Used Book Sawing Machine for sale (66,467)

Condition: excellent (used), Year of construction: 1986, Used, good condition Make: Altendorf Type F45 Year of manufacture: 1986 Machine No. 86-4-143 GS-tested Motor: 5.5 kW Carriage length: approx. 2500 mm Cutting width: approx. 800 mm Pivotable up to 45° Saw blade diameter: 450 mm Parallelogram guard Miter stop Extraction connection: D 80 and 120 mm Space required: approx. 2500 mm x 1600 mm x 1500 mm Weight: approx. 1000 kg Ksdpfx Aaowhgd Sjloww Storage location: 54634 Bitburg, Germany, free on load, unpacked Sold in the current condition as seen, without warranty or guarantee

Condition: new, Year of construction: 2025, Martin Panel Saw T 77 - New Stock Machine - Top specification - Tiltable to both sides - Equipment: T 7710/2-a Saw Unit Prex – tiltable to both sides T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless T 7730/4-a Table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled parallel fence, lowerable in end position T 7755-a 3-axis scoring unit T 7757-a Scorer illumination Safe Light T 777572-a MITRE cutting system RadioCompens with continuous support T 7780/1-a Rear table extension 610 x 860 mm T 7792/2-a Sensor monitoring for laterally adjustable protection hood 2 x 45 degrees T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case T 7706/1-a ConnectApp at operator level Classic Kwsdpfx Ajw D T Dkoalsw Location: ex stock 54634 Bitburg - available immediately -

Condition: good (used), Schmedt PraForm HHS 2100 Book Press Book press with groove cutter. Manufactured by Schmedt, Germany. Kodpfx Aeyl Rz Ioaleww Technical specifications: Maximum format: 400 x 520 x 100 mm Weight: 250 kg Power supply: 380V + compressed air.

Condition: good (used), Karl Tranklein EK-100 Corner Cutter Made in Germany. Very good condition. This is a professional, production-grade corner rounding machine. Kwjdpfxsyl Rzzj Aalow Sturdy cast iron construction and strong pressure ensure precise operation. Replaceable blades. Adjustable margins. One set of blades included. Stack height: 100mm Weight: 130kg Cycles per minute: 50 cycles/min Power supply: 400V Waste is collected in containers. This is the model currently in production.

Condition: good (used), Karl Tranklein PS1200 Bookbinding Shears Ksdpfxsyl Rzuj Aalsww Made in Germany. Very good condition. Cutting length approx. 1200 mm Ideal for bookbinding board, corrugated cardboard, leather, and canvas. Front cutting stop with millimeter scale. Two additional sliding stops on the table. Feet-operated material clamp. High knives, in very good condition. Weighs over 400 kg

Condition: good (used), 4-station bookbinding press for gluing blocks MURO 4 x 5000 A4/HAD Solid construction, waterproof board, and galvanized components. The machine is in perfect condition. Technical specifications: Format: 350x320x550 (W/D/H) Number of stations: 4 Power supply: 230V Maximum power consumption: 4kW Weight: 102kg Ksdpjyl Rznofx Aaloww High clamping force, flywheels with a comfortable grip. Electric drying with two power levels: 2 and 4kW Each press can be tilted up to 45′ The structure is mounted on wheels for easy movement.

Condition: good (used), Schmedt PraForm HHS 20 Book Press Book press with groove burner. Kwsdpfoyl Rzbjx Aalew Very good condition. The machine came from a school. Manufactured by Schmedt, Germany. Technical specifications: Maximum format: 350 x 380 x 110 mm Weight: 250 kg Power supply: 380V Flexible temperature control.

