Used Biomass Burner for sale (727)

Condition: like new (used), Year of construction: 2019, Functionality: fully functional, pressure: 15 bar, power: 100,000 kW (135,962.00 HP), operating pressure: 15 bar, temperature: 201 °C, operating temperature: 201 °C, Price by negotiation Gelswkq Nqshcdw Njbp

Condition: used, -Fuel delivery system -Biomass combustion system -Hot water boiler -Ash removal system -Flue gases primary cleaning system -Stairs and service platforms -Draft fan - Automatic control system -Chimney -Circulation system and water treatment Main parameters and guarantee value are calculated according to fuel parameters: -Moisture 60-65 % -Ash till 8 % - Calorific value 7990 kJ/kg and 1907 kcal/kg Main parameters of the furnace 6000 K: - Maximal designed thermal output – 6.5 Mw - Maximum continuous rate – 6 MW - Furnace regulation range 20% - 100% - Volume of furnace- 31.6 m3 Gslhewfpwpscdw Nobp - Volume of combustion chamber – 24m3 - Grates area 12 m2 - Grates designed thermal load – 500 Kw/m2 - Combustion chamber designed thermal load – 250 Kw/m3 - Maximum temperature in the combustion chamber - 900°C The following kinds of biomass are accepted for combustion in the furnace: - wood chips – 100% - forest wood residues- 100% - saw dust – 100% (G15) - chunk peat – 100% - bark – 100%

Condition: used, Lenght: 1,56 m Width: 1,56 m Height: 2,4 m Dust/gas burner. Completely new. Wood powder: - Fuel effect, max - 31,6 MW Gbolhcehc Riasdw Nep - Fuel effect, min - 20% - Wood powder flow, max - 6580 Nm3/h - Wood powder flow, min - 1320 Nm3/h - Fuel density max. - 250 kg/m3 - Fuel density min. - 180 kg/m3 - Dosing screw speed, max - 85 rpm - Dosing screw speed, min - 12 rpm - Dosing screw frequency, max - 88 Hz - Dosing screw frequency, min - 12 Hz

Condition: new, Year of construction: 2025, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Gbelhcdsq Igyvow Nep Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: good (used), Flame cutting machine, torch, oxy-fuel cutting machine, cutting torch, welding torch, hand cutting torch, welding set -Manufacturer: Auka Rhöna, burner set in a tin box -Burner sizes: 2-4 / 4-6 / 6-9 mm -Cutting torch: -Accessories: see pictures Gbjlhcdwswya Iho Nsp -Dimensions case: 450/190/H55 mm -Weight: 2.9 kg

Condition: excellent (used), -Serial no.: 5748994 -Year: 2001 -Model: GME97 -Slab size: 750x2222 mm Golhcdewxx Iwsw Nebp -2 electrical connections -6 gas connections -Number of decks: 4 -With loading elevator -Voltage: 400 V -Power: 15.10 kW -Weight: 5,200 kg -Refurbished equipment: The equipment is prepared upon order; pick-up and return times are agreed at that moment (please request the price after refurbishment)

Condition: new, Year of construction: 2023, Functionality: fully functional, We are selling a new Weishaupt dual-fuel burner -mu Type WM-GL20/4-A with digital combustion manager WFM This unit was purchased as a backup but has never been used and is still in its original packaging. Version ZM-R-3LN (SuperLowNOx) Performance range (Natural Gas) 300 - 2450 kW Performance range (Heating Oil EL) 350 - 2450 kW Fully automatic operation for both oil and gas, either sliding/two-stage or modulating depending on the type of output control. Modulation range on the gas side up to 1:8 possible. Modulation range on the oil side up to 1:5 possible. Designed for burning EL heating oil according to DIN 51603 and natural gas as per DIN DVGW specifications, with the following components: - Burner housing - Blower with three-phase motor - Integrated speed control module for connection to a frequency converter (included) - Combustion air regulation with actuator - Fuel system consisting of a high-pressure gear pump with pressure control valve, solenoid valves as quick shut-off devices, nozzle assembly, and nozzle Gjlhcsww Taxjdw Nsbp - Magnetic coupling for deactivating the oil pump during gas operation - Mixing device consisting of burner head and diffuser plate, continuously adjustable for optimal combustion results - Ignition system consisting of: high-voltage ignition transformer, ignition cable with plug connection, and ignition electrodes - Combustion manager for controlling all burner functions and power adjustment via electronic compound control - Suitable for continuous operation in accordance with TRD 411 and 412 - Flame monitoring by UV cell Digital Combustion Management: With the combustion managers W-FM 100 and W-FM 200*, operation of a combustion system becomes more convenient and secure. All key functions, such as fuel and air supply or flame monitoring, are recorded and controlled with digital precision. The aim is to optimize operating processes, maximize efficiency, and minimize emissions. Thanks to digital combustion management, such optimization can now be achieved with limited effort. Installation and maintenance are even significantly easier than with conventional technology. For example, a separate control panel for burner management is no longer necessary. Additionally, remote control, remote diagnostics, and external monitoring of the system are possible. This further increases safety and convenience for the operator.

