Used Band Saws for sale (7,782)

Condition: not inspected (used), functionality: unexamined, overall weight: 1,500 kg, workpiece weight (max.): 250 kg, cutting speed: 75,000 mm/min, section length (max.): 400 mm, No minimum price - guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within the specified timeframes: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS Cutting length: approx. 400 mm Cutting speed: up to 75 m/min Saw feed: hydraulic Lowering speed: 0-250 mm/min Bandsaw blade dimensions: 4,100 x 27 x 0.9 mm Maximum material weight: 250 kg Lodpfx Aajym Ntxeljhd MACHINE DETAILS Bandsaw drive: 2.2 kW Hydraulic unit: 0.37 kW Coolant pump: 0.12 kW Total power requirement: min. 2.7 kW Dimensions & Weight Dimensions (L x W x H): 2,400 x 2,300 x 1,700 mm Weight: 1,500 kg External reference: Lot 17 / Weilheim

Condition: used, Year of construction: 1986, Roll diameter: 600 mm Cutting height: 385 mm Motor power: 2.2 kW Table tiltable Table size: 540 x 600 mm Total height: 2100 mm Weight: approx. 260 kg Storage location: Nattheim Lhedew D Aybopfx Aaled

Condition: used, Year of construction: 1992, Wheel diameter: 500 mm Band guidance above and below Tilting table Lhsdpfx Aasw D Aw Hsljd Location: Nattheim

Condition: reconditioned (used), reinforced gray cast iron table, tiltable balanced cast iron wheels Lhodpfev Dg A Uex Aaled precise upper & lower blade guide Work table dimensions approx. 680 x 580 mm Cast iron wheel diameter 600 mm Max. cutting height 340 mm Max. cutting width approx. 540 mm Three-phase motor approx. 2.2 kW, 50 Hz, 400 V

Condition: excellent (used), Band saw welder IDEAL model BSO Ledpfxoxw H Sro Aalohd

Condition: new, Thin layer from 2 mm thickness Maximum cutting accuracy up to ± 0.15 mm Minimal kerf, cutting thickness from 1.3 mm Ideal for the cutting of dried and wet wood or alternative materials Surface of the thin layer ready for gluing without need of further processing steps Friendly user electronic control Two programmable speeds of the carpet (0-30 m/min) for the best cutting quality and to safeguard the blade life Optical sensor to start cutting cycle and speed change Ground table “Flexam” belt feeding for the best performance 6 rubber idler rollers adjustable in height, for opening/closing to ensure the best pneumatic pressure on the workpiece during feeding and cutting Oleo-pneumatic tensioning of the blade for better cutting performance Top and bottom ‘’Chaco’’ blade-guides which guarantee the best stability blade during cutting Internal/external lubrication of the blade to remove residues of resins and chips 4 dust extraction to optimize the suction of dust and chips Cutting height of 400 mm (500 mm optional) Cutting width up to 400 mm High quality powerful motor kW 15 (HP 20) Ethernet connection for on line service Carbide or stellite blades for best cutting performance DM of saw wheels mm 800 Max. cutting height mm 400 fixed working table mm 1290 x 800 Max. saw blade width mm 54 x 0,9 Max. & min. saw blade length mm 5530 / 5380 motor Kw 15 (HP 20) suction connection nr 2x Ø 120 & 1 x Ø 100 compressed air requirement bar 6/ 27 ltd Lsdpfx Asdcd Dljalshd machine weight Kg 880 feed speed m/min 0 - 30 height of feeder belt mm 300 length of feeder mm 750 feeder roller DM mm 160 Max. feeder opening mm 200 Max. fence opening mm 200 feeder speed var. mt/ min 0-30

