Used Book Sawing Machine for sale (67,031)

Condition: good (used), Karl Krause Hot stamping press Manufactured by Karl Krause, Germany, The machine is fully operational, after modernization of the control system. Prjdpjzz Hifsfx Akijc Extendable work table. Timer control allows the machine to be started at a specific time to ensure it is ready for operation. 380V power supply. Heating plate size: 400x530mm. Weight: approx. 800kg.

Condition: used, Gehrungs cold-cut circular saw machine MEP Type Tiger 350 CNC FE Factory No. 00011818 Year of manufacture 1995 Cutting range at 90° round: Ø 115 mm Cutting range at 90° rectangle: 180 x 95 mm Cutting range at 45° round: Ø 110 mm Cutting range at 45° rectangle: 125 x 95 mm Cutting range at 30° round: Ø 90 mm Cutting range at 30° rectangle: 90 x 95 mm Cutting range round: Ø 120 mm Rectangle: 180 x 100 mm Vise opening: max. 185 mm Saw blade diameter: 350 mm Miter cut: 60° left to 45° right Saw blade speed: 15 / 30 / 45 and 90 rpm Motor power: 1.8 and 2.6 kW Mains connection: 400 Volt, 50 Hz Compressed air requirement: 6 bar - CNC control for up to 80 different cut lengths with corresponding quantities ???? - CNC control, cut length and quantity programmable - hydro-pneumatic saw head lowering - pneumatic material clamping - pneumatic material support - jaw feed with servo drive and ball screw - feed stroke programmable up to 9999 mm - 2 gear stages and 2 motor speeds Psdpfx Aszrpl Dekisrc - coolant system in the machine stand Space requirement L x W x H: 2000 x 1100 x 2030 mm Weight: 650 kg Good condition

Condition: new, Year of construction: 2026, The CORMAK HBS260 metal bandsaw for cutting pipes, profiles and bars is widely used in locksmith and metalworking workshops where precision, quality and cutting speed are essential. The model features a pivoting arm from 0° to 60°. The frame design ensures precise and quiet operation. It has a removable chip tray for easy cleaning! Machine characteristics Predoudi Uzspfx Akisc The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Blade size [mm] 2520 x 27 x 0.9 Blade tension mechanical (manual) Blade speeds [m/min] 35, 70 Arm lowering control stepless – hydraulic cylinder Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame swivel [°] 0–60 Power supply 3-phase 400V Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Dimensions with base [cm] 150 x 80 x 140 Weight [kg] gross/net – 210 / 180 kg Additionally 2 M42 saw blades 5L Emulsol ZW580 magnetic chip collector

Condition: used, Equipment: documentation/manual, RES 420 CUTTING SAW Predpfx Akszzdt Uoioc MAXIMUM CUTTING DIAMETER: 420 MM CUTTING CAPACITY ON THE FRAME: 420 MM

Condition: used, The Trennjäger circular saw sharpening machine is suitable for sharpening small circular saw blades. It is designed for the precise resharpening of saw blades in woodworking applications. Technical data: - Saw blade diameter: max. approx. 300 mm Prsdpfozrx H Rjx Akisc

