Used Candles for sale (22)

Condition: ready for operation (used), Year of construction: 1993, A candle filter system Faudi with precoating principle for the treatment and purification of grinding oil is available. Operating fluid: grinding oil, flow rate: 360m³/h, tank capacity: 180m³, control: Siemens. Documentation available. An on-site inspection is possible. Ibedsxnbr Iopfx Aacjc

Condition: new, Year of construction: 1989, Candle filter, free-standing on 3 stainless steel feet Filtration surface: 30 m²/h Ijdpfx Aajxbqkgscobc Test pressure/operating pressure: 7 bar Volume: 1830 l Length: 1,5 m Width: 1,5 m Height: 2,9 m Material: Stainless steel 1.4541; wall thickness of jacket and cone 4 mm; of dished bottom 6 mm Features: Outlet: butterfly valve DN150

Year of construction: 1991, condition: excellent (used), Cartridge filter VelaCart B750 of the company Seitz-Filter-Werke Type: VELAcart B750 - 16H07 DN 080 Year of construction: 1991 Factory No.: 1992 Filter insert: Candle Capacity: 105 litres Clamp screw type: M20 x 85 A2 (10 pieces) Iedpfefbckujx Aacobc Candles: Quantity: 16 pcs. Length:73 cm Mesh size: 5 x 3 mm (length x width) Container: Permissible operating pressure (bar): Liquid 10 / Gas 10 Permissible operating temperature (°C): Liquid 85 / Gas 85 Dimensions: Height: approx. 1.78 m width: approx. 56 cm Weight: approx. 150 kg In very good condition!

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 308-600-1716, drilling depth: 600 mm, spindle speed (min.): 1,423 rpm, drill diameter: 65 mm, center height: 299 mm, TECHNICAL DETAILS Boring Unit Boring system: BTA + Ejector Speed steps: 8 or 16 with gear change Feed range: 0 – 500 mm/min Rapid traverse forwards/backwards: 5,000 mm/min Spindle taper: DIN 55022, size 6 Main Drive Three-phase motor: 37 kW, 1,500 rpm Frequency control: available Spindle Speeds Range I: 16/180 – 200/230 – 290/330 – 370/430 rpm Range II: 550/620 – 740/800 – 990/1,120 – 1,280/1,450 rpm Feed Drive Servo motor: 10 Nm, 3,000 rpm Ball screw: MH 50 × 10 × 14 Coolant System Total power requirement: 73 kW Coolant pump: MSDA 40-R38, SMDA 80-R46 Magnetic filter candles: MFK 400 R Liquid cooler: DKL 7 Gap tube filter: 54 572 71 104 Immersion pump: TB 405/390 Centrifuge: Polar U6 MACHINE DETAILS Dimensions and Weight Machine weight: approx. 6,000 kg Paintwork Color: RAL 6011 EQUIPMENT Clamping fixture with movable drill bushing Clamping fixture with drill bushing carrier Clamping fixture with clamping table Clamping fixture with centering tailstock Clamping fixture with centering clamp ZS2 (HICO) Force measuring system KIMISIT 0 – 30 Iodswx E N Iopfx Aacebc Hydraulic unit HS04-C807-6-0 Chip conveyor SEW RF 430T71D4 Centrifuge Hanning ZG 52x6K.137 Fans Dietz DR 80a 69 Lubrication pump Vogel DM7 Control unit for main and feed drives

Condition: used, Year of construction: 2006, operating hours: 14,000 h, functionality: fully functional, machine/vehicle number: 85-089, overall weight: 20,000 kg, RAPESEED OIL PRESS SYSTEM A complete and automatic rapeseed oil press installation based on a Reinartz AP15 press with a 55Kw motor driven via a DANFOSS VLT 5062 frequency controller and has a capacity of 1000 Kg rapeseed - 800 Kg sunflower seeds per hour, a crude oil stirring tank of 15,000 liters with a Wangen KL30S60.00 eccentric pump as feed to an automatic AMA filter system consisting of a plate filter with 20 m2 filter surface and 2 fine filters, one with filter bag and one with filter candles up to 0.5 micron size of the impurities. The seed supply is done via a dosing screw with the possibility of heating the seed, the real entrance to the press is protected by a permanent magnet to catch iron impurities. The discharge of the rapeseed cake is done via a chain conveyor and conveyor belt. The entire installation is controlled via a SIEMENS Simatic Multi Panel touch screen control cabinet of approximately 1m wide / 2m high. This cabinet also contains a modem to forward error messages to various GSMs. The control can work in auto mode as well as in manual mode. In addition to these most important systems, the installation also contains the necessary additional silos for filling the main silo, which enables 24/7 operation. The entire installation was built in 2006 and has produced 14,000 hours and is now completely ready for transport. If desired, the sale of individual elements can be discussed. If further information is required, this can best be done by email and preferably in Dutch, French or English. Iedpjwl Afyjfx Aacobc

