Used Brandt Kdn 330 for sale (91)

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 with gluing unit for hot-melt adhesive granules Glue reservoir located below the glue roller Glue application to the workpiece via glue roller in both co-rotating and counter-rotating modes automatic edge magazine for coil material and fixed lengths Pressure zone with pneumatically-driven main pressure roller and special post-pressure rollers to compact the upper and lower glue joint Centrally adjustable upper pressure Central manual chain conveyor lubrication Control panel at machine infeed End trimming unit (saw aggregates) for front and rear edge overhang with high-precision linear guides 2 motors, each 0.18 kW Swivel range for straight and bevel cutting 0–15 degrees Flush-milling unit, top and bottom, with vertical and horizontal tracing Swivel range 0–15 degrees with 2 milling motors, each with replaceable insert cutter combinations (straight/radius) Digital counters enable rapid and precise, i.e., repeatable, settings Two-point pneumatic adjustment for upper and lower milling motors Scraper unit for finishing processing with horizontal/vertical tracing Support table extendable up to 350 mm Integrated section control for contactless operation of processing functions. Rjdpfx Aaexya Rts Uop Settings via keyboard and LED display Workpiece thickness: 8–50 mm Edge thickness: 0.4–3 mm Feed speed: approx. 9 m/min Connected load: 4.1 kW Compressed air connection: 6 bar Weight: approx. 750 kg Machine length: 3,150 mm Availability: short term Location: Flörsheim

Condition: used, machine/vehicle number: 008371, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Corner Rounding Unit: yes Max feed speed: 16 m/min Rjdjx Swfbspfx Aa Ujp Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, rotational speed (max.): 10,960 rpm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum panel thickness: 50 mm Minimum panel height: 8 mm Maximum panel height: 50 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm Number of positions: 1 Unit 1 Unit: End trimming Number of motors: 2 Automatic engagement by time: yes Motor power: 0.18 kW Speed: 10,800 rpm Redpfx Ajxw Tugsa Ujp Unit 2 Unit: Edge milling Number of motors: 2 Automatic engagement by time: yes Motor power: 0.27 kW Speed: 10,960 rpm Unit 3 Unit: Edge scraper Control system: BFS MACHINE DETAILS Installed total power: 4 kW EQUIPMENT Upper pressure Pressure by spring-loaded rollers Panel support guide Magazine for the coil EVA glue system Hot-melt glue pot Edge pressure roller track Number of pressure rollers: 3 CE marking

Condition: like new (used), Year of construction: 2010, machine/vehicle number: 0-261-20-4583, Edge banding machine BRANDT , Type O KDN 200 Ambition 1200, used, Year of manufacture 2010 Air pressure 6 bar The power supply voltage 400V – 3 ph - 50 Hz Total power 4 kW Work piece thickness from 0, 3, 4 to -8,50 mm Extraction diameter 3 x 60 working height 950 mm Feed speed/ Sealing side speed: 10m/min Coil cut off max: 0,4 mm -3,0x45 mm Rodoh Ak D Uspfx Aa Uep noise emission db(A) 84 to 87 Transport/overall dimensions L3.450xW1300xH2180mm Net weight 1200 kg Gluing, End cutting, Top & Bottom trimming, Scraping Price Euro 4900 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Edge banding machine KTD51 for shaped profiles and straight edges, with direct glue application. Minimum workpiece length: 160 mm, workpiece thickness: 10 – 40 mm, edge thickness: 0.5 – 1 mm, inner radius approx. 25 mm. Year of manufacture: 1993, feed speed adjustable from 4 to 9 m/min, 2.6 kW, 400 Volt. Redpfx Aaevf H I Ts Uep

Condition: good (used), Year of construction: 2004, Machine equipped with groove milling cutter, cross-cutting unit, 2 saws, milling station, corner copying, radii with surface pull blade. Total connected load 10 kW, 6 bar compressed air connection. Air consumption per cycle: 43 l/min. Dimensions: 4740 x 1635 x 1706 mm. Body size: 3100 x 1040 x 1706 mm. Edge thickness: 40 – 8 mm. Good condition. Transport possible at extra cost! Rsdoyl Uurjpfx Aa Uep

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Redpfsvvkd Tsx Aa Uep Storage location: Nattheim

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Storage location: Nattheim Rjdpfx Aaovvkfwo Uop

