Used Banding Machine for sale (64,539)

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips/lippings (Min/max) mm 3 / 10 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 236 / 3300 Numerical Control /Software ICOS Open Adjustable feeding speed (m/min ) 10 - 50 - Without Transmission bar (Master & Slave system) Distance (center-axes) of the Disappearing Dogs (mm) 1080 SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x kW 8) Free Space (for Milling unit) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue) 04.1570 + 283.205 Band Pressure zone - Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) speed 30 m/min (0° - 25) Fine Trimming unit 08.055 (2 x Kw 1) / 0° - 30° Gjdpsd Nt Rqefx Afnsin Multi Function Unit (Profile contour Trimming unit) 08.342 (2 x Kw 0,66) with servo-motors Profile edge scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-4 (4 x Kw 0,18) Milling grooving unit 08.190 (1 x Kw 4,5) 90°-180°-270°

Condition: reconditioned (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 Working width (min/max) mm 236 / 1300 Numerical Control /Software ICOS Open Adjustable feeding speed (m/min ) 10 / 50 Without Transmission bar (Master & Slave system) Safety and sound-proof enclosures/cabins SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Milling Unit (vertical Joint Trimmers) 08. 0555 max. 3° (2 x 1 kW) Free space EDGE-BANDING PART (for each side): Giodpfxsdh Tfge Afnsn Glueing Unit (Hot Melt Glue + Quick Melt system) 04.1570 Band Pressure zone Edge coils supporting unit (reels N°) 6 Rough Trimming unit 08. 0555 (2 x 1 kW) max. 3° Fine Trimming unit 08. 055 (2 x 0,66 kW) 30° + 30 m/min Glue scraping unit 08.517 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (2 x 0,18 kW) Free space

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station with 2xMotors , HF-top and bottom milling unit, corner rounding unit, chain feed, double roller top pressure, extendable work piece support, signal lamp for work piece sequence and synchronisation of working units by encoder. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0/6.0 mm and of 8 – 60 mm work piece thickness. Speed: 10,0 m/min.; 8,0 m/min. with corner rounding • 3 spaces for finishing units • 10“ Colour Touch screen Giodpfol Rix Nox Afnjn →Automatic edge feeding for roller material over turntable D = 800 mm →Longer infeed lineal (650 mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR gluepot with run out / cleaning function for quick change of glue →Pneumatically operated cut-off knife from roll material up to 3mm edge thickness →Automatic feeding magazin (70mm magazin capacity) with spiked roller for solid wood →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and two of smaller diameter, conical, one positive and one negative pressure roller with spring tension for a nearly invisible joint of the edge material with the work piece , adjustment of the pressure unit with digital readout. →High-frequency cut-off saw equipped with 2xHF motor 0.55 kW, 12,000 rpm, 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.55 kW high-frequency motors with HM-WPL special millers; suitable for radius, bevel and flush milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Corner rounding unit : Automatic processing of corner edges up to 2 mm edge thickness. Equipped with one high frequency motor 0, 27 kW, selectable on operating panel. One side (front or back edge) or both side corner rounding unit. →Rotatable control panel with 10“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis, incl. digital Meter counter Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts. →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of th

Condition: as good as new (ex-display), Year of construction: 2025, 67641340dc13f Giodpfx Afsl Rix Esnsn

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces, end trimming station with VR function , HF-top and bottom milling unit, chain feed, double roller top pressure and extendable work piece support. For ABS and PVC roll material as well as fixed lengths from 0.4 – 2.0 mm and of 8 – 50 mm work piece thickness. • Speed: 5,5 m/min. • 2 spaces for finishing unit • 5,6“ Colour Touch screen →Automatic edge feeding for roller material over turntable D = 600 mm →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material Godpfx Afjip Uzpjnein →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak-proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer period and is still turned on) →Pneumatically operated cut-off knife from roll material up to 2 mm edge thickness →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and one adjustable pressure roller with spring tension for a nearly invisible joint of the edge material with the work piece →End trimming station for front-and back egde with HF-Motor 0,27 KW /12000 U/min ,milling head with interchangeable knives and VR Function for vertical rounding . Automatic setting from workpiece, with dust collector system →High-frequency top and buttom milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special millers; suitable for radius and bevel milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods, height adjustment of the upper aggregate with the top roll pressure →OMRON 5,6“ colour touchscreen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis Additional finish aggregates (1 free space): →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface →Buffing unit : 2 motors 0,09 kW, 1,500 rpm provide a super-finish for ABS and PVC edge material 67641340ec347

