Used Beam Saw for sale (11,061)

Year of construction: 1980, condition: used, Circular saw with miter cut Make KALTENBACH Type:KKS 400 M Year.ca.1980 Hydr.feed infinitely variable. Saw blade: 400mm Crjdpjixumvsfx Abbok

Condition: new, Year of construction: 2022, functionality: fully functional, Holtec ES 121 SHK 4 m Year of manufacture: 2022 Control: Simatic HMI Saw chain: 4788 (190 cm) Guide bar: 3322 (190 cm) Sawn timber data: Packages for cutting: Max. 4200, an.= 1200 al.= 1200, Minimum: 2,500 Packages after cutting: max: 4,000, min: 700 Cutting waste: max. 300 Operating voltage: 400 V 50 Hz Crodox Dmavepfx Abbek Oil filling: HLP-D-32 Tank capacity: 70 l Pressure: 70 bar The machine is unused and dismantled. Inspection possible at any time.

Condition: used, Year of construction: 1991, saw blade diameter 275 mm cutting diameter 90 mm cutting speed 80 m/min EISELE Miter Circular Saw VMS 120 Saw blade diameter: 275 mm Cutting capacity at 90° (round): 90 mm Cutting capacity at 90° (rectangular): 75 × 75 mm Cutting capacity at 45° miter (rectangular): 75 × 75 mm Saw blade speed: 40 / 80 rpm Credpfox Avtvjx Abbok Drive motor: 380 V, 1 / 1.2 kW Required floor space: 700 × 600 × 1580 mm Weight: approx. 180 kg

Condition: used, Year of construction: 1999, cutting diameter max 400 mm mit Sägeblättern Cjdsw Sygmepfx Abberk weight of the machine ca. 1,4 t

Condition: used, tank capacity: 2,420 l, GENERAL Equipment: Lifting lugs Design: suspended Remarks: Manhole DN 350/450 (manhole cover incomplete); support ring, Fe; flanges partially Fe Speed: 46 - 230 rpm Internal diameter: 1,400 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX guidelines under local conditions must be verified) Overall height: 3,400 mm Heating/Cooling: available Power: 2.2 kW Crjdpfx Aboxqaycjbsk Max. permissible operating temperature: 200°C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top head: top head removable / hinged Agitator seal: Mechanical seal with thermosiphon vessel Agitator type: Paddle agitator Support type: Ring Location: Bremen Technical documentation: Drawing, various documents, acceptance certificate Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,420 liters Jacket volume: 100.0 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4435 (AISI 316) Condition: used Cylindrical height: 1,180 mm Last application: Pharmaceutical chemicals VESSEL Max. permissible operating temperature: 200°C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: Half-pipe coil EQUIPMENT Manhole / Dome: in the top head Outlet: available MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Agitator manufacturer: Ekato Voltage: 400 Volt Power breaker: TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.1 mm Agitator arrangement: centered in the top head Agitator equipment: Paddle & propeller agitator elements mounted on the shaft; speed previously controlled by external frequency converter (no longer available); various technical documents for the agitator available Top head wall thickness: 7 mm

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 1,250 mm, cutting width at rip fence: 1,250 mm, cutting height (max.): 80 mm, cutting height with scoring (max.): 80 mm, saw blade diameter: 300 mm, table length: 3,200 mm, height adjustment type: hydraulic, type of input current: three-phase, input voltage: 400 V, Equipment: saw blade guard, Year of manufacture: 1991, in very good condition and free of play First owner Almost exclusively used for processing panel material Sliding table 320 cm 45° hydraulically tiltable Scoring unit All stops, protective covers, and required accessories included Cedpsx Dkvzefx Abbork

Condition: ready for operation (used), Year of construction: 1990, Automatic band saw AMADA, Model: HFA 250 W, Year of manufacture: 1990 Cjdpfx Aboxyx A Isbjrk Cutting range, round material: 30–250 mm Square: 270 mm x 250 mm Machine is in ready-to-operate condition. Machine documentation available.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 566-06124, Doall automatic bandsaw in good working condition. Crjdpfx Abjx A S Agobsk Cutting capacity round: 335 mm Year of manufacture: 2006

Condition: excellent (used), Danobat CP11.11 Horizontal Bandsaw Year 2009 Serial Number 0909901302 Max Size 1100mm x 1100mm Csdexwk Idepfx Abberk Additional Features Year 2009 Variable Speed Front & Rear Tables Total Power 16kw Total Weight 10800kg

Year of construction: 2007, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1340020469, Mitre Saw Machine AKS 134/00 1 x Saw Blade Ø550mm 1 x Saw Blade Ø500mm Codpfx Abex A D Ihsbjrk Equipped with digital angle setting readout

