Used Bundle Turner for sale (541)

Condition: like new (used), Year of construction: 2003, functionality: fully functional, 30 packs/min – Siemens Simatic OP7 Shrink wrapping and bundling machine suitable for cosmetics and small packaged products. The machine forms bundles and wraps them in film, followed by a shrink tunnel for tight packaging. Equipped with upper and lower film reels and a manual film splicing system. The shrink tunnel features a cooling section at the exit and adjustable speed control. The machine accommodates different product and bundle formats and is supplied with documentation. Maximum output: 30 packs/min Hinge chain conveyor width: 80 mm Shrink tunnel conveyor width: 480 mm Control panel: Siemens Simatic OP7 Film system: Upper and lower film reels with manual splicing Shrink tunnel: With cooling section at the exit Speed control: Adjustable Gusdpfxsyt Hiqs Ai Nsc Product size (min / max) Length: 50 – 100 mm Height: 100 – 300 mm Width: 25 – 60 mm Bundle size (min / max) Length: 75 – 330 mm Height: 100 – 300 mm Width: 50 – 100 mm Additional information Overfeed system included Upper and lower film roll holders Documentation available

Condition: excellent (used), functionality: fully functional, ARI high capacity line for big logs Log deck 2 sections Step feeder Log conveyor Debarker infeed (Remill) Debarker Cambio 90-75/6 (or a Cambio 500) 2d scanner for reject boxes Log conveyor with 2 reject boxes Godpfxowp E Tno Ai Neuc Log conveyor, kickers to the left Buffering deck and step feeder Log conveyor Rema 3d scanner AriVislanda LT2 auto log turner 2006 AriVislanda LI-600 log centering infeed 2006 AriVislanda RL-600 Reducer AriVislanda QSS-700 Saw 2011 AriVislanda VFW 600 L 2011 AriVislanda board separator 2006 Block tilt AriVislanda block infeed type Nils AriVislanda RC-600 Reducer Ingvar Persson turn table AriVislanda 500A Infeed AriVislanda 509-7F Multirip AriVislanda boardseparator Beltconveyor Dual Edging lines Söderhamn (1 left 1 right) 2 x 300 m/min Cross conveyors Söderhamn Elevator Söderhamn 483 Scanners Söderhamn 528 Infeed Söderhamn 5100 Edger Söderhamn 5400 Edger outfeed with reject displacement EdgeIT system

Condition: new, functionality: fully functional, 2 speeds 35/75 m/min Saw blade speed 15-150 m/min Saw blade dimensions 4200x34x1.1 mm Cutting range at 90 degrees: round 325 mm Cutting range at 90 degrees: flat 500x300 mm Cutting range at 45 degrees right: round 300 mm Cutting range at 45 degrees right: flat 300x300 mm Cutting range at 30 degrees right: round 200 mm Cutting range at 30 degrees right: flat 200x200 mm Cutting range at 45 degrees left: round 300 mm Cutting range at 45 degrees left: flat 300x300 mm Minimum remnant length without bundle clamping – manual 85 mm Minimum remnant length with bundle clamping – manual 260 mm Smallest diameter 5 mm Working height 750 mm Total power requirement 3.0 kW Dimensions 1450x2200x1400 mm Equipment/Accessories: - Rapid mitre adjustment from 30° to 150° stepless, digital mitre display to 0.1° Godpfx Ajx Sq Tfsi Njuc - Quick material clamping: Material is clamped parallel at 90° in every saw frame angle - MEBA high-performance package version “HSS” – Hydraulic lifting and lowering of the saw frame and hydraulic clamping of the material Stepless hydraulic cutting pressure and feed regulation Display of lowering speed via scale. Cut-through display via manometer. Rapid saw frame lowering via push button to material edge - Frequency-controlled AC drive 15–150 m/min – 3 kW - Full-stroke hydraulic material clamping - Machine base with chip collection tray - Saw blade drive with limit switch - Precision saw blade carbide roller guides, saw blade brush - Complete coolant system with electric immersion pump - 1 saw blade on the machine, 4-6 TPI

