Used Belt Filter Press for sale (41,552)

Year of construction: 2003, Condition: good (used), Manufacturer: Limus Kft (ALTERRA Kft) Type: LIM-1.5/a Year of manufacture: 2003 Performance: 2-4 m³/h P0Zfo3Lp Engine: Manufacturer: Sew-Eurodrive Power: 0.37 kW Electrical data: 50 Hz, 220 V Belt press dimensions: 2150 x 950 x 1900 mm With stand: 2150 x 1850 x 1900 mm

Condition: used, Year of construction: 2023, Operating hours: 1,851 h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410 BS-22/50 Year of construction 2023 Pump operation hours 1,851 hours, as of July 24 Press power main press 70 t (a 70 tonne hydraulic cylinder is installed, special equipment) Specific press force 90,9 N/cm² (a 70 tonne hydraulic cylinder is installed, special equipment) Feed channel 1,400 x 1,000 mm Theoretic cycle time 13 sec Theoretic throughput capacity 266 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 22 kW Connected load 65 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 5,5 t/h bulk weight of 50 kg/cbm approx. 7,5 t/h bulk weight of 100 kg/cbm approx. 9,7 t/h Bale weight with a bale length of approx. 1.2 m up to 500 kg, depends on material SPS controller Siemens S7-1500 Operating panel Schneider Harmony Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 17 t Special equipment: Wear-resistant floor made of HARDOX steel Larger main hydraulic cylinder with 70 tonnes of pressing force Special press ram for pressing loose bulk materials with small grain sizes OptiCut XS system for lower cutting forces and higher throughput rates Special pressing piston for pressing "difficult" materials Technical data for the conveyor belt: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Deutschland Type KGF GB 1500 Year of construction 2023 Drive power 4.0 kW Belt speed approx. 0.3 m/second Length feeding conveyor 2,679 mm Length elevating conveyor 6,866 mm Length goose neck 1,272 mm Grade 35° Effecting width 1,400 mm Side wall height 800 mm Carrier height 50 mm Carrier distance 750 mm Belt quality EP 400/3, 3:1 (DIN quality N) Overall height 4,515 mm Overall transport dimensions11,148 x 2,502 mm (l x w) Technical data on the non-contact personal protection system: Dpkru2 Manufacturer BOREMA Umwelttechnik AG, Switzerland Type APSS iBOR 22 Year of construction 2023 Condition of the press system: The entire system is in very good condition due to the short operating time of only 1,851 pump hours and the processing of only paper, cardboard and film. Scope of delivery: Avermann baler, type AVOS 1410 BS-22/50, incl. wire drawing stations and bale chute Avermann conveyor belt, type KGF GB 1500 BOREMA personal protection system, type APSS iBOR 22 Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: refurbished (used), Year of construction: 1990, div. Chamber filter presses from Rittershaus & Blecher, Netzsch and Passavant to be handed over, plate format 1200 x 1200 and 1500 x 1500 mm, from 40 - 145 PP plates, content from 1000 - 4500 liters, length approx. 6 - 13.6 m, all presses have to be refurbished are then sold with a 1 year guarantee, a piston Membrane pump for loading can also be offered, location is 58762 Altena O7Yz7

Condition: good (used), Year of construction: 1984, Filter area: 310 m², Filter pressure: 16 bar, Cake thickness: 30 mm, Total width: 2,700 mm, Total length: 9,800 mm, Total height: 3,230 mm, Empty load weight: 39,000 kg, Chambers: 86, Equipment: Documentation/Manual, Safety Light Barrier, Name: Chamber Filter Press Manufacturer: Schenk Type: KFP 1500/80 Year built: 1984 Construction form: Bridge beam press Filter pressure: 16 bar Press content: Approx. 4350 liters Cycle: Closed Filter area: Approx. 310 m2 Plate size: 1500 x 1500 mm Number plates: 87 Plate material: Polypropylene Plate transport: Automatic Filter cloths: No Filter cloth washer: Yes Plate pack length: 6400 mm Cake thickness: 30 mm Dimensions: L 9800 x W 2100 (2700 with control panel) x H 2860 mm (3230 mm with filter cloth washing system) Empty weight: Approx. 39000 kg Technical doc.: Yes Message: Available from August. The cast steel plates were replaced with polypropylene plates in 2001. Accessories: Control cabinet, hydraulic system, light curtain, filter cloth washing system with high-pressure pump & 2 replacement plates Dpgqtz Condition: Used-good Price: On demand

