Used Tb Sprint 303 for sale (3,605)

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 303 CS 2816, total width: 2,000 mm, total length: 8,000 mm, total height: 2,000 mm, Equipment: compressor, Collating Machine Theisen & Bonitz tb sprint 303 CS – 8 Stations – with Stitching Unit – Year of Manufacture 1999 For sale is a Theisen & Bonitz tb sprint 303 CS collating machine featuring 8 collating stations and an integrated stitching unit. This machine is ideally suited for producing brochures, booklets, catalogues, and multi-page print products, and is a proven solution for print shops and finishing operations. The robust construction of the tb Sprint series ensures reliable and long-lasting performance. Thanks to its compact design and user-friendly operation, the machine is suitable for smaller production lines as well as for integration into existing setups. Technical Data Crjdpfx Aceyucwge Tog Manufacturer: Theisen & Bonitz Model: tb sprint 303 CS Year of Manufacture: 1999 Machine No.: 303 CS 2816 Number of Stations: 8 Equipment: integrated stitching unit Application: brochure and booklet production Condition Used, commensurate with age. Scope of Delivery Machine as described and shown in the photos. Inspection / Availability Inspection possible by appointment. Immediately available – subject to prior sale.

Condition: used, Year of construction: 2000, Gathering machine / booklet making Theisen & Bonitz TB Sprint 314 flex HP with QSM 303 14 stations, manual feeder TB Sprint flex 314 HP Crodpfjzictpjx Ac Tsg Format (max.): 350 × 500 mm Stack height: up to 650 mm Performance: - Up to 3,300 cycles/hour in 1:1 operation - Up to 4,200 cycles/hour in 1:2 operation TB B303 QSM Stitch-fold-cutting unit Formats open max.: 35 x 50 cm Open formats min.: 6.5 x 15.5 cm Smallest brochure: 6.5 cm spine length x 4 cm with head-foot trimming: 10.5 cm spine length x 4 cm largest brochure: 35 cm spine length x 25 cm with head-foot trimming: 34.6 cm spine length x 4 cm Output: up to 3100 work cycles/h, depending on format and paper Front cutting device with upper/lower blade for cutting to 4 cm and sections larger than 1.5 cm, infinitely variable motorized format adjustment of the front cut with additional handwheel for fine adjustment, head and foot trimming of 3 - 20 mm each for approx. 120 pages of standard 80 g/m² paper

Condition: used, Year of construction: 2002, Gathering machine / booklet making Theisen & Bonitz TB ECO A 308 FP + TB Sprint QSM 303 8 stations, manual feeder TB ECO 308 FP Performance: up to approx. 3,100 cycles per hour Cedezicw Uspfx Ac Tsrg Maximum book block thickness: 50 mm Stack height per station: 50 mm (5 cm) Paper and format range Maximum sheet size: 310 × 430 mm Minimum sheet size: 105 × 148 mm (DIN A6) Paper weight: 20 to 1,000 g/m² TB B304 QSM Stitch-fold-cutting unit Formats open max.: 35 x 50 cm Open formats min.: 6.5 x 15.5 cm Smallest brochure: 6.5 cm spine length x 4 cm with head-foot trimming: 10.5 cm spine length x 4 cm largest brochure: 35 cm spine length x 25 cm with head-foot trimming: 34.6 cm spine length x 4 cm Output: up to 3100 work cycles/h, depending on format and paper Front cutting device with upper/lower blade for cutting to 4 cm and sections larger than 1.5 cm, infinitely variable motorized format adjustment of the front cut with additional handwheel for fine adjustment, head and foot trimming of 3 - 20 mm each for approx. 120 pages of standard 80 g/m² paper