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 3,700 mm, total height: 2,800 mm, total length: 4,300 mm, Oy Foudila Ab is a company based in Kaskinen, Finland, with over 45 years of experience in wood processing equipment. In the past 15–20 years, we have also been active in the pallet industry, developing numerous machines for nailing, automatic wood feeding, and stacking. We manufacture both standard machines and custom solutions, as standalone units or as part of complete production lines, tailored to our customers’ requirements. This machine is a flexible and efficient automatic board feeder, specifically developed for pallet production machines but also perfectly suited to other applications in the wood industry. The machine is designed to integrate seamlessly with deck nailers and leg nailers—regardless of brand or capacity. We have supplied automatic board feeding systems, among others, for nailers from Cape, Corali, Storti, IMH, IM Hart, Viking, and Mychrome. Thanks to the reliable vacuum system and the maintenance-free, one-piece feeder—based on our own solution developed and patented over 40 years ago—only minimal adjustments are necessary when changing formats. This results in short changeover times and high operational reliability. The machine comes equipped with a tiltable pack lifter, which inclines the package by approximately 10 degrees. This ensures that the boards remain stable and do not fall apart when the strapping is removed—even if the boards in the pack are not perfectly aligned. Optional equipment includes: - Automatic board turner Gjdsy Iy Rlopfx Ai Nouc - Vision/camera system - Automatic removal of spacers between board layers The result with these feeding systems is a reliable, flexible, and high-quality solution that enables more productive and cost-efficient pallet manufacturing. Material dimensions (standard machine): Board length: 600–1600 mm, Board width: 60–150 mm, Board thickness: 16–32 mm Pack length: 800–1600 mm (packs with boards shorter than 800 mm should be placed on a EUR pallet), Pack width: 800–1200 mm, Pack height: 0–1400 mm Feeding rate: 50 boards/min (for 100 mm board width) Machine dimensions (LxWxH): 4300x3700x2800 mm The machine is CE marked. Please do not hesitate to contact us for further information as well as photos and videos.

Condition: good (used), Year of construction: 2012, Ref. -No.: 10469 Manufacturer: JAESPA Type: Comfort 420 A Year of construction: 2012 Storage location: Halberstadt Machine-No.: 233XXXXX Weight Of The Machine Ca.: 2500 kg Machine length: 2400 mm Machine width: 2800 mm Machine Height: 1700 mm Bending capacity square tube: 420 x 420 mm Bending capacity round bar: 420 mm Bundle min.: 215 x 65 mm Bundle max.: 420 x 170 mm Flat: 420 x 420 mm Roll diameter: 590 mm Saw band dimensions: 4100 x 1300 x 4780 mm Belt speed: 15 - 100 m/min. Operating pressure: 50 bar Flow rate: 6,5 l/min Tank capacity: 40 liter Coolant content: 50 liter Material support height: 800 mm Saw motor: 5,5 kW hydraulic motor: 0,75 kW coolant pump: 0,12 kW Chip brush: 0,09 kW Chip conveyor: 0,18 kW Gedpfx Aoy Ed D Dji Nouc Measurement standard: DIN EN 23746

Year of construction: 2023, operating hours: 770 h, condition: ready for operation (used), Wood production line manufactured in 2023. This ISM ATM-01 is a custom-made automatic production line designed for the fully automated manufacturing of wooden garden screens from individual planks. It features automatic discharge and stacking of finished screens, tilting stacks for efficient processing, and is adjustable for five different screen types. If you are looking to get high-quality wood processing capabilities, consider the ISM ATM-01 machine we have for sale. Contact us for further details. • Type: Automatic production line for wooden garden screens (custom-made) • Process: Manual loading of planks and intermediate slats into magazines; fully automatic production thereafter • Features: • Automatic discharge and stacking of finished screens • Tilting stacks for efficient processing • Adjustable for 5 different screen types • Last maintenance: June 2025 • Documentation: User manual, spare parts list, technical drawings, CE dossier Gsdpfx Aisy Am Awj Njuc

Year of construction: 2021, operating hours: 5,000 h, condition: used, functionality: fully functional, EPS Complete Production Line For cutting and packaging EPS blocks: Model: VIRO HV Q-4 Y 2021, Price: €459,000 Includes a side scrap handling unit, bale/bundle packaging unit, bale marking and paint marking unit for color-coding bales, and a separate dust compaction unit for stack formation. Also includes a weighing unit, automatic block tilting, automatic cutting wire adjustment, optional manual removal, and a semi-automatic equipment group for producing bales with a minimum size of 50x100 cm and for creating stacks. Designed for handling blocks 3-4 meters long. Used for 5,000 operating hours. In like-new condition. EPS Block Molding Machine: Erlenbach Y2004 EBV 3080x1040x1040, Price: €77,000 EPS block production equipment, automatic operation, with mixing of fresh and recycled materials. Reliable, accurate, and easy to operate. Used for 18,000 operating hours. EPS Pre-Expander: Y 2008 Erlenbach Pre-expander EVD 1000, Price: €42,500 Batch pre-expansion equipment with automatic weighing and fluidized bed. Reliable, precise. Used for 18,000 operating hours. Steam Boiler Y2008, Manufacturer VASFA Kft Szolnok, Type AKH 1/12 EU, Price: €51,000 1 t/h, 660 kW Gedpezcdqqjfx Ai Nsuc Operating pressure: 12 bar Checked pressure: 19.4 bar Reliable, continuously maintained. Used for 18,000 operating hours.

