Serial No. 15 UO585
Maximum bevel width 35mm
Maximum material thickness 10mm
Bevelling Angle +60 / -60 degrees
Input 240/1/50hz
Feed Speed 250 - 500 mm/min
Equipment 3 x 120mm guide tracks, 3 x track clamps
Features Beveling in both directions
Grs3l8gys
Length 1200mm
Width 360mm
Height 800mm
Nett weight actual. 160 Kgs.
Literature I/B
Weld beveller, weld bevel former, weld seam preparation, weld bevel forming machine, edge milling machine, edge milling machine, mobile milling machine
Ber3oyfet7
-Bevel length: max. 20 mm
-Max. Material thickness: mm
-Dimensions box: 460/360/H355 mm
-Weight: 24 kg
Technical data:
min. / max. material thickness 3 - 25.0 mm
max. helix length steel 400N/mm² 10 mm
0kh2rynd
max. helix length steel 600N/mm² 8 mm
max. helix length steel 800N/mm² 5 mm
Working speed approx. 2.5 m/min
Stroke rate 400 1/min
Drive 400 V / 2000 Watt
Space requirement approx. W 550 x D 200 x H 300 mm
Weight approx. 13 kg
Beveller, edges former, edges Broacher Trump
Chamfering steel plates to the weld seam preparation
Type TKF 103
Sheet thickness: 4-25 mm
Helix length max: 10 mm
Helix angle: 30°
Power: 2000 Watt
Power supply: 220 volts, 50 Hz
-equipped with guide bracket for 30° Helix angle - nachschleifbarer shock steel for high tool utilization
-multiple shock steels
-Base plates 6, 8, 10, 12, 14, 16, 18, 20, 22 mm for different material thickness
To the arrival angles of straight and curved edges with at least...
sloping angle: 30 °
max. sloping width (at 40 kg solidity): 13 mm
electrical connection: 380 V kW
Cpchck
space needed: 820 x 850 x 1380 mm
weight: 700 kg
Beveller Fabr. TRUMPF type TKF 100
Mowel
Masch.# 702592
Technical data:
maximum sheet thickness 25 mm
Helix angle 15-60 °
maximum bevel position at 40 kg strength 10 mm
maximum working speed 2.5 m / min.
Strokes per minute 500
Power 1900 / 1400 W
Weight 14.5 kg
Power supply 220 V / 50 Hz
used
Weld beveller, weld bevel former, weld seam preparation, weld bevel forming machine, edge milling machine, edge milling machine, mobile milling machine
-Edge milling: 0 - 3 mm
-Drive: 0.45 kW
-Angle: adjustable
Pfurkyzr
-Dimensions: 485/345/H250 mm
-Weight: 18.2 kg
Beveller
Offer number: 20122
Make: TRUMPF
Type: TKF 104 - 0
machine no.: 4522206
Year of construction: ca.2006
Technical data:
min. / max. material thickness 3 - 25.0 mm
Helix angle Standard 30° - 37.5° - 45
max. helix length steel 400N/mm² 11 mm
max. helix length steel 600N/mm² 9 mm
Jvlsce
max. helix length steel 800N/mm² 6 mm
smallest inner radius 50 mm
smallest inner pipe diameter 80 mm
Operating speeds 2.5 m/min
Stroke rate 400 1/min
Drive 400 V / 2000 Watt
Space requirement a...
Weld beveller, weld bevel former, weld seam preparation, weld bevel forming machine, edge milling machine, edge milling machine, mobile milling machine
-Bevel length: max. 12 mm
-max material thickness: 40 mm
-Angle: cutting angle adjustable via the pressure roller
-Chamfering of pipes: minium inside Ø 100 mm
-Feed: up to 2600 mm/min
-Dimensions: 480/320/H570 mm
Bfjvqt0eft
-Weight: 65 kg
Weld beveller, weld bevel former, weld seam preparation, bevel forming machine, edge milling machine
-Bevel length: max. 10 mm
-Strength: 40 kg/mm²
-220 V 1800 W
-470 strokes/min
-Weight: 15 kg
Libqf
Weld beveller, weld bevel former, weld seam preparation, bevel forming machine, edge milling machine
-with tripod
-Bevel length: max. 10 mm
-Max. Material thickness: 25 mm
-Strength: 40 kg/mm²
-220 V 2000 W
-Strokes at full load: 400 strokes/min.