Year of construction: 2011, Condition: as good as new (ex-display), Functionality: fully functional, NEW FILTER PRESS WITH AUTOMATIC UNLOADING OF 10M2 OF FILTRANSTE® FABRIC SURFACE AREA Dptfjf

Condition: good (used), 1 x Voran continuous band / belt press with pneumatic belt tensioner, automatic belt control and high pressure belt cleaner. Model - EBP 650. Date of manufacture - 2018. Output capacity - up to 1,500 kg/h. The mash is applied to the belt in a uniform layer by the adjustable metering box, at the end of the pressing sequence the pomace is removed from the belt by a scraper. Location - London, UK. UKFM2-4357. Dpbbrt

Year of construction: 2015, Condition: excellent (used), Functionality: fully functional, Belt press with pneumatic belt tensioner, automatic belt control, high pressure belt cleaner. The mash is applied to the belt in a uniform layer by the adjustable metering box, at the end of the pressing sequence the pomace is removed from the belt by a scraper. Pws8Fv93Nj

Condition: reconditioned (used), Overhauled and new painted. The pictures are sample photos of similar machines and are intended to show the execution and quality of the overhaul. All wear parts are renewed. Filter cloths new. 1 year warranty on the filter press, excluding wear parts. Plate size: 630 x 630 mm dimensions: approx. 2000 x 1100 x 1500 mm Chamber depth: 25 mm Capacity: 210 liters Operating pressure: 12 / 15 bar Ckrx83Edp0 Turbidity inlet: flange 2", centered Number of plates: 25 plates Material plates: Polypropylene Material cloths: PP 5009 (white) Design: open filtration Closing pressure: max. 385 bar Painting: primed and painted in RAL 5010, filtrate trough + drip plate in plastic. Motor hydraulics with single acting cylinder. Optional double-acting cylinder that retracts the heavy pressure plates. With the single-acting cylinder, the operator must push back the pressure plates by hand. Optional: Filling pump as piston diaphragm pump or compressed air diaphragm pump.

Condition: ready for operation (used), Year of construction: 1995, IMMEDIATELY AVAILABLE, MSE chamber filter press, overhauled in 2012, good condition, ready for immediate use, plate format 1200 x 1200 mm, 100 PP plates, 30 mm cake thickness, contents approx. 3000 liters of sludge content, automatic. Plate transport, center inlet, closed outlet via 4 corner holes Cpvibtldmm

Condition: used, Year of construction: 1991, Filter area: 46 m², Filter pressure: 12 bar, Cake thickness: 30 mm, Total width: 1,700 mm, Total length: 5,880 mm, Total height: 2,100 mm, Empty load weight: 7,000 kg, Name: Dewatering filter press used Manufacturer: Netzsch Type: 800/42 Year built: 1991 Construction form: Side beam press Filter pressure: 12 Bar Press content: 630 liters Cycle: Closed Filter area: 46 m2 Plate size: 800 x 800 mm Number plates: 42 Plate material: Polypropylene Plate transport: Automatic Filter cloths: No Cdyx8Bgwwy Filter cloth washer: No Plate pack length: 2670 mm Cake thickness: 30 mm Dimensions: L 5880 x W 1700 x H 2100mm Empty weight: approx. 7000 kg Accessories: A control cabinet, a hydraulic system Condition: Second hand Price: On demand

Year of construction: 2024, Condition: new, Our belt presses are equipped with two large pressing rollers, which means that the pressing process takes longer and the machine is pressed more gently. The result is high quality juice that is free of turbidity and foam. Pneumatic belt tensioning and automatic belt control ensure higher quality. The belt press is equipped with an automatic brush cleaning system. You do not need a high-pressure cleaner for belt cleaning, as the belt is cleaned with six special water nozzles. All you need is a compressor with a pressure capacity of 8 bar and a ½" water connection for cleaning. Thanks to the special nozzles, you use less water and have lower operating costs. The open system ensures quick cleaning. The system can be cleaned within a few minutes. Technical data: - Nominal capacity: 950 kg/h - Power requirement: 1 kW, 230 V, 16 A - Material: Wnr. 1.4301, AISI 304 stainless steel - Compressed air requirement: 50 L/h 6 bar - IP65 electronic control cabinet - Juice yield: Up to 75% - Fully automatic and infinitely variable regulation of the belt speed - User-friendly - Easy to clean - Rollable machine feet Blox0Ledva Dimensions Length: 2230mm Width: 1450mm Height: 1250mm Height of intake: 1240mm Height pomace ejector: 500mm Height juice outlet: 370mm Weight: 540 kg

Condition: used, Plant: Chamber filter press used Type: Netzsch Dpcnfr Filter plate format: 1200x1200 Number of plates: 74 pieces Filter plates: PP Filter cloths: optionally available in coordination with the medium Filter area: approx. 204 m2 Press capacity: approx. 2719 dm3 Filter pressure: approx. 15 bar Pump technology: optional Dimensions L 8933x W 2240 x H 1900 mm Purchase or hire: Viewing of the systems by arrangement at our factory.

Condition: ready for operation (used), Year of construction: 1993, Belt width: 2.000 mm, E-drive 11 kW, dimensions: 2,5 x 2,75 x 1,78 m, weight: approx. 2,4 t., material: 1.4571 Sxsx9

Condition: reconditioned (used), Overhauled and new painted. The pictures are sample photos of similar machines and are intended to show the execution and quality of the overhaul. All wear parts are renewed. Filter cloths new. 1 year warranty on the filter press, excluding wear parts. Plate size: 630 x 630 mm dimensions: approx. 2900 x 1100 x 1500 mm Chamber depth: 25 mm Capacity: 312 liters Operating pressure: 12 / 15 bar Turbidity inlet: flange 2", centered Cfbfrkcr80 Number of plates: 40 plates Material plates: Polypropylene Material cloths: PP 5009 (white) Design: open filtration Closing pressure: max. 385 bar Painting: primed and painted in RAL 5010, filtrate trough + drip plate in plastic, Motor hydraulics with single acting cylinder. Optional double-acting cylinder that retracts the heavy pressure plates. With the single-acting cylinder, the operator must push back the pressure plates by hand. Optional: Filling pump as piston diaphragm pump or compressed air diaphragm pump.

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate format 1200 x 1200 mm, 40 - 145 plates, open or closed spout, 20, 25 or 30 mm cake thickness, pressure max. 15 bar, capacity 1200 - 4500 liters, filter surface 85 - 350 m², dimensions 7000 - 13.500 x 1800 x 2400 mm, weight 10.000 - 28.000 kg, autom. plate transport, engine hydraulics, with or without filter cloths Bgovewfhfg

Condition: used, Year of construction: 1992, Filter area: 156 m², Filter pressure: 15 bar, Pressure: 385 bar, Cake thickness: 30 mm, Total width: 1,880 mm, Total length: 8,950 mm, Total height: 1,900 mm, Empty load weight: 13,300 kg, Chambers: 95, Equipment: Documentation/Manual, Safety Light Barrier, Name: Industrial filter press used Manufacturer: Netzsch Type: 1000/96 Year built: 1992 Dpgqyf Construction form: Bridge beam press Filter pressure: 15 bar Press content: Approx. 2367 liters Cycle: Closed Filter area: Approx. 156 m2 Plate size: 1000 x 1000 mm Number plates: 96 Plate material: Polypropylene Plate transport: Automatic Filter cloth washer: No Cake thickness: 30 mm Closing pressure: 385 bar Dimensions: L 8.950 x W 1.880 x H 1.900 mm Empty weight: 13.300 kg Technical doc.: Yes Accessories: A control cabinet, a hydraulic system, a light barrier Condition: Second hand Price: On demand

