Used Cable Transporter for sale (20,083)

Condition: used, Entecon conveyor flowveyor cable conveyor aerodynamic transport Tube diameter: 76.1 mm Dwjdpfx Agsx Nymcsfsb Completely stainless steel Total length: 4300 mm In very good condition See our other listings VMA Wekerom

Condition: defective spare-parts repository (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 30038908, overall weight: 15,700 kg, We are selling a damaged machine that requires repair – sold as is, without warranty: Machine: Hedelius Tiltenta – CNC machining center – T7 Magnum 1R 40/530/3200/12 Year of manufacture: 2016 Serial number: 30038908 Weight: approximately 15.70 tons Damages (not a complete list): Ball screw of the X-axis is defective, including bearing, adjusting nut, timing belt, and 2 x adjusting nut KGT. Disc spring package on the fixed stop of the X-axis is defective. Hood of the HSA spindle is defective. Machine terminal is defective. MC screen/hard drive is defective. Slight deformations on the chip conveyor and compression on cable connections. The connecting lines of the terminal are defective and must be completely replaced. The tension bolts of the catching device of the Z-axis must be replaced. The machine geometry can only be measured after the machine has been electrically repaired. Any further damage to the geometry can only be recorded and determined afterward. The energy chain must be replaced. Length approx. 1,400 to 1,500 mm. Whether the Sauter swivel head was damaged during transport can only be determined during commissioning. The vertical slide of the Z-axis is defective and must be replaced. Dodpjzy U Rusfx Agfewb The left door must be straightened. Welding work may be required on the guide. Door switch and emergency stop chain must be checked during commissioning. Straightening work may be required at the pick-up station, as the terminal collided with it. The linear measuring system (LMG) of the X-axis is defective and must be replaced. The machine is sold in its damaged condition as a damaged object requiring repair without any warranties! The machine must be picked up within a short period, no later than week 39, otherwise storage costs will be charged. Sale basis: loaded onto a truck at the Spieß location, 61276 Weilrod Storage costs: from 21.09.2026, to be borne by the buyer.

Year of construction: 2022, operating hours: 15 h, condition: used, functionality: fully functional, operation weight: 30 kg, feed force X-axis: 20,000 N, pipe diameter (max.): 14 mm, machine/vehicle number: 79000, Lancier Smart Wheel 2022, used very little Very few operating hours (approx. 38 hours) Includes extensive accessories Includes HONDA EU22i generator Includes cable guiding set 2.6 mm - 3.7 mm Includes cable guiding set 6.7 mm - 9.0 mm Includes drive wheel set without groove 0.8 - 3.4 mm Includes drive wheel set with groove 3.5 - 9.0 mm Includes steel transport box Includes compressed air hose with claw coupling, 10 m Dsdozphdtspfx Agfjwb The blowing device Automatic logging For cable diameter 1.5 - 9 mm For outer pipe diameter 7 - 14 mm Blowing speed 0 - 100 m/min Thrust force 20 daN L x W x H 500 x 400 x 400 mm Weight: approx. 30 kg Order no. 79000

Condition: excellent (used), Year of construction: 2021, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: 2021-1504-QN, High-end metal separator for inspecting bulk materials in free fall Material: stainless steel 304 Surface: sandblasted Sensing tube material: PE, anti-static, food grade Rejector: single flap type RH Protection rating: IP66 Electronics assembly: detached Dedjzvwlmepfx Agfswb Control electronics cable length: 3 m Nominal width: 150 mm Orientation: vertical, top to bottom Power supply: 100-240VAC 50-60Hz LNPE - Without power cable Pressurized air supply: 6-10 bar Expected sensitivity: FE: 0.4 mm NE / Al: approx. 0.4 to 0.56 mm Stainless steel: approx. 0.4 to 0.72 mm Electronics outside ATEX Zone Inside: Zone 20 within metal separator (pipe) = II 1 D Ex h IIIC T135°C Da Outside: Zone 22 surrounding metal separator = II 3 D Ex tc IIIC T135°C Dc IP65 QUICKTRON 07 RH metal separators are used for inspecting powders and granules in free-fall lines. They are available in nominal widths up to 300 mm and can therefore cover all application areas, from the laboratory to truck loading. Their hygienic design and easy cleaning prevent cross-contamination between product batches. Depending on the requirements, they can increase process safety or fulfill the task of outgoing goods inspection. Mesutronic metal detectors use state-of-the-art technology to protect your production, your reputation, and your customers from damage caused by metallic foreign objects. Digital signal processing, combined with innovative evaluation methods, comprehensive self-monitoring, and ease of operation, ensure the optimal function of the system and the successful completion of all types of audits. The devices are complemented by an extensive range of accessories and variants, from multi-frequency technologies to test bodies and material certificates. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or in the production plant in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging.

