Used Bundle Turner for sale (538)

Condition: used, Year of construction: 2008, machine/vehicle number: FA55, Machine Overview The ATLANTA COMBIGIOTTO 90-M is an automatic inline packer designed to collate containers and package them on a corrugated tray with film overwrap. The machine is configured for Wrap + Film on tray and operates with a straight product infeed. It is suitable for a wide container range, from 0.5 L up to 10 L, typically covering PET, glass or HDPE bottles, cans, and similar rigid containers. The unit was manufactured in 2008 and underwent a general overhaul in 2022. It is described as ready for operation. Operating mode: Automatic Infeed layout: Straight infeed (inline) Packaging: Tray wrap with neutral film overwrap Format range: 0.5 L – 10 L Machine configuration: Delivered without container infeed system (to be provided by the line) Year of manufacture: 2008; Overhauled: 2022 Typical process sequence: product collation in line; tray blank pick-up and forming/wrapping around the collation; application of neutral film and sealing; discharge to downstream handling. The configuration offers robust stabilization on tray with a protective film wrap, suitable for distribution and palletizing. Key Technical Data Model: COMBIGIOTTO 90-M Brand: ATLANTA Operating condition: Ready for operation Package configuration: Wrap + film on tray Film type: Neutral Tray: Available (tray packaging configuration) Machine feed type: Straight (inline) Format capability: 0.5 L to 10 L containers Year: 2008 (overhauled 2022) Automation & Control Rsdpjxdnbzofx Acvobw Industrial PLC-based control with HMI for recipe handling and setpoint management (format parameters stored for repeatability). Speed control via frequency inverters/servo drives to synchronize infeed, collation, tray wrap and film application. Integrated diagnostics, alarm history and counters (shift/lot totals). Typical sensors: product presence, jam detection, film end-of-roll, tray blank level, safety interlock status. Electrical protection degree: IP54 for the electrical system and motors. Line Integration Container infeed: not supplied with this machine. The packer expects a stable, synchronized upstream supply (accumulation/spacing/dividing to be provided by the line integrator). Inline design simplifies alignment with fillers, labellers and downstream conveying. Standard interface signals (typical): machine ready, run permission, emergency stop loop, fault, upstream/downstream handshake. Detailed I/O list can be aligned during integration. Outfeed prepared for connection to downstream handling such as conveyors, inspection, or palletizing (to be defined during project engineering). Condition & Maintenance Overall status: Ready for operation. Overhaul completed in 2022 to restore full functionality. Preventive maintenance recommended: periodic inspection of film path and sealing elements, collation guides, tray magazine mechanisms, and conveyor chains/belts. Documentation and spare parts recommendations can be provided during commissioning and FAT/SAT planning. Performance & Versatility Wide format range from 0.5 L to 10 L enables use across beverage, edible oil, household/industrial liquids and similar appl...