Condition: excellent (used), Year of construction: 2023, Functionality: fully functional, Machine/vehicle number: K-SH_E/R2/470-25-20-Z-O-15, Filter area: 7.02 m², Filter pressure: 15 bar, Pressure: 400 bar, Cake thickness: 25 mm, Total width: 980 mm, Total length: 1,860 mm, Empty load weight: 765 kg, Operating pressure: 450 bar, Chambers: 20, Input voltage: 400 V, Clamping force: 313 N, Chamber filter press 470 x 470 with electrohydraulic shutter 20 chambers with open outlet, ( KD 25 ) Operating pressure 16 bar 1. frame Solid steel frame consisting of solid upright plates, lateral round bars and solid pressure plate. pressure plate. The uprights are encased in PVC pipes, which serve as a slideway for the filter plates and the pressure plate. pressure plate. The pressure plate is laterally mounted on plastic rollers. The upright plate is fixed to the floor on the turbidity inlet side. The stand plate is mounted loosely on plastic glides on the hydraulic side. Paint finish: - sandblasted SA 2.5 - Primed with 2-component primer - Top coat with synthetic resin textured paint, silk matt (RAL 6028 pine green) Turbidity inlet: Flange connection to DIN 2501 PN 16 DN 40 2. hydraulic system The chamber filter press is equipped with a hydraulic system for the following functions - Press opening - Closing a) Hydraulic unit Electrically operated compact hydraulic unit with mounted 2/2-way valve for relief. With internal pressure relief valve preset to 480 bar. Closing pressure: 380 bar Delivery volume: approx. 1.9 l/min Motor power: 1.0 kW / 1400 1/min (3 x 400 V / 50 Hz) b) Hydraulic cylinder Single-acting hydraulic cylinder with spring return, reinforced piston and rod guide for filter press operation. - Piston diam. 95 mm - Stroke 330 mm - Operating pressure 450 bar c) Connections Connecting lines between hydraulic unit and clamping cylinder as high-pressure hose connection. hose connection. 3. plate package Plate package consisting of: 19 chamber plates 1 head plate 1 end plate Filtration pressure 15 bar Press capacity 77.4 l Filter area 7.02 m² Design of the filter plates: Chamber plate 470 x 470 mm PP - with open outlet - with welded handles 4. drip tray and filtrate channel Two-part drip tray designed as a sliding tray with substructure made of stainless steel 1.4301 and support made of plastic PP. Support with edging on three sides. Filtrate channel made of PP (beige) Drain: Horizontal flange connection 5. safety devices The press is equipped with a protective circuit (two-hand circuit) which prevents the press from being automatically The press is equipped with a protective circuit ( two-hand circuit ) which prevents automatic closing of the press and the associated danger to persons. While the press is being closed, the operator is bound locally and cannot intervene in the working area of the filter press. The press can only be closed as long as both buttons remain pressed. If a minimum pressure is reached in the hydraulic circuit, an electrical self-holding function is established. Dph8Zt The built-up closing pressure is automatically maintained by the hydraulic unit.

Year of construction: 2014, Operating hours: 2,520 h, Condition: excellent (used), Functionality: fully functional, Machine/vehicle number: M0003405B/00003, Has been operated only 280h per year. new belt, new pressure sensor, new belt position air silinder, new belt position bearings. Specifications: capacity up to 300 kg/h power: drive motor 0,37 (0,5) kW (PS) washing machine motor 0,12 (0,16) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 280 mm width 870 mm height 1 350 mm insertion resp. discharge height 1 265 mm Cvvh9Q3Aj8 belt width 350 mm belt length 4 900 mm spread width 240 mm spread height (infinitely adjustable setting) 0 - 50 mm weight 350 kg material 1.4301 / AISI 304 juice yield bis zu 75 % belt speed 2 m/min contact time 1 min water consumption for cleaning 2 l/min connections: sewage connection Ø 48,3 mm juice discharge connection 1 “ juice discharge height 420 mm sewage discharge height 120 mm pomace discharge height 700 mm suitable for pomaceous and stone fruit Line consists of following equipment: 1. washing conveyor VORAN RM2.2 SA --- 400V 50Hz (3-phase), 2,2kW --- LxWxH:2620x700x2100 mm 2. Belt press VORAN EBP350 --- 400V 50Hz (3-phase), 0,5kW --- LxWxH:1280x870x1350 mm 3. Collection tank 65L with pump --- 400V 50Hz (3-phase), 0,75kW --- LxWxH:1250x508x290 mm 4. Screen filter DN25/DN10 --- wall mount, parallel filters for continuous cleaning, 0,25mm and 0,10mm filter screens available, 2xDIN11851 male connectors --- LxWxH:500x150x600 5. 2x Juice tank 220L --- 220L, base DIN11851 male connector with valve, side DIN11851 male connector with valve --- LxWxH: 550x550x1400 mm 6. Electric automatic pasteurizer Gebhardt EHA27E --- 400V 50Hz (3-phase), 27kW --- 750x500x1150 mm 7. Semi-automatic bag in box filler VORAN MBF500 --- 230V 50Hz (single-phase) --- LxWxH: 900x700x923 mm (dedicated table with steps and wheels LxWxH:1150x700x900) 8. Bottle line filler RIEMPITRICE B.6 A C.G --- DIN11851 male connector --- LxWxH: 900x500x1700 mm 9. Hoses and fittings DIN11851 Aisi 304