Condition: new, Year of construction: 2026, The CORMAK HBS275 band saw for cutting tubes, profiles and bars is widely used in all locksmith and metalworking workshops where precision, quality and cutting speed matter. The model is equipped with a 0-60° swivel arm; the saw guides are based on sintered carbide. The frame construction ensures accurate and quiet operation. Machine characteristics The horizontal metal band saw with swivel arm enables cutting in a plane perpendicular to the axis of the material being cut and at any angle within the range from 0 to 60°. The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The blade guides are equipped with special carbide plates and bearings. This has a major impact on blade guidance, service life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and blade. The machine is equipped with an efficient coolant pump with a closed coolant circuit. The saw arm is made of a single cast-iron casting and, together with the 27 mm wide cutting blade used in this saw, fully enables multi-series cutting of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The blade guides are equipped with hard metal plates – sintered carbide and a rolling bearing system. It is precisely the SINTERED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The arm has been inclined at an angle of 25°, which increases blade durability and improves cutting conditions. A cleaning brush is mounted at the bottom of the arm to achieve excellent cleanliness and blade operation. The machine drive is transmitted via a worm gearbox. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The shape of the upper part of the base forms a tray for draining coolant and collecting chips generated during material cutting. A cast-iron work table with a swivel arm and a control panel on a separate arm is mounted to the base. In the cutting process, the main cutting movement is the movement of the cutting blade, while the feed is the lowering of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic cylinder. The feed speed is adjusted on the saw control panel. Two cutting blade speeds are available: 37.5 and 75m/min. In the lower position of the arm (after cutting the material), the cutting blade drive is switched off automatically. Safety is ensured by cutting blade guards and micro-switches that stop the motor after the cutting cycle is completed or when any guard is opened; additional protection consists of automatic shutdown of the saw in the event of cutting blade breakage. The machine drive is transmitted by a motor with a worm gearbox. The motor with thermal fuse protects against overheating during operation. Technical data TOTAL POWER 1.5kW POWER SUPPLY 400V 50Hz ARM LOWERING ADJUSTMENT hydraulic cylinder Predpfx Aeudi Unjkiec BLADE LENGTH 2450 x 27 x 0.9 mm BLADE SPEED 37.5 / 75m/min VICE BASE HEIGHT 900 mm MACHINE DIMENSIONS (WITH ARM RAISED) (L x W x H) 1720 x 800 x 1800 mm WEIGHT 215 kg

Condition: excellent (used), Year of construction: 2004, Description to follow! Prodpfx Ajz Ebqcjkioc

Year of construction: 1979, condition: used, saw blade diameter 450/500 mm cutting diameter mm stroke mm total power requirement 3,6 kW weight of the machine ca. 1130 t dimensions of the machine ca. m Podpsilfp Nofx Akierc - Circular saw - semiautomatic - hydraulic

Condition: excellent (used), Year of construction: 2010, Control panel, suspended, swiveling, and with document holder 5.7" touchscreen control Crosscut fence with stop and digital length display Crosscut fence with length compensation Parallel parallelogram table with support roller Parallel fence can be lowered under the table in the end position Table extension Saw blade quick-change system "ProLock" Sliding table length: 3700 mm Cutting width: 850 mm Cutting width at the crosscut fence: 3400 mm Cutting height: 140 mm Saw blade diameter max.: 400 mm Saw blade speeds: 2000/4800/6000 rpm Saw blade tilt: 0 – 46° Motor power: 7.5 kW, 400 V, 50 Hz Working height: 900 mm Dust extraction connection: 80 and 120 mm Transport dimensions approx. L x W x H: 3550 x 1850 x 1620 mm Weight approx.: 1800 kg INCLUDED: Laser cutting line indicator MITREX double miter fence Note regarding used machines: Prodpfx Asxzfqbekioc • Subject to errors in technical specifications and prior sale. • Stated prices are ex-works prices, collection only - free loading! • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machine at the location. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: good (used), Year of construction: 1984, machine/vehicle number: 102335, Offer 23172 Technical data: Pedpfxormkl Aj Akierc - Saw blade diameter up to 400 mm - Cutting range with saw blade diameter 400 mm - at 90° round 130 mm - square 120 mm - flat up to 260 x 60 mm - Mitre adjustment left + right 0 - 90 ° - Cutting speed 1750 / 3500 m/min - Feed speed of the saw blade 0 - 3 m/min - Rapid return 3000 mm/min - Saw drive 400 V / 3.7 / 4.4 kW - Pneum. Material vice with adjustable clamping pressure - Space requirement approx. W 1200 x H 1900 x D 1200 mm - Weight approx. 600 kg - Outfeed roller conveyor 3000 mm - Infeed roller conveyor 3000 mm

Condition: good (used), Year of construction: 1997, functionality: fully functional, saw blade diameter: 350 mm, total length: 1,000 mm, total width: 1,150 mm, total height: 1,550 mm, cutting range round steel at 90°: 125 mm, overall weight: 620 kg, saw blade speed: 2,800 rpm, length stop: 2,000 mm, Semi automatic Aluminium circular saw, blade Ø 350 mm, capacity Ø ca. 125 mm, motor 3,7 / 4,5 kw 2-speed 1420/2880 rpm, vertical clamp, stops 30°, 45°, 60° 90° double side, blade; dimension 100x115x155 cm, weight ca. 600 kgs Podpfx Aotqfvyokierc