Condition: used, Year of construction: 2008, machine/vehicle number: FA56, Machine Overview Automatic tray plus film packer ATLANTA COMBIGIOTTO 90-M designed for secondary packaging of bottles with 90° side infeed. The machine forms a corrugated tray and wraps the product with neutral shrink film, then conveys it through a shrink tunnel to obtain stable, retail-ready bundles. Ideal for beverage lines handling PET, glass or HDPE bottles. Reference No. FA56. Year 2008, overhauled in 2022. Condition: Ready for operation. Indicative output up to 25 packs/min, depending on product and format. Operating concept: automatic grouping of bottles, tray forming/loading, film wrapping and shrink-tunnel consolidation. Packaging configuration: Tray + neutral film (shrink). 90° infeed enables compact layouts and easy connection to existing conveyors. Key Technical Data Make / Model: ATLANTA COMBIGIOTTO 90-M Operating type: Automatic Rbjdpfxex H Thzs Acvsw Infeed orientation: 90° side infeed Packaging: Tray + film (neutral) Tray magazine/formation: Available Nominal capacity: up to 25 bundles/min (format and product dependent) Year: 2008 (overhauled 2022) Condition: Ready for operation PLC: SIEMENS S7 E 300 Automation & Control Industrial PLC-based control with operator HMI for recipe selection, speed setpoints and diagnostics. Inverter-controlled drives for smooth acceleration and product handling. Photoelectric sensors for product presence, jam and film detection. Temperature-controlled shrink tunnel for consistent film performance. Interlocked access doors with safety monitoring for guarded zones. Line Integration Upstream: accepts bottles from conveyor with 90° transfer to the infeed section; integrated selection/divider to create pack patterns before tray loading. Downstream: discharge conveyor after shrink tunnel for connection to inspection, case handling or palletizing. Signals and handshakes typically include start/stop, fault, emergency stop circuit integration and speed reference. Mechanical interface and layout drawings available on request for line engineering. Condition & Maintenance General overhaul performed in 2022. Machine presented as ready for operation. Preventive maintenance recommended: periodic checks of film path, knife/sealing components, tray magazine/erector, lubrications and conveyor wear parts. Performance & Versatility Suitable for a wide range of cylindrical or square bottles commonly used in beverages. Typical pack patterns achievable for bottles (e.g., 2×2, 3×2, 4×3, etc.) depending on container size and tray dimensions. Neutral shrink film for clear presentation; tray provides rigidity and stacking strength. Consistent bundle quality via controlled film wrapping and thermal shrink process. Site Requirements Electrical supply: 400 V ±5%, 50 Hz ±1%, 3P + N + PE (separate neutral and earth). Auxiliaries: 24 V DC. Instrumentation voltages: 24 V AC – 230 V AC. Electrical enclosure protection: IP54; motor protection: IP54. Ambient conditions: temperature +5 °C to +40 °C; relative humidity 30%–80% non-condensing; altitude up to 1000 m a.s.l.; no harmful gases or explo...

Condition: excellent (used), Catalogue No.: 7858 ADVANTAGES – Polish production – for cross-cutting packages or round timber – unpainted – mobile, on wheels – used saw, in very good condition TECHNICAL DATA guide bar length: 2100 mm cutting length: 1900 mm automatic lubrication of the cutting system Rjdpfx Aoytd Nhecvebw damping and tension system in the head manual guide bar feed electric motor: 7.5 kW transport dimensions (L/W/H): 1900x900x2710 mm total weight: 205 kg Net price: 28,900 PLN Net price: 6,880 EUR (based on exchange rate 4.2 EUR) (Prices may change in the event of significant fluctuations)

Condition: ready for operation (used), Year of construction: 2017, operating hours: 51 h, functionality: fully functional, machine/vehicle number: 641426, load capacity: 1,500 kg, We can offer you a KAUP pallet inverter, pallet turner Pallet Inverter: KAUP (made in Germany) Model: Inverter Type: 1.6T451W/0099 Machine number: 641426 Platform dimensions: 1470 x 1200 mm Maximum platform opening: 2275 mm Minimum platform opening: 280 mm Maximum stack weight: 1500 kg Motor power: 4 KW Connection: 380 volts Net weight: 2125 kg Year of manufacture: 04 / 2017 Rbsdpfjykh Trox Acvsw Machine dimensions (W x D x H): 3900 x 3950 x 3200 mm Transport dimensions (W x D x H): 3900 x 2300 x 2535 mm Price for the KAUP pallet inverter upon request via email This offer is valid while the machine is unsold Delivery conditions: Delivery time: from stock, subject to prior sale Delivery: ex works Baarle-Nassau Payment: prior to collection Prices: quoted net, excluding VAT Machinehandel De Leeuw BV is one of the few companies in Europe specializing in the trade and stock of predominantly used Kardex Remstar automated lift & carousel storage systems. We assemble and/or dismantle these systems safely using VCA-certified technicians, a service we have provided for over 33 years. Machinehandel De Leeuw BV Oordeelsestraat 7–B 5111 PA Baarle-Nassau The Netherlands

Condition: good (used), Toppy Maxi PH Advance Mobile Pallet Turner This machine is like new, fully functional, and ready to work. Year of manufacture: 2013. Technical specifications: Format: 800 x 1200 mm Stack height: 1800 mm Load capacity: 1500 kg Device weight: 1400 kg Includes a built-in battery charger. Redpfx Acoywdtievobw Control panel, fast operation, hydraulic drive. Quiet operation. Compact design, space-saving. Made in Italy.