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station, HF-top and bottom milling unit, chain feed, double roller top pressure, extendable work piece support and signal lamp for work piece sequence. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0 mm and of 8 – 50 mm work piece thickness. Speed: 7,0 m/min. • 2 spaces for finishing units • 7,0“ Colour Touch screen →Automatic edge feeding for material over turntable D=600 mm →Infeed lineal (400mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR glue pot with run out / cleaning function for quick change of glue. →Pneumatically operated cut-off knife from roll material up to 3 mm edge thickness →A group of two rollers exerting pressure on the edge band mechanically in order to achieve its adhesion onto the panel edge. The first roller is driven and the smaller second one is idle. Adjustment of the pressure rollers with mechanical SIKO display →High-frequency cut-off saw equipped with HF motor 0.21 kW, 12,000 rpm , 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special millers; suitable for radius and bevel milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Rotatable control panel with 7,0“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis →LED lights →Optional : Riepe non-stick spray station and Riepe cleaning spray station Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts Gjdpfed R U Acox Afnein →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface →Buffing unit : 2 motors 0.05 kW, 1,500 rpm provide a super-finish for ABS and PVC edge material 67641340eaae3

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station, HF-top and bottom milling unit, Corner rounding unit, chain feed, double roller top pressure, extendable work piece support and signal lamp for work piece sequence. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 –3.0 mm and of 8 – 50 mm work piece thickness. Speed: 7,0 m/min. • 2 spaces for finishing units • 10,0“ Colour Touch screen →Automatic edge feeding for material over turntable D=600 mm →Infeed lineal (400mm) Godpfjd R U Adex Afnjin →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR glue pot with run out / cleaning function for quick change of glue. →Pneumatically operated cut-off knife from roll material up to 3 mm edge thickness →A group of two rollers exerting pressure on the edge band mechanically in order to achieve its adhesion onto the panel edge. The first roller is driven and the smaller second one is idle. Adjustment of the pressure rollers with mechanical SIKO display →High-frequency cut-off saw equipped with HF motor 0.21 kW, 12,000 rpm , 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special millers; suitable for radius and bevel milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Corner rounding unit : automatic processing of corner edges up to 2 mm edge thickness. Equipped with one high frequency motor 0, 27 kW, selectable on operating panel →Rotatable control panel with 10,0“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis →LED lights →Optional : Riepe non-stick spray station and Riepe cleaning spray station Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface →Buffing unit : 2 motors 0.05 kW, 1,500 rpm provide a super-finish for ABS and PVC ed 67641340e9686

Condition: excellent (used), Year of construction: 2013, operating hours: 189 h, Fam Lifis is a vegetable slicer (plastrownica) with a capacity of over 5 tons per hour. The machine is in very good condition with one head. Gsdpfx Afswyc Rfjnjin

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 2459, functionality: fully functional, Machine in very good condition - Very user-friendly control panel - Minimum workpiece width approx. 80 mm - Minimum workpiece length approx. 200 mm - Feed rate approx. 10 m/min - Transport chain with firmly bolted special chain plates - Double roller top pressure - Machine length 4,300 mm Gjdsx Ahmuopfx Afnjin - Machine width 1,400 mm - Weight approx. 1,250 kg - Extendable workpiece support at the front - Automatic central lubrication for cross-cut saw & corner milling unit - Melt glue container with Teflon coating (very low maintenance) - Ready for operation after approx. 5-6 minutes - Jointing unit - Pneumatic trim roller cutter - Direct glue application to the workpiece - Trimming unit for front & rear edges - Flush/chamfer/radius milling unit - Corner rounding - Surface scraper with dual sensing

Condition: used, Year of construction: 2015, functionality: fully functional, BIESSE Edge Banding Machine AKRON 1440-A Automatic single-sided edge banding machines for gluing and processing straight edges with roll material (melamine, PVC, ABS, veneer) and strip material (solid wood, laminate, sliced veneer, etc.) • NC control with touch display • Automatic start of aggregate motors • Direct selection for second pass • Operating data acquisition • Software-guided maintenance Godexzb Iijpfx Afnsin TECHNICAL DATA Workpiece thickness 10-60 mm Workpiece thickness with MFU aggregate (depending on profile) 10-35/60 mm Edge height 14-64 mm Edge thickness – roll material 0.4-3 mm Edge thickness – strip material (*) 0.4-10 (12) mm Workpiece overhang 25 mm Minimum panel length 140 mm Minimum width (at 140 mm length) 85 mm Minimum width (at 250 mm length) 50 mm Feed speed 12 m/min Dust extraction* 8x connection Ø100 mm Compressed air connection 7 bar Glue pot capacity 2 (approx.) kg * Depending on selected aggregates. - GLUING UNIT VC-511 Applies the hot-melt adhesive to the workpiece, feeds the edge to the workpiece, automatically cuts it from the roll, and presses it onto the workpiece, guaranteeing perfect positioning. - END TRIMMING UNIT IN-801 For trimming the front and rear edge overhangs with 0° to 15° angle. - 2-MOTOR MULTIFUNCTIONAL PROFILE MILLING UNIT AR02 E For corner rounding and profile milling of workpiece edges made of synthetic material up to a thickness of max. 3 mm. JOINTING CUTTER UNIT RT02 Joins the workpiece before glue application. Equipped with two 1.8 kW high-frequency motors at 12,000 rpm. SCRAPER UNIT RB02 For post-processing thick PVC/ABS edges. FLAT SCRAPER RC02 Aggregate for removing excess glue in the edge-to-panel area. Equipped with tracing rollers and a flat knife with engagement control. BUFFING UNIT SZ02 For cleaning and buffing the workpiece edge using fabric polishing discs. The unit automatically adapts to the workpiece thickness. ANTI-ADHESIVE SPRAY UNIT ADZ02 Precision application of anti-adhesive using injectors activated by numerical control. KIT PRO-GLUE The PRO-GLUE kit includes the following components: • TEKNO-GLUE system for optimal gluing through: - controlled pressure of the glue roller - automatic disengagement in case of feed stop - automatic ON/OFF of the glue unit • REVERSE system to switch the glue roller for co- or counter-rotation Electrical and mechanical preparation for the use of special glue pots for POLYURETHANE glue with machines equipped for EVA gluing. NC Axis for Fine Trimming Unit Kit for the automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system. Pair of multiprofile cutters for the fine trimming unit: 25-degree bevel, radius 2 mm + radius 1 mm plus straight profile for solid wood. NC Axis for Profile Milling Unit Kit for automatic adjustment of the tracer to match the edge thickness. Adjustment takes place via the control system. Function for processing only on the corners. NC Axis for Scraper Unit Kit for automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system.