Condition: new, Year of construction: 2025, Schnittbereich rund: 530 mm Cutting area, square (W x H): 530 x 530 mm Smallest size that can be cut: 20 x 20 mm Clamping range: 0 - 530 mm Bundle cutting range (min. W x H - max. W x H): 145 x 110 - 270 x 200 mm Shortest length of cut piece : 5 mm Shortest remaining piece length in automatic mode*: 190 mm Shortest remaining piece length in single cut: 20 mm Length: 2220 mm Width including chip conveyor: 3530 mm Height: 2530 mm Weight of machine approx.: 3700 kg Electrical connected load: 11,5 kW Saw motor power: 7,5 kW Hydraulic motor power: 1,5 kW Cutting speed continuously adjustable: 20 - 80 m / min Feed speed of the saw: 1 - 300 mm / min Automatic material feed length, single stroke: 500 mm Guedpfjwqchljx Ai Noc Length of automatic material feed, multiple strokes: 9999 mm Dimensions of the saw blade: 6300 x 54 x 1,6 mm Standard configuration Fully enclosed protection according to CE standardJLH-EHASaw MasterCE Electrical safetyPermanent magnetic synchronisation. MotorSaw arm Anti-collision detectionLED work lightLaser line projectionSaw blade breakage detectionSawing depth controlHMI+buttonsInverterDeviation detectorHydraulic belt tensionerVice differential pressure valvesAutomatic chip conveyor (spiral)Hydraulic belt guide tensionerVice pressure regulatorMotorised chip brushCooling fan for hydraulicsAutomatic lubrication deviceWork table with rollersHydraulic feedMain drive Precision gearboxSplit vice clampingMovable guide arm hydraulically clampedChip container 40(L)Tool box (wire brush, levelling pads, spare paint)One-piece saw blade

Condition: excellent (used), Year of construction: 2007, overall weight: 2,000 kg, Behringer HBP263A (1000-KGT Machine in perfect condition Bundle clamping system Single feed stroke 1000mm x 999 Dual cooling system: oil mist lubrication and coolant Technical data: Cutting range at 90° (round/square): 260 mm / 260 x 260 mm Godeywr Stspfx Ai Nsuc Cutting range at 90° (flat): 300 x 260 mm Cutting speed (variable): 20–120 m/min Blade dimensions: 4640 x 34 x 1.10 mm Saw motor power: 3.00 kW Total power requirement: 8.00 kW Minimum cutting length/diameter: 10 mm / 15 mm Machine weight: approx. 2000 kg Dimensions (L x W x H): approx. 2.60 x 1.60 x 1.90 m Supplied with 5 new saw blades - Infeed and outfeed roller conveyor - Complete original technical documentation Machine can be inspected in Głosków near Warsaw Transport can be organized anywhere in the EU

Condition: ready for operation (used), Year of construction: 2014, operating hours: 20,652 h, total height: 2,380 mm, total width: 1,200 mm, overall weight: 13,000 kg, product length (max.): 6,800 mm, Complete cut-off grinding system manufactured in 2014. This HARALD BAUGMARTEN TM 400 S features a press force of 3500 kN and a cutting speed of approximately 30 mm/s at 500 kN. It includes a robust hydraulic system with a total drive power of 30 kW and a machine weight of around 13,000 kg. If you are looking to get high-quality cutting capabilities, consider the HARALD BAUGMARTEN TM 400 S complete cut-off grinding system we have for sale. Contact us for further details. • Press (holding) • Force: 3500 kN • Stroke: 50 mm • Speed at 500 kN: approx. 30 mm/s • Speed at 3500 kN: approx. 4 mm/s • Return speed: 60 mm/s • Press (cutting) • Force: 2500 kN • Stroke: 100 mm • Speed at 500 kN: approx. 30 mm/s • Speed at 2500 kN: approx. 5 mm/s • Shock damping stroke: 20 mm • Drive and power • Hydraulic pump power: 2 × 15 kW • Total hydraulic drive power: 30 kW • Cooling unit power: 3 kW • Hydraulic unit power: 3 kW • Pipe connections (machine to hydraulic unit) • 2 × Ø38 × 4 mm • 2 × Ø30 × 4 mm • 1 × Ø20 × 3 mm • Mechanical adjustment tolerance: ±5 mm • Operating hours • Hydraulic unit 1: 20,652.8 h • Hydraulic unit 2: 20,641.8 h • Main system components (core machine) • Cut-off grinding machine type TM 400 S (manufacturer: Sema Systemtechnik) • Four-column press (manufacturer: Winter Pressen) • Hydraulic power unit with hydraulic pumps Godpfjyzp Iasx Ai Nouc • Control cabinet and operator panel Additional equipment • Automatic bar feeder with bundle loader • Bar breaking device • Bar rotary drive / measuring station • Weighing station with section sorting • Extraction and filter system • Soundproof booth (HüWa Schallschutz und Anlagenbau) and protective fencing

