH)
Tisch/Maschinenbettlänge: cm
Tisch/Führungsabmessungen:
Bhb3jnuyrj
Maschinengewicht ca.: 14000 kg
Die Maschine befindet sich im Originalzustand.
Für weitere Fragen stehe ich gerne zur Verfügung. Bitte schr... more
2020
as good as new (ex-display)
LEOplus
LEOplus automatic cutting centre 550 mm disc with automatic profile feed robot
APPLICATION:
Used for cutting aluminium, PVC and wood profiles
FUNCTIONS:
⦁ fully automatic operating system
⦁ hydropneumatic cutting
⦁ Automatic positioning. All steps between
-22.5° to +45° with an accuracy of +-0.1 degree
⦁ Industrial PC with Windows, 10" touch screen and easy, practical interface
⦁ Precision slicing function
⦁ Big memory
⦁ Adjustable disc stroke speed
⦁ Automatic cutting with previous
... more
2006
good condition (used)
Table surface 1000 x 280 mm; x- approx 500 mm; y- approx 240 mm; z- approx 500 mm;
feeds and rapid traverse on X and Y; n vertical head= 90-2000 1/min; ISO 40 holder; quill travel 120 mm; motor 400 Volt; 2,2 KW; weight= approx. 1150 kg.
Upper beam horizontally adjustable and rotatable; vertical head swivels, 2 sides
Chip protection and safety cover, halogen lamp, central lubrication; chip tray;
G7bfuc3nu
Combination milling cutter holders; Drill chuck holders; Cutter head with holder; Clamping
G... more
Modular drilling machine GOMAD WU 2 C 2 G 2 T 2020 new machine
Location
Gorzów Wlkp.
Conditions of delivery
OWN COLLECTION
Cost of delivery
Customer cover
Startup Type
to be agreed
Description
Comments
Double-sided WU multi-spindle drills are designed for making holes for dowels in wood, chipboard and wood-based materials.
The WU drill has three drilling units - two vertical and one horizontal side, which allows drilling three rows of holes simultaneously.
WU
Number of drilling units rig... more
2014
refurbished (used)
We are selling full automatic packing machine for wood pellet production. This machine is making the bags by him self and is very precise. In this set is coming also a robot peletizer who is fill automatic. He takes the ready pallet move to zone of arrangement and start to arrange the gags. The capacity ot this line is till 6tonnes per hour.
Pupi0i more
OMRON CPM1A control, 4 stations.
Target machine for assembling and compressing door glass modules.
Gc9xq2pzc
Price is a net target price, a matter of final price agreement
Purchase, acquisition, asset management of industrial equipment and machinery.
Wide range of used machinery, industrial equipment more
2020
as good as new (ex-display)
ALCOR I
THREE-AXIS CUTTING CENTRE CONTROLLED BY CNC
APPLICATION: For cutting aluminium, PVC and wood profiles, blade Ø 550 mm.
MAIN FEATURES:
Bhnmtuzyvf
- Precise cutting at any angle between 30° and 150°
- Up to 7 profiles can be loaded
- Waste treatment capacity of more than 800 mm for new production
- No waste cutting
- CNC control, touch screen
- Data transfer via remote network connection, Internet and USB
- Remote access
- Pneumatic maintenance system
- High processing capacity to increase... more
Europa VS660 Gap Bed Centre Lathe with 660mm swing x 1500mm between centres. Equipped with Fagor 2 Axis DRO, 3 jaw chuck. Quick change toolpost and toolholders. Large capacity, heavy duty lathe
Specification
Europa VS660
Centre height 330mm
Distance between centres 1500mm
Swing over bed 660mm
Swing over cross slide 430mm
Spindle bore (max. bar dia) 104mm
Spindle nose mounting D1-11 Camlock
Taper in spindle bore No. 7 Morse
Swing in gap 860mm
Width of bedways 480mm
Total travel of cross slide 390... more
Machine for the construction of houses
N2qhcrv7g
The machine consists of feed before and after the saw, milling and drilling machines, drills, mills and cut the angle of the beam in the construction of houses more
vice
Make Chick machine tool
Length 500 mm
Width 150 mm
Height 130 mm
Weight 22 kg
Age estimated
Jaw width 150 mm
Bgoxj0wamo more
Radial drill press in good condition.
With motorized boom (Up / Down)
Morse taper 4
Travel on the boom: 725 mm.
Travel on spindle: 270 mm.
32 - 2500 rpm.
0.06 - 0.8 mm / rpm feed rate.
Spindle diameter: Ø65 mm.
Max height between table and spindle: 995 mm.
Total dimensions: 180 x 85 cm.
Height: 248 cm. (Transport height: 228 cm)
Bnxo2cb more
FERMAT machine tool, s.r.o., Prague / Czech Republic
Fk2zobn
Universal cylindrical grinding machines BHC 63 CNC with cast iron bed * max loop length of 6,000 mm * swing up to 1,000 mm * workpiece weights up to 5,000 kg (with Bezel)-general product description
Machine base made of cast iron
Machines are with control Siemens 840 d sl (828 D sl) or B + R delivered power Panel 900.
Remote Diagnostics free to current warranty and beyond!
CNC Schleifscheibe Abrichtung
Reference visits throughout Germ... more
2020
as good as new (ex-display)
DELTA III
Automatic slicing saw , blade Ø 450 mm, PLC control system
APPLICATION:
For cutting aluminium, plastics and wood profiles
MAIN FEATURES:
- Shield 450mm
* minimum slice thickness 5mm
* maximum slice thickness at one time 750mm
- Safe cuts thanks to the cover with safety sensor
- Automatic terminal system
- Cutting speed control
- Digital adjustment of the blade extension according to the width of the cut profile
- Feeding of profiles with a system that prevents them from being damaged... more
Sweeper applied 414 RS Nr. 5, year 2011, B-92594, 3019 operating hours, 2 cylinder diesel Kubota Z483E, 9 kw, 6 km/h, sweeping width mm 1140, forward and reverse, covering scratched and eigerissen, marker lamps broken broom arm bent down
Bbxodmlric more
Woodturning lathes Gomad Dnxa Second hand 1989
Make:
Gomad
Model:
Dnxa
Description:
Lathe GOMAD DNXA
location
Gorzow Wielkopolski
Terms of delivery
Pick your own
Cost of delivery
J3hwdr
Application
Startup Type
Application
description
Comments
Lathe GOMAD support length 1000 mm Diameter 400mm
Cpjqktfs
Year:
1989 more
Complete automatic system for the production of conical buckets, Hobbocks, 10/15/20/25 l
Diameter bucket top 285 mm
Diameter bucket bottom 272 mm
Production capacity approx. 50 pieces/min
The plant has been completely overhauled, is in a very good operational condition and is still in production!!!
Noyit
If necessary, a complete assembly and commissioning can be offered to the buyer!!! more
Washing room dimensions: 900x700x3000mm, max. parts weight: 500kg, door aperture: 750x3080mm, for the internal and external cleaning of profiles, pipes or tubes, control: Siemens Simatic S7.
7frxlmtlt more
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Machineseeker now also sponsering Greuther Fürth
10 valuable tricks for buying used machines online
New Machineseeker.com TV commercial with Michael van Gerwen
Photo gallery: The World's 10 biggest excavators
Sponsorship of Michael van Gerwen and TV advertising