Used Bender Machine for sale (91,372)

Condition: used, Punching Machine MUHR & BENDER - MUBEA Model KL 350 / 203 Machine No. KL3509864 Year of manufacture: 1998 Punching force: 35 tons Throat depth: 200 mm Ram stroke: 22 mm Capacity: Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate: 265 x 70 mm Ram plate thickness: 25 mm outside / 50 mm in the center Table plate: 285 x 250 mm, thickness 40 mm Hodpfoxf Utaex Aaconu Table cutout: 115 x 85 mm Drop-through opening in table cutout: 115 x 25 mm Installation height: 125 mm (with table and ram plate) Number of strokes: single stroke via foot switch Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Electric foot switch for stroke activation - Manual lever search device for punch movement - Special tool as punching tool Space required (L x W x H): 800 x 800 x 400 mm Weight without tool: 340 kg Weight with tool: 370 kg Good condition

Condition: used, Year of construction: 1999, connected load frequency 220 V rated current 263/152 Hsdpfx Ajvvx E Ssacenu weight of the machine ca. 1 t

Condition: refurbished (used), functionality: fully functional, Year of construction: 2004, punching force: 50 t, punching diameter: 100 mm, stroke length: 60 mm, product height (max.): 15 mm, Mubea / Muhr and Bender KLH 500 / 610: - hydraulic hole punch - Punching force 50 to - stroke 60 mm - punches up to Ø 30 mm in 15 mm, Ø 50 mm in 9 mm, Ø 100 in 4.5 mm - throat depth 610 mm - with support table Hedpfx Aovdidueaconu Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible.

Condition: reconditioned (used), Year of construction: 1994, Min.-max. wire dia. 6 to 14mm (.236″ to .551″) Flying shear (5) indexing rotary arbors (4) pre-feed rolls Hnsdpsfkmr Ssfx Aacju 80 to 120 mts/min Max. cutoff lgth: 15 meter track Indexing wire/rod collector 30kW (40HP) AC motor Hydraulick motor: 15 kW (20HP) Operators control panel; 380V- 50 cycle – 3ph PLC Control SIMENES S 5 3 vertical payoff units Completely refurbished machine

Condition: used, Year of construction: 1993, Technical details: workpiece thickness - max.: 80 mm workpiece thickness min.: 5 mm plate size without being adjusted: 2000x1000 mm size of plate min.: 100x100 mm longitudinal travel: 2800 mm cross travel: 1000 mm control: CNC Mubea Matic100 hole diameter: min/max:10/40 mm tool taper: Kegel/cone/cono DIN 6327 bore spindle stroke: max. 150 mm positioning accuracy: +/- 0,5 mm spindle speeds:: 112-180-224-280-355-560 U/min traversing speed: 80 m/min feed length: max. 150 mm rapid traverse: 8 m/min work table:: L:2500;B:950 mm workpiece weight: 750 kg deburring device max.: d=40 mm work height max.: 1050 mm arm gripping device: 4 Stück/ pcs opening of gripping pliers min/max.: Typ I: 5/45 mm opening of gripping pliers min/max.: Typ II: 45/85 mm air-pressure connection: 6 bar total power requirement: 30 kw Weight approx.: 5,5 t space requirements approx. LxWxH: 5,0 x 5,5 x 2,7 (je nach Aufstellung) m - plate size with beeing adjusted also 1000x4000 mm possible - with roller conveyor 2x1000mm - material supporting table complete with supporting elements, guidance rail for guidance and transportation of the positioning wagons , cooling of the drill via air pressure - control for 2 axis positioning x-axis 80m/min and y-axis 30m/min, - memory capacity approx. 10.000 programs - position wagon/carriage, 2 material support table, material standard gauge railway, - electric cabinet, control panel, hydr. aggregate accessories: - 1 position trolley, 2 material support tables, material web, control panel, hydraulic unit, deburring device Equipment: - 2 pieces drill sleeves, roller track 1800x1000mm and roller tracks 2x1000mm Hsdpsu Id Ruefx Aacsnu Machine is not under power and ready for transport. *

Condition: used, Magnet Drilling Machine, Magnet Drilling Machine core hole drilling machine, metal core hole drilling machine DR. BENDER Type EK 323 machine no. 180543 year of construction approx. 1988 drilling capacity 23 mm spindle mounting MK 2 spindle speed 160 / 400 / 1250 rpm. magnet 215 x 105 mm drilling unit 220 Volt, 50 Hz, 1025 Watt E-magnet 220 Volt, 50 Hz, 65 Watt - Spindle speed via 3 gear steps - left and right rotation - E-magnet KOCH, type KL32/6 Hedpfxogmi U De Aacsnu - drill head height adjustment guided in linear guide - manual ejector - drill stand rotatable on magnetic base, clamping via tommy screw dimension L x W x H 680 x 380 x 630 mm weight 35 kg good condition

Condition: used, Year of construction: 1988, 220 V Hnodpfx Asndz Npoacju frequency 50 Hz combination machine ja extensive accessories ca. 50 Sätze pressure 50 t

Condition: reconditioned (used), punching force: 100 t, sheet thickness steel (max.): 40 mm, Mubea / Muhr and Bender hole punching machine VP1000 - Hydraulic hole punch with CNC coordinate table Hnsdpfjvl Hx Esx Aacju - 5-punch tool with quick-change system and automatic punch selection - Punching force: 100 tons - Throat: 620 mm - Stroke: 60 mm - Punches up to: Ø 40 in 20 mm Ø 10 in 30 mm - Max. plate size: 1200 x 750 mm - Max. plate thickness: 40 mm - Travel speed 21 m/min Special tools and devices on request. Trade-in of used machines. Delivery possible throughout Europe.

Condition: used, functionality: fully functional, We currently have a Roundo bending machine available for sale. This machine is capable of bending large-size wide-flange beams — even when cold — into radii or cambered shapes. It is a robust and versatile unit, ideal for companies looking to enhance or expand their steel-forming capabilities. Hnedexn I Rwspfx Aacsu

Condition: new, The Universal Bender, a Folding Machine within the Folding Machines category, is designed for simple manual bending of flat, square, and round materials. This robust tool features a straightforward plug-in system that allows for quick and convenient tooling, making it capable of executing a wide variety of bends, including angles, radii, and coils. Ideal for producing grids, doors, gates, balcony railings, patio furniture, and even wrought iron lamps, the Universal Bender handles round bars up to 15 mm, square bars up to 13 mm, and flat bars up to 30 x 8 mm with ease, thanks to its hardened bending segments. If you’re looking to enhance your sheet metal processing capabilities, this precise bender is an excellent choice. You can request a quote to obtain more information about this essential tool for any metalworking shop, ensuring high-quality results in the Folding Machines product group. Hedpsv Iaxwefx Aacjnu

Condition: used, Year of construction: 2014, tube diameter 60 mm wall strength 3 mm bending radius min. 2 x Rohr-Ø ÷ R200 mm 0 - 180 ° 2" (60.,3mm) mm stufenlos 0,5 - 2,0 1,5 kW 700 kg - Powerful mandrel bending machine up to 2 "gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping Hedpfx Asivqrbeacenu - mandrel feed / extract - 30 programs x 9 bending angle + correction angle

Condition: good (used), Year of construction: 2006, machine/vehicle number: 4806067, Offer 25059 Technical data: - Pipe bending capacity at 45 kg / mm² up to Ø 48 X 3.5 mm - Solid material up to 30 mm - Bending angle 0 - 180 ° - Largest average bending radius Rm 225 mm Hnsdpfxev Dux Do Aacju - Smallest inner bending radius Ri 10 mm - Drive 220 V / 1.7 Kw - Space requirement approx. W 400 x H 950 x D 600 mm - Weight approx. 100 kg - with - Bending angle preselection - Digital bending angle display + bending angle fine adjustment - Bending tools, Ø ½“ R 67 mm, Ø 1“ R 67 mm,

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, control type: CNC control, Equipment: documentation/manual, Technical data: Useful length: 3240 mm Performance at 400N/mm2: 6.00 mm Stroke of upper beam: 1030 mm Bending beam adjustment: 180 mm Drive power upper beam: 2x 9.45 kW Drive power bending beam: 2x 9.42 kW Upper beam Upper beam pre-stop from 15 mm Geometry: 180° Hydraulic tool clamping (WZS 5000) Hnsdpfx Aaoxn Dhlocsu Bending beam Up’n Down bending beam, program-controlled Pneumatic clamping WZS 7000 Motorized bending beam adjustment 180 mm Motorized bending center adjustment 100 mm Motorized central crowning

Condition: used, Manual pipe bender, pipe bending device, mandrel bending machine Hand-held pipe bender, hand-held wire bending machine, bending machine Manufacturer: MEWAG Bending capacity: max. Ø 16 mm 1 bending tool Ø 15 mm with 25 mm bending radius 1 bending tool Ø 10 mm with 16 mm bending radius 1 bending tool Ø 8 mm with 9 mm bending radius 1 bending tool Ø 6 mm with 8 mm bending radius 1 bending tool Ø 5 mm with 8 mm bending radius - Rotating plate with degree markings - Scope of delivery as shown - Wooden box for storage Dimensions L x W x H: 570 x 480 x 145 mm Hnodewhf Hfopfx Aacou Weight: 43 kg Good condition