Condition: reconditioned (used), Year of construction: 1991, functionality: fully functional, total height: 2,000 mm, total length: 2,000 mm, total width: 2,000 mm, saw band length: 4,115 mm, saw band width: 41 mm, Fully hydraulic high-performance bandsaw in heavy-duty construction, featuring a horizontally parallel-moving saw band, designed for cutting profiles, tubes, and solid material of all qualities, including extremely difficult-to-machine materials (such as titanium, Inconel, Hastelloy). Suitable for use with bi-metal and carbide-tipped saw bands. Saw unit manufactured in solid polymer concrete, ensuring maximum running smoothness and extended saw blade service life. Guodpsxc D Egofx Ai Nsc The saw unit is guided via a vertical and a round-column guide (double-column guide), with hardened and ground guide rails. Hydraulic saw band tensioning and hydraulically preloaded carbide saw band guides. Material clamping is achieved via two hydraulic vises. The machine operation is user-friendly. Cutting length can be set using a hand wheel, with a resolution of 0.1 mm. Piece count is set via a piece counter; upon reaching the set quantity, the machine switches off automatically. Material feed is executed by a feed cylinder, ensuring the highest cutting accuracy. The machines are easy to operate and work fully automatically. Model: SSB 260 VA Cutting capacity: 260 mm x 260 mm (Ø 260 mm) Technical Data: Bandsaw KASTO Bandsaw Automatic Machine Machine Type: SSB 260 VA Technical Data: 2-column guided Year of manufacture: 1991 Cutting range: 260 x 260 mm Drive power, saw gearbox: 4 kW Drive power, auxiliary units: 6.5 kW Cutting speed: 15-125 m/min Saw feed hydraulics: Infinitely adjustable Saw blade dimensions: 4115 x 41 x 1.1 mm Feed length: 600 mm Maximum feed (multiple feed): 5400 mm Material support height: 850 mm Machine dimensions: Length/Width: 1690 x 1900 mm Height: 2030 mm Machine weight: 2100 kg Accessories: - Chip conveyor - Coolant system - Multiple feed - Side guide rollers - Machine roller conveyor - Adjustable side guide rollers - Prepared for bundle clamping device - Multiple feed counter

Condition: used, Year of construction: 2003, Used Shrink Wrapper Tetra Pak year 2003 1200 bundles/hour The Used Shrink Wrapper Tetra Pak year 2003 1200 bundles/hour shrink-wraps products efficiently. Consequently, its fully automated structure and production capacity of 1200 bundles per hour ensure high performance. Technical and Functional Specifications The Used Shrink Wrapper Tetra Pak year 2003 1200 bundles/hour operates with a continuous motion system, thereby maintaining a steady production flow without interruptions. Moreover, the wrapping process applies shrink film, effectively packaging bottles, cartons, and other containers. In addition, the system supports high-speed production lines, thus minimizing downtime and optimizing operational efficiency. Gedpfx Ajv Ew Iwoi Neuc Furthermore, the machine incorporates a straight inline feed system, which allows it to adapt to different conveyor speeds while integrating seamlessly with other machinery in the bottling line. As a result, this configuration simplifies integration into existing plants without requiring complex structural modifications. Shrink Film Characteristics In particular, the Used Shrink Wrapper Tetra Pak  applies standard shrink film, thereby eliminating the need for printed film support. As a consequence, this design increases flexibility in packaging material selection and significantly reduces operating costs. Therefore, the machine remains suitable for diverse industrial applications. Bundling Capability Notably, the bundling system of the Used Shrink Wrapper Tetra Pak creates packs with or without trays, depending on the chosen configuration. Additionally, the machine accommodates various container formats, including bottles, bricks, and cartons, thereby providing high flexibility in production management. Since it runs at 20 bundles per minute, the system efficiently delivers 1200 bundles per hour, making it an excellent choice for high-production plants aiming to optimize workflow. Consequently, businesses can enhance their operational throughput significantly. Shrink Tunnel The Used Shrink Wrapper Tetra Pak includes a high-efficiency shrink tunnel, which ensures uniform sealing and tightening of the film around the bundle. Additionally, the system regulates temperature control, thereby guaranteeing optimal shrinkage without damaging packaged products. As a result, this feature preserves packaging quality and minimizes production waste effectively. Operating Conditions and Safety of the Used Shrink Wrapper Tetra Pak At present, the Used Shrink Wrapper Tetra Pak year 2003 1200 bundles/hour remains in storage condition, thus making it ready for reinstallation and operation. Furthermore, the system incorporates safety devices that protect operators during use, thereby minimizing accident risks and ensuring compliance with industrial regulations. Manufactured in 2003, the Used Shrink Wrapper Tetra Pak continues to provide an efficient, robust, and easily integrable packaging system. Moreover, its modular structure and compatibility with various packaging materials make it a versatile solution for multiple sectors in the food and beverage industry. Ultimately, this machine enables companies to optimize their packaging operations while maintaining high standards of safety and efficiency

