Used All Electric Injection Molding Machine for sale (111,910)

Condition: used, Year of construction: 1985, operating hours: 96,000 h, functionality: fully functional, machine/vehicle number: 134522, Equipment: CE marking, The machine is surplus and may be sold, operational and disconnected. Ijdpfjxcakfox Aacjtn

Condition: good (used), Year of construction: 2004, functionality: fully functional, