4
Throughput: 300-350kg/h depends on sorting and kind of cables
Pre shredded cables up to 400kg/h
Connected load: 33 kW
Measurement: l x w x h ca. 4,0 m x 1,6 m = 6,4 m²
Input: Cable lengths up to max. 0,8m
K8vmurpuy
Diameter up to ca. 40mm
Single wire up to ca. 10mm m²
3
Maximum Cable Diameter : Ø 90mm
Minimum Cable Diameter : Ø 5mm
Cpkcxjce
Cutting Speed : 10 m / min
Electric Motor Power : 4 kW
Machine Dimensions : 70cm x 131,5cm x 119cm
Machine Weight : 460 kg
2
Throughput: 300 - 350kg/h depends on sorting and kind of cables
Pre shredded cables up to 200 - 400kg/h
Connected load: 33 kW
Measurement: l x w x h ca. 4,0 m x 1,6 m = 6,4 m2
Input: Cable lengths up to max. 0,8m
Diameter up to ca. 40mm
2pshmm
Single wire up to ca. 10mm2
13
Bottle preparation plant of the IKV GmbH from Premnitz
For more than 10 years IKV GmbH has been recycling PET bottles for the production of high-quality flakes for the production of regenerated fibres or for the production of strapping bands.
The plant has been successfully operated for many years. The plant was taken out of operation as fully functional.
The plant can be used in both semi-continuous and fully continuous operation.
The line was modified to meet the changing bottle qualities on t...
Model 180 granulator
GHIBLI 403 turbine mill
Cyclone dust collector
SA 200 densimetric separator (air separating table)
Electrical cabinet
New control system with a touch panel
1.5 kW refrigerator
Bncsvjykig
Input capacity max: 200 - 250 kg / h
Purity of starting material: 98%
Number of fixed knives granulator: 2
Number of rotary knives granulator: 24
Number of rotary knives in the turbine mill: 36
Standard screens - perforation: Ø 2/3/4/5 mm
The KOMBI line has been designed specifically for rec...
Model: MLK 103-120
Capacity: 2000 Kg/h – 3000 Kg/h
Dimensions: 190X580X230 cm
Weight: 12000 kg
Bgv3fwiru
Blades: 45 Döner 2 Sabit
Motor: 90 kW
6
This listing is for a 2006 LODIGE FKM 600 D Tablet Recycling Plant.
Includes:
- GOUGH Bucket Elevator
- NERAK Bucket Conveyor
- NERAK Bucket Conveyor
- NITCHI EMT-5 Electric Hoist 2000kg
- FLOMAT Vibratory Bag Discharge Unit
- LODIGE FKM 600 D Ploughshare Mixer
- ROTEX SFH26 Vibratory Feeder
- ROTEX 11M SS/SS Vibratory Screener
- K-TRON WF 300 Weigh Belt Feeder with upgraded KCM Control
- NITCHI EMT-5 Electric Hoist 2000kg
- FLOMAT Vibratory Bag Discharge Unit
- K-TRON WF 300 Weigh Belt Feede...
1
It is a cable granulation plant as good as new, consisting of conveyor belt, shredder, spiral bunker and spiral conveyor, granulator, screw ventilator, helix silo, separator plastic/copper, magnetic separator, filter system and double screen. The control technology is from siemens Germany. A detailed description of the services will be sent by email if interested.
Bozlzqajwx
9
Concrete recycling plant complete
2sh82a
15
RECYCLING PLANT FOR THE PROCESSING OF BOARDS AND ELECTRICAL AND ELECTRONIC COMPONENTS TO OBTAIN NEW PRODUCTS.
COMPOSITE: ELECTROLYTIC MACHINES
GAS PURIFICATION SYSTEMS
PURIFICATION TOWERS
LINGOTERS
FURNACES AND CRUCIBLES
CRUSHERS RAW MATERIAL
CONVEYORS
CENTRIFUGES
Bjiest9ejj
CALCINATOR
STEAM GENERATOR
COOLING TOWERS
CASTING MACHINES
LABORATORY
CHEMICAL DEPOSITS
GRINDING MILL
3
Water separator with a double trough for recycling cables and materials of various weights with a capacity of 800 kg / h. The machine is new.
Blraiayrnc
Model: MLK 102-80
Capacity: 800 Kg./h – 1000 Kg./h (Standart Besleme Yapılır ise)
Dimensions: 190X400X230 cm
Weight: 5000 kg
Npjvp
Blades: 35 Döner 2 Sabit
Motor: 55 kW
1- Capacity 750-1100 KG / 1 hour
2- 55kw (75 hp) engine
3- 15 + 2 blade
4- Blades brand Sweden sverker 21
5- 2,3 and 4 mm chrome grills
Pgaowyfz
6- PLC touch control panel
7- All electrical system Simens and Schneider
8- 2 italivibras vibro motor
9- Bosch Rexroth hydraulic system
10- SKF roller bearing
All our machines are CE certified. Because we are a manufacturer, we have varieties. It is possible to test our products in our factory. We have different capacity machines as well and we produce...
