New horizontal semi-automatic baler perfect for volume reduction of cardboard, plasctic, foil etc. Produces europallet bale weight around 400 kg. 40 tones pressing force. Ready bale dimensions 76x92x80-105cm lenght / weight adjustable. Siemens 7,5kW Engine.
Machine produced on demand. Production time, arround 60 – 75 Working days.
Technical specification:
Model: HSAB400
Producer: EKO MiLPAP
Production Country: Poland
Main Engine: 7,5 kW
Bgonbngisa
Power Supply: 400 V
Machine Dimensions: 135 x ...
5
Second hand horizontal semiautomatic HSM HL4010 balers - 2 units available. Machines were working only on cardboard and plastic film, after full renovation, service and painting by authorised service. Fully operational, and ready to work. attached photos were taken before renovation.
Technical data:
Pressing force: 400 kN
engine 7.5 + 1.1 kW
Voltage / frequency 3 x 400 V / 50 Hz
Loading aperture (L x W) 1050 x 690 mm
Bale weight (depending on material) up to 300 kg
Buphrhbs
Bale dimensions (L ...
9
In this auction we would like to present you:
CK 450 H horizontal semi-automatic baler
The machine is used, but in very good condition, ready for work!
Price: 23 000 euros net
Technical details:
Pressing power: 50 tonnes
Bale dimension: 750 x 1150 x 1200 mm
Pxzxzs7p
Bale Weight: up to 500 kg (cardboard)
Machine dimensions (H x W x L): 1790 x 1600 x 5380 mm
Weight of the machine: 5500 kg
Inlet size: 1320 x 1045 mm
Empty cycle time: 87 s
Wiring: 4 wires, vertical binding
Power supply: 415 V (3-...
5
Horizontal fully automatic baler Avermann Avos 1410-37/70
Used machine with conveyor belt, checked and tested, in working order
Price: 29 000 euros (net price)
Conveyor belt: 9000 euros (net price)
Technical details:
Dimensions of the machine: 8400 x 2400 x 3770 mm
Inlet size: 1400 x 1000 mm
Weight of the machine: 19 tonnes
Bale size: 1100 x 700 mm (length can be regulated)
Bale weight: up to 550 kg (depends on the waste type)
Empty cycle time: 12 seconds
Pressing power: 700 kN
Motor: 37 kW...
10
Horizontal baler 800+
75 tons of pressing power
Completely new machine!
Prize : 43 000 Euro’s (net price)
Technical specifications:
• Bale dimensions: 2565mm x 1800mm x 7040mm
• Baler weight (kg): 7500kg
• The size of the inlet: (height and width) 1800mm x 920mm
• Bale size: (height x width) 1100mm 1050mm
• Bale weight: +/- 820kg
Bi7q2bcwjk
• Wiring bales: 3 – 3.9mm
• Number of wires: 4
• Direction of wiring: vertically
• Pressure: 250 bar
• The size of the pump: 76,7cc, 14,5cc
• The numbe...
6
Our company Bartontech ltd from Poland has a pleasure to become the official distributor of the Turkish company PAM, which produce fully automatic balers and other recycling machinery. In this auction we offer
Horizontal automatic baler PAM, model Super 125
D0ypeazxy
Basic technical details:
Main engine: 55 kW
Bale size: 1100 mm x 1100 mm x length regulated
Empty cycle time: 26 seconds
Oil tank: 1800 litres
Capacity: Up to 13 tonnes per hour
Bale weight: 800-1200 kg
Pressing power: Maximum 125...
5
Our company Bartontech ltd from Poland has a pleasure to become the official distributor of the Turkish company PAM, which produce fully automatic balers and other recycling machinery. In this auction we offer
Horizontal automatic baler PAM, model Super 100
Basic technical details:
Main motor: 37 kW
Bale size: 1100 mm x 750 mm x length regulated
Empty cycle time: 20 seconds
Qzzoshm
Oil tank: 1400 litres
Capacity: Up to 7 tonnes per hour
Bale weight: Up to 700 kg
Pressing power: maximum 99 ton...
6
Our company Bartontech ltd from Poland has a pleasure to become the official distributor of the Turkish company PAM, which produce fully automatic balers and other recycling machinery. In this auction we offer
Horizontal automatic baler PAM, model Super 90
Basic technical details:
Main motor: 30 kW
Bale size: 1100 mm x 750 mm x length regulated
Empty cycle time: 22 seconds
Oil tank: 1400 litres
Capacity: Up to 6 tonnes per hour
Bale weight: 500-650 kg
Binding: 4-times
Pressing power: Maximum 8...
6
Our company Bartontech ltd from Poland has a pleasure to become the official distributor of the Turkish company PAM, which produce fully automatic balers and other recycling machinery. In this auction we offer
Horizontal automatic baler PAM, model Super 75 ES
Basic technical details:
Main motor: 22 kW
Bale size: 1100 mm x 750 mm x length regulated
Empty cycle time: 22 seconds
Oil tank: 1000 litres
Capacity: 3-4 tonnes per hour
Bale weight: 400-500 kg
Binding: 4-times
Pressing power: 70 ton
Di...
6
Our company Bartontech ltd from Poland has a pleasure to become the official distributor of the Turkish company PAM, which produce fully automatic balers and other recycling machinery. In this auction we offer
Horizontal automatic baler PAM, model Super 50
Basic technical details:
Main motor: 22 kW
Bale size: 750 mm x 750 mm x length can be regulated
Gknwjcbh
Empty cycle time: 32 sec
Oil tank: 700 litres
Capacity: 1.2-1.5 tonnes per hour
Bale weight: 275-350 kg
Binding: 4-times
Pressing power...
6
Our company Bartontech ltd from Poland has a pleasure to become the official distributor of the Turkish company PAM, which produce fully automatic balers and other recycling machinery. In this auction we offer
Horizontal automatic baler PAM, model Super 40
Basic technical details:
Main motor: 22 kW
Bale size: 750 mm x 750 mm x length can be regulated
Empty cycle time: 29 sec
Oil tank: 700 litres
Capacity: 1.2-1.5 tonnes per hour
Bale weight: 275-350 kg
Binding: 4-times
Pressing power: 40 tonn...
5
In this offer we would like to propose you baler, dedicated for foam, rubber and another bulky waste, designed and produced by Bartontech Poland.
This machine is always new, we produce it on client's order and on the base of client's specifications.
The price depends on client's needs.
Basic technical data:
Bi7deurcpl
Pressing power: 75 tonnes
One empty cycle time: 2 minutes
Engine: 22 kW
Waste compression: 8:1
Binding: 7x, with tape 20 mm
Pressing process: one part of the waste is loaded a...
5
Horizontal baler 600+
50 tons of pressing power
Completely new machine!
Prize : 35 000 euro's (net)
Technical specifications:
• Baler dimensions: (height x width x depth) 2565mm x 1800mm x 5684mm
• Baler weight (kg): 6000kg
• The size of the inlet: (height and width) 1286mm x 720mm
• Bale size: (height x width x depth) 1100mm x 750mm x 1300mm
• Bale weight: 550-600kg
• Wiring bales: 3 – 3.9mm
• Number of wires: 4
• Direction of wiring: vertically
• Pressure: 200 bar
• The size of the pump:...
4
Horizontal baler 400+
Pressing power: 50 tonnes
Completely new machine!
Prize : 30 000 euro's (net price)
Technical specifications:
• Bale dimensions: (height x width x depth) 2232mm x 1600mm x 4560mm
• Baler weight (kg): 5000kg
• The size of the inlet: (height and width) 1045mm x 675mm
• Bale size: (height x width x depth) 750mm x 1150mm x 830mm
• Bale weight: 400-500kg
• Wiring bales: 3 – 3.9mm
• Number of wires: 4
• Direction of wiring: vertically
• Pressure: 200 bar
• The size of the ...
10
x-travel 900 mm
y-travel 800 mm
z-travel 710 mm
rapid traverse X,Y 15 m/min.
rapid traverse Z-axis 15 m/min
tool taper SK 50 DIN 69871A
speeds 4500 U/min
Table area 630 x 630 mm
Tool changer 60 fach
internal coolant system feed 60 bar
drive capacity - spindle motor 20 kW
total power requirement -- kW
weight of the machine ca. 17 t
dimensions of the machine ca. 3,5 x 5,3 x 3,2 m
control iTNC 530
- automatic overload protection
- external operating unit (Manual Pulse Coder)
- direct threading...
2
Horizontal drilling BACCI semi automat
F2lojgmxm
6
Horizontal Mortiser Mortiser MAKA
Horizontal Mortiser MAKA
Type / Model: DB 5
Year of Production: 1969
Condition: Very Good
Specifications:
"Pneumatic control table
"The number of swing arm: 3p.
Duaize
Comments
5
Quills, processing unit, automatic drilling machine, drilling machine, standing drill, multi-spindle drilling machine
Gfvb399
-2x: quill machining units
-1x: Horizontal
-1x: vertical
-Max. Feed: stroke mm
-Speed: rpm
-Built-in drill chucks: 1.5-13 mm
-Dimensions: 1050/1205/H1550 mm
-Weight: 222 kg
Ref. -No.: 10173
Brand: JAESPA
Storage location: Halberstadt
Country of origin: Deutschland
Saw diameter: 300 mm
Further information:
Ø 300
Video:
Mwqvmk
?v=p0qlQZ2kG0E
6
40.000 €
Bidding plus VAT
41 days left
41 days left
Waste paper and cardboard baling press/baler
Bx9auwrv7k
Manufacturer: ITAL-COS Officine Meccaniche Srl
Machine Nr. 210033/A
Model LOGIC-30
Year 45/92
System 6.636
Thoroughly checked and refurbished
Feeding conveyor belt included
8
Ziliani Carlo
Aluminium Can Press
Hopper fed
Working perfect
Páid 38k when new
Bqyqdht
Makes perfect aluminium blocks
7
Gradell Tyre Baler, Working well. Will make a good tyre bale. Can be seen working Ireland a very strong sturdy machine. Great heavy bales.
Cbhrjqkm
10
Bollegraff Baler HBC 40A
Complete with Infloor Conveyor
Fully Automatic
Suitable For
Cardboard
Plastic
RDF
SRF
Bale size can be adjusted
1000mm x 720mm
Hopper to chamber 1000mm x 1250mm
Cycle Time 35 secs
Number of wire ties x 4
18.5kw drive
Chdjrass
Twistomat 2.2kw
Complete with Operations Manuel
Wiring Diagram
Control panel
All in working condition and ready for work
8
CNC Control: Okuma OSP-P200M
Table size: 630 x 630 mm .
Number of pallets: 2.
Movement X-Axis: 1000 mm.
Movement Y-Axis: 900 mm.
Movement Z-Axis: 1000 mm .
Table index: 0,001°.
Number of tools in magazine: 40x .
C7bnavnsq
Maximum spindle speed: 12.000 min.
Tool taper: ISO 50
With lots of extra options
If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.
Feel free to view our other advertisements for a complete overview of our stock.
15
Technical data baler
Manufacturer Bollegraaf
Typ HBC 80 A
Year of construction 1997
Hours of operation 21,545 hours
Press power main press 78 tons
Press power of pre-press 42 tons
Feed channel 1,485 x 720 mm (l x w)
Filling volume 2,9 m³
Theoretic cycle time 22 sec.
Bale size 720 x 1,100 mm (h x w)
Drive power 45 kW
Connected load 60 kW
Tying system 5-fold, vertical, fully automatic
Throughput capacity at a
bulk weight of 20 kg/cbm approx. 9,0 tons/hour
bulk weight of 50 kg/cbm approx. 18,5 to...
6
UZAY Semi-automatic Horizontal Bandsaw
Type: UMSY 220G
Year:1999
Saw blade dimensions:3000x27x0.9mm
Cutting speed:40/80m/min
Capacity 90°:⌀220mm, 200x300mm
Capacity 30°:⌀220mm, 240x200mm
Capacity 45°:⌀140mm, 130x130mm-180x120mm
Capacity 60°:⌀130mm, 130x160mm
Working height:960mm
Machine size-LWH:1950x1600x1700mm
Machine weight:350kg
C3jmd20r3
Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in goo...