Condition: new, Panel saw VPS 22-51 VR ED KS Holzkraft -Exhibition machine- -----Technical data----- Cutting length: 5100 mm, Cutting height: 2200 mm, Cutting depth: 60 mm, Saw blade diameter: 250 mm, Motor: 3 kW, Dust extraction port diameter: 100 mm, Space requirement (L x W x H): 6300 x 1800 x 3200 mm - Clamping force of clamping system: 250 kg Dust extraction connection: - Dust extraction port diameter: 100 mm Prsdjwnrf Uopfx Akisc - Minimum air flow for dust extraction: 1800 m³/h - Minimum air velocity: 20 m/s Equipment: - Lower material support: metal rollers - Adjustable slat bed: automatic - Vertical dimension display: digital - Horizontal dimension display: digital - Panel clamping system - Locking of the saw carriage: pneumatic Electrical data: - Power of drive motor: 3 kW - Connection voltage: 400 V - Mains frequency: 50 Hz - New exhibition machine -

Condition: used, Year of construction: 1985, RIVO Risstaler R200 GA Saw Blade Sharpening Machine, year of manufacture 1985 Grinding wheel diameter: 200 mm Grinding wheel bore diameter: 25 mm Maximum tooth pitch: 50 mm Maximum tooth height: 25 mm Grinding angle: 0-30 degrees Pedozl N Irjpfx Akierc Maximum blade height: 190 mm Minimum blade length: 900 mm Motor power: 0.65 kW Feed motor: 0.12 kW Supply voltage: 400 V Overall dimensions: 251 x 90 x 163 cm Weight: 530 kg Immediately available - fully functional Location: Austria, near St. Pölten

Condition: as good as new (ex-display), Year of construction: 2025, Carriage length: 3200 mm Cutting width at rip fence: 1000 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 200 mm Psdpfx Asxzfw Iokisrc Scorer: no Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: manual Saw blade tilt display: Scale Cutting height display: - Rip fence display: Scale Crosscut fence display: Scale Maximum saw blade diameter: 550 mm Saw blade diameter fully retractable below table: 500 mm Motor power: 9 kW Motor brake: yes / automatic Extraction connection: 100 mm and 120 mm Machine length: 3500 mm Machine width: 2000 mm Weight: 900 kg

Condition: used, Bernardo CSM2000 circular saw-milling machine, in good condition, 3 kW, 315/30 mm, approx. 2200 mm cutting length, approx. 100 mm cutting height, approx. 500 kg Psdpfx Aksx H Ufbeisrc Prices subject to change, errors and misprints excepted.

Condition: used, Year of construction: 2000, total power requirements: 2,2length of saw band: 3200cutting area width: 3200messurements (LxWxH): 2000 x 7000 x 1400weight approx.: 1500saw band dimension: 27 x 0,9Metal Bandsaw Bauer HS320GLZA Used horizontal metal bandsaw by Bauer, model HS320GLZA, year of manufacture 2000. The machine is equipped with automatic feed and is suitable for precise cutting of metal, pipes, and profiles in industrial and workshop use. Podpfxsy Nuhne Akiorc Approx. dimensions: 200 x 700 x 140 cm.A roller conveyor system with a length of approx. [ 5000 mm] is included. The machine is used and located in our workshop. Viewing is possible on site. Location: 3071 Böheimkirchen, Neustiftgasse 34.