Condition: used, Year of construction: 2008, functionality: unexamined, overall weight: 1,270 kg, load capacity: 210 kg, arm reach: 2,650 mm, pivoting range: 360 °, controller manufacturer: FANUC, controller model: R-J3iB, teach pendant manufacturer: FANUC, teach pendant model: A05B-2452-C154 (abgebildet), input voltage: 380 V, type of input current: three-phase, repeat accuracy: 0.3 mm, A total of 7 FANUC R-2000iA/210F heavy-duty industrial robots are for sale. Available years/months: - 2 units: 08/2006 - 1 unit: 06/2007 - 3 units: 02/2008 - 1 unit: 03/2008 Individual sales are possible. The stated price applies net per unit, EXW Kirkel. For the purchase of multiple units, we offer an additional package discount upon agreement. Technical data: - Design: 6-axis articulated arm robot, floor mounting - Maximum payload at the wrist: 210 kg - Reach: 2,650 mm - Repeatability: ±0.3 mm - Mechanical weight of the robot: 1,270 kg - Axis speeds J1–J6: 95 / 90 / 95 / 120 / 120 / 190 °/s - Protection rating: Wrist and J3 arm IP67, other robot parts IP54 - Controller: FANUC SYSTEM R-J3iB - Controller power supply: 380–415 / 440–500 V AC, 3-phase, 50/60 Hz, 12 kVA - Weight of the FANUC control cabinet: approx. 180 kg - Teach pendant / handheld device included Dedpfxezzr I To Agfowb Scope of supply as shown in the images or upon agreement: - FANUC R-2000iA/210F robot arm with base - FANUC R-J3iB controller - FANUC teach pendant - Connection cables - Bosch Rexroth control cabinet with PSB6000 component shown in the photo for the pictured package The photos show an example unit from 02/2008 (robot type A05B-1324-B215). Equipment, nameplates and scope of supply may vary per unit and will be confirmed before the sale. Condition: used, with visible signs of wear and tear as well as paint damage due to age and use. The robots were functional until the time of dismantling. No further functional testing was carried out after dismantling. Therefore, the functionality is indicated as unverified for precautionary reasons. Operating hours are not documented. Price net, EXW Kirkel. Loading and organization of transport are possible for an additional charge and upon prior agreement. The transport costs depend on the destination and scope. Sale subject to prior sale.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 7,308 h, functionality: fully functional, machine/vehicle number: KJFE012284, number of ink cartridges: 11, color channels: 11, number of print heads: 1, resolution (max.): 28,801,440 dpi, paper weight (min.): 80 g/m², paper weight (max.): 500 g/m², paper width (min.): 200 mm, paper width (max.): 1,120 mm, paper height (min.): 127 mm, paper height (max.): 15,000 mm, number of feeding trays: 3, total length: 1,864 mm, total width: 667 mm, total height: 1,218 mm, space requirement length: 1,900 mm, space requirement width: 710 mm, space requirement height: 1,250 mm, counter reading (color): 3,422, year of last overhaul: 2026, type of input current: AC, input current: 1 A, input voltage: 240 V, Equipment: raster image processor, For sale is an Epson Stylus Pro 9900 SpectroProofer with an integrated X-Rite SpectroProofer powered by X-Rite. This is a 44" wide-format, fine art, and proofing printer from a professional photo studio, in well-maintained condition and ready for immediate use, with a current service report dated July 23, 2026. The unit is ideally suited for fine art printing, photographic printing, proofing, graphics and pre-press, advertising technology, CAD/GIS, as well as high-quality poster and art prints, also for museums, galleries and professional photographers. The model uses the proven Epson UltraChrome HDR-11 color pigment ink system and achieves a print resolution of up to 2880x1440 dpi. It handles media up to 44 inches (111.8 cm) wide and paper thicknesses up to 1.5 mm. The printer is ideal for photographers, print service providers, artists, advertising technology or fine art printing. A total of only 3,422 prints have been made. The printer is being sold due to the business owner's retirement. Dsdpfxoznmilo Agfewb Technical data: - Manufacturer: Epson - Model: Stylus Pro 9900 + SpectroProofer (X-Rite) - Print width: 44" (111.8 cm) - Printing technology: Epson MicroPiezo TFP - Ink system: UltraChrome HDR (11 colors) - Maximum resolution: 2880x1440 dpi - Roll and single sheet feeder - LAN network connection (cables for connections available) - Weight: approx. 116 kg Scope of delivery: - Epson Stylus Pro 9900 + SpectroProofer (X-Rite) - Roll holder - Catch tray - Power cable - Available accessories (paper rolls of any quality, canvas rolls) - Partially used ink cartridges (depending on the fill level) - 11 ink cartridges (see photos) in original packaging, unopened Condition: The printer is in good condition and was operated only by professional staff in a canton-wide recognized photo store and regularly serviced, most recently in July 2026 (service record available). The operational condition can be inspected on-site at any time by appointment, and a function test can be performed. Location: Visp, SWITZERLAND Loading: Loading can be assisted upon agreement. Worldwide transport is possible, but must be organized by the buyer. Local pick-up is preferred. Private sale. No guarantee or return. Price: 3,250 Euros