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Automatic spacer bender WHS2 The automatic spacer bender machine WHS is suitable to bend aluminum and Warm Edge bars: Chromatech Ultra, TGI Spacer M, Thermix TX.N Plus, Thermobar, Multitech, Swisspacer Advance, Swisspacer Ultimate. Hnodsv Epfuspfx Aacju It is possible to create square and rectangular, straight shapes like trapezium, triangle, pentagon and optionally are available curves and arcs shapes. The interface operations are done using a Personal Computer, the program is easy to use and allows the users to manage all the working parameters, as well as set up specific condition for different type of spacers. The program to optimize the work can optimize up to 1,200 different measures of work, considering the type and color of material used and width. The program can be interfaced with the most used optimization software of cutting tables (Perfect Cut, Optima, Albat-Wirsam, Hanic, etc). The program is available in Italian, English, French, Spanish, German. The machinery is equipped with tele-assistance and video-assistance. Technical features Workable spacers: H 6-7 mm; Aluminum / Chromatech Ultra / TGI Spacer M / Thermix TX.N Plus / Thermobar / Multitech / Swisspacer Advance / Swisspacer Ultimate 8-24 mm. Spacer frames min size: 200x280mm. Spacer frames max size: 1800x2450mm in one step (larger size in two steps) Bender dimension: L 4,850mm, W 2,040mm, H 2,550mm. Spacer stock dimension: L 5,500mm, W 1,300mm, H 1,650mm

Condition: new, The Hydraulic Tube Bender 1/2 is a compact and mobile Tube Bending Machine designed for bending steel tubes of larger diameters with a powerful manual hydraulic pump. This machine boasts a capacity of 10 tons and comes complete with dies for commonly used tube dimensions, allowing you to create bends of up to 90 degrees. With its robust 3-leg stand and 6 bending segments, it ensures stability and ease of use during operation. The included attachments cater to various diameters, making this versatile tool ideal for your tube and profile processing needs. You can efficiently bend tubes while enjoying the benefits of its portable design. If you require a reliable Tube Bending Machine, consider the Hydraulic Tube Bender 1/2 from KNUTH to enhance your workshop capabilities. Don't hesitate to request a quote today! Hnjdpeuzlh Isfx Aacou

Condition: new, functionality: fully functional, Year of construction: 2025, working width: 6,400 mm, bending angle (max.): 150 °, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness brass (max.): 3 mm, sheet thickness copper (max.): 3 mm, overall weight: 17,750 kg, total length: 8,000 mm, total width: 1,800 mm, total height: 1,875 mm, warranty duration: 12 months, Equipment: documentation/manual, safety light barrier, EVOBEND D-Series: Flexibility and speed at the highest level Maximum flexibility and precision The EVOBEND D-Series, equipped with the SmartBend principle, offers unparalleled versatility. Complex profiles that could previously be finalized manually or not made at all can now be produced fully automatically. The innovative bending technology ensures fast and precise results thanks to minimal, simultaneous movements. Highest speed As the fastest long folding machine, the EVOBEND D series works with maximum efficiency regardless of the machine size. Each axis can be controlled individually to optimize the entire bending process. This allows the speed to be adapted to specific work steps and material requirements. Hodpsfrlpuefx Aacenu Compact design The sophisticated design of the EVOBEND D series saves valuable space in your production hall. With an insertion depth of 1250 mm and a working length of 6400 mm, the D600 machine requires significantly less space than comparable models. This optimizes the production flow and facilitates integration into existing workflows. Safety and efficiency Our machines are fully enclosed, which not only protects the operator but also the machine from external influences. Retractable safety fences and integrated light barriers ensure maximum work safety. The risk of injury is further minimized by dispensing with swing-out bending beams. Robustness and low maintenance Thanks to the use of high-quality components such as precision-manufactured parts and an all-electric drive system, the EVOBEND D series is extremely durable and requires minimal maintenance. The absence of hydraulic components reduces the risk of breakdowns and significantly reduces maintenance costs. Sustainability and low noise With up to 90 % lower energy consumption compared to conventional machines, the EVOBEND D series is both economically and ecologically advantageous. The quiet, electric drive technology also ensures a pleasant working environment and reduces noise pollution. Material-friendly bending technology The innovative bending principle reduces marks and damage to the workpiece to a minimum. The electric clamping beam drive adapts flexibly to different material types and thicknesses, enabling the gentlest possible processing. Top standard as standard Every EVOBEND D-Series machine is equipped with the highest quality components and functions as standard. From the dual-track gripper system to automatic adaptation to material type and thickness - EVOBEND offers uncompromising quality for demanding bending tasks.