1- Capacity 1000-1500 KG / 1 hour
2- 90kw (120 hp) engine
3- 25+ 4 blade
4- Blades brand Sweden sverker 21
5- 2,3 and 4 mm chrome grills
6- Omron PLC touch control panel
7- All electrical system Simens and Schneider
8- 2 italivibras vibro motor
9- Bosch Rexroth hydraulic system
2eeu8rja
10- SKF roller bearing
All our machines are CE certified. Because we are a manufacturer, we have varieties. It is possible to test our products in our factory. We have different capacity machines as well and we ...
12
The system can be loaded onto a truck with a forklift and is ready for operation in just a few simple steps.
A 16A socket is required.
Bkpbdyubfi
Total dimensions of the system LxWxH 3.5 x 1.06 x 2.98m (ready for operation)
Precondition for the separation are differences
in the material like:
- Different sizes of particles
- Differences of the density
- Differences in the surface condition of the particle
- Differences in the form of the particle
- Grain size 0.1mm-30mm,
(bigger particles are po...
6
Zig Zag Air Sifter
Sizes/ wides from 200mm - 1800mm
Precondition for the separation are differences in the material like:
- Different sizes of particles
- Differences of the density
- Differences in the surface condition of the particle
- Differences in the form of the particle
- Grain size 0.1mm - 40mm, (bigger particles are possible with a special design)
We are the manufacturers of these plants and we build Zig Zag Sifter Plants in different sizes see attachment.
In order to make you a de...
14
Hydraulic Shredder
Iggesund recycling 500/1700
No. 88 06 11
Hours 3470
Bp332ouk0c
Diameter rotor 500mm
Rotor length 1700mm
Bucket width 1060mm
Feed roller 1 180 * 300mm
Feed roller 2 140 * 300mm
1 Hydraulic motor 45kW
2 Hydraulic motor 110kW
3 Hydraulic motor 45kW
1
Alligatorschere JMC 320
brand new
AVAILABLE NOW, ex work IUT Beyeler AG,
Bl9bn9pd3j
DE-06188 Landsberg
6
workpiece diameter: 6000 mm
load capacity: 125 t
total power requirement: kW
Begqqagnov
Total weight, approx.: 5600 kg
dimensions L x W x H: 5,2 x 1,35 x 1,1 getrieben m
dimensions L x W x H: 1,9 x 1,0 x 1,1 mitlaufend m
to revolve large round containers/objects. (welding positioner+manipulator)
Consists of welded steel construction.
- 2 mounting brackets, motor-driven, adjustment travel approx. 500mm by hand crank, max. centre distance = 1800mm, impeller size Ø x width: 650 x 160mm, 1 per moun...
4
Brand new 20L Double Receiver Rotary Evaporator
Izgbbjp
Free installation to Selected parts of the UK
13
Drive power: 110 kW,
blade width: 50 mm,
12158 operating hours,
cutting unit overhauled in Oct. 2020, knives newly armoured
cutterbar size: approx. 1300 x 1100 mm,
Bnknvuczso
total length: ca.4600 mm,
width. 2350 mm,
height: approx. 3600 mm
Kpl. with control cabinet,
total weight. approx. 18 t,
test / demonstration possible by appointment
11
*All of our products are made with care and covered for 1 year warranty!
*Installation and Operator Training FREE
FABO TURBOMIX Full Automatic Mobile Concrete Batching Plants are ideal solutions for the projects that require short term and a compacted settlement on a dedicated job site. Since all the equipment of a concrete plant is assembled on a single mobile chassis, the plant can be moved easily by only one truck head. Productivity of TURBOMIX mobile concrete plants vary from 30 m3/h to 150...
4
STATIONARY CONCRETE BATCHING PLANT S160-TWN
GENERAL
Plant Type : Stationary Concrete Plant with TWIN Shaft Mixer
Plant Capacity : 160m³/hour freshly compressed concrete
Mixer Capacity : 6000/4000 lt (4m³ Compressed Concrete)
Total Motor Power : 245kw Standard Value can be changed depending on Equipment..
Voltage/Frequency : 380V/50Hz Standard Value.
SPECIAL PRICE : 170 000 EURO (DELIVERY EX WORKS )
The installation and startup of the plant is under our responsibility.