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, operating hours: 15,396 h, pressing force: 173 t, stroke length: 500 mm, overall weight: 16,000 kg, working length: 4,250 mm, Equipment: CE marking, full service history, No minimum price – guaranteed sale to the highest bidder! TRUMPF TruBend 5170 including BendMaster! The machine has been continuously serviced and maintained by Trumpf, with a complete service record. The cylinders are leak-proof and have no oil loss. The tools shown for the robot are included. TECHNICAL DETAILS Stroke: 500 mm Press force: 1,700 kN Working length: 4,250 mm Tool clamping: Hydraulic, top and bottom Number of axes: 6 Load capacity: 60 kg MACHINE DETAILS Voltage: 3 x 400 V Rated current: 41.0 A Frequency: 50 Hz Connected power: 28.0 kVA Control voltage: 24 V DC Follow-up time: max. 90 ms Follow-up distance at 220 mm/s: max. 10 mm Follow-up distance at 160 mm/s: max. 8.5 mm Operating pressure: max. 300 bar Weight: 16,000 kg Operating hours Press beam running time: 15,396 h Hydraulic system running time: 83,212 h Machine operating hours: 152,638 h Dwodpfx Aozzkvcsgfeb EQUIPMENT CE marking Documentation/Manual Rear stop with sensors CNC crowning Bendmaster (robot with 8 m travel) Vacuum manipulators CNC gripping station Double sheet detection BendGuard laser safety device Spare parts: Cable carrier, spare vacuum plate, BWF fixators (machine feet) The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If collection is not completed within the specified timeframe, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data comes from the original offer. No guarantee is given for typographical or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on-site before the end of the auction.

Condition: good (used), Year of construction: 2005, functionality: fully functional, year of last overhaul: 2021, Equipment: documentation/manual, type plate available, Highly precise, mobile coordinate measuring machine (CMM) of the FARO Titanium type, with an arm length of 2.4 meters and 6 axes. The system is in good condition and ready for immediate use. As it is the 6-axis version, the arm is particularly rigid and delivers extremely precise, repeatable measurement results during the tactile probing of components. Perfectly suited for industrial quality assurance, first article inspection, or the comparison of nominal and actual values directly in the workshop. Technical data & highlights: Measuring range: 2.4 meters (perfect for medium to large components and fixtures) Kinematics: 6 axes (maximum rigidity for tactile measurements) Precision: Very high single-point repeatability (typically approx. ±0.025 mm) Environmental protection: 6 internal temperature sensors automatically compensate for fluctuations in the workshop. Software included: Delcam PowerInspect 2015 (with dongle) The package includes the professional measuring software Delcam PowerInspect. Activation is straightforward via the included hardware USB dongle (no subscription, unlimited usage). Fast comparison of nominal and actual values against CAD data. Creation of professional measurement reports for customers. Simple evaluation of form and position tolerances. Dwedpfszx Uwxsx Agfob Scope of delivery: FARO Titanium 2.4m measuring arm (6 axes) Original, robust FARO transport case (heavy-duty) Delcam PowerInspect software incl. USB license dongle Measuring probe / sensors incl. calibration sphere Power supply, cable set Condition & details: Year of manufacture: 2005 Last calibration: 06/2021, certificates available Normal signs of wear and tear Shipping can be arranged for an additional fee. The measuring arm can be inspected and tested by appointment.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Tilting, aluminum floor, manual winch Equipment: - 12 tie-down points - Approach angle 11.5° - Spare wheel Net price: €5,621.85 / Gross price: €6,690.00 Article number: IMO227461900.11 Technical data: • Brand: Vezeko Dsdpfxszy Dfne Agfewb • Model: Imola • Vehicle type: Car transporter • Vehicle condition: New • First registration: without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 462 x 194 x 0 cm • External dimensions (LxWxH): 641 x 200 x 100 cm • Loading height of the floor: 60 cm • Permissible total weight: 2,700 kg • Unladen weight: 685 kg • Payload: 2,015 kg • Chassis: Low loader (wheels under the body) • Tires: 195/55R10C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Freely adjustable bracket for ALKO 901 manual winch • Includes ALKO 901 manual winch with steel cable • Full aluminum floor, with anti-slip coating • 1 adjustable wheel chock • Very stable steel frame welded • Tilting loading platform by means of manual hydraulics + 2 lifting cylinders • Loading platform 394 cm + 68 cm ramp • Side panels color: black • Wheel stop bar / Tie-down points color: red RAL 3020 • Frame completely hot-dip galvanized • Many stable cross members, resulting in high point load capacity • Additional longitudinal struts fully welded • 12 tie-down points inside the loading platform, rubber coated (750kg/each) • Spare wheel mounted under the loading platform • Reverse drive automatic • ALKO inertia coupling and parking brake • ALKO coupling head • Very stable V-drawbar, REINFORCED • 13-pin plug • Reversing lights • Large-sized safety lighting • Swiveling LED rear lights • Integrated rear fog light • Lighting can be swiveled • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop! - Feel free to request any desired modifications! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance, or transport license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - a specialist dealer & repair workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: A25-S5-22-48417, input voltage: 230 V, overall weight: 51 kg, Dear Sir or Madam, We are selling: FARO Quantum S MAX 2.5 m, year of manufacture 2022, fully functional, current calibration available, including CAM2 Probing Edition with an unlimited CAM2 license and USB dongle, complete with all accessories. - Arm reach: 2.5 m - Number of axes: 7 Dwjdpfx Agezxn E Njfsb Sale only to business customers; no warranty. Equipment: - Calibration kit - Transport case - Mounting plate - 3 mm and 6 mm iProbes - USB cable - Power cord 230 V - Rechargeable battery - Mount G3+, magnetic holder 150 mm - Measuring software CAM2 Probing Edition 1, unlimited license for CAM2 - USB dongle, single-user license Please contact us if you have any questions.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Tilting function, perforated sheet metal floor, manual cable winch Equipment: - Tilting loading platform - Perforated sheet metal floor - Approach angle: 11° Net: €5,168.07 / Gross: €6,150.00 Article number: MGK230482000.04 Technical data: • Brand: Martz • Model: GT TILTING 480 • Vehicle type: Car transporter • Vehicle condition: New • First registration: Not yet registered • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 469 x 209 x 0 cm • External dimensions (L x W x H): 689 x 215 x 103 cm • Permissible total weight: 3,000 kg • Tare weight: 793 kg • Payload: 2,207 kg • Chassis: Low loader (wheels under the body) • Tires: 195/55R10C • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Lohr steel lashing points, ideal for secure lashing with VDI 2700 8.1 certification • Centrally located between the lashing points: aluminum tread plate floor, non-slip and waterproof • Includes a continuous loading platform that acts as a wedge at the rear • Hydraulically tilting loading platform (11° approach angle) • Very low chassis for a low approach angle • Very lightweight trailer with a robust design • Additionally, 4 lashing eyes in the side floor • Manual cable winch at the front with a pulley for 3 positions • Braked rubber spring axles from KNOTT • Reverse assist • KNOTT overrun device and parking brake • Very stable, bolted V-drawbar, REINFORCED • 13-pole plug Dsdpezy At Defx Agfswb • Reversing light • Large-sized safety lighting, can be swiveled away • Integrated rear fog lamp • Rear position lights mounted • Foldable license plate holder, can be driven over • Automatic support wheel mounted _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates including customs declaration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale are subject to change -

Condition: as good as new (ex-display), Year of construction: 2024, type of input current: DC, cutting height (max.): 285 mm, cutting range round steel at 45°: 230 mm, cutting range round steel at 90°: 250 mm, saw band length: 2,950 mm, saw band width: 27 mm, Title MEP SHARK 282 CCS [with semi-automatic lowering] Article number SH282CCS Motor power 1.5/1.8 kW Belt opening 285 mm Belt dimensions 2950x27x0.9 mm Weight 440 kg Speed 36/72 m/min. Cutting surface 0° 250 / 220x220 / 280x220 Cutting surface 45° right 230 / 200x200 / 220x200 Cutting surface 45° left 200 / 170x170 / 200x140 Cutting surface 60° right 120 / 80x80 / 140x80 Cutting surface 60° left Description MEP sawing machine: Basic equipment: Dwedezzkthopfx Agfeb Vice with quick adjustment and adjustable guide rails Hydraulic band clamping device with clamping pressure indicator Underframe with removable coolant tray Chip clearing brush Adjusted precision stops for cuts of 0°, 45° and 60° left and 45° right Length stop for cuts of the same length Material support arm, simultaneous connection option for roller conveyor/loading side Turntable for double mitre cuts Machine is designed for pallet truck/forklift transport M2 bi-metal band saw blade for solid and profiled material Tools and operating instructions Electrical equipment: Control panel labeled cable connections Control lamp for operational readiness Main safety switch Emergency stop button Speed changeover switch Thermomagnetic protection Undervoltage release Control handle IP 55 protected Phase comparator Low voltage system 24 Volt Electrical coolant system 48 V (attachment of a micro-spraying device possible) Motor 1.5/1.8 KW 2 speeds 36/72 m/min. Vice opening 285 Saw band 2950 x 27 x 0.9 Weight 440 kg