Condition: good (used), Year of construction: 2020, machine/vehicle number: 020313L, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, pressure: 7 bar, Description: Solid steel construction for high machine stability. Workpiece feed via sliding transport chain with plastic plates. Upper pressure fitted with two rows of rubber-coated rollers. Manual adjustment of upper pressure with automatic positioning of the units according to the changed workpiece thickness. Mechanical digital display of panel thickness. PLC for on/off control of the motor and glue pot. Glue pot with standby function for temperature control. Start/stop function for all motors. End trimming unit for 3 mm edging rolls. Support tray for edging rolls with up to 800 mm diameter. Central dust extraction. Roller rail as workpiece support along the entire machine. Safety cover over all processing units. Control panel, including emergency stop and lockable main switch. Transformer for 24V auxiliary circuit. Jointing milling unit before the gluing section, for preparing the workpiece edge for adhesive application. With adjustable infeed fence. Maximum material removal 2 mm. 2 motors at 1.1 kW each, 12,000 rpm, max. material removal 2 mm, extraction port Ø 120 mm, incl. 2 WIDIA cutting tools. Gluing section for hot-melt adhesive with fast heating and adhesive application roller. System for temperature control and recycling of excess hot-melt adhesive. Power requirement 3.5 kW, capacity 1.5 kg, heating time approx. 15 min., depending on ambient temperature and adhesive. End trimming unit With 1 saw blade for trimming front and rear edge overhangs at a 90° angle, flush to the workpiece. Trimming for the front and rear overhangs can be controlled individually as needed. Motor: 0.35 kW. Saw blade speed: 12,000 rpm. Gjdoxn Hzbspfx Afnjin Flush milling unit With 2 motors for milling a radius or chamfer on the top, bottom, and/or front edge. Vertical and horizontal motor adjustment on hardened steel guide rails and ball bearings. Three manually adjustable positions for different edge thicknesses. Motor not tiltable. Unit complete with WIDIA cutting tools 2/3 mm. 2 motors, 0.55 kW each, 12,000 rpm. Diamond cutting tools, 68mm Z6, R=2. Profile scraper knife Flat scraper knife Buffing unit Technical data: Edging strip thickness (manual feed) max: 5x45 mm Pre-milled panel thickness: 10 - 40 mm Unmilled panel thickness: 10 - 60 mm Max. height melamine edging: 65 mm Max. height ABS edging: thickness 0.4-2 mm = 65 mm; thickness 2-3 mm = 40 mm Max. edge overhang top/bottom: 2 mm each Minimum workpiece width with roll material: 90 mm Minimum workpiece length with roll material: 160 mm Adhesive temperature: 190°-210° Feed speed: 8 m/min Inverter: 200 Hz Compressed air: 7 bar Extraction nozzle Ø: 2x 60 mm CE standard

Condition: used, Year of construction: 2024, functionality: fully functional, One-sided edge banding machine with NC-controlled adjustment via 18-inch touchscreen (L-Motion) Edge material: - Roll stock 0.4 - 3 mm - Solid wood strips up to 5 mm Workpiece thickness: 10 - 60 mm Minimum workpiece length: 120 mm Minimum workpiece width: 75 mm Minimum workpiece width with corner copying: 170 mm Feed speed: 16 m/min With corner copying: for thicknesses 16, 18 & 19 mm, feed speed 12 m/min Aggregate equipment: RIEPE separating agent application Jointing milling unit with 2 counter-rotating, demand-controlled motors, equipped with diamond-tipped spiral cutterheads Extra: Diamond milling tools, 65 mm height instead of 30 mm Automatic edge feeding with swiveling reel table, diameter 800 mm, with automatic strip magazine, spiked roller for solid wood strips Glue pot with automatic temperature control and stand-by function; glue roller temperature adjustable separately, capacity approx. 1.5 kg Extra: Glue run-out function, Teflon-coated drip tray, customized software for EVA/PU glue Extra: Quick-change glue pot system Pressure zone with 1 powered main pressure roller and 2 free-running follow-on rollers End trimming unit with 2 HF motors, 0.55 kW, pneumatically tiltable 0 - 10 degrees, controlled from the operator panel Combined milling station with 2 HF motors, 0.55 kW, 12,000 rpm L-Motion multifunction tool (straight & 3 different radii), horizontal & vertical tracing, motorized positioning via controller Extra: nesting package for combined milling unit Godpfx Afsxugplonoin Corner copying milling unit with 2 motors. Automatic processing of end edges up to 2 mm edge thickness (not recommended for soft- & postforming profiles) with 2 motors, 0.27 kW each 2 L-Motion motors for positioning the horizontal tracing shoes, plus tool positioning Radius scraper with L-Motion multifunction tool (3 different radii), motorized adjustment with 3 L-Motion motors Extra: nesting package for radius scraper Flat scraper unit with pneumatic in/out control from the operator panel RIEPE cleaning agent spray device Buffing unit with 2 motors, 0.09 kW each Control system: 18.5-inch graphic touchscreen with L-Motion software Extra: potential-free contact for connection to a return conveyor Total machine length: 4,890 mm The machine is being replaced due to insufficient capacity The return conveyor system visible in the photos is not included in the scope of delivery.

