Edge banding machine up to 100 mm gluing height

Lange Maschinenbau B 70 K-100

Condition: good (used), Year of construction: 2003, functionality: fully functional, Length of sliding table: 3,000 mm Cutting width at rip fence: 1,000 mm Cutting height with blade diameter 450 mm: 75 - 150 mm Cutting height with blade diameter 350 mm: max. 100 mm (each at 90-degree blade position) Double carriage on steel round guides, no Pertinax Reinforced main saw motor: 7.5 kW Maximum saw blade diameter: 450 mm Height adjustment of the saw unit via dimension input on the control panel Laodpfx Aex Dax Esa Ejk Motorized tilt adjustment of the saw unit via dimension input on the control panel Supplied with newly installed 350 mm saw blade 2-axis scoring saw unit, can be set in the control system to desired height and alignment relative to the main saw blade Scoring unit automatically lowers below table level when not in use Adjustment of the scorer can be done while the machine is running RAPIDO scoring saw blade – simplifies scoring width adjustment, set up in max. 3 minutes Adjustment range: 2.8 – 3.8 mm Additional accessories: - Mitre fence extendable to 3,200 mm, with 2 foldable stops - LASER cutting line indicator, e.g. for trimming cuts on solid wood planks

Condition: new, Year of construction: 2024, Description High quality galvanized steel housing Powerful, economical engines Standard optional intake connection at top or bottom Ledpfx Aefc A Uroa Ejak Uniform filter bags for all variants Discharge in chip tons The modular models of the AL-KO AAS series are available in optimally matched performance categories with energy-saving and quiet motors that drive the fan on the raw air side and thus generate particularly effective overpressure filtering. Durable quality components and an all-metal housing made of galvanized sheet steel give you investment security as well as the many retrofit options. The particularly favourable price and short installation times also contribute to the fact that the AL-KO AAS is definitely the right choice. Technical data AL-KO AAS 3013 Suction port 200 mm Nominal capacity 2.500m³/h Maximum volume flow 3.300m³/h Maximum negative pressure 2,700 Pa Filter area 3 x 2.2 m² Chip collection volume 3 x 175 litres Engine power 3.0 kW / 400 V Dimensions (LxWxH). 2486 x 578 x 2115 mm Weight: 139 kg

Condition: used, functionality: fully functional, Edge thickness 0.4 – 3 mm SPS screen control Fully automatic edge magazine Fully automatic roll magazine – cross-cut shears Cartridge + PU gluing station + automatic dosing nozzle Workpiece height 6 – 45 mm Ljdpfxew Igg Ss Aa Eoak End trimming unit swivels at 0 and 10 degrees Flush, bevel, and radius milling, swivels up to 15 degrees Profile scraper Buffing unit Soundproof cabin CE version Machine is FUNCTION-TESTED and in GOOD CONDITION ex works

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 30, SLIDING RACK FOR GLASS M80-30 MANUFACTURED IN 2025/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. M80-30 RACK TECHNICAL DATA Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -30 The width of the storage strip for glass – 8 cm The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Structure width (B)- 436 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 27 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 27000 kg Partitions inclination – left or right – depending on assembly Assembly time - 14 hours The number of people required for assembly – 2 people DOCUMENTS ATTACHED TO M80-30 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty The product is delivered as a whole ready for use. We also deliver our racks for glass to the EU countries and other countries. Ledpfxsha E S Tj Aa Eoak

Condition: like new (used), Year of construction: 2024, operating hours: 420 h, functionality: fully functional, machine/vehicle number: 122, total length: 9,900 mm, total width: 2,450 mm, total height: 4,000 mm, overall weight: 21,000 kg, rotor diameter: 680 mm, rotational speed (max.): 42 rpm, power: 235.36 kW (320.00 HP), Equipment: rotational speed infinitely variable, Demo machine Arjes ekomaxx 800 Lsdevzribepfx Aa Ejak Perfect shredder for green waste, waste, waste wood, plastic etc.

Condition: good (used), Well-maintained horizontal creel. Passage 1000 mm. Stroke 800 mm. Feed electronically adjustable. Clamping carriage approx. 7.5 m long with 5 hydraulic clamping jacks. Can still be inspected in operation. Lodpfx Asunhl Usa Eeak

Year of construction: 1994, condition: good (used), Rivo gang wheel sharpening machine Tyop GA 250 Lajdpfx Aaopl D Hxe Eek

Condition: used, machine/vehicle number: 13292, Rotor diameter: 368 mm Rotor width: 1500 mm Laodewmg Sgjpfx Aa Eek Rotor blades: 82 Stator blades: 1 row Drive motor: 90 kW

Condition: excellent (used), Coating and packaging line with thermo-shrinkable film, consisting of: a) Double conveyor belt (mm 3000 x mm 1100) for application of corner protections. - Adjustable feeding speed from 3 to 15 m/min. b) Stretch wrapping machine Mod. Compact 250/6R with motorized conveyor belt - Total length of the machine (with motorised belt) mm 7600 approx. - Reel holder (6 upper reels max width mm 2450 + 6 lower reels max width mm 1450) - Slitter and transversal welding machine (mm 2500) - Max useful height mm 700 - Installed power KW 12 - With automatic device to pack light pieces (from 1 to 5 Kg) by welding bar c) Shrinking tunnel total length about 4700 mm (of which about 3700 mm are of the tunnel) with hot air circulation (heating by electric resistances and fan), total installed power KW ? - conveyor with metal rods (width mm 1500 approx.) - Max useful height mm 700 Lsdpfegp Diaex Aa Esak - Adjustable feed speed from 4 to 20 m/min d) Outlet roller conveyor "ELME" (idle rollers) for cooling (mm 3000 x 1500 ca.)

Condition: ready for operation (used), Feature Specification Rotor Size φ ≈ 370 mm × 1500 mm Rotor Speed 80–125 rpm Knife Count Up to 123 (V‑rotor) Power 75–90 kW (electromech); up to 110 kW Infeed Opening 1500 × 1890 mm Laodsw A I Tdepfx Aa Esk Weight ~6400 kg Output Particle Size 15–100 mm (exchangeable screen) Drive & Bearings WAP gearbox, sealed bearings Control Siemens PLC Discharge Belt / screw / suction available Applications Plastics, packaging, wood, fibre, etc.