Condition: used, RUEZ BF 280 filter system Gravity belt filter Coolant filter system Year of construction: 2004 Capacity: 1800l Dimensions: 3500mm x 1400mm x 1800mm ( L x W x H ) You are welcome to come by for a viewing. We are happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Bnq9Qn3T3I Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: defective spare-parts repository (used), Year of construction: 1995, Functionality: not functional, Machine/vehicle number: PEE I 400, Pressing force: 400 t, Ram stroke: 140 mm, used eccentric press incl. functional belt device, details according to type plate, inspection possible at any time Cgi0Ahi9Co Main shaft and drive motor are to be replaced/renewed

Condition: used, Year of construction: 1988, Type of input current: three-phase, Power: 110 kW (149.56 HP), Used Amandus Kahl C35-780 Pellet press Incl. Kahl band cooler KC 101-06 Hydraulic nut with pump and hand pump 4 rollers head 5 rollers head 5 new rollers New die and used die Bipknu2Zy8S Various spare parts

Condition: used, Year of construction: 1974, Filter area: 327 m², Filter pressure: 15 bar, Cake thickness: 30 mm, Total width: 1,700 mm, Total length: 12,300 mm, Total height: 2,270 mm, Overall weight: 34,000 kg, Operating pressure: 410 bar, Chambers: 130, Equipment: Documentation/Manual, Safety Light Barrier, The Sludge filter press used will be available from September 2024. Name: Filter press Manufacturer: Rittershaus & Blecher Type: AEHIS 1200 Year built: 1974 Construction form: Bridge beam press Filter pressure: Max. 15 bar Press content: Appro. 4700 Liters Cycle: Closed Filter area: Approx. 327 m2 Plate size: 1200 x 1200 mm Number plates: 131 Plate material: Polypropylene Plate transport: Automatically Filter cloth washer: No Cake thickness: 30 mm Closing pressure: Min. 380 - max. 410 bar Dimensions: Length 12,300 x width 1,700 x height 2,270 mm Empty weight: 34 T. Technical doc.: Yes Message: It will be available from September 2024 Dpgqnr Accessories: A hydraulic system, a light barrier. Condition: Second hand Price: On demand

Year of construction: 1988, Condition: used, Reaction tank, batch system, solids separator, washing trough, painter's washing area, water treatment, tool and water cleaning, filter press, chamber filter press -Manufacturer: Poligrat, chamber filter press type 470-20/2 -Model: 11 panels -Hydraulic Cylinder: Stroke: 115mm -Dimensions: 1315/920/H1720 mm -Weight: 580 kg Qckjl

Condition: used, System: chamber filter press used Size of plate: 400x400 mm Chambers: 30 Filterplates: Polypropylene Filter cloths: as an option Outlet: open Filter surface: approx. 7,5 m² Volume of filtercake: approx. 90 dm³ Working length: approx. 1512 mm Filter pressure: 15 bar Closing pressure: Min. 380 bar, max. 410 bar Plate closure: electro hydraulic Plate transport: manual Pumps: as an option Special services: Refurbished service to customer optional. The system goes through a pre-delivery service check or a complete overhaul. Rent or Buy: Machine can be inspected at our factory Q30093Nie You want to buy or rent this plant? Talk to us, we will gladly available to you. We can offer Spare Parts, Accessories and Service for your Chamber Filter Press - Rittershaus & Blecher, Netzsch and more Filter Press Brands.

Condition: new, Hydraulic cylinder exchange cylinder Chamber filter press As a spare part for your chamber filter press, we supply hydraulic cylinders for all manufacturers and formats. Nkkud