Vertical baler, garbage press, mobile waste press, paper press
-Press chamber: with stainless steel container for big bags
-Press: pneumatically driven
N328v
-Body: made entirely of stainless steel
-Press: for cardboard boxes, tin cans and other bulky, voluminous waste
-Width: the filling opening 1240 mm
-Height: the filling opening 520 mm
-Pressing chamber width: 1200 x 800 mm
-Cover height: 1300 mm
-Container width: 980 mm
-Container length: 1130 mm
-Max. Press pressure: approx. 2.2 to
-Dimen...
This listing is for a 2005 HSM VL 500.2 Vertical Baler.
Machine Weight: 2300kg
Pressing Power: 540kn
Compression Time 43s
Bale Size: 1200x1100x1100-1200mm
Bale Weight (Cardboard): 420-450kg
Motor Power: 4kw
Dgmjt9h
Stock Code: BFPT044
Manufacturer: HSM
Model: HSM 500 VL
pressing force: 54 to
Bale size: 1200 x 800 x 1200 mm
Bale weight: approx. 500 kg
Bvfjdpy0gb
Max. bale size Bale size approx. 1,200 x 800 x 1,000 - 1,200 mm (W x D x H)
Bale chamber dimensions 1,200 x 800 x 1,520 mm (W x D x H)
Pressing time incl. return stroke 35 sec.
External dimensions 1.824 x 1.213 x 2.987 mm (W x D x H)
Approximate weight. 2,250 kg
Voltage / Frequency: 400 V / 50 Hz
Motor: 4 kW
Connection CEE 32 A / 6h
Year of manufacture 1998
Vertical baler
Pressing pressure 5 to
Press box dimensions 700 x 500 x 940 mm
Feed opening 700 x 600 mm
Max. bale size bale size 700 x 500 x 450 mm
Bale weight approx. 30 - 50 kg, depending on material
Motor 1,5 kW, 380 V, 50 Hz
Brfuhz9ghq
External dimensions W 840 x D 720 x H 2070 mm
filling height approx. 500 mm
weight approx. 320 kg
Machine is overhauled
Bartontech 50+ vertical baler
New machine, produced in Poland, with 1-year warranty
Technical parameters:
dimensions/ size of the baler (height x width x depth) – 2180 mm x 810 x 745 mm
weight of the baler – 375 kg
inlet size (height x width) – 540 mm x 720 mm
bale dimensions (height x width x depth) – 600 mm x 715 mm x 500 mm
weight of a bale – 50 – 60 kg
bale binding two-stage (tape)
Qemaausv
crushing force – 4 tons
motor – 1.1 kW
electric voltage – 240V, 13A
baler drive : hydraulic (electr...
The deep pressing chamber, wide door opening and automatic bale-out mechanism makes the Mil-tek 306 an ideal baler for companies and organisations with medium-to-large amounts of waste but limited amount of floor space.
-Bale plastic, cardboard and other material
-Ergonomic, easy, clean and safe
-Low on noise, low on energy
-Automated bale-out mechanism
-Deep and wide pressing chamber
-Efficiently handles medium-to-large volumes
-Constant pressure: highest compaction degree
Machine size
Height...
triple-chamber hydraulic baler / vertical baling press / baling machine / hydraulic / waste / paper / plastic / can press
Orwak 5070
manufacturer Orwak SWEDEN
Moveable press on rails above chambers for easy waste load.
press force 3 tones
weight 770 kg
1,1 kW, 230 V.
Dimensions of baler 258 x 225 x 76 cm.
Chamber dimensions (package) 71 x 50 x 90 cm (0,32m3).
Bifzxfci8e
1 package = 1/2 euro pallet
Baler is capable to sort 3 different types of material
(Plastic, platis foil, paper, steel straps,...
- 5,5 kW, 400V
- automatic bale ejection
- pressing force: 16to
Brf9mrouq7
- dimensions baler (WxDxH): approx. 158 x 95 x 195 cm
- weight: 1150kg
- size of filling opening (WxH): approx. 110 x 60 cm
- Bale size: approx. 110 x 80 x 70 cm
- Bale weight: approx. 100 - 220 kg (depending on the compressed material)
Width x Depth x Height: 1797 x 1070 x 2985 mm
Weight: 1886 kg
Vux2w2e
Loading aperture width x height: 1195 x 650 mm
Bale length x Bale width x Bale height: 1200 x 780 x 1200 mm
Bale weight (up to): 480 kg
Driving power: 4 kW
Voltage / Frequency: 400 V / 50 Hz
Vertical baler
pressing pressure 9 to
Press box dimensions W 900 x D 600 x H 1050 mm
filling opening W 900 x H 600 mm
Caytvmpk
Bale weight approx. 70-120 kg, depending on material
motor 2,2 kW, 380 V, 50 Hz
outer dimensions W 1100 x D 820 x H 2150 mm
filling height 600 mm
machine weight approx. 670 kg
stands on rollers
Machine is in overhaul and is offered with warranty.
The pictures from our archive show an identical machine.
In this offer we would like to propose you
VERTICAL BALER RWM 400
Used machine after a general refurbishment
Price: 3500 euro’s (net price)
3 months warranty
Technical description:
• Pressure : 25 tonnes
• Inlet size : 698 x 1200 x 800 mm
• Bale weight : +/- 450 kg
• Bale dimensions : 1000 x 1200 x 800 mm
• 1 cycle time : 40 sec.
• Noise level : 75 dB
0gq8dovu
• Machine weight : 1300 kg
• Power supply (kW-V-Hz) : 11 kW – 400 V – 50 Hz
• Machine dimensions : 3000 x 1707 x 1187 mm
Please ...
Producer: HSM
Td7vswij
Typ: 45 VL
Presskraft: 5 t
Anschluss: 400 V
Ballengroesse: ca. 70 x 50, h 45 cm
Masse: 75 x 85, h 210 cm
Dimensions: (W x D x H) 1900 x 1050 x 2481 mm
Loading aperture: 1200 x 600 mm
Press force: 50 t
Bale size: (W x D x H) 1200 x 800 x 1140 mm
Bale weight: cardboard up to 450 kg
Machine weight: 1520 kg
Operating power: 3 phase, 3 x 400V, 50 Hz
02ye7og2
height of machine - 2270 mm
weight of machine - 940 kg
Year of construction - 1994
Motor - 4 kW, 380 V
Ftzztg2
pressing pressure - 16 to
Bale weight - 110 - 200 kg
Loading opening - 1100 - 590 mm
bale binding - 4-fach - vertikal
Output per houer - 4 - 8
exterior dimensions - 1450 x 926 mm
filling space - 1100 - 700 x 1130 mm
In this offer we would like to propose you
Dwlu3u
Bramidan B30 VD vertical baler
Used machine, checked and tested – everything works fine
Price: 4500 euro’s (net price)
Perfect device for cardboard, paper and foil
Technical description of the baler:
Machine dimensions: 2920 x 1775 x 1025 mm
Machine weight: 1.5 tonnes
Pressing power: 30 tonnes
Bale size: 1200 x 800 x 950 mm
Bale weight: 280-350 kg (cardboard), 350-450 (foil)
Inlet size: 1200 x 560 mm
Power supply: 3 x 400V 50Hz 16A
Engine...
Press force 24 t
3 phase 3 x 400V, 50 Hz
Bh8qbot9sb
Bale size (W x D x H) 1500 x 800 x 1100 mm
Cardboard up to 500 kg
Loading aperture 1500 x 650 mm
Dimensions: (W x D x H) 2105 x 1190 x 3185 mm
Loading aperture (W x H): 700 x 500
Press force: 9 ton
Iwf7buv
Bale size (W x D x H): 800 x 650 x 600
Bale weight: 60-80 kg
Machine weight: 750 kg
Dimensions:
Width x Depth x Height: 1198 x 823 x 1986 mm
Weight: 540 kg
Loading aperture width x height: 800 x 495 mm
Bale length x Bale width x Bale height: 800 x 600 x 600 mm
Bale weight (up to): 100 Kg
Driving power: 3 kW
Voltage / Frequency: 400 V / 50 Hz
Gwjhsc
Mortising machines Maka Db-6 v Second hand 1977
Nvchn
Make:
Maka
Model:
Db-6 v
Description:
VERTICAL MORTISER MAKA DB-6 V Year of construction: 1977 Machine condition: very good afer repairs capital Offertype: used machine offer Location: Poland Technical data: AFTER REPARIRS VERY IMPORTENT VERTICAL
Year:
1977
Model: GX 600
Year: 2010
Control: Heidenhain TNC i530
Table Area: 750 x 540mm
Travels X,Y,Z: 600 x 540 x 540mm
Spindle Taper: BT 40
D8h0kxp
Spindle Power: 13 kw
Spindle Speeds: 8000 RPM
Tool Changer: 20 station
Traverses XYZ: 760 x 610 x 610mm,
Pkext
table 900 x 600mm,
18.5kW spindle motor,
Heidenhain TNC530i control,
12000 rpm Spindle,
30 station ATC,
43m/minute Rapids X & Y
BT40 Tool Size, Spindle Coolant
Max size 1400 x 1650 mm appox.