Condition: ready for operation (used), Aschenbrenner 20-143 13" Monitor 183, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Gbelsi D T Abjhcdw Nop

Condition: used, Year of construction: 2018, Functionality: fully functional, heating capacity: 675 kW (917.74 HP), Complete biomass heating system based on wood pellets Brand wood pellet boilers: KWB Type: Pelletfire Plus MF2S135 (135 kW) Number: 5 (cascade setup) Control: KWB control with online remote control Power range: 40 - 675 kW Year of construction: 2018 Thermal efficiency: 93% Filters: Yes, electrostatic filters are mounted in all flue ducts to collect fine dust Setup: 2 containers on top of each other The installation is complete and custom-made as a "stand-alone", so that the containers are on top of each other. The lower container contains the 5 biomass boilers with the control technology and the upper container contains the bulk stock for the wood pellets. A fuel compartment with a removal system and drop tube has been mounted per boiler. Golsv Uz Efohcdw Nsbp The installation is very well maintained and only certified wood pellets with the EN plus A1 quality mark have been used as fuel. The heating installation is currently stored in a preserved state. If you are seriously interested, the installation can be visited by appointment at the storage location near Rotterdam. Transport and commissioning in consultation. The steelwork that can be seen on the outside photo is not part of the installation. The biomass installation is suitable for, among other things: apartment complexes, apartment buildings with block heating, public swimming pools, large utility buildings, horticulture

Condition: excellent (used), Year of construction: 2011, 1. WEISHAUPT WM-G10/3-A (with gas train) - Output: 125-900 kW - Year of manufacture: 2011 - Version: ZM-LN 2. WEISHAUPT WM-G10/3-A (with gas train), as new - Output: 125-900 kW Golhowgyp Eecdw Njbp - Year of manufacture: 2018 - Version: ZM

Condition: good (used), Flame cutting machine, torch, oxy-fuel cutting machine, cutting torch, welding torch, hand cutting torch, welding set -Zinser: Burner set in a metal box -Burner sizes: No. 1 to No. 5 (max. 9 mm) -Accessories: see pictures -Dimensions case: 480/230/H90 mm Gbolhcdofwx Uvow Njp -Weight: 6 kg

Condition: excellent (used), - Dimensions: 2050x2800x2400 mm - Electric oven - 6 openings - 3 decks - With integrated loader/elevator - Baking surface: 6 m² - Power: 43 kW Goljwxmrdohcdw Nebp - Voltage: 400 V Refurbished equipment: the equipment is prepared upon order, with agreed pick-up and return times. Please request pricing after revision.

Condition: ready for operation (used), Year of construction: 1990, A Weishaupt dual-fuel burner is available. Fuel: gas/fuel oil, gas type: N, category: I, set pressure min./max.: 30bar/180bar, heat output: 850kW-8550kW, oil throughput: 150kg-720kg/h, fuel oil: EL, engine output: 14kW, machine dimensions X/Y/Z: approx. 2100mm/1400mm/900mm. On-site inspection is possible. Gbslhcswwlkvedw Nsp

Year of construction: 2003, Condition: good (used), Weishaupt gas burner Monarch Burner type G7/1-D Golhcjmdpczedw Nsbp Version ZMD Power 300 - 1750 KW Including gas line ( gas fitting ) Burner was recently in operation

Condition: excellent (used), Year of construction: 2010, power: 600 kW (815.77 HP), 1 burnt Weishaupt oil burner ----- Type : WM-L20 / 2-A Version : R Nox class : 2 Output : 600 - 2.100 kW Gbelhcjuugwcsdw Nsp Oil throughput : 50 - 176 kg/h Year of construction : 2010 with WFM 100