Condition: new, Year of construction: 2026, The BS370H is a powerful and reliable semi-automatic band saw with miter cuts from -45° to +60° and a hydraulically controlled vice and saw arm. The machine is irreplaceable in every locksmith's workshop and is ideal for cutting pipes, profiles and solid materials. The belt guides are equipped with special carbide plates and bearings. This has a huge impact on belt guidance, belt life, straightness, accuracy and cut quality. The carbide guide greatly reduces machine and saw blade wear. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The drive of the machine is transmitted via a worm gear. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The cutter is equipped with a strain gauge - a tape tension sensor and an automatic switch-off in the event of the cutting tape breaking. The shape of the upper part of the base is a tub for draining the coolant and catching chips formed during the cutting of the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the moving of the cutting band and the arm's lowering feed. The speed of the arm's descent (cutting speed) is regulated by a hydraulic cylinder. Cutter for precise, professional work. Torsion-resistant, rigid ductile iron arm and saw body. Double sided quick lock vice In semi-automatic mode, after pressing START, the hydraulic vise will clamp the material, the hydraulics will lower the saw arm, the limit switch will give the signal to finish cutting and the hydraulics will raise the saw arm. Technical parameters Size of the cutting band 3160 x 27 x 0.9 mm Gsdpfoycqhcox Afnjin Belt tension mechanical (manual) Belt speeds 34.68 m / min Arm Drop Adjustment stepless - hydraulic cylinder Height of vice base 890 mm Diameter of saw wheel 380 mm Power 3phase, 400V Main engine power S1- 1,5/S6 -1,9kW Cooling pump motor power 46W Dimensions with base 1850x950x1500 (2050) mm Weight 491 kg

Condition: new, Year of construction: 2026, CORMAK BS320H is a robust, industrial semi-automatic metal band saw designed for efficient cutting of steel and large cross-section workpieces. It is a professional semi-automatic band saw that performs perfectly in manufacturing plants, metalworking shops, tool rooms, and maintenance departments—anywhere repeatability and high productivity matter. The BS320H model operates as a universal metal band saw as well as an efficient band saw for pipes and profiles. It easily handles cutting bars, profiles, sections, channels, angles, and pipes, delivering a clean cutting line and smooth operation. It belongs to a class of machines chosen by customers as reliable and durable metal band saws for everyday use. Key advantages of the CORMAK BS320H Semi-automatic cutting cycle – operator comfort, reduced workload, and high repeatability in series production. Wide cutting capacity – cutting of workpieces up to 320 × 195 mm, ensuring efficient workshop and production use. Rigid, stable construction – reduced vibration, improved cutting accuracy, and extended blade life. Ideal for cutting pipes and profiles – precise cuts with minimal burrs and no material overheating. Designed for intensive operation – reliable performance in manufacturing companies and steel cutting services. Applications The CORMAK BS320H metal band saw is recommended for: manufacturing plants and structural fabrication companies (profiles, sections, steel components), metalworking shops and tool rooms, maintenance departments, steel cutting services (repeatable series), cutting pipes and profiles as a dedicated band saw for pipes and profiles. Why choose this band saw? If you are looking for a reliable machine for daily operation, the CORMAK BS320H is a proven semi-automatic metal band saw that increases productivity, improves repeatability, and allows faster job completion. It is one of those machines that genuinely reduces labor costs thanks to predictable, stable operation. Technical specifications Type: Semi-automatic band saw Arm lifting/lowering: Hydraulic, infinitely variable Blade speed: 37.5 / 75 m/min Miter cutting range: from −45° to +60° Vise: Hydraulic Minimum cutting diameter: Ø 5 mm Minimum clamping length: 30 mm Vise base height: 950 mm Blade size: 27 × 0.9 × 2680 mm Total power: 1.5 kW Gsdoychwnopfx Afnjin Dimensions (L × W × H): 2000 × 860 × 1500 mm Weight: 250 kg