Condition: used, operating hours: 11,000 h, Used Bottling Line SIDEL for still water 14400 bph The Used Bottling Line SIDEL for still water 14400 bph delivers a complete solution for bottling still water in PET containers. The line handles 0.50-liter, 0.75-liter, and 1.5-liter bottles, offering flexibility for beverage producers. The Used Bottling Line SIDEL operates at a nominal capacity of 14,400 bottles per hour, making it ideal for medium to high-volume production environments. As a result, technical teams can integrate this system into existing plants or install it as a standalone unit to achieve consistent, high-throughput output. Core Unit of the Used Bottling Line SIDEL: COMBIBLOCK SIDEL 8-40-8 In this Used Bottling Line SIDEL we find the COMBIBLOCK SIDEL 8-40-8, manufactured in 2006, performs blow molding, filling, and capping in a single integrated unit. First, the SBO 8 blow molder forms PET bottles from preforms using 8 cavities, supporting all three bottle formats. Next, the COMBI UNIVERSAL EUROPA WM filler uses 40 volumetric filling valves to deliver precise product dosing and minimize waste during production. Because the system uses volumetric filling, it provides consistent accuracy, especially for low-viscosity products such as still water. Then, the capping unit applies caps using 8 heads on bottles with 25 to 30 mm neck diameters. In addition, operators can perform quick format changes and maintain compatibility with industry-standard closures. Secondary Packaging: CERMEX Tray Packer in the Used Bottling Line SIDEL Following the filling and capping process, the CERMEX tray packer, installed in 2007, arranges and packs bottles in pre-defined tray configurations. It forms the following bundles: 1.5-liter bottles in a 2×3 configuration Gsdsv U Ni Sopfx Ai Nsuc 0.75-liter bottles in a 4×3 configuration 0.50-liter bottles in a 4×3 configuration Consequently, the unit ensures consistent secondary packaging and supports downstream palletizing operations. Moreover, the machine maintains uniformity across batches and eliminates manual packing variability. Therefore, it significantly increases line efficiency. Compressed Air Supply: High and Low-Pressure Compressors The line includes two compressors that support the blow molding and cooling systems. Specifically, the SIAD TEMPO 2 high-pressure compressor delivers 1,500 m³/h and supplies compressed air to the SBO 8 blow molder. In contrast, the BAC F-100 low-pressure compressor, manufactured by Baltimore Aircoil in 2006, supports the evaporative cooling process. Together, these compressors maintain optimal conditions for both product quality and mechanical performance. Bottle Conveying System: SIDEL Conveyors The SIDEL conveyors, installed in 2006, transfer bottles between stations smoothly and efficiently. As a result, the conveyors synchronize movements across modules and prevent accumulation or blockages.

Condition: used, Year of construction: 2013, Used Shrink Wrapper ITAL PAL FCN70 + PK300T1  1650 Bundles/Hour The Used Shrink Wrapper ITAL PAL FCN70 + PK300T1  1650 Bundles/Hour is a machine designed for shrink film packaging, ensuring high performance and reliability. Consequently, this model, manufactured in 2013, operates at a speed of 1650 bundles per hour, making it suitable for high-efficiency production environments. Technical Features of the Used Shrink Wrapper ITAL PAL FNC70+ PC300T1 1650 Bundles/Hour First of all, the machine features a straight entry configuration, allowing a linear handling of containers before film wrapping. Additionally, it works with neutral film, but it also supports printed films, enabling packaging customization according to production requirements. Moreover, the system includes a tray, which is essential for product stability during the packaging process. It processes formats ranging from 3 to 24 pieces per carton, with an adjustable configuration based on container volume. Similarly, the machine operates with American boxes, a widely used packaging type in the industry to ensure product protection and durability. Electrical Specifications and Energy Consumption Furthermore, the system operates with a voltage of 380V, a power consumption of 10 kW, and a frequency of 50 Hz, meeting industrial standards for this type of machinery. Given these specifications, the shrink wrapper dimensions are 3400 mm in length and 2400 mm in depth, making it compatible with many existing production lines. Container Compatibility In particular, the Used Shrink Wrapper ITAL PAL FCN70 + PK300T1  processes various types of containers, primarily focusing on glass bottles and cans, offering operational flexibility for different industrial sectors, including the beverage and food industries. As a result, manufacturers benefit from a machine that efficiently handles diverse packaging needs. Operational Status and Maintenance Notably, the machine is currently in production, ensuring full operational functionality and proper performance of all its components. Additionally, both technical manuals and safety protections are available, complying with industrial safety regulations. In addition to these features, the shrink wrapper has undergone periodic revisions, maintaining consistent performance and minimizing the risk of machine downtime. Furthermore, spare parts are available, facilitating routine and extraordinary maintenance without affecting productivity. Guedpsv Ew Rlsfx Ai Njc Conclusion of this Used Shrink Wrapper ITAL PAL To sum up, the used ITAL PAL FCN70 + PK300T1 shrink wrapper is an optimal solution for those seeking a reliable machine with high production capacity. Consequently, its versatile configuration, compatibility with different packaging formats, and guaranteed maintenance make it ideal for automated packaging lines. Given its efficiency, the 1650 bundles per hour speed, combined with compatibility with neutral and printed films, makes it a strategic choice for optimizing industrial packaging processes. Therefore, this machine is an excellent investment for businesses aiming to enhance their packaging efficiency.

