Used Bearing for sale (2,931)

Condition: good (used), Year of construction: 2013, Ref. -No.: 10636 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC-Steuerung Control: Heidenhain 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1400 RPM Gbodpfs Ahkx Isx Aikjw Spindle Speed: 2000 RPM Table size: 1800 x 2200 mm Further information: - The control system was converted to a HEIDENHAIN 530i in 2013. - All drives were upgraded to digital. Thrust bearing replacement on the tower also renewed in 2013. - Accessories: - 3D probe - Heidenhain, large spindle support - 1x Heidenhain axis module (completely overhauled), - 1 new axis module is installed in the machine. - Newly packaged spare parts, covers from the machine. - All bearings have been replaced on the machine in recent years. - Tools and milling cutter heads are available. The machine is first-hand. The machine is still powered up and in production. The machine can be viewed by appointment.

Condition: used, sheet width 3000 mm plate thickness 6 mm pre-bending 4 roll diameter 205 mm total power requirement 5 kW weight of the machine ca. 3,7 t dimensions of the machine ca. 4,0 x 1,4 x 1, 5 m Roundo 3-roll plate bending machine, featuring: Gjdpfx Ais Ahkinokjbw - Hydraulic drop-end bearing and remote control - Conical bending attachment: a device for rolling cones and funnels.

Condition: good (used), Year of construction: 1998, Ref. -No.: 10583 Manufacturer: MTE Type: BF 4200 Year of construction: 1998 Type of control: CNC-Steuerung Control: Heidenhain TNC 426 Storage location: Halberstadt Country of origin: Germany X-Travel: 4000 mm Y-Travel: 1200 mm Z-Travel: 1500 mm Turning Speeds: 2.500 RPM Rapid Traverse X/Y/Z: 400 m / min Table surface area (LxW): 4200 x 1000 mm Tool changer: 40 Gedpo Ahkwisfx Aikobw Table load max.: 13.000 kg Tool Taper: SK 50 Weight: 20 t Number Of T-Slots: 7 Pcs Width of the T-slots: 22 mm Distance between the grooves: 140 mm Further information: - Heidenhain HR410 handwheel - 3D scanner, infrared - The ball screw on axes Z and Y runs clamped and supported on combined radial/axial roller bearings and radial ball bearings with 250 N/sqm stiffness. The machine can be viewed while powered up.

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Fully refurbished OPS Ingersoll Gantry 500 Wire EDM machine – in top condition, both technically and visually. The machine has undergone a comprehensive and professional overhaul in our workshop and is in very good condition, both technically and visually. During the overhaul, the machine was disassembled by over 70%. All relevant wear parts were carefully inspected and replaced if necessary, including ball bearings and drive spindles. Subsequently, a complete geometric survey, alignment, and additional check were performed using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine is also in very good visual condition. The generator and control unit were cleaned and technically inspected. The generator's air conditioning unit was also cleaned to ensure reliable cooling and stable operation. Finally, the machine was subjected to an extensive erosion test in accordance with the quality and testing specifications of OPS Ingersoll. The machine is ready for immediate use and is ideally suited for reliable production operations. Technical data: Ingersoll (OPS Ingersoll) Wire EDM machine OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture 2014 Control system EAGLE Powertec PC/NC 3060 MultiProg Powertec technology programming on PC/NC Gedpfs Afg H Nsx Aikjbw Powertec Easy Burn quick programming Powertec Handheld - multifunctional handheld control unit Manual erosion with Powertec Handheld High Speed Jump max. 18 m/min Generator power 60 Amps, EAGLE Powertec Travel ranges (X, Y, Z) 525 x 400 x 450 mm Electrode changer 20-position pick-up disk changer Work tank (W x D x H) 770 x 670 x 440 mm Work table (W x D) 750 x 650 mm Load capacity 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special equipment: Linear measuring system in all axes (Z as standard) 09.11.