Condition: like new (used), Year of construction: 2018, Barrel turner Fabr.BAUER Bj.2018 Like new Not used. Redpfxjtymumo Acvsbw 1.FWZ 60 Price : 250,-€ 1.FWZ 200 Price : 520,-€

Condition: good (used), Pile Turner Toppy Twister 1000 AJ Silver h=2000 Fully operational, ready to work. Perfect condition. Year of manufacture: 2016. Made in Italy. This machine has an increased stack height of up to 200 cm. Equipment: Aeration, shaking, side margin. Technical specifications: Format: 1200×800 mm Stack height: 2000 mm Load capacity: 1200 kg Device weight: 1300 kg Power consumption: 9 kW Control panel, fast operation, hydraulic drive. Redoyur Iujpfx Acvebw Quiet operation. Compact design, takes up little space. Includes a ramp.

Condition: good (used), MV Technik MPR 10 Mobile Pile Turner Fully operational, ready to use. Very good condition. Made in the Czech Republic. Rbsdpoyur Dvofx Acvjw Technical specifications: Maximum format: 1600×1200 mm Load capacity: 1000 kg Maximum stack height: 1560 mm Device weight: 1640 kg Manufactured in 2016. Includes battery charger and pre-assembled lithium-ion battery. Control panel, fast operation, hydraulic drive. Quiet operation. Compact design, space-saving.

Condition: new, Year of construction: 2026, functionality: fully functional, pallet changer: manual, Samzon MPT2000-15 Pallet Turner is equipped with the latest electronic and mechanical components. The traction group has a 2000w electrical engine. The oleo-dynamic group has a 3000w engine with an incorporated pump to obtain elevate operative times. Besides the forks are controlled by an electro-valve allowing the operator to handle their movements through simple switches over the control board. The gripper unit is made of a solid loom over there are rested on aluminum controls of polyzene runners with a high resistance and long duration. Beside the gripper is also equipped with a support surface for the paper, aligned and precise. The paper or any kind of palletizable material can also be lifted and turned over without pressure between the forks, leaving it up to the operator the choice regarding how to work. *Servo-steering – Easy movement of steering wheel. *Hydraulic locking-pawl for very easy handling of rotation. Rbedow U R D Ijpfx Acvjw

Year of construction: 2026, condition: new, functionality: fully functional, pallet changer: semi-automatic, Samzon Pile-turner 104LVA pile-turner is a stationary machine used for changing the pallet under a product. This model is often used in the paper-industry. Rodpfx Acew U R Tcovsbw A major advantage with this machine is that the platforms can close-down to 320mm, which means the Samzon Pile-turner can handle very low products. Samzon Pile-turner closes around the product with platforms, tilts back by 90 degrees, the tower is released and is rotated manually 180 degrees and once again locked. The bottom platform is then lowered back down, the platforms open, and the products has been placed on a new pallet. The pallet is fed into the machine using a pallet truck or pallet jack. The pallet turner can be delivered with a variety of extra equipment and surface treatments. Samzon 104LVA PileTurner are fully equipped with vibration and vibration.