We provide excellent ...
Description of function:
This trend-setting rotor blade guarantees a fast and clean transfer of compost and other bulk materials. The material is picked up in the same way as with a conventional wheel loader bucket. The rotor is started at the discharge point by means of the automatic control. The hydraulic rear wall pushes the material evenly towards the rotor depending on the rotor speed. The counter-rotating rotor mills off the bucket content, mixing it well and discharging it loosely. This c...
2
These shafts fit perfectly into a 10 -knives Metso/M&J waste shredder and is the perfect choice for shredding MSW, green waste and similar input material where high capacity and a grain size below 200 mm is required
Technical specifications:
Bj0kdpz93s
In production for about 100 hours.
Different models are also available!
1.Bale Size: 400mm x 400mm x ...
2. Printing Box Dimensions (W x L x H): 1000 mm x 2600 mm x 900 mm
3. Loading Bunker Dimensions (W x L x H): 1400 mm x 1850 mm x 500mm
4. Feed opening (W x L): 1000 mm x 1600 mm
5. Capacity: 3-4 tons / hour (Aluminum, 13-15 tons / hour (Copper), 9-10 tons / hour (Steel)
6. Cycle Time: 45 seconds
7. Pre-Compression Push Printing: 120 Ton
8. Secondary Compression Push: 120 Ton
9. Main Compression Push Printing: 220 Ton
B3tzj32
...
14
7
*All of our products are made with care and covered for 1 year warranty!
*Installation and Operator Training FREE
FABOMIX COMPACT series Fixed Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary Concrete Batching Plants can easily and efficiently reach high capacity production of homogeneous concrete mixture.
FABOMIX COMPACT Series have easy operating system and lowest investment costs. In addition, the plant provides the use of en...
4
Plant Type : Compact Concrete Plant with Twin Shaft Mixer
Plant Capacity : 100m³/hour freshly compressed concrete
Mixer Capacity : 3000/2000 lt (2m³ Compressed Concrete)
Central Lubrication System Brand : ILC (made in Italy)
Control System: Full automatic pc - plc – printer.
Electronical equipment : Siemens
Other equipment & accessories : Italian
Unlimited users & Remote access
A very low transport cost : only one container.
The installation and startup of the plant is under our responsi...
9
To separate and sort after the specific weight from light and heavy fraction.
Useable for grain, nuts, etc. see PDF.
Type and size are selectable, depending on the product and throughput.
At constant machine length, it is possible to choose between working width from:
J9eefd8gh
450mm, 600mm, 900mm.
3
American connections (USA)
max. 150 PSI
120V / 60 HZ / 1 PH / 10A
6 GAL (Galones) - 22,7 l (Liter)
Cqblnrqc
4
the JMC McIntyre metal baler type 2035 is one of the smallest balers available in the Market. Standard it has electriv drive but the our stock machine is equiped with a Kubota Diesel drive.
bale size 200x350xvar. mm.
Bh9qppdk03
3
The sink-float separator STF 3.0. is perfectly matched to our high efficiency SP1000 Mk2 centrifuge and together with these centrifuges forms a compact but highly capable washing line that requires little maintenance and can wash/sort up to 3000 Kg/hour of hard plastics.
Bkkumk3lbb
The machines are fully constructed in stainless steel 304 so that salt solutions can be used without any problems. Additional peripherals such as water purification, transport screws and big bag loading stations are ...
6
*All of our products are made with care and covered for 1 year warranty!
*Installation and Operator Training FREE
FABOMIX COMPACT series Fixed Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary Concrete Batching Plants can easily and efficiently reach high capacity production of homogeneous concrete mixture.
FABOMIX COMPACT Series have easy operating system and lowest investment costs. In addition, the plant provides the use of en...
7
COMPACT CONCRETE BATCHING PLANT C60-SNG L
GENERAL
Plant Type : Compact Concrete Plant with Single Shaft Mixer
Plant Capacity : 60m³/hour freshly compressed concrete
Mixer Capacity : 1500/1000 lt (1m³ Compressed Concrete)
Total Motor Power : 110kw Standard Value can be changed depending on Equipment..
Voltage/Frequency : 380V/50Hz Standard Value.
Transport : TWO containers.
The installation and startup of the plant is under our responsibility.
We provide excellent after-sales service.
24/7 S...
3
Ballshaping- and Delaminationmill
Molinator for fine delamination!
Diverse Types: RW VKR16/3 / 22-37kW and RW VKR 22/3 / 75-110kW
Input Composite Material Examples: Regrind from hair-wire, printed circuit boards, electronic circuits, other composited material.
Al / Plastic, Cu / Plastic, Cu / Glass fibre, ABS / Plastic fibres, etc.
Type selection: depending on the material / depending on layer thickness / depending on test‘s / according to the desired throughput.
Description Molinator:
In t...
1
Single shaft Pre-shredder
Cutting area: 2420x1273mm
Grainsize: ᐸᐸ200-450mm
First choice for:
Nzvat
MSW (including bagopening) waste/demolition-wood, C&D, C&I, bulky waste
Also different models avaliable !
1. Bale Size : 400 mm x 400 mm x...
2. Press Box Dimensions ( W x L x H ) : 1000 mm x 2700 mm x 900 mm
3. Loading Bunker Dimensions ( W x L x H ) : 1650 mm x 2300 mm x 800 mm
4. Feeding Opening ( W x L ) : 1000 mm x 1600 mm
5. Capacity : 4-6 ton / h ( Aluminum , 12-19 ton / h ( Copper ) , 11-17 ton / h ( Steel )
6. Cycle Time : 30 seconds
7. Preliminary Compression Thrust : 140 Tons
8. Secondary Compression Thrust : 210 Tons
9. Main Compression Thrust : 290 T...
5
High efficiency friction washer / Centrifugal washer / spinner.
Improved model, easy and cheap maintenance, low downtime during replacement of wear parts.
Pulf2u
Suitable for friction washing and/or drying of grinded plastics.
-Power 22,0 kW
-Throughput 1500 kg/h
-Solid and long lasting concept in stainless steel.
-Brand new, never used.
-Made in Holland
Price on request.
2
One set of 14 knives shafts for Metso/M&J 6000 shredder that will work perfectly wood waste, MSW, green waste and similar types of waste where productivity is in focus and a grain size ᐸ 200 mm is required.
Specifications:
In production for about 500 hours.
Cofxz020
9
STATIONARY CONCRETE BATCHING PLANT S130-TWN
GENERAL
Plant Type : Stationary Concrete Plant with TWIN Shaft Mixer
Plant Capacity : 130m³/hour freshly compressed concrete
Dltzl0wd
Mixer Capacity : 4500/3000 lt (3m³ Compressed Concrete)
Total Motor Power : 168kw Standard Value can be changed depending on Equipment..
Voltage/Frequency : 380V/50Hz Standard Value.
SPECIAL PRICE : 130 000 EURO (DELIVERY EX WORKS )
The installation and startup of the plant is under our responsibility.
We provide e...
5
To sieve dry material: like flour-, grainy-, and granule-shaped material.
Sizes from: wide 500-1500mm / length 1200-2400mm
U3el9pcmu
Sieve layers: 2 - 4 layers, granulation 0,1-18mm freely selectable.
1
Singleshaft Fineshredder with pusher
Rotorlength: 1336mm/Ø665mm
Grainsize: 10-100mm
Capacity: 1-15 ton/hour, Material and grainsize depending
Ejm7vjtzu
8
5
Big-bag filling units are suitable for filling commercial sizes of big bags. Products are metered into the big bag, for example via metering screws, rotary valves or hopper feeder.
Base station:
-Frame size: L150cm x B150cm x H 295cm
-With pneumatic shaking system
-Adjustable height for adapting the unit to various sizes of big bags (manually)
-Easy operation
-Modular constructie
-Perfectly filled bags
-High filling weight
-Firmly upright pockets
-Quick bag change
-made in the Netherlands...
13
The single-column turning-boring lathe model 1512 is a universal machine designed for processing a variety of products from ferrous and non-ferrous metals in conditions of small-scale and serial production.
Model 1512 is the most widespread among boring lathes in the territory of the former USSR. The machine allows turning parts up to 1250 mm in diameter, up to 1 meter in height and up to 3200 kg in weight. The machine has been exported to many countries around the world.
The following operatio...
4
Plant Type : STATIONARY Concrete Batching Plant with TWIN SHAFT MIXER
Plant Capacity: 100m³/ hour freshly compressed concrete
Mixer Capacity: 3000/2000 lt (2m³ Compressed Concrete)
Central Lubrication System Brand : ILC (made in Italy)
Control System: Full automatic pc - plc – printer.
Electronical equipment : Siemens
Other equipment & accessories : Italian
Unlimited users & Remote access
The installation and startup of the plant is under our responsibility.
7/24 SERVICES.
Exporting mo...
6
To separate and sort after the specific weight from light and heavy fraction.
Useable for grain, aluminium/plastic, rubber/textile, cable-recycling, etc.
Type and size are selectable, depending on the product and throughput.
At constant machine length, it is possible to choose between working width from:
450mm, 600mm, 900mm.
Gur3mrb