Condition: used, Year of construction: 2009, x-travel 835 mm y-travel 510 mm Gedoy Ty A Sspfx Aiksbw z-travel 510 mm CNC-control iTNC530 HEIDENHAIN table-size 1000 x 560 mm max. table load 800 kg spindle taper SK 40 spindle turning speed range 20 - 14.000 U/min feed stepless 1 - 20.000 mm/min rapid traverse 20 m/min drive capacity - spindle motor 13 / 9 kW tool change unit 32 Pos coolant IKZ 25 bar voltage 400 V total power requirement 30 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 2,25 x 3,20 x 2,30 m chip conveyor 3,50 x 0,85 x 1,55 m coolant equipment 1,40 x 1,60 x 1,80 m spindle oil cooler 0,40 x 0,50 x 1,00 m - Serial-No.: 15415041384 - Machine ON: 72,882 h - Program Run: 25.267 h - control: HEIDENHAIN iTNC 530 - Linear scales in all 3 axis - electr. handwheel - Tool changer 30 pos. with double gripper - Chip conveyor - TSC with belt filter system - Coolant unit - new ball screw incl. bearings (X-Axis)

Condition: used, loading space width: 2,440 mm, loading space length: 6,060 mm, loading space height: 2,800 mm, Year of manufacture: 2011 Field of application: Freight transport Empty weight: 2.700 kg General condition: poor Technical condition: poor Visual appearance: poor Please contact Christian Theißen for more information Manufacturer: Unknown Model: Sanitary container Year of build: 2011 Condition: Used Price: € 1.250,00 excl. 19% VAT Data: Dimensions LxWxH: 6058x2438x2800 mm inside height: 2500 mm Modular construction: Container steel structure class EXC2 Additional Information: 3 exterior doors (opening outwards), 2 bathroom windows, 2 sinks with mirrors, 2 women's toilet stalls, 1 men's toilet stall, 3 urinals, women's and men's areas separated by an interior wall with a door, red exterior paint (RAL 3000), stackable, transport points according to ISO standard and forklift pockets included. Transport Points in accordance with ISO Standard: in the corners stackable: 3-times Roof: with layer structure Galvanized sheet steel: 0,55 mm Drainage of rainwater: via circumferential gutters in the frame, with downpipes in the corner posts Load-bearing capacity of the roof: 100 kg / m² Walls: Interchangeable panels with layered structure Floor: with layer structure Floor finish: 2 mm grey PVC flooring, welded at the joints and white PVC skirting board Gsdpfxs Adrm Ej Aiksbw Floor load capcity: 200 kg / m² Dimensions: 900x2.000mm Windows: white PVC-Windows Electrical installation: Electrical flush-mounted installation (concealed) Powerinstallation: 230V-sockets Lighting (2x16W): Lamps Empty weight: 2700 kg Information: Used, damaged, dents on the exterior walls. Only the container is being sold, WITHOUT stairs and septic tank. Location: 27572 Bremerhaven immediately available

Condition: new, empty load weight: 3,020 kg, maximum load weight: 11,380 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,480 mm, suspension: steel, tire size: 205/65 R 17,5, color: other, gearing type: other, front tire size: 205/65 R 17,5, rear tire size: 205/65 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 820 mm, vehicle interior width approx. 2,480 mm, front panel made of galvanized steel, 600 mm aluminum side boards, foldable and removable, removable stakes, 40 mm wooden floor, 3 stake pockets in the center for plug-in stakes 80 x 80, 6 lashing eyes, outer frame with lashing points, reinforced gearbox support with load and fast-travel mode, contour marking and side impact protection, fenders and spray suppression at the rear, surcharge for front panel grille 1,600 mm high (perforated sheet metal), price: 1,400 euros, surcharge for aluminum ramps, load-bearing capacity per pair 8 tons, and 2 x folding supports at the rear, price: 1,900 euros, -- subject to printing errors, mistakes, and changes, sample images --, more data under: !, More Details: ! Gbjde Agfpqepfx Aikew