Condition: new, Year of construction: 2026, functionality: fully functional, pallet changer: manual, Samzon MPT1700-10 Pallet Turner is equipped with the latest electronic and mechanical components. The traction group has a 2000w electrical engine. The oleo-dynamic group has a 3000w engine with an incorporated pump to obtain elevate operative times. Besides the forks are controlled by an electro-valve allowing the operator to handle their movements through simple switches over the control board. The gripper unit is made of a solid loom over there are rested on aluminum controls of polyzene runners with a high resistance and long duration. Beside the gripper is also equipped with a support surface for the paper, aligned and precise. The paper or any kind of palletizable material can also be lifted and turned over without pressure between the forks, leaving it up to the operator the choice regarding how to work. *Servo-steering – Easy movement of steering wheel. Rbedpfxjx Ebn Ro Acvew *Hydraulic locking-pawl for very easy handling of rotation.

Year of construction: 2026, condition: new, functionality: fully functional, Samzon Pile Turner PT1800-20 is a stationary stack-turning machine used to rotate pallets, erect products, change pallets or damaged pallet layers. This machine can be used for very long pallets – up to 3500 mm – and the platforms can move down to a minimum of only 400 mm. The pallet is fed into the machine using a pallet lifter or pallet truck. The machine can either rotate the product 180 degrees or up to horizontal level, depending on the need. The platforms are pressed together against the pallet and stopped by a pressure switch, which can be easily adjusted. Rodpfx Aew U Rr Sjcvebw When changing pallets, either due to a defective pallet or to change to a plastic pallet, the new pallet is placed on top of the product. The platforms press down on the product, rotate 180 degrees, and the product is now on its new pallet. Pile-Turner is operated simply and easily by pressing a button on the control panel. Max opening 1800mm / minimum 400mm Max weight up to 2000kg (option 4000kg) Manual or semi-automatic operation Customer-tailored solutions.

Condition: used, functionality: fully functional, machine/vehicle number: 2014, operating hours: 1,640 h, MAKE: MENART MODEL: 1032 MTRA YEAR: 2014 HOURS: 161750 EXTRAS: Diesel 326 HP SERIAL NO.: REGISTRATION NO.: 26-01.75-1 Rjdpeyubk Sjfx Acvebw

Condition: new, functionality: fully functional, New machine - stock clearance sale - Tipping is mechanical. The stated price is net ex warehouse location. Rbsdew Sfdwopfx Acvjw

Condition: used, SPRINGER revolver log turner Rbsdpjyvhilefx Acvow

Condition: excellent (used), CATALOG NUMBER 7678 TECHNICAL DATA - Guide bar length: 1670 mm - Cutting length: 1500 mm - Automatic lubrication of the cutting system - Damping and tensioning system in the head - Manual feed of the guide bar - Electric motor: 7.5 kW - Transport dimensions (L/W/H): 1650x900x2350 mm - Total weight: 240 kg ADVANTAGES – Austrian manufacturing – Suitable for cross-cutting packs or round timber – Unpainted – Mobile, on wheels – Used saw, very good condition Rbjdpfxjymd N Io Acvew Net price: 25,900 PLN Net price: 6,160 EUR depending on an exchange rate of 4.2 EUR (Prices may change with greater fluctuations)

Year of construction: 1997, condition: not inspected (used), Cluster packer / foilwrapper make: Novopack type: CD1 110+SL070 Dimensions 3600x2000x2150mm sealbar first operation 1050mm side sealbar 650mm Infeed conveyor Flexlink Rbsdpfx Acsia I Ifovjw 10Kw as-is or adjusted to customer needs