Condition: good (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 0/41938, BDM20 case maker (book cover machine), 1992 Kodpfx Aasxqd I Dolsww

Condition: used, functionality: fully functional, For sale: Bauer VG 450-600 sawing machine, specially designed for steel construction. This machine is suitable for cutting various steel profiles and structures. The Bauer VG 450-600 is renowned for its precision and reliability in steel construction. Kwsdpfx Aaox Trhmeljw

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: ADS550×5000, Power supply: 380–420 V / 50 Hz Total power: 5.5 kW Saw motors: 2 × 2.2 kW Saw blade: Ø550 mm Max. cutting length: 5000 mm Min. cutting length: 360 mm at 90° Cutting angles: 45° and 90° Repeatability: ±0.1 mm Kwedpfx Aasx R U Epslsw Air consumption: 60 L/min (0.5–0.8 MPa) Fully CNC controlled Two saw heads that can operate independently or synchronously Automatic positioning of the moving saw head via servo drive Automatic height measurement system for increased precision at 45° Touchscreen control with clear interface Integrated label printer (traceability & workflow) Infinitely adjustable saw feed Very stable and heavy machine base

Year of construction: 1992, condition: used, Vollmer Saw blade shearing machine type NS 700 Year 1992 Kwjdpfokmnyfjx Aalew

Condition: new, Year of construction: 2026, Model: Mechanical with touch panel Tooth profiles: All common tooth profiles Kjdpfxsyliids Aaljww Blade width: Band saws up to 230mm Blade thickness: 0.6 - 6.0 mm Tooth pitch: 0 - 60 mm Tooth height: 0 - 25 mm Clamping angle: 0 - 40°

Condition: new, Year of construction: 2020, machine/vehicle number: MR006644, This SVP950 is a powerful vertical panel saw. The machine is equipped with, among other features, variable speed control on the saw unit. This SVP950 is a robust vertical panel saw machine. It features variable speed control on the saw unit and is equipped with digital readouts for both horizontal and vertical cutting. The SVP950 offers a cutting depth of 80 mm and is powered by a strong 7.5 HP motor, making it suitable for processing thicker materials. It is also suitable for plastics, where a lower speed is desired. This is an ex-showroom machine directly from the manufacturer, allowing us to offer it at a competitive price with a full new-machine warranty. The machine is equipped with the following options: Ksdpfxsx S U I Hs Aaljww - Rear support wall for small workpieces - Variable speed: 2,000 – 6,000 rpm - Electronic display for horizontal measurement indication - Electronic display for vertical measurement indication - ECO extraction system: channeled extraction during vertical cutting Technical specifications: - Maximum cutting length: 5300 mm - Maximum cutting height (horizontal): 2100 mm - Maximum cutting height (vertical): 2200 mm - Maximum cutting depth: 80 mm - Maximum saw blade diameter: 300 mm - Motor power: 7.5 HP - Serial number: 20950017

Condition: like new (used), Year of construction: 2011, I sell the combined machine format sliding table saw with scoring + spindle moulder Manufacutrer: FELDER Austria Model: KF700S. Year 2011. Cutting length 3200mm. Cutting height 95mm. Saw blade and spindle moulder tilting 0-45° Saw blade and spindle moulder height adjustment digital Digital display for parallel fence and working height. Turn on the main saw blade and scoring unit from the sliding carriage. Main motor format sliding table saw 3,0 KW / (3200/4500/5800 rpm adjustable) Scoring motor format sliding table saw 0,75 KW Main motor Spindle moulder 5,5 kW Tools, Optionals, and equipment on photos included in price. Very good condition. Available immediately. Kwodpfx Aaor Alzpjljw Including full documentation and CE Certificate.

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland Kodpfx Asq Ii Dloaloww TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: new, Year of construction: 2022, machine/vehicle number: MR006645, This SVP420 is a very high-end vertical panel saw. It is a showroom machine with numerous options and an attractive price point. In addition to the standard Putsch features such as precision-ground guides, a rigid frame, and a cast aluminium saw unit, this machine offers additional extras. The machine is equipped with linear guides for the adjustment of the saw unit. It comes with an automatic adjustable stop for vertical cutting (POSI system). This unit is an ex-showroom machine from the manufacturer, allowing us to offer it at a very competitive price. High quality, with a full new-machine warranty. The machine is equipped with the following options: - Rear support wall for small workpieces Kwodex S N U Uepfx Aaljw - Additional measuring rail with stop below the length stop - Strip measuring stop - Depth adjustment - Dust collection bin for horizontal cutting - Automatic length stop POSI system Technical specifications: - Maximum cutting length: 4200 mm - Maximum cutting height (horizontal): 2080 mm - Maximum cutting height (vertical): 2200 mm - Maximum cutting depth: 60 mm - Maximum saw blade diameter: 250 mm - Saw blade speed: 5300 rpm - Motor power: 5 HP - Serial number: 22420021