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 62005_2.0x3.0-30HP, table length: 3,000 mm, table width: 2,000 mm, year of last overhaul: 2025, total length: 3,500 mm, total width: 2,500 mm, Equipment: safety light barrier, NEC / DUAL HEAD Power Jet Systems Multi-Axis Waterjet Cutting Table Sold with x2 Digital Control High-Pressure Waterjet Pumps HP Pump Models: SX 222 V3 (Yr. 2005) Pump & SX 245 Pump (Yr. 2001) Plus, includes KMT Abrasive Hopper TWIN HEAD Industrial CNC Waterjet Cutting System: Manufactured by NEC Power-Jet Systems, this heavy-duty multi-axis waterjet cutting table is designed for precision cutting applications using pure water and/or abrasive waterjet technology. The machine features a rigid steel box-frame construction with integrated water tank, servo-controlled motion system, and industrial CNC control software. Suitable for engineering, fabrication, stone, glass, plastics, composites, rubber, foam, and metal cutting applications. Key Features: Multi-axis CNC waterjet cutting table Precision Ball Screw or Precision Rack & Pinion drive systems Linear bearing slideways Baldor digital servo motors and drive system Gbodpfx Aoz Nll Hoikow Touchscreen operator interface Dedicated waterjet cutting software Integrated water tank/cutting table Adjustable water level system Abrasive distribution system mounted on gantry or Z-axis carriage Pure water and abrasive cutting capability Multi-head cutting configurations available Heavy-duty steel framework construction Stainless steel and anodised aluminium wetted components CAD/CAM compatibility with kerf compensation Nesting and material optimisation capability Dry-run facility and programmable jogging functions Technical Specification Construction Rigid heavy-duty steel framework Integral cutting tank and table Enclosed drive systems Cable trunking for protected service routing Local abrasive transfer unit Stainless steel and anodised aluminium wetted parts Integrated operator panel and electrical controls Motion System Precision Ball Screw drive (MaxiJet models) Precision Rack & Pinion drive (MidiJet models) Linear bearing guideways Baldor digital servo drives and motors Multi-axis configurations available: 2, 3 or 5-axis systems Software & Control Proprietary Power Jet cutting software CAD/CAM import capability Kerf compensation Material nesting and optimisation options Programmable jog speed control Home and return-home functions Dry-run programme verification Standard Machine Sizes MaxiJet: High-precision CNC waterjet table Ball screw drive system Standard cutting area: 2m x 3m Applications / Suitable for cutting: Steel Stainless steel Aluminium Stone Glass Plastics Rubber Foams Composite materials Technical engineering materials NEC Power Jet CNC Waterjet Cutting Machine | Multi-Axis Abrasive Waterjet Table | Servo Controlled Search Keywords Waterjet cutter, CNC waterjet, abrasive waterjet machine, pure waterjet cutter, Power Jet Systems, MaxiJet, MidiJet, industrial cutting table, CNC cutting machine, water jet cutting system, fabrication equipment, engineering machinery.

Condition: new, 1 brand-new 90° vertical milling head for retrofitting to conventional, NC, or CNC milling machines or drilling machines of any type, with L-R swivel function, manual tool clamping. Gjdpfez Dqx Tsx Aikjbw Technical data: Spindle mounting: ISO 50 Designed drive power: 22 kW Maximum speed: 3000 rpm Overhang: 350 mm Arbor support: Ø 180 mm Outer diameter of mounting surface: Ø 306 mm Head height: 441 mm Weight: 115 kg Accessories / Special features: • Manual tool clamping • The main spindle and all shafts and components are made of case-hardened and tempered chrome-nickel steel • 1 rotatable axis (left/right) • Ground gears • The rolling bearings of the main spindle consist of tapered high-precision rollers • Tool clamping with draw rod Delivery time: approx. 12-14 weeks after order receipt Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 2000, I - beam section - flat steel 100 x 15 (d 400) mm I-beam section - upend 60 x 10 (d 500) mm L-beam 50x50x6,0 (d 600) mm round material 35.0 (d 500) mm bar material dia. max. 70 x 1.5 (d 1500) mm square material 50x50x3.0 (d 1400) mm bending speed 8.5 U/min roll diam. toproll 152 / 162 mm bore 40.0 mm Stroke length 120 mm voltage 400 V total power requirement 1.1 kW weight 470 kg range L-W-H 900 x 600 x 1100 mm Original price with accessories: approx. 10.000 euros Features: - Two driven rollers (lower rollers) - Manual feed of the upper roller - Horizontal and vertical working positions - Shafts mounted with tapered roller bearings - Lateral, manually adjustable stop rollers - 1 set of standard rollersâ??split - 1 sets of tube rollers Gbedpez S U Ucefx Aikjw - 1 freely movable control unit - Operating instructions

Condition: excellent (used), Year of construction: 1995, Maximum center height: 330 mm Maximum distance between centers: 2000 mm Working area: Max. turning diameter over bed cover: 650 mm Max. turning diameter over cross slide: 360 mm Main spindle: Spindle diameter at front bearing: 140 mm Spindle bore: 107 mm Main drive: 58.5 kW 2-stage speed range: 4 – 750 rpm / 750 – 3060 rpm Feed drive: Rapid traverse rate X/Z axis: 10/10 m/min Gedpfsx Sx Htsx Aiksbw Turret: Number of tool positions: 12 Of which, driven tool positions: 6 Cylindrical shank tool holder: VDI 50 mm Dimensions / Weight: Footprint L x W x H: approx. 6400 x 2150 x 2000 mm Weight: 9400 kg Accessories / Special features: • CNC control system HEIDENHAIN TurnPlus EP 90 with color screen • Spindle orientation C-axis • 12-position turret, VDI 50, of which 6 positions with driven tools, manufacturer SAUTER DIN 5482 B 20x17, max. speed 3000 rpm. • Hydraulic 3-jaw chuck Ø 315 mm with various clamping jaws • Hydraulic steady rest with follower device • Hydraulic quill actuation • Air extraction system, manufacturer LTA • Various tool holders VDI 50 • CE compliant In 08/2025, GILDEMEISTER Service replaced the following parts: 1 servo motor, 1 AC servocontroller inverter power module for 2 axes, 1 power module Simodrive, 1 rectifier/inverter module, 1 control unit for 1 axis, 1 control module for 2 axes inverter servo drive, 1 Simodrive power module (1-axis motor) Total repair costs: 17,000.00 EUR net Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, offer consists of: New roller - for Stahlfolder/Heidelberg folders working width 56cm - 330€ / pc. working width 66cm - 365€ / pc. working width 78cm - 400€ / pc. ball-bearing for rollers: working width 40-94 cm - 28€ / pc. Gbedpfx Asxr Adtoiksw We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, offer consists of: New roller included ball-bearing Gbsdpoxr Ad Tefx Aikjw - for Horizon folders working width 54-56cm - 400€ / pc. We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: new, 1 brand-new universal milling head in an enhanced design for retrofitting to conventional, NC or CNC milling machines or drilling machines of any type, "HURON" system, manually swiveling over 2 levels, every angle adjustable Spindle mounting: ISO 40 Overhang: approx. 360 mm D8ot3uy Rated drive power: 10 HP Max. speed: 1800 rpm Milling head weight: approx. 82 kg Accessories / Special features: • With adapter plate in an enhanced design with an additional helical gear • Tool clamping: manual • The main spindle and all shafts and fittings are made of case-hardened and tempered chrome-nickel steel • 2 axes that can rotate relative to each other, allowing any setting angle! "HURON" system • Tapered fittings are ground according to the "KLINGELBERG" system • The rolling bearings of the main spindle consist of tapered high-precision rollers Gedpfx Aebpmw Nsikobw • 1 drive gear, helical • 1 tool clamping screw Delivery time: approx. 12-14 weeks, after order receipt Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: used, offer consists of: New roller - for Stahlfolder/Heidelberg folders working width 56cm working width 66cm working width 78cm Gedpfx Aeu Stcboiksbw ball-bearing for rollers: working width 40-94 cm We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, Year of construction: 2004, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 350 mm, TECHNICAL DATA Turning diameter: max. 465 mm Turning length: 1050 mm Diameter when turning: 680 mm Chuck diameter: 325 mm X-axis travel: 300 mm Z-axis travel: 1050 mm Control system: Fanuc Series 21I-TB Spindle speed range: Max. 3500 rpm Drive power: 33 kW Torque: max. 630 Nm Gbsdpfev Epzvsx Aiksw Bearing diameter in the spindle: 120 mm Max. bar diameter: 90 mm Tailstock stroke: 850 mm Tool post stroke: 150 mm Rapid traverse X/Z: 30 m/min Number of tool positions: 12 positions Tool holder: VDI 40 Accessories: Chip conveyor Tool holders, chuck jaws

