hole punhing press: pressure 55,0 t
output 30 in 16 mm
round bar steel 45,0 mm
square edge steel 42,0 mm
L-beam 140 x 13 mm
throat 0 mm
flat steel 350 x 13 mm
Vzbw8q87
stroke Stanze 0 - 70 mm
oil volume 90,0 l
total power requirement 5,0 kW
weight 1530 kg
range L-W-H 1240 x 750 x 1660 mm
Furnishing:
- hydraulic profile steel shears
- Punch station with support table and hold-down device
- Infinitely variable stroke adjustment with inching / setting mode
- release station
- Rod, profile and an...
pressure capacity max. 100 t
sheet width 760 mm
Fwz3vsf
plate length 1.000 mm
weight of the machine ca. 3,6 t
Magnetic Drilling Machine, Magnetic Drilling Machine
core drilling machine, metal core drilling machine
DR. BENDER Type EK 323
machine no. 180543 year of construction approx. 1988
drilling capacity 23 mm
spindle mounting MK 2
spindle speed 160 / 400 / 1250 rpm.
magnet 215 x 105 mm
drilling unit 220 Volt, 50 Hz, 1025 Watt
E-magnet 220 Volt, 50 Hz, 65 Watt
- Spindle speed via 3 gear stages
- left and right rotation
- E-magnet KOCH, type KL32/6
G7td2lx
- drill head height adjustment guided in a lin...
burnt sectional steel shear as base model type MUBEA with power for
10 mm sheet steel,flat steel 100x11 mm, blade length 175 mm,
angle steel 80x8 mm,mitre 45 degrees 50x6 mm, T-STEEL 60x7 mm,
bar steel round 28 m and square 25 mm, square notcher for
plates up to 7 mm as well as 55x6 mm, punching tool 30 mm round in 5 mm,
stroke rate 36/min. on platform 440 kg, PRESENTABLE ! Furthermore pictures drilling + deburring units, galvanized bottom trap door approx. 850x850 mm !
Bt708zeos9
Here it con...
round bar steel 45 mm
square edge steel 42 mm
L-beam 140 x 13 mm
flat steel 350 x 20 mm
pressure 550 kN
throat 305 mm
notching: rectangle tool mm
total power requirement 5,5 kW
weight of the machine ca. 1260 kg
dimensions of the machine ca. 1360 x 750 x 1565 mm
Hjpc2jp
2 working cylinder with 2 separated electric foot switch for 2-people-handling
New notching table, new knife for the rectangle notcher and new punching table included
For further information please see brochure.
pressure . t
E2kk9s2xw
punching cross-cut in cmm .
stroke . mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
hole punhing press: pressure 55,0 t
output 30 in 16 mm
round bar steel 45,0 mm
square edge steel 42,0 mm
L-beam 140 x 13 mm
throat 0 mm
flat steel 350 x 13 mm
stroke Stanze 0 - 70 mm
oil volume 90,0 l
total power requirement 5,0 kW
weight 1530 kg
range L-W-H 1240 x 750 x 1660 mm
Furnishing:
- hydraulic profile steel shears
- Punch station with support table and hold-down device
- Infinitely variable stroke adjustment with inching / setting mode
- release station
- Rod, profile and angle steel...
workpiece thickness - max.: 80 mm
workpiece thickness min.: 5 mm
plate size without being adjusted: 2000x1000 mm
size of plate min.: 100x100 mm
control: CNC Mubea Matic100
hole diameter: min/max:10/40 mm
workpiece weight: 750 kg
deburring device max.: d=40 mm
traversing speed: 80 m/min
work height max.: 1050 mm
positioning accuracy: +/- 0,5 mm
opening of gripping pliers min/max.: Typ I: 5/45 mm
opening of gripping pliers min/max.: Typ II: 45/85 mm
feed length: max. 150 mm
rapid traverse: 8 m...
4-fold combined hydraulic profile steel shear and hole punching machine MUBEA - MUHR u. BENDER MIW 400
machine No. Year of construction 1991
Punching machine:
Punching force 40 ton.
Punching capacity Ø 30 in 10 mm sheet metal
Ø 20 in 15 mm sheet metal
throat 175 mm
Flat steel shear with 2,5° cutting angle
blade length 150 mm
cutting capacity 150 x 10 mm
Jcwsm8gei
working height 770 mm
Steel bar shear:
round steel Ø 30 mm
square steel 28 x 28 mm
Sectional steel shear:
Shearing capaci...
400V
max. coil width: 600mm
diameter mandrel: 80mm
L x W x H: 1700 x 600 x 800 mm
weight: 170kg
Extensions have been welded to the reel, these can be dismantled without great effort.
The machine is electrically and mechanically tested before sale and receives a DIN VDE 0113 test certificate.
The MMV Group offers you especially for our products the suitable financing.
Calculate now with MMVfinrate easily online your monthly rate.
On request you will receive your personal financing offer and com...
ALB-02 Combo 160 / YIKE-15 UL
Bending machine with double-sided cutting system for aluminium and stainless steel strips with thickness 0,3-1,0 mm and maximum height 160 mm. This model is also used for iron and zinc strips. HD - 02 HYBRID 160 also bends DFT, TGP, RCP, SUPER LETTERS profiles (according to the manufacturer).
Dvjqzyj
Sectional steel shears Muhr & Bender
Type BF 30-12
YEAR 1977
380 Volt
3,4 ampere
with hole punch diameter 15 in 10 mm
rectangular notcher 8 x 55 x4
Triangular notcher 8 x 55
Sheet metal shears 10 mm
other possibilities and performance, see performance plates
long stop 1000 mm
electrical stroke release via foot switch
width 800 mm
depth 450 mm
height 1600 mm
Btrai2kv38
weight 517 kg
pressure 35,0 t
punching cross-cut in cmm 28,0 in 10,0 mm
stroke 72 p./min mm
throat 203 mm
stroke - stepless adjustable 24 mm
punching cross-cut in cmm 23,0 in 12,0 mm
total power requirement 1,5 kW
weight of the machine ca. 330 kg.
range L-W-H 750 x 350 x 1500 mm
Bvl0xwlfjo
** from a maintenance workshop
** very good condition (!!)
Furnishing:
- electric punch with rotary wedge coupling
- Smooth grain search device
- punching device
- die base
- underframe
- Connection cable with 16a plug
...
Punching capacity: 600 kN
cutting capacity : t
control:
cutting capacity : 1800 kN
control: Mubea Matic 100
flat material: max: 200 x 15 mm
flat material: min: 40 x 5 mm
angle max.: 150 x 15 und 200 x 100 x 14 mm
angle min.: 40 x 5 mm
total power requirement: ca. 46 kW
space requirement approx.:: 30,0 x 5,0 x 3,0 m
weight of the machine ca.: t
Plant consists of:
1. shearing unit
2. positioning unit
Beikfcf23e
3. flat punching unit
4. drilling unit
5. web and flat steel punching unit
6. signing...
Muhr u. Bender shearing machine.
Year of construction 1992
Capacity;
Corner 90 °. 80x9 mm
Angle 45 °. 65x7 mm
T 80x9 mm
T 45gr. 65x7 mm
You cannot be clearly read
H not clearly legible
Square 35 mm
Bq0hfacgkp
Around 35 mm
Flat 125x13 mm
Sizes and weights;
L x W x H 1100 x 500 x 1400 mm
Estimated weight; more than 1500 kg
The machine is in excellent condition
and is equipped with sharp blades
In short, a perfect machine for many years to come
easy to work with.
Price N, O, T, K
Transport possible...
Flat steel scissors 45N / mm²: flat steel: 350 x 20 mm
230 x 20 mm
Shear: L steel 90°: 140 mm x 13 mm
L steel 45° 70 x 7 mm
Rod shear: round steel: 45 mm
Vrxkpy
Square steel: 42 mm
Notchers: Square
Hole punch ø: up to 40 in 16 mm
Pressure capacity: 550 kN
RADIUS: 305 mm
Rated power: 5.5 kW
2 working cylinder with 2 separate electric foot switches for 2-man operation
Dimensions (L x W x H): approx. 1360 x 750 x 1565 mm
Weight: 1260 kg
Mubea (Muhr and Bender) profile combined shear offered.
Type: KBL 11 N
Capacity: 45 T
Cunn8xey
Weight: ca 1250 KG
Machine height: 190 cm
For more information call us or send an e-mail.
Punching force 50 t Hole punch, holes 30 in 15 mm projection 410 mm Bar steel shears Round steel / square 35 / 32 mm Section steel shears Shear cross section max. 3000 mm²L-steel 90°110 x 10 mm L-steel 45°65 x 8 mm flat steel shears 400 x 15 mm notching device rectangular tool strength/width/depth12 / 40 / 70 mm number of strokes 24/47 / min motor power 7,5 KW dimensions L x W x H 1610 x 750 x 1840 mm weight 1750 kg accessories / special features:-Stepless stroke adjustment and jog mode for shea...
pressure 75,0 t
punching cross-cut in cmm 30 in 22 mm
Bwzvsvcwhl
stroke 50 mm
round bar steel 50,0 mm
L-beam 150 x 13 mm
square edge steel 45,0 mm
throat 320 mm
flat steel 450 x 15 mm
weight 2400 kg
range L-W-H 1500 x 800 x 1700 mm
Furnishing:
- hydraulic, combined profile steel shears
* with release station
* with punching station
* Flat steel shears
* Angle steel scissors
- 1x support table hole punching station
- 1x support table notching station
- various tools (punches + dies)
- 2x foot ...
A used punch is sold. For the year of manufacture is unfortunately no information available. The machine is fully functional and has lots of punches and dies. The tool cabinet is not included in the offer, only the tools themselves.
Burbukibbp
Hydr. Flat, profile and bar steel shears with notching device and hole punch Offer number: 15229Factory: MUHR BENDERTyp: KBLH 700Machine no.: 01562869552445 Year of construction: 1986Technical data:-two separate working cylinders, - it can be worked at two working stations simultaneously - flat steel shears - knife length 520mm - for flat material 500x 18mm profile steel shears - L- steel at 90° 130x 12mm at 45° 90x 10mm - T-steel at 90° 180mm bar steel shears - round steel 65mm - square steel 6...
Max. pressing force: 550kN.
C7ctpg20
Min.-max. wire dia. 6 to 14mm (.236″ to .551″)
Flying shear
(5) indexing rotary arbors
(4) pre-feed rolls
80 to 120 mts/min
Max. cutoff lgth: 15 meter track
Indexing wire/rod collector
30kW (40HP) AC motor
Hydraulick motor: 15 kW (20HP)
Operators control panel; 380V- 50 cycle – 3ph
PLC Control SIMENES S 5
3 vertical payoff units
Completely refurbished machine
Trq2tvs7
15
Addison DB120 Tube Bender, Maximum outside diameter : 120mm, Maximum wall thickness : 8.5mm, Maximum material spec : 45N/m2, Tooling : 101.60mm OD x 101.60mm CLR – bend die / Wiper die,101.60mm OD x 127.00mm CLR – Bend die / Clamp / Pressure die / Mandrel / Wiper die,101.60mm OD x 152.40mm CLR – Bend die / Clamp / Wiper die,101.60mm OD x 152.40mm CLR – Bend die ,114.30mm OD x 190.00mm CLR – Bend die / Pressure die / Mandrel / Wiper die. The machine will also come will the collets to hold the tub...
Exhibition model - used for testing purposes only. Project canceled
Profile roller bender bending machine
Model: CNC
Manufacturer: BPR curvatrici srl
Type: BA35
Year of construction: 2017
Ddnpnhv
Capacity: 60x1.5mm / 40x40x2mm / 60x30x3mm / 50x30x2
Including several sets of rollers
I - beam section - flat steel 140 x 140 x 13 mm
I-beam section - upend 120 x 120 x 13 mm
L-beam 130 x 130 x 12 mm
round bar steel 85 mm
bending capacity - flat iron 125 25 mm
flat steel 65 x 65 mm
Pcn9v
including various rollers
L-beam 40 x 5 (d 500) mm
I - beam section - flat steel 80 x 15 (d 700) mm
I-beam section - upend 50 x 10 (d 800) mm
round material 30,0 (d 700) mm
bar material dia. max. 60 x 2 (d 1200) mm
square material 50 x 30 x 3 mm
Beoakdlsll
range L-W-H 670 x 530 x 1350 mm
weight 185 kg
total power requirement 0,75 kW
I-beam section - flat steel 220 bei Dm 1200 mm
I-beam section - upend - mm
angular steel - leg outwards 110x110x14 bei Dm 1000 mm
angular steel - leg inwards 80x80x10 bei Dm 1000 mm
flat steel flat 100 x 20 bei Dm 1000 mm
T-steel / side out 120x120x13 bei Dm 1200 mm
U-iron on the x-axis 22 bei Dm 1200 mm
pipes 102 x 6 bei Dm 900 mm
round material 75 bei Dm 700 mm
square material 60 x 60 bei Dm 600 mm
bending speed 3,5 m/min
No. - Rolls 3
Drive 7,5 kW
shaft diameter 125/135 mm
weight 6,4 t
dimen...