Condition: good (used), Year of construction: 2003, Offer 24365 Technical data: - Bending performance tube at 45 kg/mm² up to Ø 60 X 4 mm - Solid material up to 45 mm Hnsdpfx Aswq I Epsacou - Bending angle 0 - 180° - Largest median bending radius Rm 171 mm - Smallest inner bending radius Ri 10 mm - Drive 400 V / 4 kW - Space requirement approx. W 400 x H 950 x D 600 mm - Weight approx. 100 kg - with preselection of bending angle - Digital bending angle display + fine adjustment of bending angle - Manual pipe twisting device - Bending tools 22 R 67 mm, 25 R 82 mm, 35 R 110 mm - Flat steel bending attachment

Condition: new, Year of construction: 2025, The Prod-Masz company has had a good reputation for decades. We voluntarily face the strict and certified quality controls and offer you maximum quality, reliability and satisfaction! Of course we are happy to answer your questions personally and thank you for your interest in our company. Semi-automatic folding bench ZGH-3140 / 1.2mm: -ᐳ semi-automatic bending angle, is set on the encoder and potentiometer -ᐳ The machine works like a semi-automatic machine. After bending, the cheek returns to the starting position and the pressure cheek returns to the set height. It is set to 10 mm. -ᐳ This machine is suitable for series production the maximum working length 3140 mm the max. Sheet thickness for 1.2 mm (steel) the weight about 1400 kilograms of the hand machine lifting the top beam in three positions Bending beam: 30mm The max. clear width between the bars 100 mm Bending angle: 155 degrees Delivery date: every week L: 3.5m, W: 1.2m, H: 1.5m -ᐳ Adjustable support bars with scale optionally plus 1250 euros Hnodpec Nxvkefx Aaceu We are looking forward to your contact! We issue the invoices with 0% (intra-community delivery).

Condition: new, Year of construction: 2025, FORMA Z folding machine is the most flexible and diverse sheet metal folding machine in our portfolio. Folding both up and down, FORMA Z folding machine eliminates the need to flip material, providing time-efficient folding of complex parts using one operator. The Combi beam rotation between two tooling set ups and the unique geometry gives you unrivalled working space. The automatic tool locking is fast and has features making tool changing very ergonomical. The folding beam has automatic crowning, automatic folding center adjustment and automatic sheet thickness adjustment, which provides superior folding quality in all thicknesses and across the folding length. The large number of vacuum grippers holds the part steadily, anywhere on the back gauge. Large blanks as well as small, one as well as several. The back gauge comes in many designs, which gives you great freedom of choice in how you would like to operate the machine and manage the flow of blanks and parts to/from the machine. Last, but not least – FORMA Z is fast: more production in less time for you! - CNC controlled crowning of folding beam - CNC folder that folds upward and downward, no need to flip the material. - 150 mm movement of folding beam, to move outside of material on folding side. - The Combi beam comes equipped with 203 mm (8”) High Divided Tools and straight rail. Hnjdpfjmhhn Eex Aacou - Comes as standard with multifold tooling, CNC controlled sheet thickness and folding center adjustment. - The folding beam can be used as front gauge up to 150 mm. - Add vacuum grippers to make work lighter, more precise, and automated!

Condition: new, Year of construction: 2020, Electric elbow making machine is the mechanism for forming elbow from round and rectangular pipes with different diameters. Elbow making machine EEM-200plus is the better version of EEM-200 machine. It has additional fourth bottom pressing tool so it presses pipes from all four sides while bending and provides better quality of elbow. You can use our machine for working with round pipes as with rectangular pipes. Elbow making machine EEM-200plus lets you to work with pipes from 80 to 200mm. Pay attention: Inside diameter of the pipe you use for bending has to be 1mm bigger than bending matrix of the machine!! The lock of the pipe has to be closed or welded to avoid opening of pipe while bending!! Hnjdpfx Asf Epznjaceu Elbow making machine EEM-200 is electric so it doesn’t need any air or oil system to work. Electric consumption is 1.5 kW/hour for this elbow machine. The needed voltage is 380V. It could be used in environment with temperature from -5 to +45 Celsius degrees. Elbow making machine is good for bending pipes with maximum thickness 0.8mm. Elbow making machine EEM-200plus bends elbows thank to special pressing tools. There is one set of tools for bending one diameter of pipe you need. So to bend more diameters of pipes you have to get additional pressing tools. It goes four pressing set tools with the machine so you can bend four diameters of pipes with it in the range from 80 to 200mm (that you choose by your own)