2,400mm overall width x 2,700mm overall height.
Inbuilt hydraulic pump
Bazwyj8lx3
5 x Cramping cylnders
Complete with Newall Topaz DRO
Good set of Interlocked Guards
6.3 -140 RPM
0.005"-0.250" Per rev feed
Bw9t78tdsc
Belt Conveyor
RPT
Had Top end rebuild a few years back. Excellent condition
TABLE SIZE: 36" X 14"
MACHINE TRAVELS (X/Y/Z): 30" X 16" X 20"
TABLE CAPACITY: 1,500 LBS.
SPINDLE TO TABLE DISTANCE: 4" - 24"
SPINDLE TAPER: CAT 40
SPINDLE SPEEDS: 0 - 12,000 RPM
TRANSMISSION: DIRECT IN-LINE SPINDLE DRIVE
RAPID TRAVERSE RATE (X/Y/Z): 1,400 IPM
TOOL CHANGER STYLE: SIDE-MOUNT, TWIN ARM
Bwkalbqqfp
TOOL CHANGER CAPACITY: 24 + 1 TOOLS
TOOL CHANGE TIME: 1.6 SECONDS
MAX TOOL WEIGHT: 12 LBS.
SPINDLE DRIVE: 30 HP VECTOR DRIVE
Table size 1460 x 510 mm.
Movement x-Axis 1120 mm.
Movement y-Axis 510 mm.
Movement z-Axis 510 mm.
Number of tools in magazine 24 pieces.
Maximum spindle speed 10.000 1/min.
Tool taper CAT 40.
CNC control Mazatrol M-Plus
If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.
Feel free to view our other advertisements for a complete overview of our stock.
Svbxyc
faceplate diameter:2240 mm
swing diameter:2500 mm
turning height:1600 mm
slides vertical travel:1200 mm
workpiece weight:16 t
horizontal adjustment:1390 mm
angle adjustable from - to:+ - 30 Grad
faceplate turning speed range:1,6 - 80 U/min
main drive motor:65 kW
total power requirement:70 kW
weight of the machine ca.:36 t
dimensions of the machine ca.:5,4 x 5,1 x 5,0 m
C2ljnkm88
In 2008 complete overhauled with new electric, main drive and switch cabinet.
with two vertical rams
4-axis digital r...
Traverses XYZ: 610 x 510 x 610mm,
Table 900 x 500mm,
18.5kW spindle motor,
Qlx0cbzm
Heidenhain TNC530 control,
12000 rpm Spindle,
24 station ATC,
BT40 taper,
swarf conveyor, Coolant, low volt light,
Ref. -No.: 10208
Brand: BLANSKO
Type of control: Konventionell
Storage location: Halberstadt
Country of origin: Österreich
Machine length: 13.040 mm
Machine width: 11.465 mm
Machine Height: 11.340 mm
Faceplate Diameter: 4770 mm
Faceplate Speeds I: 0,33-32,8 RPM
Max. Load on the face plate: 80.000 kg
Max torque faceplate: 273 kNm
Weight Of The Machine Ca.: 106 t
Nominal turning diameter: 5000 mm
Max. Turning diameter: 5300 mm
Max. Turning height over faceplate: 4000 mm
Traverse path of the crossb...
travel -x axis 450 mm
travel -y axis 270 mm
travel -z axis 310 mm
control Siemens 840D
turning speed range 15.000 U/min
tool taper HSK-A40
numbers of tools in magazin 24 Stk. / pcs.
Dimensions (L x W x H) 4.500 x 6.600 x 2.500 mm
weight of the machine 3.600 kg
4-axis Machining Center | CHIRON - FZ 12 W
equipped with Pick-up chain magazine.
Bww8jsw9sp
Additional equipment:
- Robotized workpiece loading unit
- 2 x 4-fold clamping device
4-axis Machining Center | CHIRON - FZ 12 W
equippe...
turning diameter 1800 mm
turning length . mm
control Siemens 840 D
faceplate diameter 1800 mm
swing diameter 2000 mm
turning height ca. 1200 mm
x-travel 2150 mm
y-travel 1425 mm
z-travel 1000 mm
Passage height 1330 mm
interference diameter 2000 mm
total power requirement 130 kVA
weight of the machine ca. 45 t
Equipment / Accessories:
- Automatic pallet changer for 3 pallets,
drive power of face plate: 70 kW, max. 300 rpm,
max. torque 25,000 Nm
3 pallet sizes: 1 x Ø 1800 mm raised version,...
OKUMA, MX 55 VB
CONTROL OKUMA OSP700 M
Mitt 4/5e axis
YEAR 1999
table size 1300 x 560 mm
MAX TABLE LOAD 700 KG
X axis - 1050 mm
Y axis - 560 mm
Z axis - 450 mm
spindle speeds up to 6.000 rpm
ATC 32 STATIONS
machine height 2700 mm
dimension 3000 x 2700 mm
Bt77ygfgml
weight 7100 KG
X axis working area: 3050 mm
Y axis working area: 850 mm
Main Electrospindle power: 5 KW
Bxd38pfu70
Total number of drilling spindles: 19
Total number of tool changer positions: 4
Traverses X Y Z: 1016 x 508 x 635mm,
Table 1219 x 457mm,
Spindle Speed 0 – 12,000rpm,
Spindle taper 40,
Spindle Motor 30Hp,
HAAS Control,
40 Station side arm ATC,
programmable coolant nozzle,
low volt light, manuals,
swarf auger,
HSM Option,
Tool setter,
S8sm29
TR160Y 5 Axis trunnion Table, Through Spindle Coolant
Ref. -No.: 10199
Brand: DMG
Type of control: CNC
Control: Heidenhain iTNC 530
Storage location: Halberstadt
Country of origin: Deutschland
X-Travel: 835 mm
Y-Travel: 510 mm
Z-Travel: 510 mm
Main spindle drive power: 14 kW
Main spindle speed range: max 12.000 RPM
Table surface: 1.000x 560 mm
Table Load: 800 kg
Number of T-slots: 5
Max. Tool Length: 250 mm
Max. Tool Diameter: 80 mm
Workpiece Diameter With 2 Vacant Positions: 130 mm
T - groove width: 14 mm
T - slot spacing: 100 mm
Tool Taper: SK 4...
x-travel:350 mm
throat:300 mm
table length:900 mm
Cdsaexug
table width:250 mm
feed speeds:20 - 1000 mm/min
spindle turning speed range:250 - 2500 U/min
total power requirement:3 kW
weight of the machine ca.:2,5 t
dimensions of the machine ca.:2 x 1,5 x 1,8 m
faceplate diameter 5000 mm
swing diameter 5800 mm
turning height 5000 mm
Control Sinumerik 840D sl
turning diameter 5700 mm
max. workpiece weight 100 t
x-axis (support horizontal) +3060/-3060 mm
z-axis (ram vertical) 2500 mm
c-axis (rotary motion table in milling mode) 360 °
vertical adjustment of the crossrail 3600 mm
Enethpr
feed speeds x- and z-axis 0,1-10000 mm/min
feed speeds c-axis 0,01 - 1 U/min
rapid traverse x- and z-axis 10000 mm/min
rapid traverse c-axis 1 U/min
adjustment speed of c...
travel -x axis 450 mm
travel -y axis 270 mm
travel -z axis 310 mm
control Siemens 840D
turning speed range 15.000 U/min
tool taper HSK-A40
numbers of tools in magazin 24 Stk. / pcs.
Dimensions (L x W x H) 4.500 x 6.600 x 2.500 mm
Bzzdwewm
weight of the machine 3.600 kg
4-axis Machining Center | CHIRON - FZ 12 W
equipped with Pick-up chain magazine.
Additional equipment:
- Robotized workpiece loading unit
- 2 x 4-fold clamping device
For additional equipment information please refer
to ...
Manufacturer Avermann
Typ AVOS 1810S-90/100
Year of construction 2005
Hours of operation 23,072 h
Quantity of pressed bales 16,163 piece
Press power main press 100 tons
Specific press capacity 121,2 N/cm²
Feed channel 1,000 x 1,800 mm
Capacity per cycle time 1,35 cm³
Theoretic cycle time 12,5 sec.