Condition: used, Year of construction: 2004, Used Machine Year of Manufacture: 2004 Features and Technical Specifications: Base Machine: - Single-arm traveling column - Welded machine frame with ground prismatic guides - Rack-and-pinion drive in the X direction, ball screws in the Y and Z directions for precise positioning Machining dimensions: - Max. workpiece size for milling, minus cutter radius (tool diameter 25 mm): X = 3,015 mm, Y = 1,282 mm - Maximum travel ranges: X = 3,268 mm, Y = 1,483 mm, Z = 325 mm - Maximum programmable speed X = 78 m/min. Y = 78 m/min. Z = 26 m/min. Workpiece support with 4 brackets, pneumatically clamped; each bracket has 1 stop pin at the rear and 2 vacuum cups per bracket Display and definition in the program: - 2 side stops (right and left) - 2 large push buttons for clamping and releasing workpieces - 2 mounts for unused suction cups - 2 tape measure displays for positioning the brackets in the X-axis, relative to the left and right stops. - Rear stop or, alternatively, stops in the X and Y directions mounted at the front instead of the rear Drilling unit 7964, 18 spindles: - Drive power 2.2 kW - 14 vertical spindles, individually controllable, arranged in a T-shape, 10 in the X-direction and 4 in the Y-direction - 32 mm pitch - Max. drill bit diameter: 35 mm Gedpfxs Af I Upo Aikebw - Total drill bit length: 70 mm from the mounting end (depending on panel thickness) - Spindle extension stroke: 70 mm - Rotation direction: Alternating clockwise/counterclockwise, n(max.) 1,000 – 4,390 rpm, continuously adjustable - Mounting: M 10 thread – interference fit, diameter 11 mm - 4 horizontal spindles - 1 dual drilling spindle in the X direction - 1 dual drilling spindle in the Y direction - Mounting: M 10 thread – interference fit, diameter 11 mm - Total drilling length: max. 70 mm from the mounting end - Space available for: Optional dual drilling spindle in the X-direction or vertical adapter with double feed force Saw unit 7945: - Power: 1.5 kW - n(max.) = 1,000 – 4,850 rpm, continuously variable - 90° pneumatically swiveling for sawing/grooving in the X and Y directions - Tool holder: A diameter = 150 mm, I diameter = 30 mm, B = max. 8.0 mm Milling unit 7930: - Power: 6.0 kW (S6) - n(max.) 1,000 – 18,000 rpm, continuously adjustable - Liquid cooling - With HSK 63 F tool holder, with right-hand threaded nut (for right-hand tools) - With collet chuck with HSK shank - Ceramic ball bearings (hybrid bearings) - With pneumatically height-adjustable exhaust hood - Tool weight: max. 6 kg (including holder) - Tools: Milling and grinding tools, max. diameter 160 mm - 2 machining areas, each with 3 pneumatically controlled stop pins (standard at the rear, optional at the front) - Vacuum pump 40 m³/h, water-cooled with milling spindle cooling - Safety enclosure in accordance with CE standards - Selective safety foot mats (3-section layout) in the work area - Manual lubrication for all linear guides in the X, Y, and Z directions, for all milling spindle guides, for all console guides, and for all unit guides Control system: - PC control system with 17-inch monitor - Windows 2000 operating system - RJ45 network connection, 10/100 Base-T Fast Ethernet; processor clock speed: 2.4 GHz - US keyboard and Microsoft InteliEye mouse (optical) - Integrated 56K remote maintenance modem for data transfer - 3½-inch floppy disk drive, CD-ROM drive (CD burner) - TwinC...