6
pressure 40 t
stroke 250 mm
flat steel 120 x 25 mm
working feed 8,0 mm/sec
return speed 30,0 mm/min
work height max. 950 mm
table: 625 x 1100 mm
total power requirement 4,0 kW
B2vigkig
motor 400 Volt 50 Hz
weight 900 kg
range L-W-H 1200 x 1150 x 950 mm
3
3 SCHIESS Vertical Lathes WITHOUT ACCESSORIES
1 VERTICAL LATHE n°1 cnc machine FAGOR
HEIGHT UNDER BEAM : 3m100
CAPACITY : 80 tons
MACHINING DIAMETERS : 4500 mm
PLATFORM DIAMETER : 5m500
SWIVEL TOOL HEADS
Bzhmmhnthv
PLATFORM DIAMETER : 5m500
1 VERTICAL LATHE n°2 cnc machine FAGOR
HEIGHT UNDER BEAM : 3m300
DIAMETER OF TRAY : 3m00
SWIVEL TOOL HEADS
1 VERTICAL LATHE n°3 cnc machine FAGOR
HEIGHT UNDER BEAM : 4m400
DIAMETER OF TRAY : 6m00
SWIVELLING TOOL HOLDER HEADS
1 horizontal lathe RAVENSBURG cnc ...
Quality and reliability are at the heart of the new Alpha 8. The wrapper has been designed to include a stronger, simpler and more accessible end seal system, which is quieter, and more reliable with higher sealing pressure. Other notable developments with the Alpha 8 wrapper is a shorter film route for reducing film waste, stainless steel film rollers for increased hygiene, and improvements to the operation panel for safety, security and easiness.
Bw9q8jjvub
Table size 630 x 630 mm.
Number of pallets 2.
Movement x-Axis 1050 mm.
y-Axis 800 mm .
z-Axis 880 mm.
Table index 1°.
Bzpiwsn20k
Number of tools in magazine 80 pieces.
Maximum spindle speed 35-7.000 min.
Tool taper MAS BT-50.
CNC Control Mazatrol Fusion 640M
If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.
Feel free to view our other advertisements for a complete overview of our stock.
cutting diameter 0450 mm
saw band length 5850 mm
cutting width 1,3 mm
capacity 90 degrees: square 450 x 450 mm
capacity 90 degrees: flat 450 x 600 mm
sawing stroke 752 mm
feed in one step 400 mm
height of blade 41 mm
total power requirement 8,5 kW
weight of the machine ca. 2 t
dimensions of the machine ca. 3,1 x 1,6 x 2 m
C3wvg2jc
New horizontal full automatic bandsaw. Machine is a two column type.
Machine is complete with sawing blade ready for work. Material feeding by servo
motor. All oth...
15
TOS Horizontal Boring Machine with DROs
Type:WH80
Year:1971
Spindle diameter:80mm
2tm8re
Spindle taper:5 Morse
Maximum diameter of the boring spindle:450mm
Maximum depth of drilling:710mm
Spindle stroke:900:mm
Clamping table surface:1000x1000mm
Spindle speeds(21):14-1400rpm
Machine floor space 2400x4600mm
Machine weight 10,000 kg
Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good fai...
5
pressure 80 t
stroke 285 mm
flat steel 300 x 25 mm
working feed 10,0 mm/sec
return speed 10,0 mm/min
work height max. 930 mm
table: 750 x 1425 mm
total power requirement 10,0 kW
motor 400 Volt 50 Hz
weight 1700 kg
range L-W-H 1500 x 750 x 1800 mm
oil volume 120 l
Furnishing :
- hydraulic horizontal bending machine
- Solid work surface made of stabilized steel
Dyhedmd
- Machine made of hardened and ground forged steel
- Digital display for stroke adjustment
- 1x tool kit
- Double foot switc
5
grinding length:500 mm
grinding width:200 mm
workpiece height:280 mm
Table area:700 x 200 mm
spindle turning speed - stepless:1000 - 4000 U/min
feeds of table:1 - 20 m/min
infeed of wheel carriage:0,001 - 0,01 mm
grinding wheel dia. x width:225 x 25 x 51 mm
weight of the machine ca.:1,7 t
total power requirement:4 kW
dimensions of the machine ca.:2,6 x 1,6 x 1,8 m
Eips3rz9g
3
cutting diameter 1600 mm
saw band length 11000 mm
cutting width 1,6 mm
capacity 90 degrees: square 1600 X 1600 mm
capacity 90 degrees: flat 1600 X 2500 mm
total power requirement 11 kW
weight of the machine ca. 19 t
dimensions of the machine ca. 4000 X 8400 X 3500 m
Fw2o3an
New horizontal semiautomatic bandsaw. Machine is a two column type. Machine
has a loading table with automatic feed. Machine is complete with sawing blade
ready for work. Machine has a feeding table infront of the machin...
8
CNC Control: Mazatrol M-Plus.
Table size: 630 x 630 mm .
Number of pallets: 2.
Movement X-Axis: 1050 mm.
Movement Y-Axis: 800 mm.
Movement Z-Axis: 825 mm .
Table index: 0,001°.
Number of tools in magazine: 40x .
Maximum spindle speed: 35-10.000 min.
C0gh2ece
Tool taper: CAT 50
If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.
Feel free to view our other advertisements for a complete overview of our stock.
1
cutting diameter 0350 mm
saw band length 4250 mm
cutting width 1,1 mm
capacity 90 degrees: flat 350 x 400 mm
capacity 90 degrees: square 350 x 350 mm
feed length 0 - 400 mm
total power requirement 5,5 kW
weight of the machine ca. 1,8 t
dimensions of the machine ca. 2,45 x 1,97 x 1,5 m
Ctmti3tk
Full automatic bandsaw for straight cuts of material. Machine has an automatic
material feeding system driven by servo drive. The length of the material which
could not been cut is 40 mm (rest length)...
13
Still Order Picker
2sgn37vf
Delivery and exchange possible throughout the Netherlands.
- 2000 kg- 2400mm forks- Few hours- Platform up to 890mm for higher order picking- Delivery possible
7
pressure 40 t
stroke 285 mm
flat steel 250 x 24 mm
working feed 10,0 mm/sec
B2uvd9ae
return speed 10,0 mm/min
work height max. 930 mm
table: 660 x 1250 mm
total power requirement 4,0 kW
motor 400 Volt 50 Hz
weight 1450 kg
range L-W-H 1450 x 650 x 1800 mm
oil volume 40,0 l
Furnishing :
- hydraulic horizontal bending machine
- Solid work surface made of stabilized steel
- Machine made of hardened and ground forged steel
- Digital display for stroke adjustment
- 1x tool kit
- Double foot switch
7
cutting diameter 350 mm
saw band length 4640 x 34 x 1,1 mm
cutting width 350 mm
Control NC 5.0
band speed 15 - 100 m/min
capacity 90 degrees: square 350 x 350 mm
table height 860 mm
total power requirement 4 kW
weight of the machine ca. 2,8 t
dimensions of the machine ca. 3,1 x 2,2 x 2,2 m
Shark 350 NC HS 5.0, automatic hydraulic band saw machine in two-column design
for 0 ° cuts on solid material and profiles made of steel, stainless steel and
steel alloys
up to a maximum of 350x350 mm. T...
5
x-travel 500 mm
table size 300 x 900 mm
Bfeke9xggt
weight of the machine ca. 1,5 t
5
Table size 400 x 400 mm.
Number of pallets 6.
Movement x-Axis 560 mm.
y-Axis 560 mm.
z-Axis 510 mm.
Table indexing 1° .
Number of tools in magazine 60 pieces.
Maximum spindle speed 12.000 tr/min.
Tool taper CAT 40
Yua2hw
CNC Control M-Plus
If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.
Feel free to view our other advertisements for a complete overview of our stock.
1
cutting diameter:540 mm
saw band length:6000 mm
Bxga7x2377
cutting width:750 mm
round:540 mm
flat material:750x540 mm
cutting diameter 0750 mm
saw band length 8920 mm
cutting width 1,6 mm
capacity 90 degrees: square 650 x 650 mm
Bb2c3db
capacity 90 degrees: flat 550 x 1000 mm
capacity 45 degrees: round 650 mm
capacity 45 degrees: square 650 x 650 mm
capacity 45 degrees: flat 600 x 700 mm
capacity 60 degrees: round 750 mm
capacity 60 degrees: square 650 x 650 mm
capacity 60 degrees: flat 600 x 800 mm
total power requirement 9 kW
weight of the machine ca. 5 t
dimensions of the machine ca. 4,5 x 2,2 x 3 m
New h...
2
cutting diameter 0650 mm
saw band length 8200 mm
cutting width 1,6 mm
capacity 90 degrees: square 650 x 650 mm
capacity 90 degrees: flat 650 x 850 mm
feed length 1-1400 mm
sawing stroke 0-700 mm
coolant tank 120 l
hydraulic power unit 36 l
total power requirement 10 kW
Bku8rsabq3
weight of the machine ca. 8 t
dimensions of the machine ca. 4,5 x 1,4 x 2,75 m
New horizontal full automatic bandsaw. Machine is a two column type with linear
guides. Machine automatic material feed and bundle clamp...
8