Used Centauro C for sale (30)

Condition: used, Motor 4.0 kW Roller diameter: 800 mm Max. cutting height: 440 mm Max. cutting width: 785 mm Table height: 970 mm Table dimensions: 1170 x 800 mm Blade width: 40 x 7/10 mm Blade length: 5630 mm Extraction port diameter: 120 mm Dimensions: 1625 x 940 x 2516 mm Weight: 650 kg Stock location: Nattheim Redpfowayzbex Aa Uep

Condition: new, Year of construction: 2026, Diameter of saw wheels 700 mm Max. cutting height 460 mm Max. cutting width 680 mm Table height from floor 940 mm Table size 1030x710 mm Tilting table 20° (45 NO CE) Max.-min. lengthof blade max/min 5180/5040 mm Max. width of blade 40 x 0,6 mm Motor power 3kW (HP 4) Rsdpfxegyd Sko Aa Uep R.P.M. of wheels 736 R.P.M Dust extrac. outlet 2 x Ø 100 mm Overall dimensions 2300x1415x880 mm Net weight 400 Kg Gross weight (crate) 490 Kg Gross weight (case) 520 Kg Shipping volume 2,30 m3 Sound power level 88,9 db

Condition: new, Thin layer from 2 mm thickness Maximum cutting accuracy up to ± 0.15 mm Minimal kerf, cutting thickness from 1.3 mm Ideal for the cutting of dried and wet wood or alternative materials Surface of the thin layer ready for gluing without need of further processing steps Friendly user electronic control Two programmable speeds of the carpet (0-30 m/min) for the best cutting quality and to safeguard the blade life Optical sensor to start cutting cycle and speed change Ground table “Flexam” belt feeding for the best performance 6 rubber idler rollers adjustable in height, for opening/closing to ensure the best pneumatic pressure on the workpiece during feeding and cutting Oleo-pneumatic tensioning of the blade for better cutting performance Top and bottom ‘’Chaco’’ blade-guides which guarantee the best stability blade during cutting Internal/external lubrication of the blade to remove residues of resins and chips Rodpfx Aedcd Dlea Uep 4 dust extraction to optimize the suction of dust and chips Cutting height of 400 mm (500 mm optional) Cutting width up to 400 mm High quality powerful motor kW 15 (HP 20) Ethernet connection for on line service Carbide or stellite blades for best cutting performance DM of saw wheels mm 800 Max. cutting height mm 400 fixed working table mm 1290 x 800 Max. saw blade width mm 54 x 0,9 Max. & min. saw blade length mm 5530 / 5380 motor Kw 15 (HP 20) suction connection nr 2x Ø 120 & 1 x Ø 100 compressed air requirement bar 6/ 27 ltd machine weight Kg 880 feed speed m/min 0 - 30 height of feeder belt mm 300 length of feeder mm 750 feeder roller DM mm 160 Max. feeder opening mm 200 Max. fence opening mm 200 feeder speed var. mt/ min 0-30

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Net weight: 410 kg Maximum blade width: 35 × 0.6 mm Table height from the floor: 900 mm Wheel rotation speed: 715 rpm Worktable dimensions: 810 × 580 mm Wheel diameter: 600 mm Motor power: 2.9 kW Rodpfx Aeymw Nnoa Usp Maximum cutting height: 600 mm Extraction port diameter: 100 mm Blade length: 4880–4980 mm Machine dimensions (L × W × H): 2324 × 1168 × 762 mm Table tilt range: 0–20° Gross weight: 450 kg Maximum cutting width: 580 mm

Condition: new, Year of construction: 2025, Diameter of saw wheels mm 800 Max. cutting height mm 400 Stationary working table mm 1290 x 800 Max. blade width mm 54 x 0,9 Max. and min. blade length mm 5530 / 5380 Motor power Kw 15 (HP 20) Sawdust hoods nr Nr. 2 Ø 120 Nr. 1 Ø 100 Compressed air consumption (wheels braking and feeder opening) bar 6 Net weight Kg 880 Feeder Height of feeding carpet mm 300 Rjdpfx Aeglfv Dea Usp Length of carpet fence mm 750 Idle rollers dia. mm 160 Max. rollers-blade clearance mm 200 Max. fence-blade clearance mm 200 Variable feed speed rate mt/min 0-30

Condition: new, Year of construction: 2025, functionality: fully functional, exhibition machine minimum slat thickness 2mm magnetic fence position reader adjustable pulling roller spacing material presence detector tape cooling/lubrication system wheel diameter 800mm engine power 15kW smooth feed speed adjustment pneumatic pulling roller pressure control panel with colour touch screen Rjdjv Dh R Tjpfx Aa Ujp screw tape centring pneumohydraulic tape tensioning year of production 2025 - brand new machine total weight 1300kg 380V power supply Machine available in March

Condition: used, Year of construction: 2020, machine/vehicle number: 31213, functionality: fully functional, input voltage: 400 V, cutting height (max.): 570 mm, cutting width (max.): 880 mm, overall weight: 700 kg, table height: 950 mm, saw band length: 6,400 mm, table length: 1,030 mm, table width: 770 mm, For sale: Professional Centauro CO900 band saw, purchased new in 2020, very lightly used and in excellent technical condition. The machine was used occasionally, not for serial production, making it ideal for a joinery workshop or manufacturing plant. Key technical specifications: • Wheel diameter: 900 mm • Max. cutting height: 570 mm • Max. cutting width: 880 mm • Blade length: 6400 mm • Motor power: 5.5 kW (7.5 HP) • Table dimensions: 1030 × 770 mm • Table height: 950 mm • Weight: approx. 700–750 kg • Voltage: 400V / 50Hz • Mechanical/foot brake Rjdpsyhhytofx Aa Usp • Blade tension indicator • Extraction connection: 2 × Ø120 mm The machine is in full working order and ready for immediate use. The only drawback is the good but not perfect visual condition, as a result of slight surface rust, mainly on the worktable. This is due to the machine standing unused in an unheated room for the past several months. Delivery available at an additional cost. 23% VAT invoice issued. Net price, negotiable. A set of several saw blades included with the machine.

Condition: ready for operation (used), Technical characteristics Max. mortise depth : 150 mm Max. mortise length : 340 mm Longitudinal stroke : 300 mm Cross-travel : 80 mm Max. height of upright on worktable : 300 mm Working table dimensions : 400 x 135 mm Table inclination : -45° to +45°. Mechanical front press Pneumatic door locking Aluminium extension with mechanical stops Guiding rod for horizontal door positioning Compressed-air gun for machine cleaning Door support Automatic chain lubrication pump Manual vertical travel Power and Motors Voltage: 400 V Pluging: Three-phased Power: 2,2 Kw Redpfst Dga Njx Aa Ujp Motor: 3 CV Overall dimensions Lenght: 1916 mm Width: 1400 mm Height: 1026 mm Weight: 420 Kg

Condition: excellent (used), Saw wheel diameter 800 mm Max. Cutting height 520 mm Max. Cutting width 780 mm Table height from floor 970 mm Table dimensions 1170×800 mm Rodpjtrdk Dofx Aa Usp Max. min. belt length 5670/5540 mm Max. Belt width 45 x 0.7 mm

Condition: used, Year of construction: 2014, functionality: fully functional, BAND SAW CENTAURO MOD. CO700 - CE RULES - CE rules - Year 2014 Rsdpfx Aaox Ruk Eo Uep

Condition: good (used), Year of construction: 2005, functionality: fully functional, Description see above Redpfx Aoxwcxhja Uop

Condition: used, SECOND-HAND BAND SAW CENTAURO MOD. 800 Redpfxjr Ilxcs Aa Ujp

Condition: excellent (used), functionality: fully functional, Centauro CO700 Band Saw Rsdpfxovyp I Se Aa Uop Saw wheel diameters 700mm Max. cutting height 460mm Max. cutting width 680mm Max. band width 40×0.6mm Motor power 3kw Wheel rpm 736r.p.m CE certificate Year of production 1997

Condition: excellent (used), total height: 2,075 mm, saw band length: 4,650 mm, saw band width: 35 mm, Centauro CO 600 Roller diameter: 600 mm Cutting height: 360 mm Cutting width: 580 mm Table dimensions: 810 x 580 mm Band length: 4650/4550 mm RPM: 715 Required space (LxWxH): 1165 x 760 x 2075 mm Motor power: 2.2 kW Condition: as new Year of manufacture: 2012 Rsdpsu Uictjfx Aa Ujp