Condition: new, Year of construction: 2026, Hydraulic winch for log splitters, cranes, mini excavators, tractors, agricultural vehicles, vineyards, horticulture, and many other applications. The hydraulic attachment winch simplifies many tasks. - Pull and position firewood for the log splitter - Pull logs onto trailers - Pull out tree stumps and trees - As an attachment winch for forestry cranes and small excavators - As a winch for small tractors and narrow-gauge tractors A robust steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes, offering many possibilities for attaching the winch (the threads are cut and painted; they must be recut with a tap before use due to the rust protection). A 20 m long and 6 mm thick steel cable is installed. A large cable pulley ensures a long service life for the steel cable. We install hydraulic motors from 50 to 630 ccm (standard = 400 ccm), depending on the required speed and pulling force. Maximum working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 l/min of hydraulic oil Color: red Dimensions: Length: 500 mm Length with swivel: 570 mm Front width: 120 mm Rear width: 180 mm Godpfx Aiodf Ud Sokjbw Bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm The winch is available for mounting or welding. This version comes with a manual hydraulic valve and hoses to the motor. Article number: HAW1700-HV NOTE: Figures 2, 3, and 4 are examples of mounting options!

Condition: new, Year of construction: 2026, Hydraulic winch for log splitters, cranes, mini excavators, tractors, agricultural vehicles, viticulture, horticulture, and many other applications. The hydraulic auxiliary winch can simplify many tasks: - Pulling and positioning firewood to the log splitter - Pulling logs onto trailers Gedpfsdf Ufdsx Aiksbw - Pulling out tree stumps and trees - As an auxiliary winch on forestry cranes and small excavators - As a winch for small tractors and narrow-track tractors A robust steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes offers many possibilities for attaching the winch (the threads are cut and painted. They must be re-tapped with a tap before use due to the rust protection). A 20 m long and 6 mm thick steel cable is installed. Large cable pulley for long service life of the steel cable. We install hydraulic motors from 50 to 630 ccm (standard = 400 ccm), depending on the required speed and pulling force. Maximum working pressure: 225 bar peak Continuous operation pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil Color: red Dimensions: Length: 500 mm Length with swivel: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm The winch is available for mounting or welding. This version includes an electric hydraulic valve and hoses to the motor. Article number: HAW1700-EV NOTE: Figures 2, 3, and 4 are mounting examples!

Year of construction: 1996, condition: ready for operation (used), travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: HEIDENHAIN, controller model: TNC407, overall weight: 13,400 kg, spindle motor power: 18,500 W, spindle speed (max.): 1,300 rpm, table length: 1,100 mm, table load: 3,000 kg, table width: 1,000 mm, number of axes: 4, This 4-axis TOS WH 10 CNC boring machine was manufactured in 1996. It features a longitudinal travel of 1250 mm, transverse feed of 1000 mm, and vertical travel of 1100 mm. The machine has a robust table size of 1000 x 1100 mm and a maximum table load capacity of 3000 kg. If you are looking to get high-quality boring capabilities, consider the TOS WH 10 CNC machine we have for sale. Contact us for further details. • Spindle diameter: 100 mm • Table size: 1000 x 1100 mm • Machine was rebuilt in 2018, the scope:- parts intended for grinding: machine bed, foundation slide, transverse slide, column, pallet,- inspection of gears, shafts, replacement of faulty and worn parts,- replacement of all bearings,- New Spindle- replacement of tubular shaft bushings,- Replacement of the bearing of the bearing ball screw- Belt replacement.- repair of the rope line that holds the counterweights,- replacement of the strap,- checking the hydraulic system,- Eliminate oil leaks- checking the oil system, cleaning, replacing faulty elements,- Grooving and processing of sliding surfaces with Diamant Moglice glue (base slide, spindle housingcross table), processing of oil grooves.- New production of conical lamellas,- interior painting,- repairs of covers, Henning protectors,- replacement of wire wipers,- repair of the cooling water system,- replacement of levers, buttons, scales, inscriptions,- grinding and adjusting the slats of mechanical fasteners,- the entire paintwork of the machine is RAL 601 Technical Specification Taper Size ISO 50 Gjds Adtm Hepfx Aikjbw Through-spindle Coolant No