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 32 mm, bending angle (max.): 190 °, bending radius (max.): 200 mm, power: 9 kW (12.24 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Inverter, operating speed: 99 mm/s, pressure: 130 bar, wall thickness: 2 mm, working length: 1,920 mm, Equipment: documentation/manual, 32x2mm Semi Automatic NC Tube Bending Machine The “Atlas” tube bending machines are nc structures. This type of tube benders includes hydraulic and pneumatic for all clamping and pushing operations. Atlas has 3 different type which are B, BR, BRF. B series makes bending operation automatically. BR series makes bending and rotating operation automatically. BRF series makes bending, rotating and feeding operation automatically. Hsdpfx Aasvx D D Secjnu A.C servo engine control gives semi automatic bending capability for BR and BRF series. With ergonomic loading height, machine is accordance with health and safety instructions and can avoid the ergonomy problems. Improvable program setup settings for optimizing the results of your bending projects, program setup settings that can be developed. With energy saving mode, your energy efficiency will be increased, the nature and our future can be protected. Inverter control system, a new generation of precision bending system, can help to optimally actualize your bending project. Powerbend mode will help the bending process of your difficult bending materials. User-friendly, easy and quick to learn interface which allows you to quickly start the new projects. Easy to use with min 7-inch touch screen HMI. Fast and accurate bending with minimal friction with the help of Linear Guide. Flexible bending ability with the help of rotation of bending head. Bending precision will be top level with the help of Non-Vibrating structure. Easy to understand and solve the problems with the help of end user error messages, it will help to keep your business on running. Quality bending with wiper, ball mandrel and other systems.

Condition: new, Year of construction: 2025, Delivery every week - RELIABLE! Are you looking for a folding machine? You expect quality, reliability. You can rely on competent advice and accurate, punctual delivery by the well-established Prod-Masz team. Direct from the manufacturer! Folding machine 2140T/0.8 incl. transport wheels Technical specifications: - maximum working width: 2140 mm - Bending performance: up to 0.8 mm (steel sheet) - Titanium zinc sheet 0.8 mm, aluminum sheet 1.2 mm copper sheet 1.25 mm - Bending angle: max 145 degrees - the cut with the roller shears over the entire working width - Bending beam thickness: 15 mm - the cut with the roller shears over the entire working width - lifting of the upper beam in three positions - Upper beam stroke: 80 mm - degree scale - Weight: about 150 kg - The rotary shears (max. cutting capacity 0.8 mm / steel) + 350 euros - The machine complies with CE guidelines and has a 12-month guarantee. - transport wheels incl. Price: €1,350.00 Short delivery times! Ordered today - delivered next week! Hjdpfxjb Hd Dlj Aacjnu We are looking forward to your contact! We issue the invoices with 0% (intra-community delivery).

Condition: new, Year of construction: 2025, Sheet metal folder 3140/0.8 PROD-MASZ company is one of the biggest manufacturer of Metal Plate Folding Machines in Europe. Our products are best quality and have certificate CE. You are buying directly from manufacturer ! Technical details: max. working length: 3140 mm bending capacity: 0,8 mm (steel) 1,2 mm (aluminum, zinc and copper) bending angle: max. 145 degrees thickness of bending bar: 24 mm passage: 80 mm Hnjdpscxu Ugofx Aacju rotary shears +350 Euro Protractor Servomotors Angle stop for constant bending angle Weight: 400 kg Warrenty 12 months Certificate CE Price excl. shipping We provide invoices with 0% of tax. Delivery every week :)

Condition: new, Year of construction: 2025, Sheet metal folder directly from polish manufacturer Prod-Masz. Plate Bending Machine ZGR-3000,8 Technical data: - Maximum working width: 3140 mm - Sheet gauge up to: 0,8 mm (Steel) - Titan-Zinc-Plate 0,8 mm, Aluminium Plate 1,2 mm Cooper plate 1,2 mm - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 24 mm - Protractor - Weight: 400 kg - Rotary shears (max. plate gauge 0,8 mm / Steel) + 350 Euro - The machine have certificate CE and 12 months warranty. Price: 2050 Euro Shipping costs: its dependent on destination point ONLY SHIPPING IS POSSIBLE We provide invoices with 0% of tax. Hodscl Ixqepfx Aacenu Payment in cash or by bank transfer in advance.