Condition: used, Year of construction: 1998, machine/vehicle number: 7356, Stapelwender / Pile Turner Baumann BSW 2-500Year 1998 - Serial-No. 7356 Bogenformat / Sheet Size max. 550 x 750mm Rbedpfx Aerw Dk Secvsw Stapelgewicht / loading capacity max. 500kgs Innenmaß Plattform / Interior platform size 620 x 940mm Öffnungsweite Plattform / Opening of platforms min. 460mm - max. 1220mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1988, machine/vehicle number: 14068, Stapelwender / Pile Turner DOX 3000 MYear 1988 - Serial-No. 7356 Format / Size max. 720 x 1020mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Rodpfx Aceh Axkvevebw Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Bündelpresse / Bundle Press SPLEK SL 82B-300 Baujahr / Year 1996 - Serial-No. 1589 Pressplattengrösse  / Press Plate Size max. 220mm (high) x 330mm (width) Einsatzlänge / Insert length 770mm Stapel Presskraft maximal 20KN Redpsw Nhc Rsfx Acvebw Geeignet zum Pressen und Bündeln von gefalzten Bogen, Broschüren, Buchblocks sowie Kartonagen. For Pressing and Bundling of Folded Sheets, Brochures, Book bBlocks and cardboards. Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Bündelpresse / Bundle Press BMF SK 82 B Baujahr / Year 1968 - Serial-No. 0210 Pressplattengrösse  / Press Plate Size max. 220mm (high) x 330mm (width) Einsatzlänge / Insert length 770mm Stapel Presskraft maximal 20KN Geeignet zum Pressen und Bündeln von gefalzten Bogen, Broschüren, Buchblocks sowie Kartonagen. For Pressing and Bundling of Folded Sheets, Brochures, Book bBlocks and cardboards. Rjdpfsxp H Tysx Acvjbw Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), functionality: fully functional, cutting length (max.): 3,550 mm, cutting width (max.): 530 mm, overall weight: 9,000 kg, stroke length: 100 mm, TECHNICAL DETAILS Usable cutting length (as double guillotine): 3,200 mm Usable cutting length (as single plate shear): 3,550 mm Press stroke: 100 mm Press width: 550 mm Min. cutting width: 18 mm Max. cutting width: 530 mm Scrap setting range: 0/50 mm Operating pressure: 6/7 bar MACHINE DETAILS Installed total power: 13.9 kW Dimensions & Weight Dimensions (L x W x H): 5,200 x 1,700 x 1,800 mm Weight: 9,000 kg EQUIPMENT Robust steel construction Blade beam made of cast iron Rodpfxoyf Euco Acvobw Self-lubricating prismatic guides Adjustable rear support Press for holding the veneer package during cutting Photoelectric cells Electronic programming device Perimeter safety guards

Condition: ready for operation (used), Year of construction: 2006, A blank turner for sheet metal blanks is available. Max. Blank dimensions X/Y: 1600mm/1100mm, max. blank stack height: 190mm, max. stack weight: 1500kg, max. stack inclination: 15°, cycle time with pallets: approx. 30s, machine dimensions X/Y/Z: approx. 3500mm/2500mm/2500mm, weight: approx. 3000kg. Documentation available. On-site inspection is possible. Rbsdpfov I Dcgex Acvew

Year of construction: 2000, condition: good (used), machine/vehicle number: Nbg, Only brackets available !!! 1x steel chain hoist with 2 load strands each 125KG with a Müller Martini pneumatic stacking tongs - gripper - lifter bundle Camp type 0277.0401 including chassis for mounting on Stahl KT2000, ABUS HB, or Demag KBK For paper, pallets, cardboard boxes etc. Chain hoist with 2 lifting speeds (fine lift), lifting height/chain length approx. 4m Rbodpfx Ajhy Eqhjcvjw Weight complete approx. 150 kg Connection to 400V 50Hz Good condition, fully functional Different years of construction, about 20 pieces available! Item location is 75053 Gondelsheim See pictures Shipping by forwarding agent or pick-up

Condition: good (used), Toppy Octabin Mobile Pile Turner This machine is like new, fully functional, and ready to use. Manufactured in 2011. This machine is designed for turning pallets, boxes, big bags, etc. It is also ideal for emptying containers, transferring goods, etc. Rsdpfsyl Rxmex Acvjbw Technical specifications: Maximum pallet size: 1000 x 1200 mm High stack height Load capacity: 400 kg Device weight: 950 kg Battery charger included. Controlled from a control panel, fast operation, hydraulic drive. Independent control of each fork, smooth rotation adjustment. The machine can also be used as a pallet loading trolley. Quiet operation. Compact design, space-saving.