Condition: ready for operation (used), Year of construction: 2003, 7-station Theisen & Bonitz gatherer tb sprint B307 VP, equipped with: – 7 stations collator / gatherer – stack height up to 30 cm – height control – double sheet control – missing sheet control – including jogging table for solo-gathering / collating Theisen & Bonitz tb sprint 303 QSM stitch- fold- and trimming unit QSM quick set semi automatic size setting version Equipped with 2 Hohner 43/6 stitching heads and delivery belt Technical details Min. open format 6,5 x 15,5 cm Max. open format 35 x 50 cm Max. format booklet 25 x 35 cm Codpexnb Hfefx Ac Terg Max. format booklet 6,5 x 6,5 Paper weight 18 – 1.000 gsm Max. stitching heads 6 Max. speed 3.300/h for solo gathering – 3.100/h inline with 303 (depending on paper and format)

Condition: ready for operation (used), Year of construction: 2008, Theisen & Bonitz tb sprint 310 VP / 304 QSM / 503 stitch- fold- trimming unit 304 QSM 2 stitching head Hohner Universal 48/5 front cut Crjdpfx Acjxnb Age Tog stream delivery TB 503 - 2008 - Theisen & Bonitz tb sprint 503 form punching, multiple ups inline with Theisen & Bonitz tb 303 or tb 304, or offline Delivery time: immediately from stock

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, stack height: 30 mm, paper weight (max.): 1,000 g/m², product length (min.): 500 mm, product width (max.): 350 mm, Equipment: CE marking, No reserve price - guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the equipment by 17/10/2025. As these are floor-level machines, extraction is straightforward. The offer includes one tb sprint B 312 VP and one tb sprint 304 QSM! Both machines were fully overhauled in 2023. --- tb sprint B 312 VP TECHNICAL DETAILS - Stations: 12 - Variable stack height: up to 30 cm - Formats: max. 35 x 50 cm, min. 6.5 x 10 cm - Paper weights: 18 to 1,000 g/m² - Throughput: up to 3,200 cycles/h MACHINE DETAILS - Electrical - Voltage: 3/N/PE 400V - Frequency: 50 Hz - EQUIPMENT - CE marking - Jogger bridge as a removable transfer to connecting machine - Manual feed station left - Lateral air blast - Individually adjustable single suction and blow nozzles - Controlled air separation and blast - Photocell sheet miss-feed detection per station - Electromechanical double-sheet detection at the delivery (motorized adjustment) - Overlapping shingle conveyor for transverse transport - Paper jam detection for transport table - Table illumination - Manual feed station right - Delivery jogger for standard or offset stack, selectable via switch - Total and pre-set counters - Digital speed display in cycles/h, infinitely adjustable --- tb sprint 304 QSM TECHNICAL DETAILS - Formats: max. 35 x 50 cm, min. 6.5 x 15.5 cm - Smallest booklet: 6.5 cm spine length x 6.5 cm - Throughput: up to 3,100 cycles/h (format and paper dependent) Stapling - Stitching heads: 2 slim heads for standard stapling up to 5 mm (Hohner Universal) - Fold-down boxes: complete with fold-down boxes and wire spools - Automatic stapling thickness adjustment - Block stapling: up to maximum format - Cross adjustment: of the staples relative to the fold Folding - Fold system: frictionless knife fold with automatic thickness adjustment and re-pressing for approx. 120 sheets of standard 80 g/m² paper - Channel punch-out: single for block stapling Trimming - Front trim: upper and lower knives incl. air blast for trims to 6.5 cm and offcuts greater than 1.5 cm - Format adjustment: stepless for front trim - Head and foot trim: 3–20 mm each for approx. 80 sheets of standard 80 g/m² paper - Knives: upper and lower - Waste paper box: included - Continuous operation: same formats as 303 QSM Delivery - Shingle conveyor: shortened version with double-sided motorised feed and continuously adjustable shingle spacing Crodpfx Ajxb Dbxec Tjg - Delivery angle: format-adjustable for booklets and block stapling MACHINE DETAILS - Electrical - Voltage: 3/N/PE 400V - Frequency: 50 Hz - Machine Configuration - Version: Quick Set motorised (QSM) - Feed rollers: with upper belt transport system - Vacuum belt: included - Motorised format changeover: included - Fine adjustment: two handwheels (independent for head and foot) - Size readout: two digital counters, 0.1 mm increments - Motorised alignment: to collating machine

Condition: ready for operation (used), Theisen & Bonitz 303 stitching unit Codpfx Aey Sip Ejc Tsrg Booklet Maker / Brochure Finishing Equipped with 2 Hohner stitching heads and delivery belt. 9-station high-pile collating machine Complete with 1 pump Max format: 350 x 50 cm

Condition: used, Year of construction: 1995, offer consists of: Theisen & Bonitz booklet maker tb sprint 315 VP - collating unit type 315 VP (15 stations) Credszh D Irspfx Ac Tjg 1.? ?Demonstration video showing all 15 compartments. 2.? ??DIN-A6 size supported. (Shown here, for example, in compartment 1) 3.? ??Missing-sheet detection works. 4.? ??Double-sheet detection works. 5. Speed adjustment works. So it’s fully functional!! - Automatic arrival and departure of the stations - Individual suction and blowing nozzles, individually adjustable - Controlled blowing and separation air - Missing sheet control at every station - Missing sheet repetition - Electromechanical double sheet control on the delivery - Totalizer and area code counter - Shed sliding table for cross transport - Paper jam control via transport table - Transport table lighting - Digital speed display - Electrical connection - Vacuum connection for 303/304 QSM and 345 N - Display shaker for normal and folded displays - Pressure-vacuum pumps in a soundproof housing We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: good (used), Year of construction: 2007, functionality: unexamined, machine/vehicle number: 2601-0324, The Sprint 42 Linear from DMG Gildemeister is a CNC turning/milling center with 6 linear axes and 2 C-axes. Direct drives enable high acceleration and precise machining operations. It is suitable for demanding series production of parts with a bar diameter of up to 42 mm. Year: 2007 Spindles: Main and counter-spindle, each up to 6,500 rpm; bar passage through main spindle 42 mm, counter-spindle 38 mm. Tool capacity: 26 stations, including up to 11 driven tools; turret with Y-axis for milling and threading operations. Axes / Travels: Slide 1: X1 = 65 mm, Z1 = 350 mm, Y1 = 120 mm Slide 2: X2 = 326 mm, Z2 = 320 mm, Y2 = 265 mm Rapid traverse rates: up to 30 m/min (X1, Z1, X2, Z2), Y2 up to 18 m/min Control system: FANUC 160i-TB with 15" DMG SlimLine panel Including IEMCA Boss 545-E bar feeder The IEMCA Boss 545-E bar feeder (Type 32 LL, year of manufacture 2007) is included in the scope of supply and enables the continuous feeding of material up to Ø 42 mm. It operates with 400 V / 50 Hz and requires 6 bar of air pressure; its own weight is approximately 860 kg. Codpfxezkgqzo Ac Tjrg Main spindle newly bearing: The main spindle has already been overhauled (new bearing). Inspection & Collection: An on-site inspection is possible. If you are interested or have questions about technical details, please do not hesitate to contact us.

Year of construction: 1995, condition: used, functionality: fully functional, GETECHA RS 303‑A 60.11 plastic shredder, granulator 11 kW Credjyf E N Tepfx Ac Teg GETECHA RS 303‑A 60.11 type central plastic shredder, granulator with built-in exhaust fan. Manufacturer: GETECHA Type: RS 303‑A 60.11 Date of manufacture: 1995.12 Rotor cutting circle diameter: 340 mm​ Cutting width: 300 mm​ Number of rotating knives: 3 pcs Number of fixed knives: 2 pcs​ Cutting chamber opening: 300x440 mm Main motor power: 11 kW​ Speed: cca 300-400 1/min​ Screen opening (standard): 6–8 mm, round​ Average capacity: 200–360 kg/h Feeding height: 1750 mm Overall dimensions (WxLxH): 1500x2000x2170 mm Built-in exhaust fan: Manufacturer: Elektror Karl W. Müller GmbH & Co. Voltage: 230/400 V, 50 Hz, three-phase.​ Power: 3.1 kW​ Speed: 2830 rpm Volume flow: 2760 m³/h

Condition: used, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, Holz-Her Edgebanding Machine SPRINT 1329 Multi with motorized pressure beam PUR & EVA adhesive (up to 60mm) with the NEW GLU JET GJ725 PUR PRO including vacuum pump motorized infeed guide rail guide for narrow parts edge trimming IntelliSet - tool correction fa.s.t. - setup in the gap + remaining length display of the edge band roll iTronic - pressure & adhesive quantity control automatic chain lubrication second workpiece discharge + air cushion table in the infeed area fully motorized equipment for all units multifunction milling - radius 1.3mm (2x) & 2mm (2x) + nesting package, vertical, bottom spraying devices + padding unit with texture finish for normal applications and structured surfaces and more The machine is currently being refurbished at the factory in Voitsberg / Austria. Completion: approximately October / November 2026 Delivery, installation and training for the machine can be arranged directly through us for an additional fee. The machine is currently located in our delivery warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign language version, only the German version shall be binding. Our terms and conditions can be found on our website at holzher.de/de/agb. Csdpezx Ennsfx Ac Torg

Condition: excellent (used), Year of construction: 2012, Ubert RT 303 Rotisserie Grill – Stand-alone or with Mobile Base Available immediately – includes 3 grilling baskets We offer multiple Ubert RT 403 rotisserie grills, both as stand-alone units and with mobile bases. All machines come from the food retail sector, have always been meticulously maintained, and receive annual professional servicing. ✔️ Ideally suited for supermarkets, poulterers, butcher shops, and the hospitality industry. ✔️ Robust German quality from Ubert – the market leader in grill technology. ✔️ Supplied with 3 original grilling baskets included. ✅ Technical Specifications – Ubert RT 303 Capacity: up to 24 chickens per batch Number of spits/baskets: 3 Power: approx. 5.0 kW (electric, 3N~400 V) Weight: approx. 85 kg (without base) External dimensions (stand-alone): W 885 × D 545 × H 770 mm External dimensions with mobile base: W 885 × D 545 × H 1540 mm Heating: electric, quartz radiant elements Construction: stainless steel, low-maintenance design Productivity: approx. 20–25 chickens per hour, depending on size and marinade Cedpfx Aexbrl Sec Tjrg 💡 Key Benefits Flexible use: can be deployed as a compact countertop grill or with a mobile base. Fast and efficient: even roasting thanks to powerful quartz elements. Hygienic & durable: stainless steel build, easy to clean. Reliable: machines have always been professionally maintained with annual service. #rotisserie #ubert #ubertRT403 #grill #rotisserieoven #cateringappliances #horecaequipment #foodretail #supermarketfixtures #butchershop #poulterer #commercialkitchen #professionalappliances #foodservice #usedappliances #wellmaintained #stainlesssteelappliances #warmingunit #grilloven #kitchenequipment

Condition: used, functionality: fully functional, turning diameter over cross slide: 660 mm, spindle bore: 105 mm, turning diameter: 910 mm, turning diameter over bed slide: 813 mm, turning diameter over top slide: 535 mm, turning length: 2,500 mm, spindle speed (max.): 643 rpm, spindle speed (min.): 16 rpm, Binns & Berry TB 909 Double Gap Bed Lathe Model: TB 808 Swing Over Bed: 808mm (32”) Swing Over Top Slide: 535mm (21.4”) Distance Between Centers: 2500mm (100”) Spindle Speeds: 16.6 – 643 RPM Credpfx Ajzlhtasc Tjg Spindle Bore: 105mm (4.2”) Machine With: 4 Jaw Chuck 3 Jaw Chuck Fixed Steady 2 Axis Digital Readout Rapid Traverse To Saddle

Condition: excellent (used), Year of construction: 2004, operating hours: 19,176 h, functionality: fully functional, machine/vehicle number: 2301-0160, Gildemeister Sprint 32 linear, serial number 2301-0160, year 2004. 2 x 4 = 8-axis configuration + rotary table + tool magazine. 8,000 RPM on both spindles. Codpfxozxntas Ac Tsrg Operating hours: 19,176 / 15,274.

Condition: good (used), Year of construction: 2016, operating hours: 23,500 h, machine/vehicle number: 8107000021B, spindle bore: 32 mm, spindle speed (max.): 8,500 rpm, overall weight: 4,300 kg, total length: 7,500 mm, total height: 2,500 mm, total width: 1,600 mm, number of spindles: 2, Equipment: documentation/manual, DMG MORI GILDEMEISTER SPRINT 32/5 – Short/Long Turning Center Well-maintained machine, low operating hours, including IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016, as well as a conversion kit to a long turning center (Swisstype kit) for short and long turning on one machine. Delivery terms: Free loading onto truck Credszxhdljpfx Ac Tog Location: 58332 Schwelm Availability: Immediately - by arrangement Net price: On request Payment terms: Prepayment - by bank transfer Technical data: Control system: FANUC 32i MB Recorded operating hours: 25,263 Recorded spindle hours: 22,772 MAIN SPINDLE DATA: Max. turning diameter: 32 mm (guide tube bore: 38 mm) Z1 stroke: 100 mm Max. speed: 8,500 RPM Drive power S1: 5.5 kW COUNTER SPINDLE DATA: Max. turning diameter: 32 mm (guide tube bore: 38 mm) Z2 stroke: 200 mm Max. speed: 8,500 RPM Drive power S1: 2.2 kW AXIS DATA X1: Travel: 70 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² AXIS DATA Y1: Travel: 405 mm Max. speed: 30 m/min Max. acceleration: 5 m/s² AXIS DATA X2: Travel: 300 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² TOOL HOLDER DATA – SLIDE 1: Tool holder diameter: 25 mm Number of fixed tools for external machining: 6 Tool holder interface: 16 × 16 mm Number of driven tools: 4 Collet type: ESX20 TOOL HOLDER DATA – SLIDE 2: Number of fixed tools for internal machining: 4 Tool holder diameter: 25 mm Scope of supply: IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016 Chip conveyor Existing manuals Accessories as shown in the pictures Dimensions & Weights: Installation dimensions L x W x H approx.: 7500 x 1600 x 2500 mm Weight approx.: 4300 kg Attention: Disc damaged! If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ► If desired, we can offer transport to the destination. ► The quoted price is net plus VAT. ► The goods are sold with exclusion of any warranty. ► Technical data without guarantee. ► Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: good (used), Year of construction: 2008, functionality: limited functionality, machine/vehicle number: 8086010539B, spindle motor power: 5,500 W, spindle speed (max.): 6,500 rpm, spindle bore: 46 mm, type of input current: three-phase, bar passage: 42 mm, bar diameter (max.): 42 mm, overall weight: 4,700 kg, DMG Gildemeister Sprint 42 linear CNC turning center with FANUC 160i control and IEMCA Boss 545-E bar feeder. The machine is a compact and productive CNC twin-spindle turning center for the series production of bar stock parts up to 42 mm in diameter. Thanks to its main spindle, counter-spindle, 6 linear axes, 2 channels, and powered tools, the machine is particularly suitable for precise turning, drilling, milling, and complete machining operations in medium to high volumes. The machine is available including the bar feeder and chip conveyor. On-site inspection is possible by arrangement. Machine data: Manufacturer: DMG / Gildemeister Italiana Model: Sprint 42 linear Machine No.: 8086010539B Year of manufacture: 2008 Control: FANUC 160i User interface: DMG SlimLine / TFT 15" Spindles / C-axes: 2 Number of axes: 6 Number of channels: 2 Max. bar diameter: 42 mm Main spindle max. speed: 6,500 rpm Counter spindle max. speed: 6,500 rpm Installed power: 40 kVA Operating voltage: 400 V / 50 Hz Base machine weight: approx. 4,700 kg Travel distances: X1: 65 mm Y1: 350 mm Z1: 120 mm X2: 265 mm Y2: 326 mm Z2: 320 mm Spindle data: Main spindle: Max. bar diameter: 42 mm Guide bushing bore: 46 mm Max. speed: 6,500 rpm Nominal power: 5.5 kW Nominal torque: 37.5 Nm Crodpfx Acszkh Iuj Tog Counter spindle: Guide bushing bore: 38 mm Max. speed: 6,500 rpm Nominal power: 3.7 kW Nominal torque: 19.6 Nm Bar feeder: Manufacturer: IEMCA Model: Boss 545-E Type: 32 LL Year of manufacture: 2007 Serial No.: 020722GA10 Weight: approx. 860 kg Voltage: 400 V / 50 Hz Compressed air: 6 bar Weight: 860 kg Location: Bocholt Availability: immediately available Inspection: possible by arrangement Loading / Transport: for collection

Condition: used, Year of construction: 2004, functionality: fully functional, HOLZ-HER Sprint 1321-2 STUF Edge Banding Machine For sale: a high-quality HOLZ-HER Sprint 1321-2 STUF edge banding machine, which is part of a production facility for manufacturing panel furniture. The machine is located in Labin (Istria, Croatia). Price: €5,500.00 If you are interested in purchasing the entire production facility, please contact us – we will be happy to discuss a serious offer. In addition to the edge banding machine, the facility also includes: Crsdpfjzp Uzrox Ac Tog HOLZ-HER Eco Master 7120 CNC machining center HOLZ-HER 6110 CUT 70 panel saw Lazzari UNO 3000i circular saw Polymac profile edge banding machine Polymac ABS edge strip processing machine Busellato shaper Table-mounted router for grooving Overhead router

Condition: used, Year of construction: 2014, machine/vehicle number: 95480257, functionality: fully functional, power: 31.6 kW (42.96 HP), input voltage: 400 V, input frequency: 60 Hz, travel distance X-axis: 4,870 mm, travel distance Y-axis: 1,840 mm, travel distance Z-axis: 250 mm, workpiece length (max.): 4,200 mm, number of axes: 4, total height: 2,350 mm, total length: 7,500 mm, total width: 3,800 mm, overall weight: 5,000 kg, We offer this used UNITEAM SPRINT 6U/40M continuous flow machining center, manufactured in 2014. Model: SPRINT 6U/40M Serial number: 95480257 Year of manufacture: 2014 Rated voltage: 400 V Frequency: 50/60 Hz Installed power: 31.6 kW If you have any questions or require further information, please do not hesitate to send us a message or call us. Codpfx Acszhb Ive Tjrg

Condition: good (used), Year of construction: 1997, - Control system: SIEMENS SINUMERIK 840-C - Max. bar diameter: 65 mm - C-axis - Main spindle speed: 31 - 6,300 rpm - Turret 1: 8 stations, 4 of which are powered - Turret 2: 8 stations, 4 of which are powered - Driven tool speed: 4,000 rpm - Both turrets with internal cooling Crodpozxhmasfx Ac Tog - High-pressure unit - Chip conveyor - Bar feeder IRCO SiMag 65 - Max. bar length: 3,200 mm Dimensions LxWxH: - Machine: 3,400 x 1,700 x 1,800 mm - Bar feeder: 4,000 x 1,000 x 1,400 mm - Chip conveyor: 3,000 x 1,100 x 1,600 mm Total weight: approx. 6,000 kg

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Condition: Good (the machine has undergone extensive maintenance every year, most recently in March 2026!) Equipment: - iTronic – Adaptive pressure and glue quantity control with automatic, program-dependent fine adjustment - MOT SPS adjustable infeed fence - Automatic chain lubrication: Intelligent automatic transport chain lubrication - Edge Control 19 control system - EL GRM variable, 400V 50Hz, 2.2kW V2 SPRINT 1329 PERFORMANCE 400V 50Hz - Edge Control 19 control system with 18.5" touchscreen color display, 16:9 format - ECO MODE energy-saving mode: An automatic standby circuit - Jointing unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for jointing panel edges - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Edge feed 1901 SYNCHRO: automatic transport of coil and strip material Crodpfx Aezpzy Ioc Teg - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) - DW501 SPS motorized SPRINT - GM501 spray device after the printing unit with lubricant (recommended for high-gloss edges) - End trimming unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically tiltable 0/10° - Milling unit FR701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Air Stream System multi-cutter, diamond Ø 70.9 x 16 mm, Z = 2+2 - Form milling unit FF701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, left-hand rotation with CM technology - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, right-hand rotation with CM technology - Scraper unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the tracing rollers - HW reversible knives for scraper holder, R = 2.0 mm (2 pcs. required) - Flat scraper FK701 with pre- and post-sensing for removing adhesive residue - TR501 spray unit for infeed and outfeed (separating and cleaning agent) - Includes nesting shoes below with their own spray unit Location: Hesse Availability: Approx. July 2026