Condition: used, No. 3198 Machine package painting & surface treatment BUETFERING, HEESEMANN, Barberan Used Consisting of: - Wide belt sanding machine BUETFERING Classic 313 - QCE - UV lacquer roller Barberan BRB - 1400 - Drying channel Barberan HOK - 14/2 - Lacquer sanding machine HEESEMANN FGA 8 - Suction unit Schuko Vacomat S/N 25/45 Technical data: - Wide belt sanding machine BUETFERING Classic 313 - QCE Used, year of construction 2000 Sanding width 1350 mm Sanding belt width cross belt 150 mm Sanding belt length cross belt 4700 mm Sanding belt width wide belt 1370 mm Sanding belt length wide belt 1900 mm Workpiece thickness 3 - 150 mm Feed infinitely variable 2.5 - 13 m/min Power cross belt 15 kW 1st wide belt 12.5/16 kW Guedpfxevxryne Ai Noc 2nd wide belt 11 kW Total connection 49 kW Sanding of veneered workpieces with the cross sanding unit and the link pressure beam in one or two passes Precise calibration with the contact roller of the 2nd unit Sanding solid wood: 1st pass with the contact roller / 2nd pass with the cross sanding unit and the link pressure beam Weight of the machine 4500 kg - UV lacquer roller Barberan BRB - 1400 Used, year of construction 2006 For application of primer and top coat - Drying channel Barberan HOK - 14/2 Used, year of construction 2006 With half pressure lamp made of mercury or gallium, with an output of 80 W/cm or 120 W/cm Elliptical point reflector, air cooled, made of aluminum Air cooling system for each lamp or reflector - Lacquer sanding machine HEESEMANN FGA 8 Used, year of construction 1994 Multi-purpose surface sanding machine 1 sanding belt, oscillating Sanding belt width 1350 mm Drive 11 kW Workpiece height max. 140 mm Sanding belt dimensions 2620 x 1350 mm LW - Suction unit Schuko Vacomat S/N 25/45 Used, year of construction 2000 Filter area 45 m2 Sale on behalf of the customer, ex location near 86156 Augsburg, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Errors in the description and price excepted To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Equipment: documentation/manual, SCM - STEFANI AUTOMATIC DOUBLE-SIDED FORMATING & EDGEBENDING LINE consist of: 1. SCG vacuum feeder / loader and conveyor 2. SCM STEFANI EVOLUTION SSB 1 automatic double-sided formating and edgebending machine − clean pack L − anti adhesive unit AAR − crushing unit − automatic milling unit − EVA glue module − SLIM LINE module − NORDSON units for PU glue − end trimming unit − horizontal sawing unit − fine trimming unit − milling unit for edge rounding of solid wood − multiedge scraping unit − brushing unit Total lenght: 9750 mm 3. PANEL TURNER GP DC / BOR 4. SCM STEFANI EVOLUTION SSB 2 double-sided automatic formating and edgebending machine − clean pack L − anti adhesive unit AAR − crushing unit − automatic milling unit − EVA glue module − SLIM LINE module − NORDSON units for PU glue − end trimming unit − horizontal sawing unit − fine trimming unit − ROUND 4 unit with Zero lock − milling unit for edge rounding of solid wood Gsdpfx Aszb Eu Uji Nouc − multiedge scraping unit − brushing unit 5. BIESSE Techno Logic - automatic throughfeed drilling machine 6. SCG vacuum feeder / loader and conveyor Total lenght: cca 23 m Year of production: 2018