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Tilting mechanism, aluminum floor, manual winch Features: Dwodpfx Agezy Am Rofeb - 14 tie-down points - Approach angle 11.5° - Spare wheel Net price: €5,873.95 / Gross price: €6,990.00 Article number: IMO227502000.11 Technical data: • Brand: Vezeko • Model: Imola • Vehicle type: Car transporter • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 502 x 209 x 0 cm • External dimensions (LxWxH): 670 x 215 x 100 cm • Loading height of the floor: 60 cm • Permissible total weight: 2,700 kg • Unladen weight: 750 kg • Payload: 1,950 kg • Chassis: Low-loader (wheels under the body) • Tires: 195/55R10C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Freely adjustable bracket for ALKO 901 manual winch • Incl. ALKO 901 manual winch with steel cable • Solid aluminum floor with non-slip coating • 1 adjustable wheel ramp • Very stable welded steel frame • Tilting loading platform by means of manual hydraulics + 2 lifting cylinders • Loading platform 434 cm + 68 cm ramp • Side panels color: black • Wheel stop bar / tie-down points color: red RAL 3020 • Frame completely hot-dip galvanized • Many stable cross members, resulting in high point load capacity • Additional longitudinal struts continuously welded • 14 tie-down points within the loading platform, rubber-coated (750 kg/each) • Spare wheel mounted under the loading platform • Reversing automatic • ALKO overrun device and parking brake • ALKO coupling head • Very stable V-drawbar, REINFORCED • 13-pin plug • Reversing lights • Large-sized safety lighting • Swiveling LED tail lights • Integrated fog light • Lighting swivels • Automatic support wheel in the middle _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any special features! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - a specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: used, functionality: fully functional, Year of construction: 1985, Flatbed trailer CTC SPA RP26S Registered in 1985 3 axles Tires in 40/50% condition Length: 9.68 m, width: 2.5 m, payload: 195 quintals Double hydraulic ramps Dwodpfx Aszzxp Degfob Good condition Available immediately WE WILL CONSIDER TRADING IN VEHICLES OF ALL BRANDS, INCLUDING MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, EQUIPPED WITH CIFA, SERMAC, OR PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, OR KOMATSU.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Tilting, aluminum floor, electric winch Equipment: - Loading angle 11.5° - Spare wheel - 14 lashing eyes Net: €8,025.21 / Gross: €9,550.00 Article number: IMO230502000.21 Technical data: • Brand: Vezeko • Model: Imola • Vehicle type: Car transporter • Vehicle condition: New • Initial registration: without initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (LxWxH): 502 x 209 x 0 cm • External dimensions (LxWxH): 670 x 215 x 100 cm • Loading height of the floor: 60 cm • Permissible total weight: 3,000 kg • Unladen weight: 820 kg • Payload: 2,180 kg • Chassis: Low loader (wheels under the body) • Tires: 195/55R10C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Electric winch • Freely adjustable bracket • Handheld remote control with cable • 12V battery under the loading area in the box • Battery is charged via the 13-pin connector from the towing vehicle, provided the socket is fully occupied. • Solid aluminum floor, with anti-slip coating • 1 adjustable wheel chock • Very stable steel frame, welded • Tilting loading area by means of manual hydraulics + 2 lifting cylinders • Loading area 434 cm + 68 cm approach ramp • Side panels color: black • Wheel stop bar / lashing eyes color: red RAL 3020 • Frame completely hot-dip galvanized • Many stable cross members for high point load • Additional longitudinal struts continuously welded • 14 lashing eyes within the loading area, rubber-coated (750kg/each) • Spare wheel mounted under the loading area • Reversing automatic • ALKO overrun device and parking brake • Coupling head ALKO • Very stable V-drawbar, REINFORCED • 13-pin connector • Reversing lights • Large-dimensioned safety lighting • Swiveling LED taillights • Integrated rear fog light • Lighting swivels • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! Dsdpfx Aszy Dgfegfswb - Feel free to request specific requirements! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates including customs declaration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: used, For sale is a two-stage Leybold vacuum pump unit, consisting of a RUVAC WA 501 roots/rotary piston pump and an SOGEVAC SV 300 B rotary vane pre-pump. The components are mounted together on a base frame with a collection tray. Technical data and specifications: - RUVAC WA 501, catalog number 11730 - Nominal pumping speed RUVAC: 505 m³/h - Maximum pumping speed at 50 Hz: 410 m³/h - RUVAC motor: 2.2 kW, IP55 - SOGEVAC SV 300 B, catalog number 960717 - Year of manufacture SOGEVAC: 2019 - Effective pumping speed SOGEVAC at 50 Hz: 240 m³/h Dwodjzzr Ndjpfx Agfjb - Nominal pumping speed SOGEVAC: 280 m³/h - Motor power SOGEVAC: 5.5 kW - SOGEVAC nameplate weight: 207 kg - Last visible service record: 08/2024 Visible scope of delivery as per the images: - RUVAC WA 501 with motor - SOGEVAC SV 300 B with motor - Direct adapter and connection assembly - Cooling/fan unit - Sensor and connection cables - Base frame with collection tray Used condition with typical signs of use and storage, as well as some minor rust on the frame. The functional condition and achievable vacuum performance have not been re-checked after disassembly; therefore, it is sold as untested. A control cabinet, external cables, or documentation are not shown in the images and are not part of the described scope of delivery. Scope of delivery as per the images. Price net, EXW Kirkel. Loading and organization of transport are possible for an extra charge and by prior agreement. The transport costs depend on the destination and scope. Sale subject to prior sale.