Condition: used, Year of construction: 2007, Fully programmable 3 axis horizontal CNC swing chisel mortiser suitable for general joinery and furniture production. By a combination of automatic movement of the mortisting head in the x axis and an automatic gripper that positions the timber no manual movement or handling of the component is required other than loading and positioning the timber against the pneumatic reference stop and then unloading when the mortising cycle is finished. The complete movement, clamping and, mortising cycle is fully automatic. X, Y and, Z axis movements are all via re-circulating ball and screw drives and using linear slideways to give maximum positioning accuracy. Thanks to the programmable Z axis it is possible to produce off line mortises, double mortises or produce thicker mortise slots with the same chisel. Programming is very simple thanks to the 'user friendly' graphic touch screen controller were programs can be memorised and stored under a number or specific name up to 8 characters. The swing chisel cutter itself produces a very clean mortise slot and if required for deep mortises up to 3 depths of cut can be programmed to give a 'woodpecker' type cutting operation. Other programming options include working off either the face of the timber or the thickness and the possibility to produce mirror image components (left/right hand) in one program. Year - 2007 CE X axis stroke 1100mm. Y axis stroke 250mm. Max. depth of cut 120mm (depending on chisel size) Z axis stroke 100mm Max. workpiece height of 120mm. All movements on re-circulating ball and screw drive with brushless motor Max. workpiece width 200mm Max. swing chisel thickness 20mm. Min . slot length 25mm approx (with swing chisel) Min. slot thickness 6mm. 3 vertical pneumatic clamps. 3 horizontal pneumatic clamps. 4 hp main motor. 'Power 1000' touch screen graphic controller with 99 programs each with 50 lines. USB key facility. Programmable speed for cutting depth. Anti splinter guards with air blowers and dust extraction points. Working table dimensions 1210mm x 215mm Rsdpfx Aeymnbnja Uep Air supply 6 bar / 470 l/min consumption. Fitted with separate dedicated programmable hollow chisel head for producing the small mortises for glazing bars

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, workpiece weight (max.): 2,500 kg, P0304 SLG 6000 1x R0094 Surcharge for 20 HP motor 1x R0097 Extension of saw width up to max. 1200 mm 1x R0387 Pneumatic pressure beam (max. length 2500 mm) 1x R0107 Z30 laser unit with mounting provision 3x R0100 Slide plate with dust-free ball system (with 7 balls) – per piece 1x R0102 Surcharge for 2 vertical pneumatic pressure units with frontal control 2x R0103 Additional vertical pneumatic pressure unit (only with 2 vertical pneumatic pressure units option) 1x R0479 Additional safety devices for schools 1x R0545 Saw opening closure system Rjdpeya Hy Nofx Aa Uop

Condition: excellent (used), Bandsaw - 600 mm wheel diameter Rodpfx Asx Srlvea Uop - Upper and lower roller guide - 2.2 kW - Tilting table

Condition: new, Year of construction: 2026, A versatile saw for cutting wood for veneers, lamellas and the like. Height of workpieces up to 400 mm. The powerful feed rate gives a very high performance. The R800 is a solid saw. In the R800, it is possible to use tapes of different widths. It is equipped with a mechanical feed of the workpiece. It is designed so as to easily cope with work in conditions of high load of the main engine and high processing speed (up to 30 m / min). It is possible to use a tape with a width of 80mm. The sturdy frame of the machine is made of welded sheet steel. Massive flywheels made of cast iron ensure maximum efficiency, and the wheels are mounted on dustproof ball bearings. The lower part of the saw blade is specially reinforced, which allows a higher degree of inertia (inertia) to be achieved without excessive starting and braking loads. To further improve the evenness of work, the guides are specially ground so that they remain carefully balanced. Diameter of saw wheels 800 mm Max. cutting height 400 mm Max.cutting width 770 mm Height of table from 960 mm Table size 1060 x 800 mm Max. and min. blade length 5530/5380 mm Width of blade 80 x 0,8 mm Motor power 11 (HP 15) kW R.P.M. of wheels 680 R.P. M. Sawblade speed 28,5 mt./sec. Sawdust hoods 1 Ø 100 mm. 2 Ø 120 mm. Required capacity for extraction system (for air speed 20 mt./sec.) 3840 m3/h Compressed air consumption 60 Lt./min. Working pressure of pneumatic brake 6 - 8 bar Net weight 880 kg RVP210 Height of feeding roller 50 mm Feeding roller diameter 200 nm Standard feeding rollers 2 nr. Height of standard rollers fence 300 mm Length of Rollers fence 600 mm Rollers fence tilt 0-45° Max. Roller-blade clearance 200 mt/sec Max. fence-blade clearance 420 mm Motor power 0,37 kW Variable feed speed rate 0-30 mt./min Compressed air consumption 30 Lt/min. Working pressure 3 - 6 bar Rsdjgp I U Nspfx Aa Usp Net weight 180 Kg