Condition: as good as new (ex-display), Year of construction: 2025, Carriage length: 3200 mm Cutting width at rip fence: 1000 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 200 mm Scoring unit: no Saw blade height adjustment: handwheel Saw blade tilt adjustment: handwheel Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Crosscut fence display: scale Maximum saw blade diameter: 550 mm Saw blade diameter, fully retractable under table: 500 mm Motor power: 9 kW Motor brake: yes / automatic Extraction connection: 100 mm and 120 mm Machine length: 3500 mm Machine width: 2000 mm Weight: 900 kg Pjdpfx Aowm Nrcokijrc

Condition: used, Year of construction: 2001, Technical details: Prsdpswvbk Ajfx Akioc saw blade diameter: 250/285 mm cutting diameter: 50-70 mm total power requirement: 5,5 kW weight of the machine ca.: 1 t Saw type: circular saws Cutting direction: straight cut Automation: automatic Material type: structural steels, stainless steels, tool steels Material width: 60 mm Material height: 70 mm *

Condition: used, Year of construction: 1989, saw blade diameter 320 mm Prodpew Dvivsfx Akisc cutting diameter 140 mm total power requirement 3 kW weight of the machine ca. 0,5 t

Condition: new, Year of construction: 2026, Engine power: 21 HP Splitting force: 20 tons LONCIN engine Operating pressure: 16 - 20 MPa Cylinder: Ø101.6 x 610 mm Maximum log diameter: 480 mm Maximum log length: 610 mm Cycle time: 6 - 8 s Return time: 3 s Prjdpfxoyx D Dwj Akisc Splitting wedge: 6 arms OREGON guide bar: 22" Chain: 74 links, 0.75" Saw/splitter drive: hydraulic motor/gear pump Conveyor belt: 6800 x 250 x 4 mm Tires: 13" Shipping dimensions (W x L x H): 2250 x 1000 x 1200 mm Gross weight: 790 kg Splitting force 20 tons – efficient work with larger logs. Combustion engine – independence from mains power and field operation. Hydraulic feed and pressure – stable material guidance and increased safety. Ejector angle adjustment – ​​precise control of ejected material. Hydraulic guide and lift adjustment – ​​convenient adjustment of the working position. Cutting and splitting function – one device for two key stages of wood processing. Robust construction – durable frame for intensive use. Ergonomic operation – intuitive operation and comfort of use. Universal application – suitable for field use, firewood processing, and heavier work. Wedge, 8-piece knife - price €130 (paid additionally). Wedge, 4-piece knife - price €100 (paid additionally). Hydraulic log feeder for firewood processors - price €1,150 (paid additionally).

Condition: new, Year of construction: 2025, machine/vehicle number: 6972, cutting height (max.): 155 mm, cutting width (max.): 1,100 mm, saw blade diameter: 450 mm, cutting length (max.): 3,350 mm, cutting width at rip fence: 1,100 mm, Equipment: scorer, Table dimensions: 1,030 x 680 mm Sliding carriage dimensions: 3,200 x 350 mm Cutting length with scoring unit: 3,350 mm Cutting width at parallel guide: 1,100 mm Max. cutting height with 450 mm saw blade: 90°: 155 mm with saw blade at 45°: 110 mm 3 speeds: 3,000, 3,600 & 4,200 rpm Motors: Main saw: 5.5 kW / 7.5 HP / 50 Hz, Scoring saw: 0.55 kW / 0.75 HP Dust extraction port D = 120 + 80 mm Angle stop extendable to 3,600 mm, Programmable saw blade height adjustment Programmable saw blade tilt adjustment Programmable parallel guide adjustment Motors: Main saw: 5.5 kW / 7.5 HP Scoring unit with motor: 0.55 kW / 0.75 HP Sliding carriage made of anodized aluminum incl. high-precision guide made of hardened and ground steel Sliding carriage locking in any position Saw blade guard with swing-away device Outrigger with adjustable angle stop with length compensation at Predewz Nbaopfx Akisc 10°, 15°, 22.5°, 30°, 45° and 90° Belt change for speed adjustment from above (opening in the saw table) Display for set saw blade speed Electrical system and safety devices according to CE standard as inspected, Ex Works, from location Seevetal, without pre-carriage, freight and training, subject to prior sale.