Condition: as good as new (ex-display), Year of construction: 2025, HD washbasin - HD brush washbasin The washbasin has an adjustable 60 bar high pressure pump with which cleaning takes place in a closed work area. The cleaning takes place with an aqueous degreaser (10kg included in delivery) and at approx. 45 ° C. Viewing window including lighting Medium filtration through a candle filter Comfort operation by means of a foot switch including turntable Technical specifications: Working area: 1,200 x 700 mm Usable height: 400 mm Payload: 50 kg Operating pressure: adjustable up to max. 60 bar Pump output: 14 lt / min Washing temperature: adjustable up to max. 45 ° C Tank capacity: 170 lt Heating capacity: 4,000 W. Iedpohl If Nefx Aacobc Total output: 8.0 kW Voltage: 400 V ac 1 P + N + PE; Frequency: 50 Hz Machine weight: approx. 180 kg Overall dimensions with the lid open: 1,480 x 991 x 2,080 mm

Year of construction: 2024, condition: as good as new (ex-display), From our showroom in Stuttgart we sell alternately our demonstration units. The equipment was used for demonstration purposes. Subject to prior sale. Offer plus transport costs. All data without guarantee. Ibsdpfegrm Egex Aacjc We offer maintenance and service to Glogar cleaning equipment. HD washstand - HD brush washstand Washstand has a controllable 60 bar HD pump with which the cleaning takes place in a closed working chamber. The cleaning is carried out by means of aqueous degreaser and at approx. 45°C. Viewing window incl. lighting Medium filtration via candle filter Comfort operation by foot switch inclusive turntable Technical data: Working surface: 800 x 600 mm useful height: 400 mm load capacity: 50 kg Operating pressure: adjustable up to max. 60 bar Pump capacity: 14 lt/min Washing temperature: adjustable up to max. 45°C tank capacity: 100 lt heating capacity: 3.000 W Power, total: 7,0 kW voltage: 400 V ac 1 P+N+PE; frequency: 50 Hz Machine weight: approx. 140 kg Overall dimensions with lid open: 1,100 x 910 x 2,020 mm

Condition: excellent (used), Year of construction: 1994, MACHINE Dimensions (height x width x depth): 2760 x 1110 x 1840 mm Weight: 2750 kg WORK TABLE Table size: 840 x 600 mm Dielectric above table: 360 mm Maximum workpiece weight: 1000 kg T-slots: 4 x 10 mm Distance between table and quill without chuck (max/min): 595/180 mm WORKING HEAD Travel range X - Y: 565 x 400 mm Travel range Z: 415 mm Resolution X - Y - Z: 0.001 mm C-axis resolution: 0.001° Rapid traverse speed: 800 mm/min Max. electrode weight without rotation: 100 kg Ibsdpfx Aaewbalvscjc Max. electrode weight with rotation: 15 kg DIELECTRIC SUPPLY Tank volume: 400 liters Paper candle filters: 4 pieces GENERATOR Dimensions (height x width x depth): 1800 x 600 x 920 mm Weight: 300 kg Nominal current: 60 – 120 A Connected load: 15 – 23 kVA

Year of construction: 1988, condition: excellent (used), Cartridge filter of the company Seitz-Filter-Werke Factory No.: 1988 Type: S000-31H07 DN 100 Year of construction: 1991 Capacity tank: 243L Screws: M20 x 100A2 (14 pcs.) Container: Permissible operating pressure (bar): Liquid 6 / Gas 6 Permissible operating temperature (°C): Liquid 85 / Gas 85 Candles: Quantity: 31 pcs. Length: 1 m Mesh size: 5 x 3 mm (length x width) Ibjdsfbckwjpfx Aacec Dimensions: Height: approx. 2.13 m Width:approx. 65 cm Weight: approx. 300 kg In very good condition!

Condition: used, Candle Filter System – Automatic, 3 Filters 2x Filter housings 30" x 3 FBFM33 1x Candle filter FBT013GNW25J 1x Sepex pump 1x Pump for injection of oenological product after filtration or reinjection of wine 1x Mounted on skid, fully equipped with fixed piping Iedpewvi I Aofx Aacsbc

Condition: new, pressure: 100motor: 15daylight: 500stroke lenght (max.): 400table diamension: 800 x 600tappet area: 800 x 600table height: 850messurements (LxWxH): 1.300 x 2.000 x 2.750weight approx.: 5.500oil filling: 200 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 230mm. Auxiliary cylinder: 2 pcs. Ø 50 x 30mm. Auxiliary guide: 2 pcs. Ø 50mm. Motor: 11kw. - 15hp. ( IE-3 ) Pump: 23Liter / ASC. Speed : flow 110mm./sec. - return 200mm./sec. - Pressure : 9 mm/sec. Installation height: 500mm. Stroke length: 400mm. Table top: 800 x 600 - (with T - grooves) Plunger plate: 800 x 600 - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Ibsdpfxom Nntye Aacjc Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 9 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Year of construction: 2025, condition: as good as new (ex-display), HD washbasin - HD brush washbasin The washbasin has an adjustable 60 bar high pressure pump with which cleaning takes place in a closed work area. The cleaning takes place with an aqueous degreaser (10kg included in delivery) and at approx. 45 ° C. Viewing window including lighting Medium filtration through a candle filter Comfort operation by means of a foot switch including turntable Technical specifications: Working area: 1,200 x 700 mm Usable height: 400 mm Payload: 50 kg Operating pressure: adjustable up to max. 60 bar Pump output: 14 lt / min Washing temperature: adjustable up to max. 45 ° C Tank capacity: 170 lt Ibedpohl If Tefx Aacoc Heating capacity: 4,000 W. Total output: 8.0 kW Voltage: 400 V ac 1 P + N + PE; Frequency: 50 Hz Machine weight: approx. 180 kg Overall dimensions with the lid open: 1,480 x 991 x 2,080 mm

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: ECO-DEVNYA-I8, total length: 6,490 mm, total width: 2,000 mm, total height: 6,260 mm, overall weight: 21,500 kg, power: 44 kW (59.82 HP), Equipment: documentation/manual, Hazardous Waste Incineration Plant – Inciner8 I8-1000 Iedpjxlcw Tjfx Aacebc Location: Devnya, Bulgaria Manufacturer: Inciner8 International Ltd., United Kingdom Year of manufacture: 2018 Condition: Installed, fully operational, complete documentation and CE certification General Description The Inciner8 I8-1000 is a high-performance system for thermal treatment of hazardous and industrial waste, featuring fully automatic loading, dual-chamber combustion, and an integrated flue-gas cleaning system. Designed for ease of operation, robust construction, and long service life, the unit ensures full compliance with EU Directive 2000/76/EC and the European Industrial Emissions Directive (IED). The system guarantees complete oxidation of waste under controlled temperature and residence time, resulting in non-hazardous ash and emissions meeting EU regulatory limits. Main Technical Parameters: • Type: Dual-chamber incinerator with secondary afterburner • Model: Inciner8 I8-1000 C/W Eco Flam Burners • Feeding capacity: up to 330 kg per batch (automatically adjusted to waste type) • Combustion temperatures: Primary 800–1100 °C | Secondary ≥ 850 °C (2 s residence time) • Loading system: Hydraulic RAM feeder with automatic door and safety interlocks • Auxiliary fuel: Low-NOx diesel burners (two-stage surface-stabilized combustion) • Operation mode: Underpressure – 2 mbar (ID fan with frequency control) • Heat recovery: Air-cooled heat exchanger for waste-heat utilization (up to 400 °C) Flue-Gas Cleaning System (Pollution Control System – PCS): Three-stage treatment: 1. Heat exchanger – rapid cooling of flue gases below 425 °C 2. Powder dosing unit – hydrated lime/limestone injection for neutralization of acid gases (HCl, SO₂, HF) 3. Ceramic candle filter – final filtration of particulates, heavy metals, and residual compounds Key features: • Ceramic filter candles with automatic reverse-pulse cleaning • Particulate emissions (PM₁₀ / PM₂.₅) < 1 mg/Nm³ • Integrated system preventing de novo dioxin formation by maintaining temperature > 800 °C and removing chlorine compounds Continuous Emission Monitoring System (CEMS): • Measured parameters: O₂, CO, CO₂, NO, NO₂, HCl, HF, TOC, particulates, humidity, pressure, temperature • Ranges: in accordance with EN 14181 (O₂ 0–25%, CO 0–4000 ppm, etc.) • Data management: USB / Internet output, software package included Certification & Compliance: • CE Declarations of Conformity for the complete system and subsystems (autoloader, ID fan, PCS) • Manufacturer ISO quality certification • Complies with EU Directives: 2006/42/EC (Machinery), 2014/35/EU (Low Voltage), 2014/30/EU (EMC) • Emission testing: QUAL 1 Test Report No. 05/24-01-2019 – confirmed compliance with 2000/76/EC Advantages: • Fully automated and safe operation with PLC control • Suitable for hazardous, medical, and industrial waste streams • Minimal residual ash and low OPEX • Heat recovery option for hot-water utilization • The system is ready for dismantling and relocation Delivery terms: EXW Devnya, Bulgaria (Ex Works – pickup from site)

Condition: excellent (used), functionality: fully functional, Hello, I have for sale a complete wine bottling line. The set includes the following components: · PALLADINI filler with labeller – the bottling machine is equipped with a nitrogen flushing system after filling Iedpfew Rccbjx Aacsbc · ENOLMAC S70/3 banderoling machine · Kaeser compressor · BILEK candle filter · Flowmeter with pump · Rinser · ROVER pump with filter · Two stainless steel tanks: 1100L and 400L · Stainless steel accumulation tables Price: 36,000 EUR (net), VAT invoice. The offer includes installation and commissioning within the country. Outside the country, accommodation for the installers is at the buyer’s expense.

Year of construction: 2001, condition: used, The Pall CFS system is designed as a single unit and can be installed directly in front of the filling line without the need for a buffer system. It is a completely independent process unit consisting of the following components: filter vessel Piping and connections Membrane cleaning system (CIP) integrity check Switchboard The hygienic design, the simple integrity test and the full automation ensure the microbiological safety of the system and usually allow the operation of the filling staff. Cluster filtering groups filter elements into clusters. Each cluster has its own outlet valve. During filtration, all clusters are open. Cleaning, sterilization and integrity testing are performed per cluster. Advantages of the CFS principle; Longer life Integrity testing on site Integrity diagnostics per cluster Special rinsing High specific flow rate Short flush times Constant flow in all candles Minimal water consumption Quick replacement of filter elements Controlled backwash Minimal beer loss High biological safety Constant availability With this filter system only preclarified products may be filtered, which have normally filterable properties in their composition. Max. filtration flow: 400 hl/h continuous Permissible operating pressure: 6 bar Permissible operating temperature: 105 °C Volume: 1456 l Current: 10 A Voltage: 220 V Water: cold water: min. 150 hl/h; hot water (max 65 ° C): min. 150 hl/h Compressed air: prepared compressed air: 4 - 6 bar; control air: 5 - 8 bar Length: 1,40 m Width: 1,20 m Height: 1,85 m Weight: 3450 kg Base construction: basic frame with control and measuring components and filter container; cleaning module Iodpevcqx Djfx Aacebc Features: 98 filter cartridges, 3 piston diaphragm pumps (Dosage), centrifugal pump with frequency converter (WT circuit), various analog and digital sensors (flow, pressure, level, temperature, conductance), various valves, control cabinet

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, Hello, selling a GAF Duplex candle filter unit. Completely made of stainless steel, 1.4404 Condition see photos, EXW Marthalen Ibodpfx Ajvl Imksacsc

Condition: new, pressure: 60motor: 11daylight: 450stroke lenght (max.): 400table diamension: 600 x 500 x 80tappet area: 600 x 500 x 90table height: 850messurements (LxWxH): 1.300 x 2.000 x 2.700weight approx.: 4.000oil filling: 200 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 150mm. Auxiliary cylinder: 2 pcs. Ø 60 x 40mm. Auxiliary guide: 2 pcs. Ø 40mm. Motor: 7,5kw. - 11hp. ( IE-3 ) Pump: 18cc. - 26Liter / ASC. Speed : flow 110mm./sec. - return 120mm./sec. - Pressure : 11mm - 5./sec. Installation height: 500mm. Stroke length: 400mm. Iodsmmuq Ijpfx Aacjbc Table top: 600 x 500 x 80mm. - (with T - grooves) Plunger plate: 600 x 500 x 90mm. - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 7 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: as good as new (ex-display), Year of construction: 2025, HD washbasin - HD brush washbasin The washbasin has an adjustable 60 bar high pressure pump with which cleaning takes place in a closed work area. The cleaning takes place with an aqueous degreaser (10kg included in delivery) and at approx. 45 ° C. Viewing window including lighting Medium filtration through a candle filter Comfort operation by means of a foot switch including turntable Technical specifications: Working area: 1,200 x 700 mm Usable height: 400 mm Payload: 50 kg Operating pressure: adjustable up to max. 60 bar Pump output: 14 lt / min Washing temperature: adjustable up to max. 45 ° C Tank capacity: 170 lt Heating capacity: 4,000 W. Iedpfxohl Ifzo Aacjbc Total output: 8.0 kW Voltage: 400 V ac 1 P + N + PE; Frequency: 50 Hz Machine weight: approx. 180 kg Overall dimensions with the lid open: 1,480 x 991 x 2,080 mm

Year of construction: 2004, condition: used, Technical details: candle diameter: 21 mm candle length: 300 mm capacity: 1872 Stück/h heating-up temprerature: 70-120 °C cycle time: 13 sec candle material: Paraffin/Stearin control: Siemens S 5 space requirement of the machine approx.: ca.L:24 xB: 2 xH: 5,2 m Candle Production Plant / Candle Molding Machine - This plant is applied for the production of parafin/stearin candles according to the casting process with a high degree of automation. - Multicoloured candles can be produced and equipped with various mould boxes (e.g. cylindrical board candles or pointed candles). Ibodpfx Asu Nw S Isacec - production capacity: for max. theoretical maximum performance of 1872 pieces / h with a minimum cycle time of 23 seconds per mould box with 12 candles with 300 mm pointed candles and board candles with diameter of 21 mm, continuous operation approx. 1200 pieces / h Documentation available Price on a negotiable basis! *

Condition: new, pressure: 125motor: 22daylight: 500stroke lenght (max.): 400table diamension: 800 x 600 x 120tappet area: 800 x 600 x 300table height: 850messurements (LxWxH): 1.600 x 2.000 x 3.200weight approx.: 7.000oil filling: 400 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 220mm. Auxiliary cylinder: 2 pcs. Ø 70 x 40mm. Auxiliary guide: 2 pcs. Ø 50mm. Motor: 15kw. - 22hp. ( IE-3 ) Pump: 48Liter / ASC. Speed : flow 120mm./sec. - return 140mm./sec. - Pressure : 13mm - 5mm/sec. Installation height: 500mm. Stroke length: 400mm. Table top: 800 x 600 x 120mm. - (with T - grooves) Plunger plate: 800 x 600 x 300mm. - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Iedpfxomr Hpce Aacjbc Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 9 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Year of construction: 2025, condition: as good as new (ex-display), HD washbasin - HD brush washbasin Washstand has an adjustable 60 bar HD pump with which the cleaning takes place in a closed working chamber. The cleaning is done by means of aqueous degreaser (10kg included in delivery) and at approx. 45°C. Viewing window incl. lighting Medium filtration via candle filter Comfort operation by means of foot switch inclusive turntable technical data: Working surface: 800 x 600 mm useful height: 400 mm load capacity: 50 kg Operating pressure: adjustable up to max. 60 bar Pump capacity: 14 lt/min Washing temperature: adjustable up to max. 45°C Tank capacity: 100 lt Heating capacity: 3.000 W Isdjd H Umrepfx Aacobc Power, total: 7,0 kW Voltage: 400 V ac 1 P+N+PE; Frequency: 50 Hz Machine weight: approx. 140 kg Overall dimensions with open lid: 1,100 x 910 x 2,020 mm

Condition: as good as new (ex-display), Year of construction: 2025, HD washbasin - HD brush washbasin The washbasin has an adjustable 60 bar high pressure pump with which cleaning takes place in a closed work area. The cleaning takes place with an aqueous degreaser (10kg included in delivery) and at approx. 45 ° C. Viewing window including lighting Medium filtration through a candle filter Comfort operation by means of a foot switch including turntable Technical specifications: Working area: 1,200 x 700 mm Usable height: 400 mm Payload: 50 kg Operating pressure: adjustable up to max. 60 bar Pump output: 14 lt / min Washing temperature: adjustable up to max. 45 ° C Tank capacity: 170 lt Heating capacity: 4,000 W. Total output: 8.0 kW Voltage: 400 V ac 1 P + N + PE; Frequency: 50 Hz Isdpeurud Esfx Aacobc Machine weight: approx. 180 kg Overall dimensions with the lid open: 1,480 x 991 x 2,080 mm