Condition: used, tank capacity: 3,690 l, GENERAL INFORMATION Design: suspension-mounted Remarks: Support ring made of steel; manway cover incomplete; on one vessel, the heating connections are mostly cut off and supplied loose; one vessel is approximately 100 mm shorter in overall height due to different motor/gearbox assemblies Speed: 42 - 211 rpm Internal diameter: 1,600 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 3,750 mm Heating/Cooling: available Power: 3 kW Max. allowable operating temperature: 200 °C Max. allowable operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: blade agitator Support design: ring mounting Location: Bremen Technical documentation: drawing, various documents, inspection certificate Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,690 litres Double jacket volume: 145.0 litres Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 1,380 mm Last application: pharmaceutical chemistry VESSEL Max. allowable operating temperature: 200 °C HEATING/COOLING JACKET Max. allowable operating underpressure: 1.0 bar Bottom temperature control: half-pipe coil EQUIPMENT Manway / dome: in top head (DN 500) Outlet: 130 mm MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) AGITATOR 1 Agitator manufacturer: Ekato Crjdpfx Abjxqax Ejbsk Voltage: 400 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.1 mm Agitator positioning: centred on the top head Agitator features: Minor variations in agitator design (Interprop blade agitator installed on the shaft for media up to approx. 3,000 mPas; on one vessel an additional stabilising propeller is mounted on the shaft); speed range adjustable via external speed controller (no longer available) (for one of the agitators this speed range is 25 - 126 rpm); partial technical documentation on agitators available Top head wall thickness: 7.9 mm

Condition: new, cutting diameter 250 mm saw band length 2950 mm cutting width 280 mm dimensions of saw-band 2950 x 27 x 0,9 mm capacity 90 degrees: flat 280 x 200 mm capacity 90 degrees: square 230 mm capacity 45 degrees: round 190 mm capacity 45 degrees: flat 180 x 180 mm capacity 45 degrees: square 180 mm capacity 60 degrees: round 120 mm capacity 60 degrees: flat 110 x 110 mm capacity 60 degrees: square 110 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,4 t Powerful miter band saw for cuts from 0 ° to 60 ° left -CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and switch-off at the end of the cut) Crsdsxz Hhzjpfx Abbek Description: -Manual cutting cycle -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring -Stable, torsion-resistant and low-vibration saw frame made of cast steel -Vice with quick release - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Hydraulic unit for the saw band tension and monitoring with display on Manometer (belt tension = 900 kg) -Clearly arranged control panel with all controls -Electric coolant pump for cooling and lubricating the saw band -Schipping brush for cleaning the saw band

Year of construction: 1980, condition: ready for operation (used), Band saw machine Make KÖLLE Type:ST 105 Year 1980 Credpfx Abemp Trwsbjk overhang 1050 mm with saw band - welding device IDEAL . Infinitely variable speeds. Machine ready for use condition.

Condition: excellent (used), Year of construction: 2017, Holzkraft Bandsaw HBS 940 AS – Top Condition – Very Low Hours – DESCRIPTION - Heavy-duty design with high dead weight for maximum running smoothness - Especially quiet and precise operation thanks to a torsion-resistant machine frame - Cast iron flywheels with rubber coating and cleaning brush - 3-roller precision blade guides standard, above and below - Large grey cast iron saw table, tiltable from 0° to +15°, ground and polished surface - Large cast iron parallel fence with round bar guide, easily adjustable - Saw blade tension indicator - Precise cutting height adjustment via rack and pinion, with millimeter scale - Self-braking motor TECHNICAL DATA Dimensions and weight Length (product) approx. 1550 mm Width/depth (product) approx. 920 mm Height (product) approx. 2900 mm Weight (net) approx. 860 kg Dust extraction connection Extraction port diameter: 2 x 140 mm Work table(s) Table length: 1250 mm Table width: 800 mm Table height: 1060 mm Table tilt: 0 - 20° Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Output power: 5.5 kW Cutting range Max. cutting height at 90°: 560 mm Max. cutting width: 910 mm Bandsaw blade Blade speed: 1550 m/min Flywheel diameter: 940 mm Blade length: 6690 mm Min. blade length: 6630 mm Max. blade length: 6700 mm Min. blade thickness: 0.8 mm Max. blade thickness: 0.9 mm Cedoxz Ulzepfx Abbsrk Blade guide: precision guide above and below Location: ex-stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1988, Ja Stanzkraft 800 kN frequency 50 Hz current 17/11 A voltage 220/380 V Cjdpforyaqyox Abberk round bar steel 32-17 mm square edge steel 30-18 mm 100 x 10 mm flat steel 350 x 16 mm throat 200 mm work height max. 1107 mm total power requirement 4 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 1200 x 700 x 1850 mm

Condition: used, tank capacity: 3,586 l, GENERAL Equipment: lifting lugs Design: suspended Remarks: Sight glasses in manway covers missing; support ring made of Fe; some flanges made of Fe Speed: 30–184 rpm Internal diameter: 1,600 mm Explosion proof: Motor is explosion-proof (compliance with current ATEX directives under local conditions must be verified) Overall height: 3,750 mm Crodpfxoxqaxxj Abbjk Heating/Cooling: available Power: 6.8 kW Max. allowable operating temperature: 200 °C Max. allowable operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: beam agitator Base design: ring Location: Bremen Technical documentation: drawings, various documents, inspection certificate Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Capacity: 3,586 liters Double jacket volume: 202.0 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 1,377 mm Last application: pharmaceutical chemicals VESSEL Max. allowable operating temperature: 200 °C HEATING/COOLING JACKET Max. allowable operating vacuum: 1.0 bar Bottom temperature control: half-pipe coil EQUIPMENT Manhole / Dome: on top head (DN 500) Outlet: 130 mm MATERIAL DETAILS Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Agitator manufacturer: Ekato Voltage: 400/690 Volt Current interrupter: TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.5 mm Agitator arrangement: centrally in top head Agitator equipment: Technical documentation for agitator available; Interprop beam agitator and inclined blade agitator installed on shaft; speed adjustable by handwheel Top wall thickness: 9.1 mm

Condition: excellent (used), Year of construction: 2002, ALU-profile mitre saw Fabr.Dry Tech Type:355 MLS Year 2002. Saw blade dm.355 mm Cutting range round max.120 mm Cjdpfx Abetwn E Ujbork Square max 120 mm X 120 mm

Condition: used, Year of construction: 1980, 400 mm Cjdoxzu Dwopfx Abberk weight 1,3 t miter ja

Condition: used, tank capacity: 3,860 l, GENERAL INFORMATION Equipment: Crane lugs Design: Suspended Notes: Support ring, Fe; manhole cover incomplete (see photos) Rotation speed: 61 rpm External diameter: 2,090 mm Internal diameter: 1,800 mm Explosion protection: Motor is explosion-proof (compliance with current ATEX directives under local conditions must be verified) Total height: 3,050 mm Heating/Cooling: available Insulation: available Power: 4 kW Max. permitted operating temperature: 200 °C Max. permitted operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: Beam agitator Stand/base type: Ring Location: Bremen Technical documentation: Drawing, various documents Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,860 litres Double jacket volume: 136.0 litres Cylinder wall thickness: 6 mm Crjdoxqaxlopfx Abbsk Product contact material: V4A 1.4435 (AISI316) Condition: used Last application: pharmaceutical chemistry VESSEL Max. permitted operating temperature: 200 °C HEATING/COOLING JACKET Max. permitted operating vacuum: 1.0 bar Bottom temperature control: Half-pipe coil INSULATION Insulation jacket: riveted Insulation jacket material: aluminium EQUIPMENT Manway / Dome: in upper head (DN 600) Outlet: available Note: Dents in insulation jacket, manway cover plated MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Voltage: 400/690 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.17 mm Agitator arrangement: centrally positioned in upper head Agitator equipment: Gearbox housing slightly damaged in one area (see photos) Upper head wall thickness: 8.14 mm

Condition: good (used), Year of construction: 1989, Sawblade tiltable . ° cutting width .. mm Motor output . kW serial number . Credpfx Aboxzuy Sjbjk

Condition: used, tank capacity: 2,500 l, GENERAL Equipment: crane lugs Design: suspended Notes: 4 support brackets made from V2A; manhole cover fastening bolts incomplete; 1 former connection on the top head was welded shut by the previous operator Internal diameter: 1,390 mm Overall height: 3,000 mm Heating/cooling: available Max. permissible operating temperature: 190 °C Max. permissible operating overpressure: 3.0 bar Crodpfx Aboxqaw Ijbok Max. overpressure: 1.0 bar Agitator: beam agitator Agitator mounting: agitator flange Support type: brackets Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,500 liters Jacket volume: 35.0 liters Cylinder wall thickness: 5 mm Product-contacting material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,500 mm Last previous use: chemicals VESSEL Max. permissible operating temperature: 190 °C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Manhole / dome: on top head (DN 500) Discharge: flange DN50 Note: slight adhesions, motor/gearbox missing MATERIAL QUALITY Temperature control system material: V2A 1.4541 (AISI304) AGITATOR 2 Agitator arrangement: lateral on cylinder AGITATOR 1 Agitator manufacturer: Ekato Baffle: TECHNICAL DATA / DIMENSIONS Base wall thickness: 4.6 mm Agitator arrangement: eccentric in top head

Condition: used, tank capacity: 5,000 l, GENERAL INFORMATION Equipment: Ball valve Design: Suspended Remarks: Top cover made from V2A (1.4301); 4 support feet made of steel; minor material wear inside the vessel Internal diameter: 1,880 mm Total height: 3,550 mm Heating/Cooling: present Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top cover: Removable / hinged top cover Agitator type: Beam agitator Stand type: Feet Location: Bremen Cylinder temperature control: Half-pipe coil Nameplate: Volume: 5,000 liters Cylinder wall thickness: 10.2 mm Product-contacting material: V4A 1.4429 (AISI316) Condition: Used Cylindrical height: 1,580 mm Last application: Chemical industry HEATING/COOLING JACKET Bottom temperature control: Half-pipe coil EQUIPMENT Manway / Dome: On the top cover (Ø 450) Outlet: DN40 DIN 11851 Note: Light residues, motor/gearbox missing MATERIAL SPECIFICATION Top cover material: AISI304 (V2A) 1.4301 Temperature control system material: V2A 1.4301 (AISI304) Flange material: Steel Cjdpjxqawuofx Abbjrk AGITATOR 1 Agitator manufacturer: Fluid TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 8.3 mm Agitator arrangement: Centered in top cover Top cover wall thickness: 4.5 mm

Condition: used, tank capacity: 5,650 l, GENERAL Equipment: Lifting lugs Codexqah Hopfx Abbork Design: Suspended Remarks: Lugs made of steel; the insulation jacket has partially detached in the area of the lower base (see photos) Speed: 55.8 rpm Outer diameter: 2,100 mm Inner diameter: 1,800 mm Explosion-proof: Motor is explosion-proof (compliance with current ATEX guidelines under local conditions must be verified) Overall height: 3,750 mm Heating/Cooling: available Insulation: available Power: 2 kW Max. permitted operating temperature: 200 °C Max. permitted operating overpressure: 6.0 bar Max. excess pressure: 3.2 bar Mechanical seal: Mechanical seal with thermosiphon vessel Agitator: Beam agitator Support design: Feet Location: Bremen Cylinder tempering: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 5,650 liters Double jacket volume: 166.0 liters Product-contact material: V4A 1.4571 (AISI316) Condition: used Last intended application: Pharmaceutical chemistry VESSEL Max. permitted operating temperature: 200 °C Number of legs: 4 pieces HEATING/COOLING JACKET Bottom tempering: Half-pipe coil INSULATION Insulation jacket: bolted Insulation material: PU foam Insulation jacket material: galvanized steel EQUIPMENT Manhole/dome: in top head (DN 500) Outlet: 140 mm MATERIAL SPECIFICATION Tempering system material: V2A 1.4301 (AISI304) AGITATOR 1 Voltage: 220/380 Volt Agitator mounting: central in the top head Agitator equipment: Provisions for flow breakers inside the vessel (flat plates for flow breakers not present; see photos)

Condition: used, tank capacity: 60,000 l, GENERAL Equipment: Venting, spray head, crane lugs Design: Upright Outer diameter: 3,880 mm Inner diameter: 3,700 mm Total height: 9,200 mm Insulation: available Agitator: Beam agitator Base type: Skirted base Location: Outdoor storage Volume: 60,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last previous application: Food Csdpfx Abex Dmcqobsrk TANK Bottoms: Conical bottom EQUIPMENT Manhole / dome: in the shell AGITATOR 1 Bottom bearing: Agitator arrangement: eccentric on top head

Condition: used, Year of construction: 2006, tank capacity: 10,000 l, GENERAL INFORMATION Equipment: Crane lugs Design: Vertical Year of manufacture: 2006 Remarks: Nameplate no longer available; cylinder manhole diameter 600 mm; minor dent on the side of the vessel Internal diameter: 2,500 mm Total height: 3,800 mm Power: 3 kW Top head: Flat bottom Cjdpfx Absx Dmbaeberk Agitator: Beam agitator Support design: Height-adjustable feet Location: Outdoor storage Technical documentation: Drawing Volume: 10,000 liters Cylinder wall thickness: 3 mm Product-contact material: V4A 1.4401/04 (AISI316) Condition: Used Cylindrical height: 2,000 mm Last product processed: Sludge VESSEL Max. allowable operating temperature: 80 °C Specific gravity of medium: 1.8 (to/m³) Bottom head: Conical bottom Number of feet: 3 pcs EQUIPMENT Manhole/Dome: In cylinder, in top head (Ø 430 mm) Outlet: Flange DN80 Note: Minor residues MATERIAL SPECIFICATION Foot material: Stainless steel AGITATOR 1 Agitator manufacturer: Fluid Voltage: 380/660 volts TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4 mm Agitator positioning: Eccentric in top head