Used Beam Press for sale (32,071)

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, working length: 3,000 mm, working width: 2,030 mm, total width: 1,100 mm, total length: 3,300 mm, total height: 2,720 mm, table width: 120 mm, overall weight: 1,200 kg, Edge Press, Beam Type SCM Falcon/S Specifications: • Condition – Used, after inspection • Manufacturer – SCM • Model – Falcon/S • Maximum gluing dimensions – 300 x 203 cm • Remote control for pistons (independent vertical and horizontal control) • Double-T beams, 12 cm wide • Two vertical pistons with 60 mm diameter and two smaller horizontal pistons with 35 mm diameter • Maximum vertical piston pressure – approx. 15,000 kg • Maximum horizontal piston pressure – approx. 5,000 kg • Maximum pressure – 160 bar Fgedpfexn Tqvox Ad Nji • Pump motor – 3.0 kW • Year of manufacture – 2002 • Overall dimensions: 335 x 110 x 272 cm (L x W x H) • Weight – approx. 1,200 kg Additional information: • Very good, factory technical and visual condition • The photos shown represent the actual item for sale • Possibility to power up and inspect the machine on site.

Year of construction: 1993, condition: used, machine/vehicle number: 93 - 034, Beam press for gluing blocks, max. pressing dimension 2,240 x 880 mm, motorized height-adjustable counter bearings, 4 pressure beams, can be switched on and off individually, 4 pendulum grids, ex location Seevetal, Sold in "as is" condition as viewed, without transportation, subject to prior sale Fgsdpjul Uy Hofx Ad Nji

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: NON, travel distance X-axis: 13,000 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,300 mm, Product name: MHL13000 Single-Sided Vertical Squaring Machine Maximum processing length: 13,000 mm Maximum processing width: 1,300 mm Maximum processing thickness: 230 mm Rated pressure of the hydraulic system: 16 MPa Main pressure cylinder (cylinder diameter x stroke): φ100 x 100; 34 units in total Side pressure cylinder (cylinder diameter x stroke): φ50 x 150; 34 units in total Side lift cylinder (cylinder diameter x stroke): φ63 x 400; 8 units in total Fgjdpfjxgb Iaox Ad Nji Side pressure plate type: Single presser foot Hydraulic motor power: 5.5 kW Hydraulic system: Manual push-button control with pressure holding and automatic pressure compensation Dimensions: 13,300 x 1,300 x 2,300 mm Net weight: Approx. 15 t 1. Relief valve and electromagnetic directional valve: Zhenping Hydraulics 2. Oil pump and motor: Shanghai Volkswagen + Guangdong Juntai 3. Hydraulic cylinders and high-pressure oil lines: Zhengtian, hand-made, with stable quality and high durability 4. Cylinder seals: Taiwan Dingji (high-performance seals)

Condition: used, tank capacity: 1,000 l, GENERAL Design: vertical Remarks: Vessel flange made of Fe; manway cover plated Speed: 48.5 / 97 RPM Internal diameter: 1,200 mm Total height: 3,750 mm Heating/cooling: available Power: 4.5 / 5.5 kW Max. allowable operating temperature: 149 °C Max. allowable operating overpressure: 6.0 bar Max. excess pressure: 0.50 bar Top head: removable / hinged top head Agitator: blade agitator Support design: feet Location: Bremen Jacket temperature control: half-pipe coil Nameplate: Vacuum: 1.00 bar Volume: 1,000 liters Jacket volume: 80.0 liters Cylinder wall thickness: 3.9 mm Jacket material: V2A 1.4301 (AISI 304) Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 850 mm Fgedpfexqbawjx Ad Nsi Last application: chemical VESSEL Max. operating temperature vessel / °C: 143 °C Number of legs: 4 units HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Manway / dome: handhole Outlet (alternative entry): 85 mm MATERIAL SPECIFICATION Material legs: steel AGITATOR Agitator manufacturer: Ekato Voltage: 380 Volt Agitator positioning: centered in top head TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.3 mm Top head wall thickness: 5.1 mm

Condition: excellent (used), Pressure beam panel saw FIMAL CONCEPT 350 - used - Tiltable up to 46°, extendable angle stop up to 2,500 mm, digital display on the angle stop, mitre stop +/- 50°, automatic cutting length detection, stepless feed of the saw carriage, touchscreen, cutting line laser ----- Technical Data ----- Cutting length: 3,200 mm, Cutting width: 1,300 mm, Fgsdsxdl N Aspfx Ad Nji Max. cutting height: 100 mm, Saw unit feed rate max.: 0 - 40 m/min., Main saw motor output: 5 kW, Main saw blade Ø: 350 mm, Dust extraction port (bottom) Ø: 120 mm, Dust extraction port (pressure beam) Ø: 100 mm, Compressed air connection: 7 bar Quality Info: - complete basic inspection - complete basic cleaning - electrics checked - immediately operational

Year of construction: 2000, condition: good (used), Pressure beam for circular saw for clamping panels or veneers Fjdpstxirfjfx Ad Nsgi for 3 m sliding carriage

Condition: like new (used), Year of construction: 2020, Total Cutting Performance: 24,000 linear meters Cutting length: 4400 mm Air-cushioned machine table, version with stop ruler on the left Width stop / Cutting width: 3100 mm, with SL 4400 welded steel construction – absolutely stable and torsion-free, running on linear guides Angle air-cushion table and stop ruler: 1800 mm 2 air-cushion support tables: 1800 mm Additional air-cushion support table: 1800 mm (total of 4 tables) 4 feed rollers on the front side (1 per table), Part No. 5030631 Electrical system: Standard 400 V, 50/60 Hz Saw carriage: Cast version for SL 4400 Main saw motor: 7.5 kW, 400 V, 50/60 Hz Fgedpfxoxlthpj Ad Nsi Scoring unit motor: 2.2 kW with electric adjustment Automatic cutting length detection Motor-driven groove height adjustment Automatic / manual infinitely variable cutting height adjustment Quick-change clamping system: Pro-Lock Side alignment Single Press SL 4400, pneumatically and program-controlled Max. number of workpiece clamps: 9 workpiece clamps (6+3) for cutting length 4400 mm Operator console: CUTCONTROL 2 multitouch control system, 21.5" Full-HD screen, 16:9 format Manually operated device incl. stand Label printer and software Uninterruptible power supply (UPS) EASY-PLAN – Dongle version OPTI-CUT – Machine software Opti Pro – Office optimization software

Condition: used, tank capacity: 3,860 l, GENERAL Equipment: Lifting lugs Design: suspended Remarks: Support ring, Fe; manhole cover incomplete (see photos) Speed: 61 RPM Outer diameter: 2,090 mm Inner diameter: 1,800 mm Explosion-proof: Motor is explosion-proof (compliance with current ATEX regulations under local conditions must be verified) Total height: 3,050 mm Heating/Cooling: present Insulation: present Power: 4 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: paddle agitator Base type: ring Location: Bremen Fgsdpfexqaxlsx Ad Nei Technical documentation: drawings, various documents Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,860 liters Double jacket volume: 136.0 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4435 (AISI316) Condition: used Previous application: pharmaceutical chemistry VESSEL Max. operating temperature vessel / °C: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum double jacket / pipe chamber / bar: 1.0 bar Bottom temperature control: half-pipe coil INSULATION Insulation jacket: riveted Insulation jacket material: aluminum FEATURES Manhole / dome: on the top head (DN 600) Outlet: present Remark: dents on the insulation jacket, manhole cover plated MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR Voltage: 400/690 Volt Agitator arrangement: centrally mounted on top head Agitator specification: gearbox housing slightly damaged in one area (see photos) TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.17 mm Top wall thickness: 8.14 mm

Condition: excellent (used), Pressure beam saw HOLZ-HER 6210 CUT 85 -used- PC control with optimization, Fgsdpfxowz Rkco Ad Nsi scoring unit, automatic cut length detection, side pressure device, air cushion tables, feed rollers, stepless feed of the saw carriage, label printer ----- Technical Data ----- Cutting length: 4,250 mm, cutting width: 4,250 mm, max. cutting height: 85 mm, number of clamping claws: 7 pcs, number of trim stops: 3 pcs, main saw motor power: 11 kW, scorer motor power: 2.2 kW, main saw blade Ø: 350 mm, scorer saw blade Ø: 180 mm, extraction nozzle Ø bottom: 140 mm, extraction nozzle Ø at pressure beam: 2 x 120 mm, compressed air connection: min. 6 bar Quality information: - Saw spindle newly mounted - Scoring unit newly mounted - Complete basic inspection - Complete basic cleaning - Electrics checked - Immediately ready for operation

Condition: used, tank capacity: 2,500 l, GENERAL Equipment: Crane lugs Design: suspended Remarks: 4 feet made of V2A; manway cover fastening bolts incomplete; 1 former connection in the top head was welded shut by the previous operator Internal diameter: 1,390 mm Overall height: 3,000 mm Heating/Cooling: available Max. permissible operating temperature: 190 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 1.0 bar Agitator type: paddle agitator Agitator mounting: agitator flange Base type: feet Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,500 liters Jacket volume: 35.0 liters Cylinder wall thickness: 5 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Fodpexqaw Iofx Ad Negi Cylindrical height: 1,500 mm Last intended use: chemicals VESSEL Max. operating temperature vessel / °C: 190 °C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Manway / dome: in upper head (DN 500) Outlet: flange DN50 Note: light residues, motor/gearbox missing MATERIAL SPECIFICATION Temperature control system material: V2A 1.4541 (AISI304) AGITATOR Agitator manufacturer: Ekato Baffle: Agitator arrangement: eccentric in top head AGITATOR 2 Agitator arrangement: side-mounted on cylinder TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4.6 mm

Condition: used, tank capacity: 5,000 l, GENERAL Equipment: Ball valve Design: Suspended Remarks: Top cover made of V2A (1.4301); 4 support lugs made of Fe; Slight material erosion inside the tank Internal diameter: 1,880 mm Total height: 3,550 mm Heating/Cooling: available Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top cover: removable / hinged Agitator: beam agitator Stand design: support lugs Location: Bremen Cylinder temperature control: half-pipe coil Name plate: Volume: 5,000 liters Cylinder wall thickness: 10.2 mm Product-contacting material: V4A 1.4429 (AISI316) Condition: used Cylindrical height: 1,580 mm Last application: chemicals HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Manhole / dome: in top cover (Ø 450) Outlet: DN40 DIN 11851 Note: slight residues, motor/gearbox missing MATERIAL SPECIFICATION Top cover material: AISI304 (V2A) 1.4301 Fgjdpfx Adexqawuj Nji Temperature control system material: V2A 1.4301 (AISI304) Flange material: steel AGITATOR Agitator manufacturer: Fluid Agitator position: centrally in top cover TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 8.3 mm Top cover wall thickness: 4.5 mm

Condition: used, tank capacity: 550 l, GENERAL INFORMATION Design: Vertical Outer diameter: 890 mm Inner diameter: 650 mm Total height: 2,300 mm Heating/cooling: available Insulation: available Max. allowable operating temperature: 135 °C Max. allowable operating overpressure: 2.0 bar Max. overpressure: 3.0 bar Fsdpfoxqaqnox Ad Njgi Top head: Removable / hinged top head Agitator: Beam agitator Support type: Feet Location: Bremen Cylinder temperature control: Double jacket Nameplate: Volume: 550 liters Double jacket volume: 67.0 liters Product-contacting material: V4A 1.4571 (AISI316) Condition: used Last application: Pharmaceutical TANK Max. operating temperature of tank / °C: 135 °C Number of feet: 4 pcs HEATING/COOLING JACKET Bottom temperature control: Double jacket INSULATION Insulation jacket: Hermetically welded Insulation jacket material: Stainless steel EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATIONS Temperature control system material: V2A 1.4301 (AISI304) Feet material: Stainless steel AGITATOR Flow breaker: Agitator arrangement: Centered in the top head Agitator details: Agitator data not legible

Condition: used, tank capacity: 19,600 l, GENERAL Equipment: Spray head, crane lugs Design: upright Remarks: Presumably 3 cooling coils around the cylinder; heating connections have been cut off; one former manway in the lower cylinder area was welded shut by the previous operator; feet were cut off during tank removal and are supplied loose (with minor dents; see photos) External diameter: 2,900 mm Internal diameter: 2,700 mm Overall height: 5,000 mm Heating/cooling: available Insulation: available Max. overpressure: 3.0 bar Agitator: blade agitator Support design: adjustable feet Location: Bremen Nameplate: Vacuum: 0.9 bar Volume: 19,600 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,900 mm Previous use: dairy TANK Number of feet: 4 pieces HEATING/COOLING JACKET Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manway / dome: on top cover (DN 500) Discharge: present Discharge (alternative entry): 65 mm Note: Pressure marks on the insulation jacket, discharge end cut off MATERIAL CHARACTERISTICS Fgjdpfxsxqante Ad Nji Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR Agitator manufacturer: Stelzer Bottom bearing: Agitator arrangement: offset in top cover Agitator equipment: Agitator data not readable; motor/gear unit with signs of corrosion