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range X-axis: 2,200 mm Travel range Y-axis: 600 mm Travel range Z-axis: 600 mm Number of T-slots: 5 T-slot width: 18 mm T-slot spacing: 125 mm Distance from spindle nose to table: min. 200 mm Tool holder: SK 40 DIN 69871 Pull stud: DIN 69872 Tool clamping force: 12,000 N Inner bearing diameter: 80 mm Spindle speed: max. 8,000 rpm Main spindle motor at 100% duty cycle: 29 kW Main spindle motor (intermittent): 38.5 kW Speed range with constant power from: 1,500 rpm Feed force X, Y and Z axes at 100% duty cycle: 13,000 N Feed force X, Y and Z axes (intermittent): 16,000 N Rapid traverse rate X, Y and Z axes: 30 m/min Working feed rate X, Y and Z axes: max. 10 m/min Milling performance in steel St 60: 650 cm³/min Drilling diameter in steel St 60: 60 mm Threading performance in steel St 60: M36 Tool places: 24 Tool length: max. 300 mm Tool weight: max. 10 kg Tool diameter with full magazine: max. 85 mm Geds Afx Hhjpfx Aikjbw Tool diameter with free adjacent positions: max. 125 mm Tool change time: 3.5 s Tool change time chip-to-chip: 7 s MACHINE DETAILS Electrical connection: 55 kW Operating voltage: 400 V / 50 Hz Compressed air connection: 6 bar Coolant pump capacity: 0.75 kW EQUIPMENT Tool magazine with random tool management Coolant pump

Condition: used, functionality: fully functional, For sale is a used, sturdy steel storage platform with a usable area of approximately 140 m². The platform is ideal for expanding existing storage areas and for optimally utilizing the available hall height. The storage platform features a staircase, railings, and a pallet transfer station with chain securing. TECHNICAL DATA: - Length: approx. 11.35 m - Width: approx. 13.10 m - Usable area: approx. 140 m² - Lower edge: approx. 3.00 m - Upper edge: approx. 3.43 m - Staircase projection: approx. 4.55 m Gbjdpo Aiuitsfx Aikjw - Load capacity: min. 500 kg/m² (according to information, without proof) - Design: steel structure - Condition: used EQUIPMENT: - Including staircase - Including railings - Pallet transfer station with chain securing - Sturdy steel structure - Generous additional storage space PRICE: €7,500.00 net €8,925.00 gross, including 19% VAT IMPORTANT NOTES: The storage platform comes from a purchase. Static calculations, load proofs, and a type plate are not available. The stated load capacity of at least 500 kg/m² is therefore not proven by corresponding documents. The actual load-bearing capacity and suitability for the intended installation location must be professionally checked before reuse. All dimensions are approximate. PICKUP & LOADING: Location: Hamburg The storage platform will be disassembled and loaded for handover at the location in Hamburg.