Bending capacity
Bvoj7px7le
St37 ø 42 x 2 mm
Al/Cu ø 48 mm
Short description
Automatic bending axis electronically controlled (CNC)
Memory for programs
The tube positioning and tube rotation are manually adjusted
Ideal for tubes having normal geometric forms
Ideal for small or large production amounts
for shift production
Free form protruding bending head
Left and right bending
Machine manual
pneumatic universal Plate Bender Machine STROBBE 220
Serial-No. 220157 - Year -
Eoarkwhq8
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately-
-Can be inspect-
-On Stock Emskirchen / Nürnberg - Ca
Can be seen running ,comes with some tooling.price plus vat
Bvqfwzuudy
angle steel/side length -- mm
double T-iron on the x-axis -- mm
U-iron on the x-axis -- mm
shaft diameter 40 mm
roll diameter 150 mm
Revolution 14 min.
delivery channels 72 mm
Co08ch8r
connected load 400/50 v/Hz
total power requirement 1,5 kW
weight of the machine ca. 0,34 t
dimensions of the machine ca. 800 x 870 x 1350 mm
The PB 40-3 is a profile bending machine with manual adjustment of the top roller using a handwheel.
All of our profile bending machines can be used in vertical and horiz...
I - beam section - flat steel 80 x 20 (d 1200) mm
I-beam section - upend 80 x 25 (d 2100) mm
L-beam 50 x 50 x 6 (d 1000) mm
bar material - diameter 40,0 (d 800) mm
Beoakm3x9m
square material 60x60x3 ( d 4000 ) mm
rectangle 80x30x3 ( d 6000 ) mm
roll surface width 177x60 (18x5 Nut) mm
tool adaptor 60 mm
range L-W-H 940 x 1260 x 1390 mm
turning speeds 6,4 m/min.
bar material dia. max. 70 x 2 (d 1600) mm
total power requirement 4,75 kW
weight 1080 kg
range L-W-H 950 x 1400 x 1450 mm
Furnishing:...
I - beam section - flat steel 300 x 50 / 1000 mm
I-beam section - upend 150 x 40 / 1500 mm
L-beam 160 x 160 x 19 / 2500 mm
roll diameter bis 500 mm
double T-iron on the x-axis 1360/1800 mm
U-iron on the x-axis U 400 mm
min. dia. 2300 mm
65 x 10 mm
min. dia. 2000 mm
angular steel - leg inwards 140 x 15 mm
min. dia. 1500 mm
93 x 93 x / 1000 mm
roll speed 4,5 x 9 m/min.
0 400 mm
shaft diameter 120/230 mm
total power requirement 22 kW
weight of the machine ca. 13 t
range L-W-H 3 x 2,3 x 2,75 m
...
Meier A88
sheet width - max. 88 mm
sheet thickness - max. 10 mm
C9okuitau
weight 1 t
Case Bender Tränklein BDAM
Year 1995 - Serial- No. 009
Working width max. 500mm
undercarriage
En9euf2ui
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately-
-Can be inspect-
-On Stock Emsk
Rolling width: 2.000mm
Rolling thickness 3x toproll Ø:10mm
Rolling thickness 5x toproll Ø:13mm
Rolling thickness prebending: 8mm
Top Roll Ø: 230mm
Bottom Roll Ø: 230mm
Side roll Ø: 195mm
Number of rolls: 4
Rolling speed: 5m/min
Adjustiment lower roll: 100mm/min.
Adjustment side rolls: 150mm/min.
Number of driven rolls: 2
Power: 6kW
Length: 2.800 mm
Width: 2.200 mm
Jqta09jb
Height: 1.700 mm
Weight: 7.500 kg
Please Note: The information...
I - beam section - flat steel 80 x 15 (d600) mm
I-beam section - upend 60 x 10 (d800) mm
L-beam 45 x 5 (d600) mm
bar material - diameter 35,0 (d700) mm
tube diameter 60 x 2,0 (d1000) mm
square material 45x45x3,0 mm
total power requirement 2,25 kW
Ytyzk
weight of the machine ca. 0,5 t
dimensions of the machine ca. 780 x 950 x 1450 mm
mit höhere Drehzahl: 6,6 m/min
I - beam section - flat steel 80 x 16 (d 1200) mm
I-beam section - upend 50 x 15 (d 1000) mm
L-beam 50 x 5 (d 1200) mm
round material 40,0 (d 800) mm
bar material dia. max. 70 x 2,0 (d 1600 ) mm
square material 80x30x3 (d 4000) mm
channels - flange UNP 80 (d 800 ) mm
bending speed 4,4 m/min
roll diam. toproll 157 mm
Bf2jl3ta
bore 50,0 mm
total power requirement 1,1 kW
weight 485 kg
Furnishing:
- Lower roller adjustment, hydraulic
both lower rollers can be adjusted
- Machine base
- horizontal...
Offer 21291
Technical data:
- Bending capacity tube at 45 kg / mm² up to Ø 60 x 4 mm
- solid material up to 45 mm
- bending angle 0 - 180 °
- largest average bending radius Rm 171 mm
- smallest inner bending radius Ri 10 mm
- drive 400 V / 4,0 kW
- space requirement approx. W 400 x H 950 x D 700 mm
- weight approx. 140 kg
Cnz2wokc
- with - bending angle programming 10 programs
- with 9 bending angles each
- Digital bending angle display + bending angle fine adjustment
- E.- foot switch
-...
Folding bench bending machine with cutouts in cheeks, with the possibility to finish bending window sills on three sides.
Cutouts from 6 cm up and 6 cm down. This modern press brake has a lot of space inside and a narrow 15 mm bending beam.
The offered bending machine Red 2700 / 1.0 is an alternative to the segment bending machine for less complex work.
We get this possibility thanks to the construction with special cutouts.
This machine performs bending operations from the top up and down.
The...
pressure: 22stroke: 200table diamension: 625 x 1.100total power requirements: 2,2weight approx.: 0,635messurements (LxWxH): 1,100x0,630x0,925
Nhhob
Rolling width: 3.000mm
Rolling thickness 3x toproll Ø:22mm
Rolling thickness 5x toproll Ø:30mm
Rolling thickness prebending: 20mm
Top Roll Ø: 420mm
Bottom Roll Ø: 400mm
Side roll Ø: 300mm
W8qfiea
Number of rolls: 4
Rolling speed: 0 - 4 m/min
Adjustiment lower roll: 200mm/min.
Adjustment side rolls: 200mm/min.
Number of driven rolls: 2
Power: 22kW
Length: 6.000 mm
Width: 2.800 mm
Height: 2.800 mm
Weight: 22.000 kg
Please Note: The info...
I - beam section - flat steel 80 x 15 mm
I-beam section - upend 50 x 10 mm
L-beam 40 x 5 mm
round material 30,0 (d700) mm
tube diameter 60 x 2 (d1200) mm
square material 50 x 30 x 3 mm
total power requirement 0,75 kW
weight of the machine ca. 185 kg
dimensions of the machine ca. 670 x 530 x 1350 mm
- l-steel flat 80x15 (d700) mm
- L-steel upright 50x10 (d800) mm
- Angle steel 40x5 (d500) mm
Bu3bhjni7h
- Round material 30.0 (d700) mm
- Solid material Ø 35.0 (d700) mm
- Pipe diameter max. 60x2....
I - beam section - flat steel 120 x 15 (d 750) mm
I-beam section - upend 60 x 10 (d 800) mm
L-beam 50 x 5 (d 1200) mm
round material 35,0 (d 800) mm
bar material dia. max. 70 x 2 (d 1200) mm
square material 50 x 40 x 3 mm
Nlodn
bending speed 4,3 m/min
roll diam. toproll 155 mm
bore 50,0 mm
total power requirement 1,5 kW
weight 320 kg
range L-W-H 730 x 830 x 1350 mm