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, workpiece height (max.): 40 mm, workpiece length (max.): 2,500 mm, edge thickness (max.): 3 mm, workpiece weight (max.): 50 kg, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Workpiece thickness: 12 - 40 mm Minimum workpiece size (L x W): 250 x 240 mm Maximum workpiece size (L x W): 2,500 x 1,200 mm Maximum workpiece weight: 50 kg Edging material (roll stock) - Material thickness: 0.4 - 3 mm Maximum edge cross-sectional area (plastic): 135 mm Maximum edge cross-sectional area (veneer): 100 mm Maximum roll diameter: 830 mm Longitudinal processing speed: up to 35 m/min for thin edging up to 0.6 mm Longitudinal processing speed: up to 30 m/min for thick edging up to 3 mm Cross processing speed: up to 30 m/min for panel sizing Cross processing speed: up to 20 m/min for edge processing Minimum distance between workpieces: 500 mm MACHINE DETAILS Connected load: 6.6 kW (double planer longitudinal/cross) Standard milling unit: 6.6 kW EQUIPMENT Top/bottom separating agent spray unit Glue application unit A3 with 2 rollers Profile milling unit FF12 top/bottom with motors 12,000 rpm Finishing unit FA11 top/bottom Steplessly adjustable positioning cams with a maximum cam stroke of 25 mm Pre-milling unit: 0.55 kW PUR OTT 2-kg melting station Gedsx Ezz Hepfx Afnjin

Condition: used, Band saw shaping machine Vollmer CAS L Feed from left to right with support frame Auxiliary feed Godpfxjcvhubo Afnsin very good condition

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, 4-axis CNC machining center with console table and edge banding unit Manufacturer: IMA Model: BIMA 400 V Year of manufacture: 2009 8 manually adjustable supports in X-axis, 3 vacuum pods per console, Vacuum pump 100 m³/h -2* Vacuum connection for templates Giodpfjxrltksx Afnen LED display for pod position indication Working area X: 200 – 6150 mm Working area Y: 0 – 1600 mm (milling/drilling), with edge banding 1525 mm Working area Z: 12 – 125 mm (clearance 150 mm) 14 vertical drilling spindles Horizontal drilling and grooving saw unit, swiveling 90° Milling spindle 11 kW / 7.5 kW up to 24,000 rpm With C-axis, 360° interpolation, liquid circulation cooling – 18-position tool changer, traveling with y-support Edge banding unit VT 100, 4-sided/all-round – rotation range 740 degrees With dual roller magazine, automatic granulate feeding Adapter units: – Saw, fixed at 90° – 5-axis saw/drill/milling unit Vario NC – Horizontal cutter (corner notching) – Flush trimming and profile scraping blade with extension for flat scraper ICOS open control system with 17" TFT ImaWop 6.0 incl. MDE and production list software Chip conveyor Side safety fencing and front safety mats; Rear: requires wall placement or separate safeguarding

Year of construction: 2023, condition: new, The stationary mitre band saw machine for universal use. Function: - manual or semi-automatic Design: - Solid cast saw frame - Saw frame can be swivelled over the material - Robust vice with quick clamping lever - Large cutting range - Saw band guides made of steel with ball bearings - Chip clearing brush - Hydraulic display of saw band tension - Electric coolant device Technical data: - Mitres from 0° to 60 - Cutting speed 45 and 90 m/min. Gjdpfog Hy Tqox Afnjin - Machine weight 200 kg - Saw drive 1,1 kW - Saw blade dimension 2480x27x0,9 mm Cutting range at 90 Ø 225 or 240x160 or250 x110 mm

Condition: used, Year of construction: 2007, machine/vehicle number: Werksüberarbeitungsnummer: WÜA1363DK-F7560, Used Machine GM020.0068 AKV 3003 DK - F Year of manufacture: 2007 Gijdpfxsw Nih Ie Afnon Specification: 3 mm 1st milling station: Combination Surface pull scraper with extraction Chassis Pneumatic milling adjustment Limit switch lever, 7.5° inclination