Condition: used, functionality: unexamined, For sale is a Leybold RUTA vacuum pump unit in adapter configuration, consisting of a RUVAC WS 501 rotary lobe pump and a TRIVAC D 65 B rotary vane pre-pump. Technical data and markings: - Configuration: RUVAC WS 501 / TRIVAC D 65 B / Adapter - RUVAC catalog number: 11732 - RUVAC nominal pumping speed: 505 m³/h - TRIVAC D 65 B, catalog number 11296 - TRIVAC serial number: 31000491088 - TRIVAC pumping speed: 65 m³/h - Pumping speed of the pump unit at 0.1 mbar: approx. 380 m³/h - Ultimate partial pressure: < 2 × 10⁻⁵ mbar - Installed motor power: approx. 4.4 kW - Connections: DN 63 ISO-K on the suction side, DN 40 ISO-KF on the discharge side - Druschke article number: SGWS501 - Druschke serial/ID number: 11732-ID15931 - RUVAC marking 2003/08; TRIVAC marking CW 31/2011 Dwsdozzr Nkopfx Agfeb Visible scope of supply according to the images: - RUVAC WS 501 - TRIVAC D 65 B - Direct adapter - Side filter/separator housing - Connection line, cable, and plug - Base frame with drip tray Used condition with dirt, paint damage, and slight corrosion. The operational condition and achievable vacuum performance were not re-tested after disassembly; therefore, it is sold as untested. A control cabinet or frequency inverter is not shown and is not part of the described scope of supply. Scope of supply according to the images. Price net, EXW Kirkel. Loading and organization of transport are possible for an additional charge and by prior agreement. The transport costs depend on the destination and scope. Sale subject to prior sale.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Tilting, aluminum floor, electric winch Equipment: - 14 tie-down points - Spare wheel - Loading angle 13° Net: €8,949.58 / Gross: €10,650.00 Article number: IMO235542000.21 Technical data: • Brand: Vezeko • Model: Imola • Vehicle type: Car transporter • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 542 x 209 x 0 cm • External dimensions (LxWxH): 725 x 215 x 100 cm • Loading height of the floor: 66 cm • Permissible total weight: 3,500 kg • Unladen weight: 950 kg • Payload: 2,550 kg • Chassis: Low loader (wheels under the body) • Tires: 195/50R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • electric winch • freely adjustable mounting bracket • hand-held remote control with cable • 12V battery under the loading platform in the box • Battery is charged via the 13-pin connector from the towing vehicle, provided that the socket is fully occupied. • Full aluminum floor with anti-slip coating • 1 adjustable wheel chock • very stable steel frame welded • tilting loading platform by means of manual hydraulics + 2 lifting cylinders • loading platform 474 cm + 68 cm ramp • Side panels color: black • Wheel stop bar / tie-down points color: red RAL 3020 • Frame completely hot-dip galvanized • many stable cross members for high point load • additional longitudinal struts continuously welded • 14 tie-down points inside the loading platform, rubber-coated (750 kg/piece) • Spare wheel mounted under the loading platform • Reversing automatic • ALKO overrun device and parking brake • Coupling head ALKO • very stable V-drawbar REINFORCED • 13-pin connector • Reversing light Dwodpfxezy Dxuo Agfsb • large-sized safety lighting • swiveling LED rear lights • integrated rear fog light • swiveling lighting • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to ask for specific requests! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export registration plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale are reserved -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Tilting mechanism, aluminum floor, electric winch Equipment: - 14 tie-down points - Loading angle 11.5° - Spare wheel Net price: €8,949.58 / Gross price: €10,650.00 Article number: IMO335542000.21 Technical data: • Brand: Vezeko • Model: Imola • Vehicle type: Car transporter • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 542 x 209 x 0 cm • External dimensions (L x W x H): 725 x 215 x 100 cm • Loading height of the floor: 61 cm • Permissible total weight: 3,500 kg • Unladen weight: 960 kg • Payload: 2,540 kg • Chassis: Low-loader (wheels under the body) • Tires: 195/55R10C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Electric winch • Freely adjustable bracket • Handheld remote control with cable • 12V battery under the loading area in the box • Battery is charged via the 13-pole plug from the towing vehicle, provided the socket is fully occupied. • Full aluminum floor, with anti-slip coating • 1 adjustable wheel chock • Very stable steel frame, welded • Tilting loading area by means of manual hydraulics + 2 lifting cylinders • Loading area 474 cm + 68 cm ramp Dwodpfx Agezy Aftsfob • Side panels color: black • Wheel stop bar / Tie-down points color: red RAL 3020 • Frame completely hot-dip galvanized • Many stable cross members, resulting in high point load capacity • Additional longitudinal struts welded throughout • 14 tie-down points inside the loading area, rubber-coated (750kg/each) • Spare wheel mounted under the loading area • Reversing aid • ALKO overrun device and parking brake • Coupling head ALKO • Very stable V-drawbar, REINFORCED • 13-pole plug • Reversing light • Large-sized safety lighting • Swivel LED tail lights • Integrated rear fog light • Lighting swivels • Automatic support wheel in the middle _____ Accessories can be retrofitted by our specialist workshop! - Feel free to inquire about specific requests! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance, or temporary registration plates (Germany) can be provided. - Export registration plates including customs registration possible Descriptions and images are protected by copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair workshop - for over 30 years. - Errors, omissions and prior sale are reserved.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Tilting, aluminum floor, manual winch Equipment: -Ramp angle 13° -14 tie-down points -Spare wheel Net: €7,546.22 / Gross: €8,980.00 Article number: IMO235542000.11 Technical data: • Brand: Vezeko • Model: Imola • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 542 x 209 x 0 cm • External dimensions (LxWxH): 725 x 215 x 100 cm • Loading height of the floor: 66 cm • Permissible total weight: 3,500 kg • Unladen weight: 890 kg • Payload: 2,610 kg • Chassis: Low loader (wheels under the body) • Tires: 195/50R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Freely adjustable bracket for ALKO 901 manual winch • Incl. ALKO 901 manual winch with steel cable • Full aluminum floor, with anti-slip coating • 1 adjustable wheel ramp • Very stable, welded steel frame • Tilting loading platform by means of manual hydraulics + 2 lifting cylinders • Loading platform 474 cm + 68 cm ramp • Side panels color: black • Wheel stopper bar / tie-down points color: red RAL 3020 • Frame completely hot-dip galvanized • Many stable cross members for high point loads • Additional longitudinal struts fully welded • 14 tie-down points within the loading platform, rubber-coated (750 kg/piece) • Spare wheel mounted under the loading platform • Reversing automatic • ALKO overrun device and parking brake • ALKO coupling head • Very stable V-drawbar, REINFORCED • 13-pole plug • Reversing lights • Large-sized safety lighting • Swiveling LED rear lights • Integrated rear fog light • Lighting swivels • Automatic support wheel in the center _____ Dwodpfx Agoygc Tlsfsb Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any additional features! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: used, Year of construction: 2010, functionality: unexamined, machine/vehicle number: B0.01177.0628, operating pressure: 570 bar, type of input current: three-phase, input voltage: 400 V, temperature: 70 °C, volume flow: 7.44 m³/h, water pressure: 570 bar, pump capacity: 124 l/min, rotational speed (max.): 1,500 rpm, Equipment: type plate available, For sale is a Hammelmann high-pressure pump unit on a base frame, with a 132 kW three-phase motor and a partially transparent protective housing. The exact model designation is not explicitly stated on the existing nameplates; the following data for the offered machine are decisive. Technical data according to the pump and motor nameplates: - Machine number: B0.01177.0628 - Order number: 09.11179.1046 - Year of manufacture: 2010 - Maximum operating pressure: 570 bar - Flow rate: 124 l/min - Piston diameter: 40 mm - Pump drive power: 131 kW - Speed: 1,500 rpm - Maximum fluid temperature: 70 °C - Pressure control valve: 0022 - Oil type: BM 320 - Oil quantity: 12.5 l - Oil pressure: 2.0 bar - Motor: AC Motoren GmbH/Küenle AH 315 MA-4 - Motor power at 50 Hz: 132 kW - Motor voltage at 50 Hz: 380–420 V Δ / 660–720 V Y - Motor protection class: IP55 Visible scope of supply according to the images: - Hammelmann high-pressure pump - 132 kW three-phase motor Dsdpfx Ajzzr Nqogfjwb - Coupling and drive - Pressure control and safety valves - Lubrication/oil unit - Connection lines and cables - Base frame and partially transparent protective housing Used condition with dirt and/or oil stains, paint chipping and surface rust, especially on the motor protection grille. The functional condition has not been re-checked after disassembly; therefore, it is sold as untested. No separate control cabinet, no lance, and no long high-pressure hose are included. Scope of supply according to the images. Price net, EXW Kirkel. Loading and organization of transport are possible for an additional charge and upon prior agreement. The transport costs depend on the destination and scope. Sale subject to prior sale.

Year of construction: 2019, condition: used, For sale is a used cable granulation plant. Technical Data: Model: QJF-600 Voltage: 380V Frequency: 52.37 Hz Total Power: 53 kW Circuit Breaker: 125A Weight: approx. 3200 kg Dimensions: 3.5m x 2.0m x 2.8m Cable Diameter: 0.3–20 mm (dry cables only!) Capacity: 150–200 kg/h (cable/hour) Number of Blades: 10 rotating, 4 stationary Separator: L2.9 x W1.9 x H3.4 m Crusher: L1.97 x W1.4 x H1.95 m Output varies depending on the type of cable processed. This cable granulation plant is suitable for various types of copper cables with diameters up to 20mm. The cable shredder is straightforward to operate and very efficient. Up to 98.7% of the copper can be recovered from the cables. Dodpfxsw Sv Rzs Agfewb The machine price is €25,000 net, excluding shipping and installation. Transportation can be arranged upon request. Once you provide the postal code, we will calculate the delivery costs. Please note that transport costs must be added to the purchase price. Offer valid while stocks last. Subject to prior sale and errors! Installation and delivery available at additional cost!