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, type of input current: AC, input voltage: 230 V, input current: 2 A, input frequency: 50 Hz, power: 0.48 kW (0.65 HP), For sale is a Mosca strapping machine P-5, year of manufacture 2006, suitable for bundling newspapers, magazines, or shipping cartons. The machine has seen very little use and was stored for 6 years in between. The strapping cycle is triggered manually via foot pedal. Strapping band width: 5 mm, cycle speed: 50 to 55 strapping cycles per minute, automatic band threading and strap end ejection, electronic tension adjustment via potentiometer, and a soft tension button. The machine has been fully overhauled and is in very good condition. Frame size: 600 x 500 mm. Video available on request. Inspection and test run can be arranged by appointment. Free delivery within 200 km around Vienna. We can secure and pack the machine on a pallet for transport by freight carrier or for self-collection. Gsdpfx Ajy Ew N Tji Nsuc Model: RO-M-P5 Serial Number: 87878 Power configuration: 1L~N~PE Voltage: 230 V Current type: AC Power: 0.48 kW Frequency: 50 Hz Current: 2.6 A Year of manufacture: 2007 Control voltage: V Control current type: DC If you have any questions or need more information, feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2000, Two complete blister packaging lines from the pharmaceutical industry are available. 1.1) Automatic case packer IMA CP 28 BA, year of manufacture: 2000, min. carton dimensions X/Y/Z: 220mm/120mm/120mm, max. carton dimensions X/Y/Z: 600mm/400mm/350mm, output: 8cartons/min, machine dimensions X/Y/Z: approx. 4900mm/1900mm/2650mm, weight: approx. 1500kg. 1.2) Bundle wrapping machine IMA BFB MS 300 A with stretch banding, year of manufacture: 2005, bundle length range: 20mm-360mm, bundle width range: 55mm-220mm, bundle height range: 55mm-220mm, output: approx. 40bundles/min, max. film roll diameter: 300mm, machine dimensions X/Y/Z: approx. 2900mm/1300mm/1950mm, weight: approx. 1500kg. 1.3) Mini robot. Overall line dimensions X/Y/Z: 10750mm/2350mm/2250mm, transport weight 1/2: approx. 4700kg/5000kg, total weight: approx. 10000kg. Without shrink tunnel. 2.1) Blister packaging line IMA Giant 1 BH 100 A, year of manufacture: 2006, products: tablets/capsules, design: modular, max. packaging output: approx. 350blisters/min, max. blister dimensions X/Y/Z: 90mm/145mm/12mm, max. carton dimensions X/Y/Z: 100mm/155mm/105mm. Line dimensions X/Y/Z: approx. 7100mm/1300mm/2250mm. Documentation available. An on-site inspection is possible. A package sale is preferred. Expected to be available from October 2026. Guodpfx Aisy I Acqo Noc

Condition: ready for operation (used), Year of construction: 2013, Circular Metal Saw manufactured in 2013. This PRESSTA EISELE Profilma 400 V features a saw blade diameter of Ø400 mm and a powerful motor with approximately 12 kW. It offers automatic material feeding and a pneumatic clamping system for efficient operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE Profilma 400 V machine we have for sale. Contact us for further details regarding this machine. • Design: Integrated material feed/loading magazine; floating feed to compensate for profile deviations • Power supply: 400 V / 50 Hz • Materials: Aluminum and non-ferrous metal profiles • Saw blade diameter: Ø400 mm • Saw blade speed: adjustable approx. 3,500–5,800 rpm Gujdpfxeyyxxfo Ai Nec • Saw movement drive: Servo motor with ball screw drive • Sawing direction: Linear feed from top to bottom • Cutting principle: Crosscut • Material feed: Automatic servo feed with repeat strokes for longer cutting lengths • Material separation: Before the saw blade retracts (no recutting) • Clamping system: Pneumatic, vertical and horizontal, on both sides of the saw blade; clamping force separately adjustable; replaceable plastic/PVC pads • Control: PLC-based; operation via control panel with display • Functions: Profile database; piece counter (incl. bundle cutting); cycle time display; diagnostics and error messages; machine status indicator • Saw blade lubrication: Minimum quantity lubrication (spray mist), programmable lubrication control • Extraction connections: Ø100 mm and Ø160 mm • Pre-installation: Prepared for external chip extraction • Motor Power: up to 22 kW (multi-speed motor: 3.5 / 11.5 / 18.5 / 22 kW) Additional equipment • External chip extraction unit (to connect to Ø100/Ø160 mm ports)

Condition: used, Year of construction: 2010, functionality: fully functional, type of input current: three-phase, cutting length (max.): 12,000 mm, cutting width (max.): 640 mm, saw drive: 15,000 W, input voltage: 400 V, wheel diameter: 600 mm, – Year of manufacture: 2010 TECHNICAL SPECIFICATIONS: – Motor: 15 kW Cutting dimensions: – max. log diameter: 95 cm – clearance between rollers: 73 cm – max. cutting width (square timber): 64 cm – max. cutting height above saw blade: 39 cm – max. cutting length: 12 m Saw head equipment: Gujdpfx Aisy Na Hvj Nec – automatic cutting thickness adjustment device – electric head height adjustment: up/down – electric forward/reverse head feed: infinitely variable feed speed – electric saw blade guide arm – hydraulic sawblade tension system with air cushion – debarking unit Sawblade: – length: 4670 mm – width: 38 mm - 50 mm – sawblade guide wheels diameter: 600 mm – belt type: Z – material: cast iron The sawmill is equipped with full hydraulics: – hydraulic leveling system – side stops – material clamp – comb-type log turner – 3 loading arms Machine dimensions: – length: 1520 cm – width: 235 cm – height: 240 cm