Condition: good (used), machine/vehicle number: 52513/5, Hunkeler RE320VAR register punch, in good condition, immediately available. We have two more machines in stock at our warehouse. If you are interested, we would be happy to inform you about additional machines in our facility. You are welcome to inspect the machine at our premises by prior appointment. Kedpfx Aajrc Attslsww

Condition: new, Year of construction: 2026, Model: Mechanical or CNC with touch panel Circular saw with stellite or alternate set teeth Sharpening in one pass with a large amount of water!! Tooth profiles: All standard tooth profiles Kwjdpfx Aoyk H Emealew Blade diameter: Circular saw blades up to 1000 mm Blade thickness: 0.6 - 6.0 mm Tooth pitch: 0 - 60 mm Tooth height: 0 - 25 mm Clamping angle: 0 - 40°

Condition: ready for operation (used), With documentation. Kodpfsip Ul Ejx Aalsww

Year of construction: 1987, condition: not inspected (used), Sharpening machine for metal and segmental circular saws. Ksdpfjlmkpfex Aaloww Circular saw blade diameter from 80 - 710 mm. Any tooth pitch. Tooth height 1.2 - 14 mm. Working speed infinitely variable 15 - 180 teeth / min. Wet grinding device, NC controlled,

Condition: new, Panel saw HOLZ-HER 1255 SECTOR pro - Exhibition machine - Cutting height 2,200 mm Cutting length 5,300 mm Vertical perfection from HOLZ-HER The vertical panel saws from HOLZ-HER combine proven technology from over 50 years of experience and a rock-solid design that offers you a unique price-performance ratio. offer you a unique price-performance ratio. Your advantages: - Fully welded frame Extremely high rigidity - Precise cutting quality Kedpfxsu R Syie Aaljww - Finished cut for immediate edge banding - Powerful saw motor with 4 kW output - Space-saving panel layout with a installation area from 4 m² - Smooth and ergonomic operation TRK extraction system (optional in all CE countries): Workstations must meet the highest requirements when it comes to health and safety. HOLZ-HER saws are among the cleanest and safest in the safest in the world. Accessories The extensive range of accessories extends from convenient digital dimension displays through to our our patented Super Cut plus scoring system. TECHNICAL DATA Vertical panel saw for cutting panel-shaped wood materials wood-based materials such as chipboard, MDF, veneer panels, multiplex, etc, veneer panels, multiplex etc. Basic machine: Completely welded frame with extremely high rigidity. Precise guidance of the saw beam / saw unit saw unit for an accurate cut. Manual feed feed for vertical and horizontal cutting. Cutting depth: max. 60 mm Saw beam: Sturdy saw beam guided on precision guides. Pneumatic locking of the saw beam at the top and bottom. Electrically monitored in vertical cut Saw unit: Smooth and ergonomic operation for plunging and and removal of the saw unit. Immersion lever can be lever can be folded down in the upper position for precise immersion of the saw unit. Generously dimensioned lever for easy pivoting. Housing cover opens the complete opens the complete saw unit for easy tool change change incl. ProLock quick-action chuck. Light cut-out: Riving knife can be retracted. Control panel: Efficient operation of the machine. Ergonomically positioned at eye level. Lower workpiece support: Sturdy, wear-free stainless steel support. Support up to the cutting line: Narrow workpieces cannot tip or fall through Extraction: Effective extraction with two connections: Saw unit Ø 120 mm, frame end Ø 100 mm (with TRK variant) Lifting roller transport system: Manually liftable and lowerable rollers for easy and and gentle panel transport. Measuring tape: For displaying dimensions for horizontal cutting with three manual dimension displays: Absolute dimension from the lower workpiece support Absolute dimension from the middle workpiece support Serial cuts from the top edge of the panel This offer is an equipment package. The following items and options are already included in the price: - Sliding grid - Manual longitudinal stop for vertical cutting - Digital dimension display for horizontal cut - 3 adjustable stop points in the saw beam - TRK SH 2.200 suction device - Strip stop for recurring horizontal cuts - new exhibition machine -