Condition: used, Year of construction: 2025, functionality: fully functional, type of input current: AC, overall weight: 4 kg, input voltage: 230 V, Equipment: documentation/manual, type plate available, For sale is a ZEISS GOM Scan 1 MV400, a high-precision optical 3D scanner for demanding measurement and inspection tasks. Ideal for precise 3D measurements in industry and research. Fast setup, easy operation. Condition: Like new, little used, primarily used for trade shows, exhibitions, and training. Dwodjzypzuopfx Agfjb Scope of delivery: ZEISS GOM Scan 1 MV400 Original accessories according to standard configuration Power supplies and cables 10 m cable Transport case available Tripod and PC are not included in the offer and will not be provided, but can be offered separately upon request. ZEISS INSPECT OPTICAL 3D Free Open and edit new and existing projects Import of point clouds, polygon meshes Creation, editing, and processing of polygon meshes Element construction: regular geometries, points, sections, curves, surfaces, dimensions CAD import of standard formats IGES, VDA, STEP, JT Open, STL, PLY Application of common alignment methods Comparison against CAD with colored deviation display Dimensional and form/position evaluations according to ISO GPS and ASME Y14.5 Report module Note: The device has only been used for demonstration, training, and presentation purposes. A new 3D acceptance certificate will be provided upon purchase. Furthermore, we would offer to take in used optical GOM or Zeiss systems in part exchange upon purchase of the Zeiss GOM Scan 1 MV400.

Condition: excellent (used), For sale: Professional ABUS electric hoist with a lifting capacity of 3.2 t, including the original ABUS 3.2 t hook block and an automatic Conductix Wampfler cable reel. The set was removed from an operational facility. Complete set for installation on an overhead crane or transport system in a production hall. Hoist Technical Data • Manufacturer: ABUS Kransysteme GmbH • Lifting capacity: 3.2 t (3200 kg) • Model: GM 1032 • Year of production: 1993 • Lifting height: approx. 6 m • Rope diameter: 7.5 mm • Number of falls: 4/1 • Lifting speed: 1 / 5.3 m/min • Power supply: 380–415 V / 50 Hz • Insulation class: F • Protection class: IP54 Hook block • Manufacturer: ABUS • Lifting capacity: 3.2 t • Swivel hook • Designed for use with ABUS hoists Cable reel • Manufacturer: Conductix Wampfler (Delachaux Group) • Max. voltage: 400 V • Protection class: IP55 • Max. current: 22 A Condition • Device dismantled from a working installation • Complete set as shown in the photos Dwjdpfx Ajytymcogfob

Year of construction: 2015, operating hours: 100 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 4S 10kN 2268/000 1215 902, Dyna-Mess TP 10kN HF Cyclic Testing Machine / Endurance Testing System – Top Condition, including Temperature Chamber (up to 120°C) & Software Description: Manufacturer: DYNA-MESS Prüfsysteme GmbH Model: TP 10kN HF (Servopneumatic High-Frequency Cyclic Testing Machine) Maximum Testing Force: 10 kN (Static and dynamic range) Maximum Machine Stroke: 12 mm Date of Purchase: December 2015 Condition: Almost new, very little use, ready for immediate use (Plug & Play) Availability: Immediate For sale is a compact, high-precision cyclic testing machine from the premium manufacturer DYNA-MESS with a nominal load of 10 kN and a stroke of 12 mm. The system was acquired for dynamic endurance tests and service life determinations as part of a research project and has not been used since. It is in excellent, virtually new condition, both visually and technically. The complete package includes a matching temperature chamber with a controller up to 120°C. This enables standard-compliant, dynamic testing of components and materials under realistic thermal ambient conditions. Dwodpfx Agszunz Njfjb System & Scope of Delivery: Load frame Dyna-Mess TP 10kN HF with high-precision force and displacement sensors. Complete PC including installed and calibrated control software DYNA-TCC under Windows 7. The system operates completely independently and is ready for immediate start-up. Temperature chamber with external control unit for tests up to 120°C. All associated documentation and connection cables. The machine is perfect for laboratories, universities or quality assurance departments that are looking for a reliable system for fatigue and endurance testing without incurring the budget of a new device. Inspection of the machine is possible by prior arrangement. As this is a commercial sale, it is offered ex works without any guarantee or warranty. The sale is preferably to buyers who will collect the machine themselves (dismantling and transport must be organized by the buyer). Price: €24,500 (negotiable) plus VAT.