Condition: reconditioned (used), Year of construction: 1986, cutting width (max.): 800 mm, cutting length (max.): 2,800 mm, cutting width at rip fence: 800 mm, main saw diameter: 450 mm, M.-No. 86-1-224, year built 1986, connected load 380V 5.5kW, trimming carriage length 2800 mm, cutting width 800 mm, hydraulic height and tilt adjustment, scoring unit, star-delta switch, parallelogram safety device with narrow and wide hood, angle stop, mitre stop, parallel fence, table extension 800 x 400 mm Prodpfxewrb U To Akioc

Condition: new, Year of construction: 2026, Professional, very powerful and efficient band saw for metal with 45° swivel arm. The perfect solution for ironwork, production and craft workshops. Unparalleled for many years, the design and solid construction make it a perfect solution. Machine description Professional, very powerful and efficient metal band saw with 45° swivel arm, CORMAK BS 712 SW is based on refined solutions making it unrivaled in its class. Arm made of shaped spheroidal cast iron ensures rigidity during operation and absorbs all vibrations. Control panel is located on the arm of the cutter. It features high efficiency and simple handling. Provides cutting in vertical plane and in the plane perpendicular to the axis of the cut material, or at any angle in 45° – 90° range. Element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Suitable speed of arm lowering is obtained thanks to the valve controlling oil flow between hydraulic cylinder chambers. Rugged, stable and refined construction as well as the arm made of uniform cast iron provide high rigidity and stability while cutting, ensuring accuracy and long-term reliability. The design of the 20 mm saw blade used in the machine makes it possible to cut large quantities of elements. Required band linear velocity is obtained by changing the ratio on the belt pulley between the worm gear and the driving motor. Technical data Motor power 1.1 kW Band speeds 22/33/45/65 m/min Power supply 400V Band dimensions 2360×20×0.9 mm Prodow U Skvepfx Akijc Cutting range 45°L – 45°R Weight 145 kg Dimensions 1280x575x1140 mm Angle 0°.....Ø 205.....215×205.....205×205 45° L.....Ø 150.....100×200.....130×130 45° R.....Ø 140.....140×90.....90×90 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2023, machine/vehicle number: 23-04-35-001, F 25 Version 3 Manual height and swivel adjustment 0 - 46° of the saw blade with digital display. Motor 5.5 kW, 2 speeds 3,600 / 4,200 rpm. Double roller carriage 3200 mm, Parallel fence incl. fine adjustment and DIGIT X (digital display of the cutting width) Cutting width 1000 mm, Angle miter fence, cutting length up to 3450 mm, Basic scoring unit with LED light Saw blade diameter max 315 mm, saw blade projection max. 104 mm, Prjdpjf A Ehtjfx Akioc Cutting height max. 100 mm, at 45° max. 70 mm, Large dust extraction hood (PSV), incl. option for front support roller, immediately available from stock in Seevetal, subject to prior sale Ex works, excluding transport, assembly and instruction.

Condition: used, Year of construction: 2024, Used machine Year of manufacture: 2022 Commissioning: 8/2024 As-new condition The heavy-duty worktable made of highly ribbed grey cast iron and the base frame made of welded steel ensure high torsional rigidity and vibration-free operation. Smooth-running and precise sliding table made of anodised aluminium with proven, long-lasting ball contact system on hardened guides, 10-year warranty on guideway wear. Grey cast iron saw unit with permanently precise dual pivot segment guidance and zero-point tilt, 6-year Holzkraft warranty on wear of pivot segments. Equipped with a powerful three-phase motor. Saw blade tilt displayed on a scale at the unit. Large outrigger table with roller facilitates panel handling. Angle-adjustable aluminium telescopic fence with two professional folding stops. Folding parallel fence with quick-release and fine adjustment. Standard features include table extension, table widening, and eccentric clamp. Made in Italy Podpfx Akoxua N Soijrc Sliding Table and Worktable: Sliding table length: 2600 mm Sliding table width: 360 mm Sliding table height: 142 mm Worktable length: 840 mm Worktable width: 560 mm Worktable height: 900 mm Saw Unit: Cutting width with parallel fence: 900 mm Maximum crosscut width left of saw blade: 3200 mm Ripping length: 2660 mm Saw blade tilting range: 90 - 45° Maximum cutting height at 90°: 100 mm Maximum cutting height at 45°: 70 mm Note on max. cutting height: Independent of scoring unit Saw blade diameter: 315 mm Note on saw blade diameter: Independent of scoring unit Saw blade speed: 3800 rpm Motor: 5.5 kW The hose visible in the picture is not included in the scope of delivery! Availability: Short term Location: Flörsheim