Condition: ready for operation (used), Year of construction: 2016, workpiece width (max.): 40 mm, total height: 950 mm, product length (max.): 3,672 mm, This BRANDT Kantenanleimmaschine Ambition 1110 KDF 110 was manufactured in 2016. It is a single-sided edge banding machine designed for processing straight workpiece edges. With a total length of 3672 mm and a feed speed of 8 m/min, it accommodates workpiece thicknesses from 8 to 40 mm. Consider the opportunity to buy this BRANDT Kantenanleimmaschine Ambition 1110 KDF 110 edgebander. Contact us for further details. • Machine type: Single-sided edge banding machine for straight workpiece edges • Feed speed: 8 m/min • Working height: 950 mm • Workpiece and edge parameters • Workpiece thickness: 8–40 mm • Workpiece width: min 70 mm (thickness 8–22 mm) or 120 mm (thickness 23–40 mm) • Edge material (rolls): 0.4–3 mm • Edge material (strips): 0.4–3 mm • Max. edge height: workpiece height + 5 mm • Processing units (aggregates) • Joint trimming unit: 2 x 0.75 kW, 200 Hz motors (one climb-milling, one counter-milling) with diamond cutters • Gluing unit (A3): Quick-change application unit; electronic thermostat for temperature monitoring • End trimming unit: 2 x 0.18 kW, 200 Hz motors for front/rear edge overhang trimming • Flush/radius trimming unit: 2 x 0.27 kW motors, manually adjustable between flush, radius, and chamfer • Profile scraper: For rounding or chamfering pre-milled PVC edges (max 3 mm) • Glue joint scraper: Removes adhesive residue in glue joint area • Control and electrical • Control unit: EASY CONTROL EC 10+ with 7" widescreen touchscreen • Program memory: Up to 20 processing programs • Supply voltage: 400 V / 3 Ph / 50 Hz Rsdpfxoyir S Ns Aa Uop • Full load current: 15.0 A • Pneumatics: Min. 6 bar • Operation and maintenance • Adjustments: Manual adjustment of units (pressure beam, trimming, pressure zone) with digital mechanical counters • Lubrication: Manual central lubrication for the transport chain (standard) • Safety: CE-conform; dust-tested (TRK max. 2 mg/m³) Technical Specification Feed Speed 8 m/min

Condition: excellent (used), Year of construction: 1998, For sale is this beautiful Brandt edge banding machine. It can be inspected and tested on site. About the machine: - End trimming unit - Edge preheating - Flush trimming saw unit Rsdpfx Aaoykinds Ujp - Profile milling unit top/bottom - Scraper top/bottom - Buffing unit

Condition: repair required (used), Year of construction: 1996, Edge banding machine Brandt Optimat KD 69 0 In need of repair, the control system no longer functions properly Without premilling Edge trimming front/rear Corner rounding top/bottom Corner rounding front/rear Rodjylttgjpfx Aa Uep Scraper top/bottom Polishing top/bottom

Condition: good (used), Year of construction: 2005, functionality: fully functional, Single-sided edge banding machine with jointing cutters and coping unit, designed for processing EVA hot-melt adhesives Technical data: Edge thickness: 0.4 - 12 mm Workpiece thickness: 8 - 60 mm Coil separation: 3 x 45 mm or 0.8 x 65 mm Machine length: approx. 6,860 mm Top pressure manually height-adjustable Equipment: Manually adjustable infeed fence Jointing unit with 2 motors, 2.2 kW (each) both motors pneumatically controlled Hot-melt adhesive application Pressure zone with 1 primary pressure roller and 3 subsequent pressure rollers End trimming unit with 2 motors, each 0.35 kW automatically adjustable via program from chamfered to straight trim cuts Edge trimming unit with 2 motors, each 0.55 kW, for flush trimming, chamfer trimming, or radius trimming with 4-position fixed-point adjustment for side tracing Grooving unit with horizontal shaft, e.g., for back panel grooves Redpeygg Nkofx Aa Usp Copy milling unit with 2 motors, each 0.35 kW Pneumatic infeed and outfeed control Profile scraping unit with pneumatic infeed/outfeed control Flat scraper unit Buffing unit Additional equipment: * Release agent application at infeed Control system PC 16 with color graphic user interface Attached return system LIGMATECH BOOMERANG ZHR 11 Return system currently not operational, in need of repair

Condition: good (used), Code: 0134 Brand: BRANDT - GERMANY Model: KTD 53 Automatic edge bander for wood, pvc, veneer, furniture, custom furniture, joinery and various Technical data: Min/max panel height mm 10/40 Edge thickness min/max 0,4 - 1,5 mm Feed speed 7 mt/min on motorized roller conveyor Min panel width mm 65 Composition: Gluing unit Cutting shear unit End cutting unit Redpswq Sc Sjfx Aa Ujp Upper/lower trimming unit Wheels on base for easy handling Volt 380/50 Total power Kw 4,5 Compressed air 6 bar Overall dimensions mm 1800 x 615 x 1170 h Weight kg 280