Condition: used, Year of construction: 1987, Technical details: number of spindles: 8 spindle passage: 51 mm Article: multi spindle automatic lathe Manufacturer: Schütte Type: AF51 Yob: 1987 eight main spindles max. bar diameter D=51mm control SIEMENS SIMATIC S5 pick up in pos. 7, for rear machining Guodpfxoiay Sfe Ai Njc thread cutting drive independent feed in positions 2/3 electronical trip dog control “Balluff” clear text display Wöhrle coolant pump magnetic cartridge filter oil running incl. bar loader IEMCA PRA 40/37/F, yob 1987, (bundle type) Painting in light blue and light grey The configuration of tooling will be different like pictures. Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 2011, Printing & Processing Units: - 5 x EXL offset printing units (single) - 1 x Flexo printing unit (single) - 1 x EC printing unit on rail - 7 x UV drying stations (GEW HCP) - Corona S-unit - Die-cutting and laminating nip - Laminating unit – unwind / rewind Web Handling - Combination unwind / infeed unit S-1000 - Web cleaning unit (TEKNEK, single) - Web turner unit with backside reading - Combination outfeed / rewind unit S-1000 - Edge trimmer / crush cut unit Guodpfxjy Rp E Do Ai Noc Registration & Control - Single matrix unit - Double vertical die unit (SD) - Main control unit - Web video powerscope 4000 (motorized) - ELTROMAT key adjustment system Auxiliary Systems - Technotrans water dampening system - Cooling water in / out for cooling rollers (UV system) - Exhaust air connection (max. 70 °C)

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, cutting length (max.): 8,000 mm, overall weight: 13,000 kg, total length: 15,000 mm, saw band length: 9,045 mm, saw band width: 160 mm, wheel diameter: 1,250 mm, Horizontal Band Saw WRAVOR WRC 1250 AC High-performance industrial saw with 55 kW motor — for cutting logs up to diameter Ø 1250 mm Year of manufacture: 2018 General Remont: 2026 Gedpfx Aiey Rmx Io Nsuc Technical Specifications: • Main motor: 55 kW • Fixed command board on sawhead • Control: fixed control panel with Unitronics V-280 PLC • Manual adjustment of cutting thickness possible • Track length: 12.5 m • Hydraulic log clamps: 5 X • Hydraulic rollers: 5 X • Angles (90°): 5 X • Standard log turner: 4 X • Outfeed silon conveyor belt for board transport

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Very neat twin-column automatic bandsaw with NC control on the length measuring system. Capacity Ø 360 mm; max. height 360 mm; max. width 380 mm. Saw blade dimension: 4430 x 34 x 1 mm. Infinitely variable band speed from 25 to 112 m/min. Main motor 3.75 kW, total power 4.7 kW. Single feed stroke 500 mm, multiple up to max. 4500 mm. Machine equipped with chip conveyor, powered chip brush, and bundle clamping device. Godpfeyzcacsx Ai Nouc

Condition: excellent (used), Year of construction: 2016, Cutting Capacity 0° round (tube): 300 mm Cutting Capacity 0° round (solid material): 180 mm Cutting Capacity 0° rectangular horizontal (hollow section): 320 x 290 mm Cutting Capacity 0° bundle (tube): 320 x 160 mm Cutting Capacity -45° round (tube): 300 mm Cutting Capacity -45° round (solid material): 110 mm Cutting Capacity -45° rectangular horizontal (hollow section): 300 x 280 mm Cutting Capacity -60° round (tube): 200 mm Cutting Capacity -60° round (solid material): 80 mm Cutting Capacity -60° rectangular horizontal (hollow section): 190 x 200 mm Cutting Capacity +45° round (tube): 270 mm Cutting Capacity +45° round (solid material): 110 mm Cutting Capacity +45° rectangular horizontal (hollow section): 270 x 200 mm Table height, material feed: 800 mm Main motor: 2.6 kW Cutting speed, stepless: 20 - 100 m/min Saw blade size: 3660 x 27 x 0.9 mm Machine dimensions (L x W x H): approx. 1800 x 950 x 1400 mm Net weight: 585 kg Accessories / Special features: • Semi-automatic swing-frame metal band saw • After the cutting cycle is started, the vice clamps automatically – after completion, it returns to its starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for cutting stainless steel, tool steel, hollow profiles, and solid materials • Fully hydraulically controlled sawing functions • Saw drive with low-maintenance, oil-lubricated worm gear • Robust three-phase motor • Motor equipped with overload protection • Ball-bearing turntable • Saw arm inclined at 25°, resulting in longer saw blade service life • Saw arm swivels from +60° to -45° • Chip removal brush for optimal saw blade cleaning and maintenance • Frequency inverter: allows stepless adjustment of saw blade speed from 20 - 100 m/min • BRP – Saw band monitoring • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control upper and lower saw arm positions Gujdpfsxz Dqmjx Ai Noc • No need to set the upper end point • Length stop with scale, left-side removal 3 m • Cut detector • Swivelling control panel • Micro-spray device • 2 x roller conveyors: 3 m discharge left, 6 m feed right • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel