Used All Electric Injection Molding Machine for sale (91,449)

Condition: excellent (used), Year of construction: 2007, operating hours: 20,357 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 25 mm, displacement volume: 59 cm³, injection weight: 56 g, overall weight: 6,000 kg, Equipment: documentation/manual, Here we offer the following well-maintained used injection moulding machine as part of our injection moulding machine dealership. Isdpfxjx Ak I Is Aaleap Of course, we are also actively purchasing well-maintained injection moulding machines from model year 2010 onwards. We have been a wholesale supplier of used injection moulding machines for over 25 years. Current note – Tax information and benefit for used machines: As of 01.07.2025, used machines may also be depreciated using the special 30% annual depreciation allowance. In addition to the lower purchase cost compared to a new machine, you can claim the same depreciation amounts as for a new machine. Reference: Growth Booster (§ 7 Section 2 EStG-E) Vertical injection moulding machine – thermoplastics, with rotary table, 2 or 4 stations Manufacturer: Battenfeld Model: Vertikal R 60 / 125 H Control: B4 Year: 2007 Machine number: 130953 – 100 Vertical machine with rotary table / 2-4 stations (750 mm) Operating hours: 20,357 h Injection unit (125) Screw diameter: 25 mm Screw length: 21.6 L/D Shot volume: 58.9 cm³ Shot weight: 53.6 g Heating capacity: 6.78 kW Heating zones: 4 Nozzle stroke: 200 mm Injection pressure: 2,149 bar Clamping unit Clamping force: 60 tons / 600 kN Opening stroke: 250 mm Min. mould installation height: 250 mm Ejector stroke: 150 mm Max. platen distance: 500 mm Rotary table diameter: 1,040 mm Weight: 6,000 kg Extras: - Light curtain - Automatic suction loader Simar FX 2504, year 2013 - Water manifold - Air valve

Condition: excellent (used), Year of construction: 2004, operating hours: 30,665 h, functionality: fully functional, machine/vehicle number: 196184, clamping force: 1,500 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, Equipment: documentation/manual, Here we, as a trading company for injection moulding machines, are offering the following well-maintained used injection moulding machine. Of course, we also purchase well-maintained injection moulding machines from the year of manufacture 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current notice – Tax information and advantage for used machinery: From 01.07.2025, used machines will also be eligible for a special depreciation allowance of 30% per year for tax purposes. In addition to the more attractive price compared to a new machine, you may claim the same depreciation amounts as with new equipment (ref: Growth Booster, § 7 Abs. 2 EStG-E). Used Injection Moulding Machine with 2 additional available injection units (25 mm and 35 mm) Machine is currently fitted with a 50 mm injection unit. See document for download. Manufacturer: Arburg Type: 470C 1500-350 Year of manufacture: 11/2004 Machine No.: 196184 Control system: Selogica Operating hours: 30,665 h Regularly serviced by manufacturer Clamping Unit Clamping force: 1500 kN / 150 tons Tie bar spacing: 470 x 470 mm Mould mounting plates: 650 x 650 mm Ejector stroke: 175 mm Opening stroke: 500 mm Mould installation height: 250 mm Maximum daylight between platens: 750 mm Injection Unit 50 mm (high wear-resistant) Shot volume: 392 ccm Shot weight: 359 g Screw diameter: 50 mm Injection pressure: 1670 bar Extras - 2 additional injection units: 25 mm and 30 mm Isdpfx Aaew Rm Hdoleap - 1 x core pull - Conveyor belt installed in machine bed - Handling interface - Geiger part removal device - Selection unit - 2 x air blowing ports - Accumulator for fast injection - Electrical connection for pneumatic shut-off nozzle - Technology level 2: servo-driven proportional pumps - 9 electrical heating circuits - Interface for mould temperature control unit - Interface for dosing unit - Equipment package - Extended monitoring, extended movement controls, production control, optimisation/operator guidance, quality assurance, documentation Visible peripheral devices not explicitly named are not included in the scope of delivery. - Immediately available from our warehouse in Hanover. Free loading or free delivered, subject to shipping costs - Function tested (guaranteed functionality up to initial commissioning)

Condition: like new (used), Year of construction: 2008, operating hours: 72,967 h, functionality: fully functional, machine/vehicle number: 208574, screw diameter: 18 mm, displacement volume: 23 cm³, Equipment: documentation/manual, Here we offer the following well-maintained pre-owned injection moulding machine as part of our injection moulding machinery trade. Naturally, we also purchase well-maintained injection moulding machines from the current year 2010 onwards. We have been a wholesale dealer of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 270C 400-70 Control unit: Selogica Year of manufacture: 2008 Operating hours: 75,942 h Machine number: 208574 Extras - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Diverter chute The machine has retrofitted interfaces for: - Tool temperature - Heated runner - Colour / dosing via Siemens Logo PLC control German language - Single owner – origin Germany Regular maintenance by the manufacturer and previous owner Clamping Unit Clamping force: 400 kN / 40 t Tie bar spacing: 270 x 270 mm Platen dimensions: 446 x 446 mm Opening stroke: 350 mm Mould height: 200 mm min. Max. platen distance: 550 mm Ejector stroke: 125 mm Ejector force: max. 30 kN Injection Unit Screw diameter: 18 mm Injection volume: 23 ccm Shot weight: 21 g Injection pressure: 2,500 bar Electrical Pump: 11 kW Heating: 4 zones, 4 kW Installed power: 15 kW Main fuse: 50 A Weight: 2,150 kg Warranty Warranty up to first commissioning Loading/Shipping Free loading on buyer’s truck, or free delivery within Germany against transport charge Available from our warehouse in Hannover, Germany Information about our machines and our company: - We only sell machines purchased from active production for our own stock in Hannover - All machines for sale are inspected and tested prior to dismantling - We do NOT sell insolvency assets – we are NOT brokers dealing in third-party equipment - All machines on offer come from successful companies for whom maintenance is a standard - All machines offered are available for inspection at our warehouse Iaodswn Nr Espfx Aaljp

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Here we offer a very well maintained constantly serviced injection molding machine. complete maintenance by manufacturer until current Injection molding machine: Manufacturer / Type: Krauss-Maffei KM80 220 C2 Serial No.: 61006272 Iaodpfxsh Dr E Tj Aalep year of construction: 2004 Control system: MC4 Clamping unit clamping force: 800 kN /80 tons tie bar distance: 405 x 405 mm Mold installation height min.: 250 mm platen distance max.: 750 mm Clamping platens standard: 610 x 610 mm ejector stroke: 150 mm core pull: 1x pcs. Injection unit Injection unit / cylinder ø30 mm Shot weight max. (ø30):: 77g/hp Injection flow: 73cm³/sec Spec. injection pressure: 2500 bar Handling interface: Euromap 12 Inking interface: Yes Dimensions & Weights Weight with control cabinet: 3,8 t Length: 3800 mm Width (machine only): 1050 mm Height: 1890 mm Oil filling: 270 L Location: Hannover / Lower Saxony The machine is very well maintained and can be inspected under power. Peripherals that may be pictured are NOT part of the offer! The machine available now in our warehouse free loaded on truck of the buyer or free to the door against freight reimbursement

Condition: like new (used), Year of construction: 2008, operating hours: 58,000 h, functionality: fully functional, super well-maintained injection molding machine from clean room (pharmaceutical production) - fully functional with functional guarantee - with GEKU SR 500 ST. linear robot - perfect optical condition Technical data Manufacturer Engel Type e-max 200/100 serial number 170609 Year of construction 2008 Operating hours 58774 h approx. Dimensions L/W/H 4.0 x 1.3 x 1.9 mtr. Weight 3,900 kg Fully functional Iaedpeubamvofx Aalsp Condition excellent Clean room Special Control unit CC200 Screw ⌀ 25 mm Injection weight 55 gr./hp Injection pressure 2400 bar Injection volume 59 ccm Clamping force 1000 kN / 100 to. Distance between tie bars 460 x 410 Clamping platens 650 x 600 mm mold mounting height 150-450 mm max distance between platens 800 mm Opening stroke 350 mm Ejector stroke / force 100 mm / 25 kN Clamping unit electric Connected load: 45 KW Rated current: 69 A The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Extras GEKU Robot SR 500 ST Simotion control X-axis: 600 mm Y-axis: 1400 mm vertical Z-axis: 2500 mm horizontal A-folding axis: SWM 45 C-axis : Servo Gripper: SWS16 B-axis: not available Guarantee Warranty until first commissioning Loading/shipping FCA-free loading on the buyer's truck or free delivery against freight reimbursement from our warehouse in Hanover /Germany Financing On request - installment plan option Price: On request

Condition: excellent (used), Year of construction: 2006, operating hours: 69,000 h, functionality: fully functional, Here we offer a permanent maintained injection molding machine. from the following machine we have other machines of the same type and same year in stock also with Geiger Robot Manufacturer Engel Type Victory 200/80 Tech year of construction: 2006 Control system: CC 200 Extras -installed Languages: German Englisch -25 mm (wear and corrosion protected) - control CC200 - enlarged clamping plates (B plates) - minimum installation height 250 mm - maximum platen distance 700 mm - quality switch / PD protocol + graphics - 5 x CEE 400 V / 3 x Schuko 230 V - 4 freely programmable inputs and outputs - handling interface Euromap 12 - Host computer interface Engel EMS - Geiger EA Mini 2001 SLI (#156686 0504 4417 / year 2005) - without material hopper or conveyor Clamping unit clamping force: 80 to./ 800 kN tie bar dimension: tie bar-less clamping platens: 730 x 600 (hxv) platen distance: 700 mm max installation height: 250 mm min. opening stroke: 450 mm Injection unit screw diameter 25 mm stroke volume: 69 ccm injection pressure: 2090 bar / 2400 increased Weight: 5,200 kg. dimensions: 4,00 mtr. x 1,40 mtr. x 2,00 mtr LxWxH from our warehouse Hannover /Germany free loading on truck of the buyer or free delivery against freight reimbursement Viewing under electric power possible Iodpfx Aajm Nclvsleap functional guarantee

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Here we offer a very well maintained constantly serviced injection molding machine complete maintenance by manufacturer until current Injection molding machine Krauss-Maffei KM 65-160 C2 Injection molding machine: Manufacturer / Type: Krauss-Maffei KM65 160 C2 Serial No.: 61007063 Year of manufacture: 2005 Control system: MC4 complete annual maintenance by the manufacturer clamping unit: clamping force: 650kN /65 tons tie bar distance: 405 x 405mm mold installation height min.: 250mm platen distance max.: 750mm Clamping platens standard: 610 x 610mm ejector stroke: 150mm core pull: 1 x pcs. Injection unit Injection unit size / cylinder ø: 160 / cylinder ø25mm and cylinder ø18mm Shot weight max (ø25): 47g/PS Injection flow: 63cm³/sec Spec. injection pressure: max. 2500 bar Handling interface: Euromap 12 Inking interface: Yes Dimensions & weights: Weight with control cabinet: 3.8 t Length: 3800mm Width (machine only): 1050mm Height: 1890mm Oil filling: 270 L Location: Hannover / Lower Saxony The machine is very well maintained and can be inspected under power. Peripherals that may be pictured are NOT part of the offer! The machine is available now in our warehouse Iajdpfx Ajh Dp R Ejaljp free loaded on truck of the buyer or free to the door against freight reimbursement

Condition: like new (used), Year of construction: 2004, operating hours: 30,665 h, functionality: fully functional, machine/vehicle number: 196184, clamping force: 1,500 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, Equipment: documentation/manual, Used injection moulding machine – with 3 interchangeable injection units (25, 35, and 50 mm) Currently fitted with 50 mm unit Includes Geiger picker, integrated conveyor belt From ongoing German production, fully functional See document for download Manufacturer: Arburg Model: 470C 1500-350 Year of manufacture: 11/2004 Machine No.: 196184 Control system: Selogica Operating hours: 30,665 h Regularly serviced by manufacturer Ijdpjvhb Iysfx Aaleap Clamping unit: - Clamping force: 1,500 kN / 150 tons - Tie bar distance: 470 x 470 mm - Platen size: 650 x 650 mm - Ejector stroke: 175 mm - Opening stroke: 500 mm - Min. mould height: 250 mm - Max. daylight between platens: 750 mm Injection unit (50 mm): - Shot volume: 392 cm³ - Shot weight: 350 g - Screw diameter: 50 mm - Injection pressure: 1,670 bar Alternatively, 25 mm and 35 mm injection units included Extras: - Geiger picker - Handling interface - 2x air blow-offs - Accumulator for fast injection - 9 electric heating zones - 4 free cooling circuits - Optional equipment packages: Extended monitoring, enhanced motion controls, production management, process optimisation / operator aids, quality assurance, documentation - Electric conveyor belt - Sorting unit Documentation and software available in German (fully comprehensive) - Immediately available from our Hannover warehouse, loaded ex works or delivered (shipping at cost) - Function tested (guaranteed function up to first commissioning)

Condition: excellent (used), Year of construction: 2010, operating hours: 78,394 h, functionality: fully functional, machine/vehicle number: 213142, clamping force: 400 kN, screw diameter: 18 mm, displacement volume: 23 cm³, Here we offer the following well-maintained used injection moulding machine as trading specialists in injection moulding machines. Of course, we also purchase well-maintained injection moulding machines from model year 2010 or newer. We have been major dealers of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 270C 400-70 Control unit: Selogica Year of manufacture: 2010 Operating hours: 78,394 h (screw and barrel replaced) Machine number: 213142 Extras: - Robot interface - High-wear resistant screw - CF drive - Complete documentation and software (on CF card) - Diverter valve The machine is retrofitted with interfaces for: - Tool temperature - Heating channel - Colour/additive dosing Via Siemens Logo PLC control Iodpfx Aasx Rvcvslsap German language - First owner – originally from Germany Regular maintenance carried out by the manufacturer and previous owner. Clamping unit: Clamping force: 400 kN / 40 tons Tie bar spacing: 270 x 270 mm Mounting plates: 446 x 446 mm Opening stroke: 350 mm Mould height: 200 mm min. Maximum distance between plates: 550 mm Ejector stroke: 125 mm Ejector force: 30 kN max. Injection unit: Screw diameter: 18 mm Injection volume: 23 cc Shot weight: 21 g Injection pressure: 2500 bar Electrical specifications: Pump: 11 kW Heater: 4 zones, 4 kW Total installed power: 15 kW Main fuse: 50A Weight: 2,150 kg Warranty: Warranty provided up to first commissioning Loading/shipping: Free loading onto buyer’s truck or delivered free to destination against freight reimbursement Available from our warehouse in Hannover, Germany

Year of construction: 2021, condition: used, machine/vehicle number: 202112108066695, Max. clamping force: 10,800 kN, tie bar spacing: 1,260x1,100 mm, min./max. mold installation height: 500/1,200 mm, ejector force: 230 kN, max. opening stroke: 2,400 mm, mold opening travel: 1,900/1,200 mm, screw diameter: 110 mm, max. motor output: 112 kW, machine weight: approx. 48,000 kg, recorded operating hours: 19,413, recorded load hours: 7,526, equipped with KEBA i2985 control, Sepro Strong 50TE handling system, transport conveyor from MB type PALL year 2022 approx. 700x120 cm, partial mesh enclosure (WITHOUT: PIOVAN dosing unit, WITHOUT temperature control units) Iaedpfsyn Nh Ejx Aalsp

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 161729, clamping force: 1,000 kN, screw diameter: 40 mm, injection weight: 158 g, ejector force: 40,000 N, total length: 4,225 mm, total width: 1,370 mm, total height: 1,200 mm, overall weight: 3,080 kg, heating capacity: 5.5 kW (7.48 HP), pump power: 18,500 W, power: 24.3 kW (33.04 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 380 V, input current: 96 A, Equipment: documentation/manual, We are offering this used Arburg 370M 1000-250 injection moulding machine, year of manufacture 1994. Serial number: 161729 Iaedpfx Aasyrczgelop Year: 1994 Operating voltage: 380 V 3~ 50 Hz Control voltage (230 V): 220 V ~ 50 Hz Control circuit voltage: 24 V = Total rated current: 96.00 A Total connected load: 55.0 kW Drive upgraded to xD card! If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2017, operating hours: 1,437 h, functionality: fully functional, machine/vehicle number: 137949-100, clamping force: 2,100 kN, screw diameter: 65 mm, displacement volume: 913 cm³, injection pressure: 1,600 bar, overall weight: 10,500 kg, controller model: UNILOG B8, The machine was serviced and upgraded to the latest standards by the manufacturer in 2021! It has not been used since and is therefore in very good condition! The machine is offered complete with 2 Kistler modules for cavity pressure control! TECHNICAL DETAILS Plastic type: Thermoset Clamping force: 2,100 kN Screw diameter: 65 mm Screw stroke: 275 mm Screw L/D ratio: 22 Max. screw speed: 278 rpm Screw torque: 1,920 Nm Tie bar spacing (HxV): 670 x 620 mm Mold installation height: 350 mm Platen daylight: 1,100 mm Opening stroke: 750 mm Ejector stroke: 200 mm Ejector force: 65 kN Theoretical shot volume: 913 cm³ Specific injection pressure: 1,600 bar Max. plasticising rate: 62 g/s Nozzle stroke / nozzle force: 400 mm / 100 kN Free-shot injection rate: 419 cm³/s Barrel heater power: 27 kW Number of heating zones incl. nozzle: 5 MACHINE DETAILS Control system: UNILOG B8 Hydraulics Hydraulic oil tank capacity: 600 liters Oil temperature min/max (HLP 32): 30 °C / 40 °C Oil temperature min/max (HLP 46): 40 °C / 50 °C Oil cooling activation temperature (HLP 32): 35 °C Oil cooling activation temperature (HLP 46): 45 °C Electrical Drive power hydraulic pump: 37 kW Max. screw barrel temperature: 350 °C Cooling water system Cooling water consumption: approx. 0.5 - 1.5 m³/h Max. cooling water supply temperature: 35 °C Cooling water return: max. 10 bar Iaedpjyi Ailefx Aaljp Ambient temperature: °C Noise level: 65 dB(A) Weight: 10,500 kg Operating hours: 1,437 h EQUIPMENT Kistler module for cavity pressure control, range 1: 20,000 pC Kistler module for cavity pressure control, range 2: 10,000 pC

Condition: used, Year of construction: 2005, Injection Moulding Machine Manufacturer: Krauss Maffei Model: KM350 /1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Mould opening force: 220 kN Moving platen drive force: - Opening: 105 kN - Closing: 95 kN Mounting plate (H x V): 1,060 x 1,095 mm Clear space (H x V): 710 x 710 mm Mould opening stroke: 920 mm Minimum mould installation height: 380 mm Maximum daylight: 1,300 mm Iajdpfx Ajxu Uvasalep Ejector stroke: 250 mm Ejector force forward/back: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Temperature control zones (cylinder heating): 6 Dry cycle time: 1,550 1/h Oil filling: 720 l Dimensions and weights: Net weight with control cabinet: approx. 16.0 t (L/W/H): 6,510 x 2,040 x 2,380 mm Maximum mould weight: 4,780 kg Injection unit: Drive capacity: 1900 Screw diameter: 70 mm Injection pressure: 1,778 bar Shot volume: 1,047 cm³ Shot weight for PS: 953 g Injection flow: 527 cm³/s Screw speed standard / option: 285 / 349 rpm Standard or stage 1 screw speed: 95 PS Optional or stage 2 screw speed: 117 PS Nozzle contact force: 82 kN Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated control panel with TFT colour display and 3.5" floppy disk drive for data backup Plasticising: 1 complete thermoplastic plasticising unit in wear-resistant design, screw diameter 70 mm with non-return valve and open nozzle Nozzle radius: 15.00 mm Nozzle bore: 6.00 mm 17326ä

Condition: like new (used), Year of construction: 2020, operating hours: 8,344 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, displacement volume: 392 cm³, Technical Data Clamping Unit Clamping force: 2000 kN Platen size h x v: 1772 x 800 mm Minimum mold height: 400 mm Maximum daylight: 900 mm Opening stroke: 500 mm Rotary table diameter: 2000 mm Iodsyka A Sspfx Aalsap Ejector stroke: 175 mm Ejector force: 45 kN Mold weight: 6000 kg Technical Data Injection Unit Screw diameter: 50 mm Shot volume: 392 ccm Injection pressure: 2000 bar Screw L/D ratio: 20 l/d Screw stroke: 200 mm Screw speed: 60 rpm Screw torque: 880 Nm Number of heating zones: 8 Nozzle stroke: 400 mm Dimensions & Weight Machine dimensions LxWxH: 4.11 m x 2.65 m x 4.81 m Total weight: 22,000 kg Equipment Display text German Display text English CEE socket 16A Hydraulic core pull 4x Air valve 1x Machine with water battery Machine without material hopper Leveling elements EUROMAP 67 handling interface EUROMAP 73 interface OPC interface

Condition: used, Year of construction: 2013, clamping force: 50 kN, displacement volume: 59 cm³, injection pressure: 2,500 bar, overall weight: 3,700 kg, load hours: 29,000 h, screw conveyor diameter: 25 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: Krauss Maffei Type: KM50-180AX Condition: aus laufender Produktion Operating hours: ca. 26.000 CLAMPING UNIT: - Clamping force: 50 t Öffnungsweg: 300 mm Mould installation height min.: 150 mm Mould installation height max.: 470 mm Tie bar distance (h x v): 410 x 360 mm Plate dimension (h x v): 510 x 460 mm Centering (fix- movingplate): 125 mm INJECTION UNIT: IU180 Screw diameter: 25 mm Injection weight in polystyrol: 54 g Stroke volume: 59 cm³ Einspritzdruck: 2.500 bar CONTROL: MC5 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 2 x (Hydr. Kernzug-Aggregat) Air valves: 2 Hot runner control devices: 6 Robot interface: Euromap 67 Other equipment: Qualitätsüberwachungspacket GENERAL DATA: - Iodeppigdjpfx Aaloap Installed heating capacity: 8,1 kW Pump drive power: entfällt Total installed power: Motor + Heizung Total weight: 3.700 kg Total size L x B x H: 4,4 x 1,6 x 1,9 m

Condition: excellent (used), Year of construction: 2007, operating hours: 81,000 h, Technical data Year of manufacture: 2007 Clamping unit Clamping force: 1300 t Max. opening stroke/mounting height: 2300 mm Max. distance between platens: 4000 mm Min./max. mould height: 1000 - 1700 mm Max. platen height: 1910 mm Min. mould size: 1000 - 1700 mm Clear tie bar spacing: 1500 mm Nozzle radius: R40 mm Iasdpfx Asyifgksalsp Mould weight: 29000 kg Ejector stroke: 350 mm Injection unit Screw diameter: 135 mm Stroke volume: 8588 ccm Core pulls AWS/DS: 1/1 Needle shut-off pneumatics: 1 The machine is supplied with a Kuka robot and can be inspected in operation.

Condition: ready for operation (used), Year of construction: 2004, PET preform injection molding machine clamping force 320t injection weight 6935gr. screw 130mm preform removal system SERVO IV, TPS robot TRT-M4-72-E, 72-fold, 4-stage, incl. removal set, conveyor belt LT/h 1825 Output approx. 17,000 preforms/hour Option1: MHT mold 72-cavity for 30.8 gr. PCO 1810 or 1881 (shorty, 28mm neck ring, 1.5 liter bottles) Option2: 72 core sets for 27.8 gr. PCO 1810 or 1881 (shorty, 28mm neck ring, 1.0 liter bottles) Iaodjnxkxwopfx Aalop Line comes from our own preform production and was in production until our new line was replaced.

Condition: excellent (used), Year of construction: 2019, Clamping force 500 kN Opening force 40 kN Opening stroke 250 mm Screw diameter 15 mm Iasdpfx Aoxrymlsalsp Including 2 pcs. WITTMANN temperature control units Including spare screw 15 mm Including complete documentation

Condition: excellent (used), Year of construction: 2017, operating hours: 14,500 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter und Drehteller Hersteller: ARBURG Typ: 470S1100-400/290 Iodpfx Aou E E Suoaleap Baujahr: 2017 Schließkraft: 110 Tonnen Holmabstand 420 x 420 mm Einbauhöhe min. /max.: 450 mm Öffnungsweg: 950 mm Schnecken DN 1: 35 mm Max. Hubvolumen: 154 cm³ Spritzteilgewicht: 141 g/PS Schnecken DN 2: 30 mm Hubvolumen: 106 cm³ Spritzteilgewicht: 97 g/PS Steuerung: SELGOCIA Ausstattung: 3 x Kernzüge Vertikale Spritzeinheit Drehteller 6 - ACHS Roboter, Hersteller: KUKA, Typ: KR 16 Wikut, Baujahr: 2010 Förderband Schutzzaun

Condition: ready for operation (used), Year of construction: 2017, operating hours: 235 h, General Data Machine weight 21500 kg Injection Unit Screw diameter 70 mm Shot weight 1172 g Injection pressure 1856 bar Clamping Unit Clamping force 350 T This Milacron Elektron Evo 350 was manufactured in 2017. A robust electrical injection moulding machine featuring a screw diameter of 70 mm, closing force of 350 T, and a shot weight of 1172 g. It supports mold sizes between 249 – 800 mm and has minimal usage with only 235 testing hours. Contact us for more information about this machine. Iaodpfsx D Iz Ijx Aaljp Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2022, General Data Machine weight 2000 kg Control Unit Brand FANUC Injection Unit Iaodpfsx D E A Nsx Aalep Screw diameter 22 mm Clamping Unit Clamping force 300 kn Opening stroke 230 mm Distance between bars 310 × 290 mm Size of mold platens 440 x 420 mm This FANUC Roboshot alpha-i30B was manufactured in 2023. It features a clamping force of 300 KN, a screw diameter of 22 mm, and a maximum injection speed of 600 mm/s. Ideal for precision in electrical injection moulding, it offers a compact platen size of 440x420 mm and efficient energy consumption. If you are looking to get high-quality moulding capabilities, consider the FANUC Roboshot alpha-i30B machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: like new (used), Year of construction: 2006, operating hours: 33,107 h, functionality: fully functional, Top machine from cleanroom production (pharmaceutical sector) - Equipped with 820 mm rotary table - Including GEKU Robot SR 500 ST (x=600, y=1400, z=2500 mm) - Only 33,107 operating hours - Safety enclosure / protective cage - Horizontal conveyor belt - Hardly any paint damage / almost as new in appearance - Fully operational The machine can be inspected under power by prior arrangement. Technical Specifications Manufacturer: Engel Model: V 330H/80V/130 Combi 2-Color with rotary table Serial number: 162036 Year of manufacture: 2006 Operating hours: 33,107 h Dimensions L/W/H: see drawing Weight: 10,600 kg Functionality: fully operational Condition: excellent Special features Control system: CC 200 Screw diameter: 25 / 22 mm Shot weight: 72 / 35 g Injection pressure: 2391 / 2066 bar Injection volume: 79 / 38 cm³ Clamping force: 1300 kN / 130 tons Tie bar spacing: tie-bar-less Ejector stroke / force: 61 kN / 100 mm Clamping unit: hydraulic Motor power: to be provided Heating capacity: to be provided Total power: to be provided The machine is immediately available from our warehouse in Hannover, Germany, and has been tested. Iedpfx Aaeub Umqeloap Extras 2-component / 2-color machine Rotary table (820 mm diameter) Geku Robot SR 500 ST Safety enclosure / protective cage CC 200 control, German and English languages GEKU Robot Details SR 500 ST Control: Simotion X axis: 600 mm Y axis: 1400 mm (vertical) Z axis: 2500 mm (horizontal) A flip axis: SWM 45 C axis: Servo Gripper: SWS16 B axis: not available Warranty Warranty up to initial commissioning Loading/Shipping Free loading onto buyer's truck or free delivery against freight reimbursement from our warehouse in Hannover, Germany Financing – on request – leasing option Price on request

Condition: good (used), Year of construction: 2010, clamping force: 900 kN, screw diameter: 30 mm, displacement volume: 106 cm³, injection pressure: 2,042 bar, BATTENFELD HM 90-210 Stock No.: 503670 Manufacturer: BATTENFELD Model: HM 90-210 Control unit: UNILOG B6 Year of manufacture: 2010 Technical Data - Clamping Unit Clamping force: 900 kN Tie bar spacing (HxV): 420 x 370 mm Platen size (HxV): 630 x 613 mm Minimum mould height: 450 mm Maximum mould height: 925 mm Maximum platen distance: 925 mm Opening stroke: 475 mm Ejector stroke: 150 mm Ejector force: 41 kN Moving platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Maximum mould weight: 800 kg Technical Data - Injection Unit Screw diameter: 30 mm Shot volume: 106 cc Injection pressure: 2042 bar Screw L/D ratio: 22 l/d Screw stroke: 150 mm Screw speed: 372 rpm Screw torque: 490 Nm Plasticizing rate: 14 g/s PS Maximum shot weight in air: 103 g/s PS Number of heating zones: 4 Nozzle stroke: 250 mm Dimensions & Weight Machine dimensions (LxWxH): 3.7 m x 1.5 m x 2.1 m Total weight: 4100 kg Equipment / Features Display language: German Hydraulic core pullers: 1x Leveling elements Ethernet interface EUROMAP 13 interface EUROMAP 67 handling interface Interface for dosing unit Interface for handling Interface for temperature control unit Iasdpsyglw Tsfx Aalop

Condition: good (used), Year of construction: 2011, clamping force: 650 kN, screw diameter: 22 mm, displacement volume: 42 cm³, injection pressure: 2,864 bar, BATTENFELD HM 65-130 Stock no.: 503671 Manufacturer: BATTENFELD Model: HM 65-130 Control unit: UNILOG B6 Year of manufacture: 2011 Technical Data – Clamping Unit Clamping force: 650 kN Tie bar spacing (H x V): 370 x 320 mm Platen size (H x V): 550 x 500 mm Min. mold height: 225 mm Max. mold height: 675 mm Ijdpfjyglwmsx Aaljap Max. platen daylight: 675 mm Opening stroke: 450 mm Ejector stroke: 150 mm Ejector force: 26 kN Moving platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Max. mold weight: 600 kg Technical Data – Injection Unit Screw diameter: 22 mm Shot volume: 41.8 ccm Injection pressure: 2,864 bar Screw L/D ratio: 20 l/d Screw stroke: 110 mm Screw speed: 398 rpm Screw torque: 238 N·m Free-flow shot weight (PS): 61 g/s Number of heating zones: 4 Nozzle stroke: 47 mm Dimensions & Weight Machine dimensions (L x W x H): 3.5 m x 1.4 m x 2 m Total weight: 3,000 kg Equipment Control panel language: German Hydraulic core pull: 2x Air valve: 1x Leveling elements Ethernet interface EUROMAP 13 interface Interface for temperature control unit Tool heating circuits: 6x

Condition: good (used), Year of construction: 2013, functionality: fully functional, clamping force: 900 kN, screw diameter: 30 mm, displacement volume: 106 cm³, Injection Moulding Machine BATTENFELD HM 90-210 Stock No.: 503672 Manufacturer: BATTENFELD Model: HM 90-210 Control: UNILOG B6 Year of manufacture: 2013 Technical Data – Clamping Unit Clamping force: 900 kN Tie bar spacing h x v: 420 x 370 mm Platen size h x v: 580 x 630 mm Minimum mould installation height: 450 mm Iasdpfeyglvpjx Aaljp Maximum daylight: 925 mm Opening stroke: 475 mm Ejector stroke: 150 mm Ejector force: 41 kN Moving platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Maximum mould weight: 800 kg Technical Data – Injection Unit Screw diameter: 30 mm Shot volume: 106 cc Injection pressure: 2,042 bar Screw L/D ratio: 22 l/d Screw stroke: 150 mm Screw speed: 372 rpm Screw torque: 490 Nm Theoretical shot weight (PS): 103 g/s Number of heating zones: 4 Nozzle stroke: 250 mm Dimensions & Weight Machine dimensions LxWxH: 3.7m x 1.5m x 2m Total weight: 4,100 kg Equipment Screen text in German CEE socket 16A CEE socket 32A Hydraulic core pull 2x Air valve 1x Levelling elements Ethernet interface EUROMAP 13 interface EUROMAP 67 handling interface Interface for dosing/coloring unit Interface for temperature control unit Tool heating 8x