Condition: used, Edge banding machine Brand: Brandt Model: Profiline KDF 670-C Hiflex Single-sided edge banding machine in right-hand design, for hot melt gluing. Quick-change gluing unit for hot melt glue. Processing with PU glue granulate possible in accordance with glue specifications. Leak-proof glue reservoir under the glue roller. Precise glue application to the workpiece with glue roller, no adjustment of workpiece thickness necessary. Glue roller with selectable rotation direction for counter or forward feed. Glue temperature monitoring via electronic thermostat. Rodpfx Aaoynhwfo Uep Automatic reduction of glue temperature during work breaks. Infrared heating for hot melt reactivation. Automatic edge banding magazine for roll material and fixed lengths, including roll plate with a diameter of 800 mm and reinforced cutting shears for thick PVC/ABS, max. 3 x 45 mm. Standard equipment with edge banding and workpiece – distance monitoring with optical display. Stable pressure zone with driven, compressed air-loaded main pressure roller and 3 free-running post-press rollers. Standard equipment with automatic central lubrication for the transport chain. Motor-driven adjustment of overpressure. Control panel at the machine infeed. Technical data Edge strip thickness: 0.4 – 12 mm Cutting tool: max. 3.0 x 45 mm or 0.8 x 65 mm Workpiece thickness: 8 – 60 mm Feed speed: 11 – 16 m/min (see below) When selecting edge banding thicker than 3 mm, the feed speed is automatically switched to 14 m/min. automatically to 14 m/min. When selecting form cutters, the feed rate is automatically switched to 11 m/min. Electrical connection: 400 V, 3-phase, 50 Hz Compressed air connection: 6 bar Connected load approx. 17 kW Machine length: 6,860 mm Full information about the machine can be found on our webpage burbagemaskin.se

Condition: used, machine/vehicle number: 008160, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 14 m/min Rsdpfxoxqm Iyj Aa Ujp Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 006603, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 14 m/min Rodpeyngz Aefx Aa Uop Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 006719, Type of edging: Thin edge, Thick edge, Veneer Gluing System: EVA Hotmelt Premilling Unit: yes Redoq Awliepfx Aa Usp Corner Rounding Unit: yes Max feed speed: 11 m/min

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, edge thickness (max.): 8 mm, Easy Controller EC10+ Edge Thickness: 0.4-8mm Workpiece Thickness: 8-60mm Total Machine Length: 4780mm Rsdpfowixkyex Aa Uop Infeed Fence Adjustable Joint Trimming Unit with 42mm cutter heads End Trim Chamfer / Straight with pneumatic adjustment Trimming Unit Contour Trimming Unit Scraping Unit with pneumatic adjustment Buffing Unit

Condition: good (used), Gluing unit, gluing section, gluing head, heating basin for edgebanders, edgebanding machine -Manufacturer: Brandt, components from the BRANDT KM 36 edgebanding machine Rsdjgylrdopfx Aa Ujp -Individual components: see photos -Price/Sale: complete -Overall dimensions: 1200/800/H530 mm -Total weight: 122 kg

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, cutting units from edgebanding machine BRANDT KM 36 Rodpfx Aegy Da Sea Uop -Engines: Homag type LF-40-L / Perske KNS 22.08-2 -Power: 0.27 kW / 12000 rpm / 10800 rpm -Voltage: 220 V / 200 Hz -Pneumatic components: Bosch -Individual components: see photos -Price/Sale: complete -Overall dimensions: 500/560/H670 mm -Weight: 51 kg

Condition: good (used), Finishing unit, buffing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, after the scraper for edge processing machine -Finish unit: from BRANDT KM 35 edgebanding machine -Motor: ATB 0.25 kW -Speed: 2820 rpm - laterally adjustable Rodpfx Ajgy T I Eea Uop -Height: adjustable -Dimensions: 480/250/H490 mm -Weight: 29 kg

Condition: used, Edge banding machine, edge banding machine, edge banding machine, finishing unit, buffing unit, modular assembly kit, format processing unit, double-end profiler, edge processing machine, sanding unit, edge banding unit -Unit: from edge banding machine BRANDT KM 35 -Motor: Groschopp type PM1 72-35 - Mot 180 V / 54 W. Redpfxjgy T Nxo Aa Ujp -Individual components: see photos -Dimensions: 425/270 / H260 mm -Weight: 24 kg

Condition: good (used), Gear, angular gear, Stinrad gear, transmission gear, worm gear, angular gear for edge banding -Manufacturer: ZAE, angular gear with cardan joint from the BRANDT KS 25 edge banding machine -Type: W 88 -Translation: i = 2: 1 -Dimensions: 260/100 / H210 mm -Weight: 7.2 kg Rodpfx Aaogylrao Uop

Condition: good (used), Finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -Manufacturer: Homag, profile scraper from edge banding machine BRANDT KM 36 / KM35 -Quantity: 1 piece available -Dimensions: 510/430/H570 mm Rjdpogylq Sjfx Aa Usp -Weight: 62 kg

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, milling unit from edge banding machine BRANDT KM 36 / KM 35 -Motor: 2x Homag type LF-55L 0.55 kW / 12000 rpm -Voltage: 220V / 200 Hz -Number: 2x milling unit available Rjdpfjgy Dbhex Aa Usp -Price per piece -Dimensions: 500/350 / H570 mm -Weight: 55 kg