Condition: new, band saw according to CE and with the following features strong cast iron work table, inclinable balanced cast iron fly wheels saw blade guide, telescopic saw blade tensioning indication upper and lower saw blade guide cleaning brush for the lower fly wheel sturdy AL fences max saw blade width 16 mm suction connection under the table micro switches on machine doors Lsdpfjdibw Aex Aalohd work table dimensions 600 x 520 mm working table height 900 mm fly wheel DM 450 mm fly wheel speed 700 U/ min max cutting height 300 mm max cutting width 440 mm min/ max saw blade length 3690/ 3742 mm min/ max saw blade dimension 6 x 0,5 / 25 x 0,5 mm motor 3,0 kW, 3 Ph 50 Hz, 400 V suction connection 120 mm

Condition: new, Working area round 360 mm Working area quadrant 360 x 360 mm Working area bundle W x H 180 - 280 x 50 - 160 mm Cutting speed 20 - 100 m/min (infinitely variable) Saw blade dimensions 4,420 mm x 34 mm x 1.1 mm Hydraulic saw blade tensioning Multiple feed 500 mm Drive power 3.7 kW Machine size LxW 2,500 x 2,200 mm Machine weight 2,300 kg Standard equipment - Hydraulically controlled full-stroke double clamping system. - Driven by IE3 motor with inverter (PMSM, Euate IE4) - User-friendly NC touchscreen control with high-end system (NCIII CONTROL) - Feed rate display on the HMI (10" HMI screen) - Automatic chip conveyor - Automatic shuttle feed - IC board control for all electrical and hydraulic functions - Floating pendulum vice - Two-piece front vice Lhedpfx Aasqrqvholsd - Stepless speed control by inverter - Hydraulic blade clamping - Roller bearings with hydraulically controlled carbide blade guide system - Automatic working height control through quick start sensor - Preset cutting counter with cut-off function - Nesting device for bundle cutting (hold-down device) - Power-operated blade cleaning brush - Saw blade monitoring with regard to standstill and blade breakage - Flushing hose for machine cleaning - Work light - Roller table with 2 m length - One M42 bi-metal saw blade - One set of tools and one toolbox

Condition: used, Year of construction: 2000, Solid Metora MB 330 metal band saw, renowned for its stable cutting performance and durable build quality. This model comes fully equipped with roller conveyors on both the left and right sides, a digital end stop, and a mist coolant system for efficient, clean, and precise cutting results. Perfectly suited for cutting profiles, tubes, and solid materials in steel, stainless steel, aluminium, and non-ferrous metals. Ideal for workshops and production facilities requiring repeatable accuracy and reliability. Specifications: Throat depth: 520 mm. Lhsdpjymzgksfx Aaljd Maximum workpiece height: 320 mm. Saw band speed: 16 – 96 m/min. Saw blade dimensions (length × width × thickness): 4,600 × 32 × 1.1 mm. Cutting capacities: Round workpieces, 90° / 45°: Ø 320 mm. Round workpieces, 30°: Ø 250 mm. Square workpieces, 90° / 45°: 320 × 320 mm. Square workpieces, 30°: 240 × 240 mm. Maximum flat profile (90°): 500 × 320 mm. Maximum flat profile (45°): 330 × 320 mm. Maximum flat profile (30°): 320 × 230 mm. Dimensions: Saw machine: 2200 x 1400 x 1400 mm (LxWxH). Machine weight: approx. 800 kg. Roller conveyor (left): 5000 x 1000 mm. Roller conveyor (right): 7000 x 1000 mm. Total set length: 14000 x 1500 x 1400 mm.

Condition: used, Year of construction: 2002, cutting diameter / mm saw band length / mm cutting width / mm KASTO tec AC5 automatic band saw Sawing capacity: 23kW Machine weight: 5.9t Year of manufacture: 2002 Lhjdpfx Aoxrg E Ioalsd Cutting ranges in mm approx.: Round: 530mm Square: 530x530mm Flat: 530x630mm Smallest dimension to be sawn: 10x10 mm Minimum length to be sawn: 6 mm Minimum residual length, single cut: 10 mm Minimum residual length, automatic mode: 35 mm Automatic material feed, single, max. (standard): 600 mm Automatic material feed single max. (optional): 1500/3000 mm Multiple material feed: 9999 mm Machine roller conveyor length: 1568 mm Max. piece weight: 2275 kg Cutting speed: 12-120 m/min (infinitely variable) Cutting feed: continuously adjustable Material feed: with ball screw Automatic feed: with horizontal clamping device Material clamping: hydraulic, continuously adjustable Clamping force Machine clamping device: 200-1000 daN Feed clamping device: 200-2000 daN Saw blade clamping: hydraulic, factory-set Saw blade cleaning: by easily replaceable double brush, driven by a hydraulic motor. Coolant tank volume: approx. 185 l Pump capacity: approx. 25 litres/min On request, we can offer you the 4 immediately available saw blades at an additional cost.

Condition: like new (used), Year of construction: 2010, FICEP ZAAG 1045 BH Main technical specifications - Minimum sawing capacity at 90°: 80 x 10 mm Lhjdpfx Aaswd Ugteled - Maximum sawing capacity at 90°: 1015 x 450 mm - Sawing capacity at 45°: 620 x 450 mm - Sawing capacity at 60° (only available on two flanges with relevant option): 350 x 350 mm - Mitre angles: +45° / -60° - Bandsaw blade dimension: 41 x 1.3 mm - Bandsaw blade speed: 20 - 100 m/min - Band motor power: 5.5 kW - Working table height: 850 mm

Condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 500 mm, cutting width (max.): 800 mm, Equipment: CE marking, – DTR technical documentation in Polish TECHNICAL PARAMETERS: – flywheel diameter: 815 mm – max. cutting height: 500 mm – max. cutting width: 800 mm – table dimensions: 1030 x 600 mm – table tilt: 0° – 20° Lhedjyuf Tqspfx Aaled – blade dimensions: 5643 x 38 x 0.65 mm – blade speed: 20 m/s – motor power S1: 4.5 kW – large tilting cast iron table – high-quality steel construction – precise bandsaw guidance system above and below the table – rubber-coated wheels for extended bandsaw blade life – overall dimensions (L/W/H): 122 / 77 / 254 cm – weight (net/gross): 680 / 770 kg

Condition: new, Bernardo horizontal bandsaw HBS 275-400 V Technical specifications Cutting capacity round 90 ° and 225 mm Cutting capacity 90 ° 200 x 200 mm square Section flat 90 ° 245 x 150 mm Cutting area around 45° 160 mm Section square 45 ° 160 x 160 mm Lhedpfxsd Du T Is Aaljd Cutting area around 60 ° 100 mm Cutting range, square 60 ° 100 x 100 mm Working height 910 mm Band saw blade dimensions 2480 x 27 x 0,9 mm Cutting speeds of 400 V 45 / 90 m / min Coolant pump S1 100% 100 W S1 motor power output 100% 1,1 kW Motor power S6 40% 1,5 kW Voltage 400 V Machine dimensions (L x D x H) 1430 x 720 x 1700 mm Weight approx. 190 kg Scope of delivery • Band saw blade • Workpiece stop • Base • Belt tension gauge • Vise with quick locking • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Condition: new, For technical specifications, see the PDF file. Lsdpexp H Drefx Aalehd

Condition: new, For technical specifications, see the PDF file. Lodexp H H Hjpfx Aaljhd

Condition: new, Fastech Horizontal Double Miter Band Saw Semi Automatic BMSY 440 DGH Round cutting range: mm 440 Flat Cutting range: mm 610 x 440 Square Cutting range: mm 440 +30 ° Round Cutting range: mm 400 +30 ° Flat Cutting range: mm 500 x 440 +30 ° Square Cutting range: mm 440 +45 ° Round Cutting range: mm 440 +45 ° Flat cutting range: mm 410 x 440 +45 ° Square cutting range: mm 410 +60 ° Round Cutting range: mm 320 +60 ° Flat cutting range: mm 250 x 440 +60 ° Square cutting range: mm 250 -30 ° Round cutting range: mm 440 -30 ° Flat cutting range: mm 500 x 440 -30 ° Square cutting range: mm 410 -45 ° Round Cutting range: mm 410 -45 ° Flat cutting range: mm 410 x 440 Lhjdpfshpil Eox Aalsd -45 ° Square cutting range: mm 410 -60 ° Round cutting range: mm 320 -60 ° Flat cutting range: mm 285 x 440 -60 ° Square cutting range: mm 285 Engine power main drive: kW 3 Hydraulic pump power: kW 0,55 Engine power coolant pump: kW 0,12 Belt speed: stepless m/min. 20 - 100 Saw band dimensions mm 5200 x34 x 1,1 working surface height: mm 860 weight: kg 1540 length / depth / height: mm 2800 / 1210 / 1870 Double miter saw Infinitely variable band speed, hydraulic vice sensitive cutting pressure regulation High performance gearbox Hydromechanical saw band tensioning Saw band brush Digital display for miter angle

Condition: new, Bernardo fully automatic double column bandsaw BSM 330 NC Pro Technical specifications Cutting range round: 90° 330 mm Cutting range flat: 90° 330 x 330 mm Cutting range square: 90° 330 x 330 mm Working height: 635 mm Cutting speeds: (NC PRO) 20 - 80 m/min Saw blade dimensions: 4115 x 34 x 1.1 mm Coolant pump: 0.135 kW Hydraulic pump motor power: 0.75 kW Ljdpfx Aaoqzhxislehd Motor power: 4.0 kW Machine dimensions: (LxDxH) 2520 x 2280 x 1630 ( depth: 3690 with feed roller conveyor) Weight approx.: 1990 kg Scope of delivery: - Saw band - Hydraulic vice, - Pressure gauge for band tensioning - Hydraulic saw band tensioner, - Hydraulic workpiece feed - Hydraulic workpiece feed, - Chip conveyor (NC Pro) - Coolant device, - Hydraulic lowering cylinder - Work light, - Delta frequency inverter (NC Pro) - Delta frequency inverter (NC Pro,) - Motor protection switch - Motor protection switch - Automatic limit switch - Cutting pressure regulation - PLC control Delta - Automatic belt breakage control - Hydraulic bundle tensioning device - Feed roller conveyors

Condition: new, Fastech horizontal bandsaw semi-automatic machine BMSY 320 DGH saw band dimensions: 4160x34x1,1 mm Lhjdpfxog Ekp No Aalod band speed: 20 - 100 m/min infinitely variable Cutting capacity 0° rectangular: 450x320 mm, round 320mm Cutting capacity 30°: round 320 mm, square 320 mm, rectangle 410x320 mm Cutting capacity 45°: round 320 mm, square 320 mm, rectangle 330x320 mm Cutting capacity - 30°: round 320 mm, square 320 mm, rectangle 420x320 mm Cutting capacity - 45°: round 320 mm, square 320 mm, rectangle 340x320 mm Cutting capacity - 60° : round 240 mm, square 220 mm, rectangle 230x220 mm working height : 860 mm coolant pump motor: 0.12 kW hydraulic motor: 0.37 kW motor: 2.2 kW length: 2260 mm width: 1160 mm Height: 1700 mm Weight: 1030 kg Double mitre saw infinitely variable belt speed hydraulic vice High performance gearbox Hydromechanical saw band tensioning Saw band brush Digital display for mitre angle

Condition: new, Bernardo twin band saw MITRE MBS 300 DG-V PRO Technical specifications Cutting capacity round / square 90 ° 255 mm / 210 x 210 mm Section flat 90 ° 310 x 210 mm Cutting capacity round / square 45 ° R 220 mm / 210 x 210 mm Section flat 45° R 220 x 200 mm Cutting capacity round / square 45 ° L 230 mm / 200 x 200 mm Section flat 45° L 230 x 200 mm Cutting capacity round / square 60 ° R 135 mm / 135 x 135 mm Section 135 x 135 mm flat 60 ° R Working height 930 mm Band saw blade dimensions 2750 x 27 x 0,9 mm Cutting speeds, variable 20 - 80 m/min Coolant pump 100 W S1 motor power output 100% 1,5 kW Motor power S6 40% 2,2 kW Voltage 400 V Machine dimensions (L x D x H) 2000 x 1250 x 1900 mm Weight 350 kg Scope of delivery • Band saw blade • Workpiece stop • Base • Belt tension gauge • Blade guide with tungsten carbide inserts • Quick clamping Vice • Coolant system • Hydraulic lowering cylinder • Motor protection switch Lhodpfsd Hzbwox Aalod • Automatic shut-off

Condition: new, PILOUS double miter band saw ARG 300 plus H.F. with automatic hydraulic lifting of the saw frame Incl. special accessories: driven chip brush, belt tension indicator Roller conveyor D 400 / 3m incl. digital measuring system Roller conveyor D 400 / 3m Round: 90°300mm, -45°220mm,+45°240mm,+60°155mm Square: 90°290mm, -45°195mm,+45°225mm,+60°150mm Ledeh S Ikkopfx Aalshd Rectangle: 90°375 x 190mm, -45°240 x 100mm, +45°240 x 160mm, +60°150 x 150mm Main motor:400 V, 50 Hz, 2,2 kW Pump motor:400 V, 50 Hz, 0,05 kW Hydraulic power unit motor:400 V, 50 Hz, 0,18 kW Saw blade speed:15-90 m/min. Stepless Saw blade length:3150 x 27 x 0,9 mm Working height from vice: 910 mm Coolant tank: approx. 15 l Machine dimensions (min.) 950 x 1750 x 1600 mm machine dimensions (max.)1700 x 2000 x 2150 mm Machine weight: 645 kg

Condition: new, Band saw Bernardo HBS 460 N - 400 V Technical Specification Cutting width 465 mm Cutting height 280 mm Sawband dimension 3607 x 25 x 0.6 - 3 ZpZ Saw widths 9.5 - 25.4 mm Cutting speed 420 / 840 m/min Ljdpfx Aed N S Ursalohd Table dimension 480 x 630 mm Table height 970 mm Saw table inclination -5° to 45° Suction connection of 2 x 100 mm Engine power S1 100% 2.2 kW (3.0 hp) Motor recording power S6 40% 3.0 kW (4.0 hp) Voltage 400 V Machine dimensions (W x D x H) 1050 x 800 x 1950 mm Weight approx. 162 kg Delivery • Saw band • Longitudinal stop with magnifying glass • Miter stop • Drive wheels made of aluminium • Ball-bearing saw band guide • Motor incl. brake • Sliding stick • Operating tool

Condition: new, PILOUS double miter band saw ARG 260 plus H with automatic hydraulic lifting of the saw frame Incl. special accessories: driven chip brush, Belt tension indicator Roller conveyor D 300 / 3m incl. manual measuring system Roller conveyor D 300 / 3m Cutting range: Round:90° -45° +45° +60° in mm:260-175-200-125 Square:90°-45°+45° +60° in mm:255-145-185-120 Rectangle:90°-45°+45° +60° in mm.300 x 200-190 x 100-185 x 200-125 x 120 Main motor 400 V, 50 Hz, 1.4 kW Pump motor 400 V, 50 Hz, 0.05 kW Motor from hydraulic unit 400 V, 50 Hz, 0.18 kW Saw blade speed 35/70 m/min. saw blade length 2880 x 27 x 0,9 mm working height from vice 910 mm Oil in hydraulic system approx. 6 l (ISO 6743/4-HM, DIN 51 524 part 2-HLP) Coolant tank approx. 15 l Machine dimensions (min.) 950 x 1650 x 1450 mm Machine dimensions (max.) 1550 x 1850 x 2050 mm Lsdpeilqbuofx Aaljhd Machine weight 490 kg

Condition: new, For technical specifications, see the PDF file. Ljdpfx Aajxp Hygslshd

Condition: new, For technical specifications, see the PDF file. Ledpjxp H Nnofx Aaljhd

Condition: new, For technical specifications, see the PDF file. Lodpfx Aaexp H Rlolehd