Condition: new, ALTENDORF HAND GUARD sliding table saw Edition TwinFlex with 12" touchscreen -exhibition machine- Including: - ALTENDORF HAND GUARD sliding table saw Edition TwinFlex with 12" touchscreen Optical protection system: Two cameras collect data for hand detection from a wide area around the saw blade. As soon as hands are detected entering the area a quarter of a second, the saw unit is quickly lowered and quick stop of the saw unit within a quarter of a second. EDITION TWINFLEX - Double roller carriage 3,000 mm - Saw blade projection 150 mm - Motor power VARIO 5 kW (6.8 HP) - Tilting on both sides - DIGIT LD angle mitre fence, cutting to length up to 3,200 mm - CNC rip fence, cutting width 1,000 mm - On/off switch on the double roller carriage - Template holder Included: - Surcharge for motor power 6.5 kW (8.8 hp) ALTENDORF with VARIO, for tilting on both sides Included: - Scoring unit 2-axle, 2-sided, ALTENDORF with motorized height and side adjustment Scoring blade height programmable with quick lowering and quick raising, Drive motor 0.75 kW (1 hp), 8,200 rpm. Including: - RAPIDO 180 mm ALTENDORF scoring system for tilting on both sides Kwsdeu R S Eljpfx Aalsw Includes: - LED lighting on ALTENDORF scoring unit Included: - Double roller carriage 3,400 mm, ALTENDORF Including: - CNC parallel fence, 1,300 mm, ALTENDORF Included: - Camera arm, swiveling ALTENDORF Includes: - Front support roller ALTENDORF Width 300 mm Includes: - ALTENDORF air cushion table Includes: - Table top extension 840 mm ALTENDORF with air cushion - new exhibition machine -

Condition: new, Panel Saw ALTENDORF F 35 Type 3 - 1000 -Exhibition Machine- 5.5 kW (7.5 HP), 3 speeds, Motorized height and tilt adjustment, Large protective hood, Double roller carriage 3,200 mm, Scoring unit with LED lighting, CNC rip fence, cutting width 1,000 mm, Angle-mitre fence 3,450 mm, without length compensation, Table extension/table widening, High-quality CDF surface ----- Technical Specifications ----- Tilting range: 0 - 46°, Carriage length: 3,200 mm, Kwedpfow Imptsx Aaljw Cutting length: 3,100 mm, Cutting width: 1,000 mm, Cutting height: 154 mm, Max. saw blade Ø: 450 mm, Motor power: 5.5 kW, Screen size: 15 inch, Table height: 910 mm, Extraction port Ø: 80 + 120 mm - New exhibition machine -

Condition: new, ALTENDORF WA 6 sliding table saw - Exhibition machine - manual height adjustment, double roller carriage, scoring unit, pivoting, outrigger table, angle mitre fence, automatic brake, can be lowered below table height ----- Technical data ----- Kwjdpfx Aeu R Sx Eealew Swivel range: 0 - 45 °, Cutting length: 2,500 mm, Cutting width at rip fence: 1,000 mm, max. cutting height: 100 mm, max. saw blade Ø: 315 mm, Swivel range mitre fence: up to 49 °, speeds: 4,200 rpm Motor power main motor: 5.5 hp / 4.0 kW, Scoring motor power: 0.5 hp / 0.37 kW, Work table height: 910 mm, Extraction nozzle Ø: 1 x 100 / 50 mm each, Weight: 450 kg - new exhibition machine -

Condition: new, ALTENDORF F 25 sliding table saw, type 1 -Exhibition machine- Double roller carriage swiveling man. Height and swivel adjustment Rip fence with man. fine adjustment Angular mitre fence Large extraction hood Basic scoring unit with LED lighting ----- Technical data ----- Swivel range: 0 - 46 ° Carriage length: 3,200 mm Rip fence: 1,000 mm Kwodpfx Aju R S Dboalsw Cutting height: 100 mm Max. saw blade Ø: 315 mm Crosscut fence extendable up to: 3,450 mm Speeds: 3,600 / 4,200 rpm Motor power: 5.5 kW (7.5 hp) Work table height: 880 mm Suction nozzle Ø: 120 + 80 mm - new exhibition machine -