Condition: used, tank capacity: 5,530 l, GENERAL INFORMATION Equipment: spray head, crane lugs Design: vertical Remarks: Double jacket probably with sprinkling ring – suitable only for non-pressurized temperature control; welding of the double jacket in the upper area has partially come loose; outlet diameter 65 mm (tapering to approx. 50 mm towards the tank); small dents inside the tank; heating connections cut off Speed: 15.5 / 31 rpm External diameter: 1,660 mm Internal diameter: 1,550 mm Total height: 4,350 mm Heating/cooling: available Power: 0.8 / 1.6 kW Max. pressure: 3.2 bar Agitator: paddle agitator Support design: height-adjustable legs Location: Bremen Cylinder tempering: double jacket Nameplate: Vacuum: 1.0 bar Volume: 5,530 liters Product contact material: V2A 1.4301 (AISI 304) Condition: used Cylindrical height: 2,500 mm Last application: dairy TANK Fjdpfx Aexqamcjd Njgi Max. operating temperature / °C: 145°C Number of legs: 4 HEATING/COOLING JACKET Underside tempering: double jacket FEATURES Manway / dome: on top (Ø 450 mm) Outlet: available Note: outlet pipe cut off MATERIAL SPECIFICATION Material tempering system: V2A 1.4301 (AISI 304) Material legs: stainless steel AGITATOR Voltage: 380 Volt Bottom bearing: Agitator arrangement: eccentric in the top head

Condition: used, tank capacity: 5,650 l, GENERAL Equipment: Crane lugs Design: Suspended Comments: Lugs made of Fe; insulation jacket partially detached in the area of the lower bottom (see photos) Speed: 55.8 rpm Outer diameter: 2,100 mm Inner diameter: 1,800 mm Ex-protected: Motor is ex-protected (compliance with applicable ATEX directives under local conditions must be verified) Overall height: 3,750 mm Heating/cooling: available Insulation: available Power: 2 kW Max. allowable operating temperature: 200 °C Max. allowable operating overpressure: 6.0 bar Max. overpressure: 3.2 bar Mechanical seal: Mechanical shaft seal with thermosyphon vessel Agitator: Beam agitator Support design: Lug mounting Location: Bremen Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 5,650 litres Double jacket volume: 166.0 litres Product-contacting material: V4A 1.4571 (AISI316) Condition: used Last application: Pharmaceutical chemistry TANK Max. operating temperature tank / °C: 200 °C Number of feet: 4 pcs HEATING/COOLING JACKET Lower bottom temperature control: Half-pipe coil INSULATION Insulation jacket: bolted Insulation material: PU foam Insulation jacket material: Galvanised steel EQUIPMENT Manway / dome: in top head (DN 500) Outlet (alternative entry): 140 mm MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Fodsxqah Hepfx Ad Njgi AGITATOR Voltage: 220/380 Volt Agitator arrangement: centred in top head Agitator equipment: Mounts for flow breakers inside the vessel (flat plates of the flow breakers not present; see photos)

Condition: used, tank capacity: 1,500 l, GENERAL Design: vertical Fgedpfx Asxqahyod Nsi Heating/cooling: available Insulation: available Max. allowable operating temperature: 145 °C Max. allowable operating overpressure: 4.0 bar Max. overpressure: 3.5 bar Agitator: beam agitator Base design: feet Location: outdoor storage Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 1,500 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last previous use: milk VESSEL Max. operating temperature of vessel / °C: 145 °C EQUIPMENT Manhole/dome: in the top Outlet: available