Condition: new, Technische Daten: fly wheel DM 800 mm Max. cutting height 400 mm Max. max cutting width 780 mm tabel dimensions 580 x 810 mm tildable table 15 Grad Max. saw blade dimension 80 x 0,8 mm saw blade length 5380 - 5530 mm motor 11,0 kW, 400 V, 50 Hz suction 2 x 100 mm fly wheel speed 680 U/ min suction DM 1 x DM 100 mm & 2 x DM 120 mm compressed air 6 - 8 bar machine weight: ca. 850 kg machine dimensions L x B X H 1550 x 950 x 2500 mm welded steel structure, fully closed pneumatic brake table in cast iron upper & lower saw blade guide Rjdpfxeby U Dpo Aa Uop star triangle switch emergency push button telescopic saw blade guard/ guide work table tillable 20 deg. saw blade cooling/ cleaning device with diesel tank saw blade tension indicator cleaning brush for fly wheels solid work piece fence cast iron fly wheels motor circuit protection switch CE CENTAURO Model RVP200 feeder roller height 160 mm work piece fence with rollers height 160 mm var. feed speed 1 - 21 m/ min pneumatic opening / closing of feeder Max distance saw blade - feeder approx 220 mm Max. distance saw blade - work piece fenceapprox . 200 mm CE

Condition: new, Year of construction: 2025, CENTAURO R800+RVP 210 slat and veneer band saw Maximum cutting height 38 cm Maximum cutting width 210 mm Main engine power 11 kW Feed RVP 210 manual or pneumatic opening Smooth feed speed adjustment 30 m/min Main engine power 11 kW Saw length 5530-5380 mm Maximum blade width 80 x 0.8 mm Feed table with rollers Redpfxovz A S Ts Aa Uep Year of production 2025

Condition: new, Centauro ALFA NC Machining Centre For Joinery Components & Doors A versatile and flexible NC controlled machining centre suitable for a variety of machining operations including hinge recessing, lock slots, handle holes, key slots and euro grooves etc. Programming is extremely simple thanks to the colour graphic touch screen controller using pre-installed electronic macros. As standard the machine can be equipped with one milling head that automatically moves for either vertical or horizontal machining. It also has interpolation of the axis. Optional additional machining operations include producing a square corner hinge plate recess or lock face recess by means of the additional milling unit. The operator simply selects in the program if they want a radius or square corner and the machine does the rest. In addition the same milling head can be used to make the small pilot hole for hinge screws etc. There is also the possibility to produce a square end tenon, round end tenon or dovetail / dovetail slot when the special front table is fitted. Lastly on request the machine can be configured to import ISO files from external design software (e.g ARTCAM Express) to enable detailed engraving of items such as name plates etc. Axis capacity - X 2800mm, Y 180mm, Z 150mm. (2400mm X capacity when optional drilling head fitted). 1 x ER32 collet for milling cutter 16mm max. dia. Max working table dimensions - 3000x618mm X axis positioning speed 35m/min. Y axis / Z axis positioning speed 6m/min. Retractable pneumatic positioning stops 2 off - on front of table Rjdpfx Asb Tmngja Usp Adjustable pneumatic workpiece clamps x 3 - mounted on rear of table. Left hand side ref. stop. Front table extension supports x 2 Router motor power 3.3kw. Router motor RPM 0-18,000 rpm. Touch screen controller - Elco Power 1000. Dust extraction outlet x 1 80mm dia, 2 x 100mm dia CE side and rear safety guards with front light curtain.

Condition: as good as new (ex-display), Year of construction: 2023, Automatic loading and unloading Advanced machining capabilities Ideal for volume production Redpfxeul Uaae Aa Uep Elevate your door frame lining production with the Centauro Alfa Jamb, a state-of-the-art machine designed for the automatic loading, machining, and unloading of door frame linings and jambs. Combining precision, efficiency, and user-friendly technology, the Centauro Alfa Jamb is the ultimate solution for door frame manufacturing. The powerful CNC router head is capable of performing both vertical and horizontal machining operations. This versatile router head excels in hinge and lock plate recessing or slotting, ensuring each cut is executed with precision and consistency. Additionally, a specialised small router is included for spot drilling hinge screw holes and squaring the corners of hinge recesses, enhancing the accuracy and finish of your products. The Alfa Jamb automates the entire process from loading to unloading, allowing your operators focus on higher-level tasks while the machine handles the repetitive work. Programming is simple thanks to the latest generation TOP12-S color graphic touch screen controller. This user-friendly interface features pre-installed electronic macros, allowing you to quickly set up and adjust machining operations with ease. Specification Technical Information X Axis stroke 2800mm Y Axis stroke180mm Z Axis stroke 150mm Suitable for Jamb dimensions of 2400mm x 200mm x 75mm Router / Milling head 3.3kw, ER25, 0 to 18000 rpm Pilot Hole Drilling Head 2.2kw ER 25, 0 to 18000 rpm 3 x pneumatic vertical workpiece clamps, automatically activated through the program 3 x pneumatic horizontal workpiece clamps, automatically activated through the program Top 12-S industrial touch screen control 12" with simple macro programming CE safety perimeter guarding to sides / rear with a front light beam curtain Dust extraction connection 120mm Pneumatic supply 6 Bar Overall Dimensions 9644 x 1844mm Overall weight 2000kg Total load 5.6kw Year - 2023 CE. Condition - As new, only used for showroom demonstrations

Condition: new, Centauro BETA 3 Axis CNC Swing Chisel Mortiser A new fully programmable 3 axis horizontal CNC swing chisel mortiser suitable for general joinery and furniture production. By a combination of automatic movement of the mortisting head in the x axis and an automatic gripper that positions the timber no manual movement or handling of the component is required other than loading and positioning the timber against the pneumatic reference stop and then unloading when the mortising cycle is finished.The complete movement, clamping and mortising cycle is fully automatic. X,Y and Z axis movements are all via re-circulating ball and screw drives and using linear slideways to give maximum positioning accuracy. Thanks to the programmable Z axis it is possible to produce off line mortises, double mortises or produce thicker mortise slots with the same chisel. Programming is very simple thanks to the 'user friendly' graphic touch screen controller were programs can be memorised and stored under a number or specific name up to 8 characters. The swing chisel cutter itself produces a very clean mortise slot and if required for deep mortises upto 3 depths of cut can be programmed to give a 'woodpecker' type cutting operation. Other programming options include working off either the face of the timber or the thickness and the possibility to produce mirror image components (left/right hand) in one program. On request the machine can be equipped with a separate dedicated programmable hollow chisel head for producing the small mortise holes for glazing bars. Alternatively a horizontal milling head can be specified that can be used for hinge recessing, slotting for louvre doors etc etc. X axis stroke 1100mm. Y axis stroke 250mm. Max. depth of cut 120mm (depending on chisel size) Z axis stroke 100mm Max. workpiece height of 120mm. All movements on re-circulating ball and screw drive with brushless motor Max. workpiece width 200mm (wider on request). Max. swing chisel thickness 20mm. Min . slot length 25mm approx (with swing chisel) Min. slot thickness 6mm. 3 vertical pneumatic clamps. Rjdpfx Aaob Tmpqs Uep 3 horizontal pneumatic clamps. 4 hp main motor. 'Power 1000' touch screen graphic controller with 99 programs each with 50 lines. USB key facility. Programmable speed for cutting depth. Anti splinter guards with air blowers and dust extraction points.1 x 80mm 1 x 60mm dia. Working table dimensions 1210mm x 215mm Installed power 3.6kw. (std machine) Air supply 6 bar / 470 l/min consumption.

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 400 mm, saw band length: 5,550 mm, saw band width: 80 mm, table length: 800 mm, table width: 1,060 mm, working height: 400 mm, - Italian manufacture - Lamella band saw - Unpainted - Very good condition - Used saw Band Saw: - Wheel diameter: 800 mm - Max. blade width: 80 mm - Max. cutting height: 400 mm - Main drive motor: 11 kW - Feed speed range: 2–40 m/min - Feed system with pneumatic pressure to the guide Rjdpfx Aew H Rq Hoa Uep - Metal slip-in feed roller - Blade length: 5550 mm - Throat (blade-to-frame distance): 780 mm - Screw-type blade tensioning - Table size: 1060x800 mm - Tilting worktable: up to 15° - Extraction port diameter: 120 mm - Blade lubrication system - Foot brake - Cast wheels - Star/Delta starting - Power supply: 380V - Dimensions (LxWxH): 1600x1100x2400 mm - Weight: 860 kg Feed Unit: - Metal, toothed, drive roller - Five feed speeds, selectable by belt adjustment - Roller height: 30 mm - Feed motor: 0.75 kW - Pressure system

Condition: used, Technical data: Max. cutting height: 340 mm Max. cutting width: 680 mm Wheel diameter: 700 mm Blade adjustment range: 4870–4970 mm Max. blade width: 40 mm Min. blade width: 20 mm Worktable dimensions: 650x700 mm Worktable tilt: Extraction port diameter: Motor power: 2.2 kW Voltage: 400 V Brake Emergency stop switch Manufacturer: Centauro Overall dimensions: Length: 830 mm Width: 1200 mm Height: 2230 mm Rodpfjyhnlcox Aa Ujp