Condition: good (used), Year of construction: 2001, Technical data: Working width: 4700 mm Max. bending capacity: 3.0 mm Max. bending angle: 3.0 mm CNC control Diameter of upper roller: 255 mm Diameter of side lower rollers: 255 mm Diameter of central lower roller: 255 mm Conical bending mechanism through angled positioning of the two side rollers Hydraulic tilting bearings Mobile control panel with display CE marking Dimensions (length x width x height): approx. 7200 x 2000 x 1800 mm Weight: approx. 9 tons Accessories: Gbedpe Ah Hucjfx Aikow Side sheet support device Condition: Very good condition The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: new, mileage: 1,450 km, power: 375 kW (509.86 HP), first registration: 01/2026, fuel type: diesel, axle configuration: 6x4, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, Equipment: AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, differential lock, electronic stability program (ESP), navigation system, onboard computer, traction control, - Leaf spring suspension - Brake booster - Differential lock - Air-suspended seats - Radio/CD - Sun visor EUROMIX TO GO – Immediately available new vehicles from stock in Porta Westfalica. Completely assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment. Price negotiable – please contact us. Gbedpfx Ajyzazkjiksw MAN TGS 26.520 BB 6x4 EURO 6e Concrete pump EuromixMTP SWAN TSP 38-5 RZ Initial registration date: 01/2026 Vehicle equipment: MAN TipMatic 12.28 OD - MAN TipMatic Offroad, - TipMatic Efficiency, 300 l tank volume - 35 l AdBlue tank volume High-performance engine brake MAN EVBec, adjustable Hill start assist MAN EasyStart Differential locks on driven rear axles Suspension type leaf/leaf (BB) on front axles and driven rear axles Sun visor, in front of windshield Windshield wiper operation, automatic, with rain sensor (automatic wiper system) Daytime running lights, LED - High beam assistant - Work lights on the rear of the cab, Exterior rearview mirrors, electrically adjustable, heated Driver comfort seat, air-suspended - Armrests for driver's seat Multifunction steering wheel, adjustable in height and inclination Preparation for toll collection system Toll Collect EuromixMTP - Concrete pump SWAN TSP 38-5 RZ Model: SWAN TSP 38-5 RZ Section: Concrete pump: Max. theoretical concrete capacity: m³/hr Max. theoretical concrete pressure: 85 bar Stroke rate 30 per minute Delivery cylinder: Ø230 mm x 2100 mm stroke Hydraulic main cylinder: Ø2100 mm x Ø140 x Ø80 mm Concrete valve: S-valve, water pump: 20 l/min - bar Water tank: 600 l, 12 m hose with spray gun Concrete hopper: 600 liters Lubrication: Lincoln automatic lubrication for hopper group Hydraulic pumps: Rexroth 2xA4VG145, Rexroth A10VO28 Rexroth A17FO045, Blau Ascend AP 20.140/115 Switching system: Magnetic sensor (proximity switch) Switch box: DIGITEX, waterproof Remote control: Scanreco remote control + 30 m cable Section: Boom: Boom S 38-5 (5-section boom, RZ folding) Type: RZ folding Max. vertical reach: 37.5 m (without end hose) Max. horizontal reach: 32.7 m (without end hose) End hose: 3m single flange, DN 125 Platform type: X-type Slewing bearing: 365 degrees Slewing speed: 0.3 RPM Diameter of delivery line: 125 mm (outside diameter 132 mm) 5.5" flanges & couplings Control system Front outrigger width: 6.3 m Rear outrigger width: 8.2 m Your advantages • Immediately ready for use: Concrete pumps, concrete mixers, dump trucks, roll-off tippers • Chassis, body and assembly from a single source • Fair prices • Financing in 19 European countries • Trade-in of your used vehicle Your contact persons • Denis Omeragic: German, English, Bosnian, Croatian, Serbian • Henri Omeragic: (German, Bosnian, Croatian, Serbian) • Harun Cevik: (German, English, Turkish) • Jamila Azzi: (French, Arabic) • Olga Tissen: (German, Russian) • Karolina Cyburt: (Polish) EuromixMTP GmbH, Gänsekamp 7, 32457 Porta Westfalica | ...

Condition: used, Year of construction: 2014, CNC Lathe Manufacturer: GOODWAY Model: GS 280 Year of manufacture: 2014 Control system: FANUC Series Oi-TD Technical details: Control system: FANUC Series Oi-TD Swing over bed: 670 mm Swing over carriage: 500 mm Max. turning diameter: 400 mm Max. turning length: 600 mm Spindle nose: A2-8 Spindle bore: 90 mm Front bearing diameter: 130 mm Spindle speed: 35 – 3,500 rpm Number of tool stations: 12 positions Additional information: In our assessment, the machine is in good used condition and can be inspected under power by appointment. Gbodpfx Aijzvzaujkow Accessories, tools shown, and workholding devices are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.