Bale size 1,100 x 750 mm
Driving motor 2 x 45 kW
Connected load 130 kW
Tying system 5 fold vertical, full automatic
Throughput rate at a
bulk weight of 30 kg/cbm approx. 12,2 tons/h
bulk weight of 50 ...
Traverses X Y Z: 1020 x 610 x 610mm,
Table 1200 x 600mm,
Bw72axrxhd
Spindle speed 12000 rpm,
Spindle taper BT40,
Spindle Motor 11kW,
Heidenhain TNC530,
30 Station ATC,
Through spindle coolant, manuals, Low Volt light, coolant, Swarf Conveyor
x-travel 1120 mm
y-travel 510 mm
z-travel 510 mm
Control Mazatrol M 32 B
Ooubd
table-size 1460 x 510 mm
feeds 1- 20000 mm/min
rapid traverse 24/24/20 m/min
spindle turning speed - stepless 40- 7000 U/min
spindle taper ISO 40
tool change unit 24 Pos.
total power requirement 20 KVA
weight of the machine ca. 5,85 t
dimensions of the machine ca. 4,7 x 2,9 x 2,7 m
Machine will be supplied with some tool holders and is ready for work. Machine
comes with a chip conveyor.
Takumi V20 Vertical Machining Centre
0srewal7
Year 2006, Fanuc 21i-MB control
2000 x 850 x 750mm capacity, 2100 x 955mm table
BT50 6000rpm 16kw gear driven spindle
large quantity of tooling and sub-table included
serial number J0521
see PDF for full specification
faceplate diameter 4500 mm
swing diameter 4600 mm
turning height 4500 mm
turning diameter 4600 mm
Control Sinumerik 840D
max. workpiece weight 100 t
cross rail adjustment - vertical 3200 mm
z-axis (ram vertical) 2500 mm
x-axis (support horizontal) -2500 / +2500 mm
turning speed range I 0,45 - 21 U/min
turning speed range II 1,7 - 80 U/min
torque - table 125 kNm
feed speeds x+z, infinitely variable 0,1 - 3000 mm/min
rapid speed x+z 8000 mm/min
total power requirement 257 kVA
weight of the mac...
serial number 127418
Control M Plus
axis stroke (X,Y,Z) 1 mm
taper ISO ISO40
changer großer
table: 600 x 1.300 mm
I3euter
spindle 6.000 Umlauf
Weight 8,9 kg
Technical data baler
Manufacturer Bollegraaf
Typ HBK 25
Year of construction 1987 / 1996 completely overhauled at the Bollegraaf factory
Press power 25 tons
Feed channel 1,050 x 800 mm (l x w)
Theoretic throughput rate 160 m³/hour
Bale size 900 x 800 mm (w x h)
Driving motor 18,5 kW
Tying system 4-fold horizontal, fully automatic
Transport dimensions only baler 6,400 x 2,000 x 2,500 mm (l x w x h)
Machine weight baler 7,5 tons
Condition of the baler:
The press is in a good condition, works per...
Traverses X Y Z: 406 x 305 x 254mm,
Table 914 x 305mm,
Bw70vdt2z3
Spindle taper BT40,
7.5Hp Spindle Motor giving 6000rpm,
HAAS Control,
10 Station ATC,
Coolant.
x-travel 1080 mm
y-travel 710 mm
z-travel 710 mm
Control CNC - iTNC 530
total power requirement 26 kW
weight of the machine ca. 12 t
Bt8wijkyks
DMU 100 T 5-axis simultaneous machining center
Year of construction 2003
Control type iTNC 530
x-way 1080 mm
y-way 710 mm
z-way 710 mm
Speed ??24,000 rpm
Feed speed 20-15,000 mm / min
Rapid traverse X / Y / Z 30/30/30 m / min
32-fold tool changer
HSK 63 spindle taper
Table surface area 800 / 1,500 x 800 mm
Total power requirement 26 kW
Machine weigh...
Ref. -No.: 10144
Brand: DECKEL
Type of control: CNC
Control: Heidenhain Mill Plus
Storage location: Halberstadt
Country of origin: Deutschland
Machine-No.: 11130000713
X-Travel: 880 mm
Bw9zulcwvg
Y-Travel: 630 mm
Z-Travel: 630 mm
Operating hours: 42.340 H
Further information:
Video:
?v=Rcd7gD8mg-w
Additional information:
• Table: swivel milling head