Condition: used, Year of construction: 2011, machine/vehicle number: 268S24, Max. bar diameter: 32 mm, max. machining length: 250 mm, with FANUC Series 160i-TB control, conveyor belt, chip conveyor, left-hand bar loader FMB Turbo 3-36, serial number: 51-261463/876667, year of manufacture: 2011, filter and cooling unit, high-pressure system COMBILOOP, without tools. Codpfx Ajzqy T Nsc Tjrg

Condition: used, Year of construction: 2011, machine/vehicle number: 265S24, Max. bar diameter: 32 mm, max. machining length: 250 mm, with FANUC Series 160i-TB control, conveyor belt, chip conveyor, left-hand bar feeder FMB Turbo 3-36, serial number: 50-2614661/867593, year of manufacture: 2010, filter and cooling unit, high-pressure system COMBILOOP, without tools. Credjzqy Uaspfx Ac Tjg

Condition: used, Year of construction: 2018, Used machine Used edge banding machine from Holz-Her, model Sprint 1329 Performance, with Return system from Barbaric, type RTS 01 Edge banding machine: Year of manufacture: 2018 Motorized roller bridge 1329 PERFORMANCE iTronic - Adaptive pressure and glue quantity control, automatic fine adjustment depending on the program Infeed fence, standard B20 mm Infeed fence for precise feeding of the workpiece Edge Control 19 control system with 18.5" touchscreen color display 16:9 Jointing cutter unit 1802 (2 x 2.0 kW, 200 Hz, 12000 min-1) with 2 cutter units for jointing the edge of the panel (1x forward rotation, 1 x reverse rotation) Edge feeder 1901 SYNCHRO, automatic transport of coil and strip material Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) Pressure unit 1913, motorized, 1 roller driven, 2 follower rollers Spray device (release agent) after the pressure unit with 2 spray nozzles for coverage up to 60mm working height Trimming unit 1918 (60 mm), pneumatic (2 x 0.45 kW, 12000 min-1), pneumatically swiveling 0/10° Cutter unit FR701, 100% repeat accuracy at the push of a button thanks to play-free mechanics Shaping cutter unit FF701, 100% repeat accuracy at the push of a button thanks to play-free mechanics Scraping unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the feeler rollers Surface scraping blade FK701 with pre- and post-sensing for removing glue residue Motorized adjustment of the infeed fence for precise feeding of the workpiece to the jointing cutter unit Automatic chain lubrication / intelligent automatic transport chain lubrication GLU JET collection container Spray device 1856 for the infeed and outfeed area: Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 min-1) For final polishing and edge polishing. With 2 textile discs, swivel range 0 - 5° RETURN system connection (emergency stop interlocking) Connection of a workpiece return system to the control system from HOLZ-HER Machine dimensions approx. 5600 x 1010 x 1900 mm Machine weight approx. 2100 kg Return system: Year of manufacture: 2018 Machine number: 2180122-206 Further details can be found in the PDF Availability: by arrangement Location: Röllbach Crodpfx Acjzt Twto Teg

Condition: used, machine/vehicle number: 008665, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, PUR, Cartridges Premilling Unit: yes Corner Rounding Unit: yes Cedszvwn Uepfx Ac Terg Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: like new (used), Year of construction: 2015, functionality: fully functional, mandrel diameter: 76 mm, product width (max.): 1,600 mm, Eruomac rewinder / slitter TB 6.10M Year of construction 2015 Unwinding Roll width 1600 mm Roll diameter 400 - 1200 mm Equipped with web edge control Rewind Roll width 1600 mm Codetyxu Eopfx Ac Torg Roll diameter 350 - 1000 mm