-Dimensions: 560/220/H570 mm
-Weight: 18 kg
Gulkkc
Bevelling machine, bevelling machine, weld seam preparation, bevelling machine, edge milling machine, edge milling machine, mobile milling machine
-Bevel length: max. 30 mm
-Max. Material thickness: 40 mm
-Feed: up to 500 mm/min
-Dimensions box: 780/580/H400 mm
-Weight: 68 kg
Nmd9d
SEW Eurodrive KA57/T DV100L4/TF bevel gear motor, serial no. as per photo, second-hand, good condition, 100% functional, scope of delivery as per photo ATTENTION: Please inquire separately for packing and shipping costs! ATTENTION: Please enquire for charges for packing and transport separately!
2risli
sheet width 3025 mm
plate thickness 2,0 mm
distance between columns 3200 mm
upper clamping bar adjustment mm
adjustment of lower beam 90 mm
weight of the machine ca. 3,9 t
range L-W-H 4,0 x 1,0 x 1,65 mm
* Machine is sold in a defective condition *
* Gear housing would have to be replaced *
already repaired:
Blwkyrapnh
* Gear bevel gears including bearing bushes & bearings
Furnishing:
- Bending angle preselection via electr. Potentiometer
- Goat foot tool + bending rail
- Central lubricati...
General Manufacturer Bartec Schwarte Location Bremen Condition used
Tank volume 37.000 litres Max. Overpressure 0,99 bar Max. permissible operating temperature 110 °C Type of construction standing form feet height adjustable Number of feet 4 pieces
Insulation Insulation available Insulation jacket hermetically welded Material insulation jacket stainless steel
Technical data / dimensions Diameter inside 3.090 mm Diameter outside 3.200 mm Cylindrical height 4.500 mm Total height 7.650 mm Wall thic...
max. wheel diameter 270 mm
gear width 58 mm
max. module 6,5
min. module 1,5
Control Sinumerik 840D
tooth width 58 mm
spiral angle 0 / 60 °
max. number of teeth 180
min. number of teeth 6
transmission ratio max. 1:1
transmission ratio min. 1:10
blade cutter head diameter 39-105 mm
blade head turning speeds 1500 U/min
spindle speeds 1500 mm
total power requirement 40 kW
weight of the machine ca. 11,2 t
dimensions of the machine ca. 3,7 x 2,1 x 2,1 m
Equipment/ Accessories:
Civ3sdl3
- lo...
In excellent working condtion glass beveling machine from Bovone type mini maxi 361+1
Btmisbywx3
BOVONE MINI MAXI 361+1 - Year 1997
Bevel Angle 3-45°
Thickness 3-25 mm
Min workable 35 x 35 mm
Max Bevel Width 60 mm
Speed 0.4-5.4 mt/min
Power 22 Kw
For more info and movies in working order please contact us
orbital beveling machine, pipe saw, pipe cutting machine, pipe beveling machine
-Pipe diameter: 25 - 120 mm
-Milling tool with hard metal disc type: SMP 40
-with: outside diameter scanning system
-Dimensions: 720/640/H1260 mm
-Weight: 196 kg
Beqnzlre2k
SEW Eurodrive KA57/T DV100L4/TF bevel gear motor, serial no. as per photo, second-hand, good condition, 100% functional, scope of delivery as per photo ATTENTION: Please inquire separately for packing and shipping costs! ATTENTION: Please enquire for charges for packing and transport separately!
Nnsph
Rad-Ý - max. 630 mm
gear width 100 mm
max. module 8 mm
min. module 3,5 mm
swival range +/- 0-90 °
distance of workpiece spindle-taper cone 315 mm
turning speed range 18-111 U/min
roll feed 1-50 °/min
plunge feed hydr. stepless 0,1-5 mm/min
electrics - voltage/frequency 380/50 V/Hz
total power requirement 30 kW
weight of the machine ca. 20 t
dimensions of the machine ca. 4,8 x 2,3 x 2,4 m
Ux3xpi3v
General Manufacturer Ullmann Location 2 x Bremen, 4 x 57234 Wilnsdorf Condition used
Kybwg7c
Tank Volume 25.500 Liter Vacuum 0,40 bar Max. Overpressure 0,40 bar Type of construction standing form feet Number of feet 4 pieces
Insulation Insulation available Insulation jacket hermetically welded Material insulation jacket stainless steel
Technical data / dimensions Diameter inside 2.500 mm Diameter outside 2.650 mm Cylindrical height 5.000 mm Total height 8.050 mm Wall thickness bottom 5.0 mm Wall...
max. wheel diameter 500 mm
gear width 350 mm
max. module
min. module
Control FANUC 16 M
turning speed range - stepless 0-3000 U/min
total power requirement 29 kW
weight of the machine ca. 7,5 t
Bhcn3wdbul
dimensions of the machine ca. m
max. wheel diameter:200 mm
gear width:250 mm
max. module:3
Beqoiil8e3
min. module:0,5
total power requirement:45 kW
weight of the machine ca.:8,5 t
dimensions of the machine ca.:4,4 x 2,4 x 2,7 m
Machine out of prototype production
Without automation
Weld beveller, weld bevel former, weld seam preparation, weld bevel forming machine, edge milling machine, edge milling machine, mobile milling machine
-with: rail system
-12x rails length: 1210 mm
-Bevel length: max. 30 mm
-max material thickness: 40 mm
-with: electronic feed device electronically adjustable
-Dimensions box: 1170/780/H510 mm
Ber3oot893
-Weight: 320 kg
Exhibition machine
Year of manufacture: 2020
Equipment and technical data:
> Solid German machine construction
> for dressing and jointing including hollow and
and point joint adjustment for HOBEL WIDTHs
up to 510 mm and max. chip removal up to 8 mm
> Ergonomic working position directly
the cutter head
> Panhans four-knife shaft with strip planing knives
and setting devices
> finely planed cast iron tables, total table length
2850 mm
> Control panel on top at eye level with digital
display of th...
saw blade diameter 350 x 32 mm
cutting diameter 120 mm
capacity 90 degrees: square 110 mm
capacity 90 degrees: flat 200 x 88 mm
Btkkt33mmb
capacity 45 degrees: round 115 mm
capacity 45 degrees: square 110 mm
capacity 45 degrees: flat 150 x 80 mm
turning speeds Sägeblatt 3.600 U/min
total power requirement 2,2 kW
weight of the machine ca. 608 kg.
range L-W-H 1800 x 1450 x 1800 mm
** New price approx. 22.000 euros
Furnishing :
- Fully automatic ALU circular saw
- Miter left + right 45 °
- Head...
General Location Bremen Condition used
tank volume 25.000 litres lower bottom flat bottom with slope type of construction standing
Insulation Insulation available Insulation jacket hermetically welded Material insulation jacket stainless steel
Technical data / dimensions Diameter inside 2.530 mm Diameter outside 2.650 mm Cylindrical height 4.950 mm Total height 6.200 mm
Equipment manhole / dome in cylinder Type plate Equipment aeration / deaeration, spray head, crane eyes Outlet pipe end Ø appro...
One-sided automatic edge banding machine with pre-milling
unit, direct glue application to straight workpieces (EVA-PUR
Glue pot with run-out function/optional), HF-cut-off saw station,
HF-top and bottom milling unit, chain feed, double roller
top pressure, extendable work piece support and signal lamp
for work piece sequence. For ABS, PVC, melamine and strong
wood veneer roll material as well as fixed lengths from 0.4 –
3.0 mm and of 8 – 50 mm work piece thickness.
Speed: 7,0 m/min.
• 2 spaces...
Technical data:
Feed speed 1.5 / 3.1 m/min
bevel angle 25 - 55
small straight edge 3 mm
max. sheet thickness 50 mm
outside dimensions 1360 x 1110 x 1510 mm
weight approx. 1300 kg
Scope of delivery: additional 2x knives
Btw03utthe
Measuring plate, measuring plate, measuring and control plates, hard stone, measuring table, spotting plate, spotting table, test plate
D3deblqe3
-Microplan: hard stone measuring plate with 10 mm T-slots
-Surface: lapped
-Stainless steel: edging
-Edges: bevelled on the reverse
-Panel thickness: 100 mm
-Dimensions top: 1840/840/H100 mm
-Transport dimensions: 2090/950/H315 mm
-Weight: 494 kg
max. wheel diameter:80 mm
O7epj
gear width:170 mm
max. module:3
min. module:0,5
total power requirement:48 kVA
weight of the machine ca.:9 t
dimensions of the machine ca.:7,64 x 3,14 x 3,25 m
For technical data, see PDF-File enclosed
Technical specifications:
Work plate: 12000 x 3000 mm
Btgib7ivz8
Steel cutting: 40 mm
Working angle: 45°
Plasma Source: Hypertherm HPR260
More info:
Plasma rotary head machine for bevel cutting up to a maximum of 45 °.
Donaldson DFPRO 12 CY Suction Unit
Notes:
Availability from august
Logistic cost - Approx. €12.000,00
General condition used
tank volume 27.000 litres construction standing form feet number of feet 4 pieces
Technical data / dimensions Diameter inside 2.730 mm Cylindrical height 4.500 mm Total height 6.800 mm
Equipment manhole / dome in the cylinder Equipment crane eyes Outlet pipe end approx.Ø 100mm Remark Outlet end bevelled last Intended use brewery
Ytnydo
Material composition Material in contact with product V2A 1.4301 (AISI304) Material feet Steel
max. wheel diameter 275 mm
gear width 55 mm
max. module 6
min. module 1
Control 840 C Siemens
total power requirement 100 kW
Ewaz8yp
weight of the machine ca. 16,7 t
dimensions of the machine ca. 5,2 x 2,3 x 2,4 m m
x-travel 500 mm
y-travel 500 mm
z-travel 350 mm
table surface area 800 x 450 mm
spindle taper: ISO 40
quill stroke mm
feed - longitudinal/cross mm/min
feeds vertical mm/min
Nlnlb
turning speed range max. 3150 U/min
voltage 380 V / 50 Hz
power capacity 4 kW
weight of the machine ca. 1,7 t
dimensions of the machine ca. 2,5 x 2,3 x 2,0 m
HEIDENHAIN TNC 155 - control,
with electrical hand wheel,
several tool tapers,
new set of bevel gears,
Gear, bevel gear
Ew0xnc0b0
-Gearbox No.: 1511747
-Shaft: Ø 22 mm
-Hollow shaft on the coupling side: Ø 19 mm
-Translation: i 30,000
-Torque: (80 Nm)
-Number: 2x available
-Price: per piece
-Dimensions: 215/100/H125 mm
-Weight: 7 kg
max. wheel diameter:80 mm
Bn2ujqlm
gear width:170 mm
max. module:3
min. module:0,5
total power requirement:48 kVA
weight of the machine ca.:9 t
dimensions of the machine ca.:7,64 x 3,14 x 3,25 m
For technical data, see PDF-File enclosed
Very neat Morat gear hobbing machine.
O8hel
This machine comes from a practical school and has been little used and well maintained.
With this machine, bevel teeth can also be milled.
Equipped with central lubrication.
380v
General Location Bremen Condition used
tank volume 25.000 litres construction form standing form feet height adjustable number of feet 3 pieces
Technical data / dimensions Diameter inside 2.600 mm Cylindrical height 4.500 mm Total height 6.250 mm
Equipment manhole / dome in cylinder Type plate Equipment aeration / deaeration, spray head, crane eyes Outlet tube end approx.Ø 100mm Remark Outlet end bevelled last Intended use fruit juice industry
Material Condition Material in contact with product ...
max. wheel diameter 275 mm
gear width 55 mm
max. module 6
min. module 1
Control 840 C Siemens
total power requirement 100 kW
weight of the machine ca. 16,7 t
dimensions of the machine ca. 5,2 x 2,3 x 2,4 m m
Bplsrduawc
One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces, end trimming station, HF-top and bottom milling unit, chain feed, double roller top pressure and extendable work piece support. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 2.0 mm and of 8 – 50 mm work piece thickness.
• Speed: 5,5 m/min. • 1 space for finishing unit • 3,5“ Colour Touch screen
Bpd2zsvhwf
→Automatic edge feeding for ...
Gear motor, electric motor, three-phase motor, electric gear motor
C2d7msey
-Speed: 50 rpm
-Power: 0.75 kW
-Construction: bevel gear hollow shaft
-Diameter shaft: Ø 25 mm
-Protection class: IP 54
-Dimensions: 400/220/H220 mm
-Weight: 14.5 kg
max. wheel diameter:80 mm
gear width:170 mm
max. module:3
Bth9itc3tg
min. module:0,5
total power requirement:48 kVA
weight of the machine ca.:9 t
dimensions of the machine ca.:7,64 x 3,14 x 3,25 m
For technical data, see PDF-File enclosed
Tenon milling in perfection
A video of the machine in operation can be sent on request.
Program 1: Set-up mode
Program 2: Manual milling
Program 3: Straight or slanted tenons up to 60degrees with chamfering and bevelling
Program 4: Flattening, e.g. for corner and ridge blades
Fycmwrj83
Precise adjustment possibilities and exact positioning by laser
Special milling head with milling ring for flattening, chamfering and tenoning
Powerful 6 kW motor with automatic motor brake
Feed regulation for har...
General condition used
tank volume 6.500 litres construction standing form feet height adjustable number of feet 3 pieces
Fn7kz09
Technical data / dimensions Diameter inside 1.940 mm Cylindrical height 2.000 mm Total height 3.900 mm
Equipment manhole / dome in the cylinder, in the upper bottom Equipment spray head, crane eyes Outlet tube end Ø approx. 50mm Remark Outlet end bevelled Remarks 1 dent in the cylinder last Intended use food (syrup)
Material Condition Material in contact with product ...
max. wheel diameter 275 mm
gear width 150 mm
max. module 6
min. module 1,5
total power requirement 62 kW
weight of the machine ca. 12 t
dimensions of the machine ca. 4,7x4,4x2,45 m
max. wheel diameter mm
gear width mm
max. module 6
min. module 1.5
max. workpiece diameter 275 mm
tooth width max. 5.5 mm
spiral angle 0 - 60 °
number of teeth 5 - 120
transmission ratio min. 1:1
transmission ratio max. 1:10
milling drive motor 20 kW
workpiece drive 14.5 kW
total power requirement 62 kVA
wei...
saw blade diameter 350 x 32 mm
turning speeds 3000 U/min
100 x 100 mm
170 x 60 mm
capacity 90 degrees: round 100 mm
Bigmm283
work height max. 970 mm
Cutting height max. 100 mm
total power requirement 1,9 kW
weight of the machine ca. 260 kg
dimensions of the machine ca. 1400 x 850x 970 mm
Description:
The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left
and 22.5 ° right and an automatic miter adjustment via stop functions.
The saw stroke runs automatically and the ...