Condition: like new (used), Year of construction: 2016, For sale are fully functional dual-fuel burners/oil burners/gas burners of the following types: 1. Brand: Weishaupt WM-GL10/2-A, as new condition Version: ZM-T Year of manufacture: 2016 Output: 75-630 kW 14-53 kg/h 2. Dual-fuel burner/oil burner/gas burner, brand ELCO KLÖCKNER - burner type: EK 6.200 (1710 kW), with oil pump, incl. Dungs DN 50 gas train. Year of manufacture: 2012 ELCO KLÖCKNER - Burner type: EK 6.200 GL - Output: 279-1710 kW - Output: 50 - 163 kg/h - Inlet pressure: 15-300 mbar - Version: EU - With oil pump Delivery possible upon request All technical data can be seen in the pictures. Gbeljhitrxohcdw Nep Preferred sale to dealers, businesses or for export. All information is provided without guarantee. Subject to errors and prior sale. The seller accepts no liability for typing or data transmission errors.

Condition: good (used), Flame cutting machine, torch, oxy-fuel cutting machine, cutting torch, welding torch, hand cutting torch, welding set -Manufacturer: Zinser, Burner set in a metal box -Burner sizes: No. 00 to No. 4 (max. 9 mm) -Cutting torch: A -Accessories: see pictures Gbslhown D Rpscdw Nsp -Dimensions case: 320/200/H65 mm -Weight: 2.8 kg

Year of construction: 2011, Condition: repair required (used), Functionality: unexamined, For sale: GRANPAL S 015 Furnace Serial No.: 015, Furnace output: 4 MW, Number of partitions: 3, Max operating temperature: 1050 °C, Total weight of complete boiler: approx. 24 t, Transport weight of boiler: approx. 12 t (main element) Year of manufacture: 2011 Golhewxaazecdw Nebp The furnace has been unused for an extended period and requires refurbishment. The unit has been dismantled and prepared for transport. The refractory lining has been removed and is about 90-95% packed and secured on pallets. Price of the furnace in current condition: 50,000 Euro. Refurbishment of the furnace according to manufacturer’s technology is possible. Refurbishment costs depend on the scope of work and may range from 20,000 to 70,000 Euro. Together with the furnace, a biomass feeder and cyclone (shown in the photos) are included in the sale. The furnace can be inspected in: Sępólno Krajeńskie, Kujawsko-Pomorskie, Poland.

Year of construction: 2005, Condition: excellent (used), engine power 55 kW Gbjlhcjlx Ndlodw Nep sieve diameter 6 mm rotor width 450 mm

Condition: ready for operation (used), Year of construction: 2015, Functionality: fully functional, The Spanner plant consists of the cogenerator and the reformer. The reformer, the heart of the wood chip system, produces natural wood gas from wood chips through a controlled process. This gas is used to operate the cogenerator. The generated thermal energy can be used to heat buildings, drying plants or district heating networks, while the electricity is fed into the grid. Model: HK45 Gslhewvhf Tscdw Nebp Electrical performance: 45 kW Thermal performance: 120 kW Wood chip consumption: 45 kg/h Requirements for wood chips: Grain size G30-G40 Maximum moisture 15% Fine dust (

Condition: excellent (used), Year of construction: 1992, 1 burnt Weishaupt oil burner ----- Gsleu Thf Rjhcdw Nobp Type : RMS 9 Version : ZMD Capacity : 80 - 265 kg/h 88 - 310 kg/h Year of construction : 1992

Condition: excellent (used), Year of construction: 2002, WEISHAUPT G7/1-D, gas burner with gas train. -Power: 250-1550 kW Gbjlhcdjwgykcsw Nep -Version: ZD-LN -Year of manufacture: 2002

Condition: excellent (used), Weishaupt dual fuel burner RGL70,oil+gas,power 10500kw Gslhcdopir Unew Njbp

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, 1 fired Weishaupt gas burner ----- Type : G70 / 2-A Version : ZM-NR NoX-Cl. : 2 Output : 1.000 - 10.500 kW Gas type : N Gas pressure : 15 - 500 mbar Gbslhsunkrdocdw Njp CE mark : CE0085 Year of construction : 2007 with gas control line, with WFM 200

Condition: excellent (used), Year of construction: 2009, WEISHAUPT WM-L20/1-A (top condition) - Output: 400–1400 kW - 34–118 kg/h - Year of manufacture: 2009 Gsljwgyifehcdw Nebp - Version: T