Condition: used, Year of construction: 2005, machine/vehicle number: Werksüberarbeitungsnummer: WÜA920DK-F12960, Used machine GM020.0029 Year of manufacture: 2005 AKV 3005 DK-F 8 mm version 1st milling station: Combination Giedpfew In R Eox Afnen Cleaning station Corner rounding cutter Jointing cutter Surface scraper with extraction Profile scraper Chassis Pneumatic milling adjustment SPS control Preparation for interchangeable tanks

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Features and technical specifications: The machine has been completely overhauled: - New Glue Jet 301 adhesive system (top section 1 mm) - All units checked - All cutters sharpened - All knives replaced Feed speed: 10 - 18 m/min Workpiece length: min. 160 mm Workpiece width: min. 60 mm Giedpfx Aswka Iiofnsn Workpiece thickness: 8 - 60 mm Edge thickness: 0.4 - 8 mm Electrical for stepless feed: 400 V / 50 Hz, 2.2 kW Motorized pressure bridge adjustment Automatic chain lubrication PPC 315 control with 15" touchscreen ECO MODE energy saving mode Entry fence 1350 mm, motorized adjustment Jointing unit 1802: - 2 x 2.0 kW, 200 Hz, 12,000 rpm with 2 milling units for jointing the panel edge - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left-hand rotation for jointing unit - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right-hand rotation for jointing unit Edge feeder 1901 fully automatic Glue application station Glu Jet GJ301 automatic: - 2.3 kW; 50 Hz - Granulate hopper Pressure unit 1913 MOT End trimming unit 1918 (60 mm) pneumatic Multifunction milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm left-hand rotation - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm right-hand rotation Profile milling unit 1833 MOT4: - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, left-hand rotation with CM technology - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, right-hand rotation with CM technology Scraper unit 1929 MOT2: - Carbide reversible plates for scraper holder R = 2.5 mm (2 pcs. required) Flat scraper 1964 Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1,400 rpm) Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N Giodpfx Aewka S Iefnon - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: ready for operation (used), Year of construction: 2022, machine/vehicle number: 220.01.016.22, functionality: fully functional, workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, rotary table diameter: 750 mm, rotational speed (max.): 12,000 rpm, The machine is being auctioned due to a business closure! Further details on the machine’s equipment can be found in the attached order confirmation. TECHNICAL DETAILS Workpiece height: 8–60 mm Rotary table edge magazine diameter: 750 mm Edge banding material (coil): 0.4–3 mm Rotary table diameter for coil edge material: 740 mm Support surface (workpiece infeed): 600 mm Spindle speed of diamond pre-milling unit: 12,000 rpm Feed speed, chain feed: 10 and 18 m/min Spindle speed, cross-cut saw unit: 12,000 rpm Upper multifunctional milling unit speed: 12,000 rpm Lower multifunctional milling unit speed: 12,000 rpm Cutter assembly: 64 mm MACHINE DETAILS Electrical data Voltage: 400.0 V Phases: 3 Frequency: 50/60 Hz Current: 28.0 A Power: 15.0 kW EQUIPMENT Ball bearing rotary table for edge banding coil material Workpiece infeed and feed fence with manual adjustment Chain feed with two speeds Gisdpfxexwt Nqe Afnen Edge feeding for coil and strip material in single feed Upper and lower multifunctional milling unit x-motion PLUS via smartouch Upper and lower radius scraper blade x-motion PLUS Corner rounding unit with motorized adjustment for postforming and softforming profiles Upper and lower polishing units Pneumatic-mechanical infeed stop for workpiece gap monitoring glueBox application unit

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, type of input current: three-phase, plate height: 50 mm, From business closure Type: IMA Compact 309 C Year of manufacture: 1992 For roll material and strips up to 9mm thickness - Gluing with hot-melt adhesive granulate - End trimming - Sawing Gijdpfx Afox Avcdjnen - Flush milling - Scraper knives and buffing Payment in cash upon collection. Private sale – no warranty.

Condition: excellent (used), 2 pre-cutters gluing unit Godpfjulh Nusx Afnoin Guillotine Drip unit with 2 saws Straight cutter Rounding cutter