Condition: used, Pujolas Ham Press Fgodpjwd Nufofx Ad Noi Model PF 4004

Condition: used, Year of construction: 2025, total length: 1,200 mm, total width: 800 mm, total height: 1,800 mm, Empty weight: 450 kg Price: On request Fsdpfxjxixrho Ad Njgi - Year: 2025 - Documentation available: Yes - CE marking present: Yes - Serial number: PB12093N2025005 - Operating hours: 0 - Control: Conventional - Motor power: 1.5kW - Capacity: 50mm - Model: fielbuiger - Shaft diameter: 155mm - Transport dimensions: 1200mm x 800mm x 1800mm (l x w x h) - Transport weight [kg]: 450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, With this offer, you are purchasing a used ‘Xerox Versant 80 Press’ colour production system. Item for sale: 1 x Xerox Versant 80 Press with the following equipment: Includes Fiery Server Pro 80 Includes Paper Deck A-CF01 Includes Booklet Finisher LFN-7 Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 1,178,231 pages Colour: Approx. 840,272 pages Black: Approx. 337,959 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Fgsdpfx Ajxnx Eljd Nei A test printout can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: used, Year of construction: 2025, total length: 1,300 mm, total height: 1,400 mm, total width: 800 mm, Empty weight: 800 kg Price: On request - Year: 2025 - Documentation available: Yes - CE marking present: Yes - Serial number: HB10011N2025006 - Operating hours: 0 - Control: Teach-in - Motor power: 4.0kW - Table width: 550mm - Table length: 300mm - Model: Hydraulic - Max. stroke: 180mm - Power: 28.0ton - Transport dimensions: 1300mm x 800mm x 1400mm (l x w x h) Fgedpfxsxixruo Ad Nji - Transport weight [kg]: 800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Xerox Versant 3100 Press’ colour production system. Item for sale: 1 x Xerox Versant 3100 Press with the following equipment: Includes Fiery NX Premium Server graphic arts package Includes Fiery connectivity with FreeFlow Includes Paperdeck A-CF03 Includes Stacker LCS-1 Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Fedpfx Adoxnxwuo Negi Total: Approx. 3,926,059 pages Colour: Approx. 3,581,579 pages Black: Approx. 344,480 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: used, Year of construction: 2025, total height: 2,100 mm, total width: 800 mm, total length: 2,200 mm, Empty weight: 1.145 kg Price: On request - Year: 2025 - Documentation available: No - CE marking present: Yes - Serial number: PPW10061N2025009 - Motor power: 3.0kW - Table width: 300mm - Throat depth: 1500mm - Table length: 1500mm - Ram width: 120mm - Ram length: 120mm - Model: Hydraulic - Max. stroke: 380mm - Number of columns: 2 - Height adjustment: 750mm - Power: 100.0ton - Transport dimensions: 2200mm x 800mm x 2100mm (l x w x h) - Transport weight [kg]: 1145kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Fodpfx Adoxb Scwo Nsgi Lukas van Rossum

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Xerox Versant 180 Press’ colour production system. Item for sale: 1 x Xerox Versant 180 Press with the following equipment: Includes FreeFlow Server Includes Paperdeck A-CF03 Includes Booklet Finisher A-FN13 Includes SquareFold Unit SQF-104 Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 267,310 pages Colour: Approx. 253,808 pages Black: Approx. 13,502 pages Fodsxnlbmjpfx Ad Nsgi Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: used, Year of construction: 2025, total height: 2,200 mm, total width: 800 mm, total length: 1,100 mm, Empty weight: 540 kg Price: On request Movable pressing-cylinder Fgsdpfxsw N St Hj Ad Nsi - Year: 2025 - Documentation available: Yes - CE marking present: Yes - Operating hours: 0 - Motor power: 2.2kW - Table width: 260mm - Throat depth: 750mm - Table length: 1000mm - Ram length: 100mm - Model: Hydraulic - Max. stroke: 380mm - Number of columns: 2 - Height adjustment: 750mm - Power: 60.0ton - Transport dimensions: 1100mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 540kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2025, total height: 2,200 mm, total width: 800 mm, total length: 1,450 mm, Empty weight: 970 kg Price: On request Movable Press-Cylinder Fgsdpfx Asw N Su Ded Noi - Year: 2025 - Documentation available: Yes - CE marking present: Yes - Operating hours: 0 - Motor power: 3.0kW - Table width: 300mm - Throat depth: 1100mm - Table length: 1500mm - Ram length: 100mm - Model: Hydraulic - Max. stroke: 380mm - Number of columns: 2 - Height adjustment: 750mm - Power: 100.0ton - Transport dimensions: 1450mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 970kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum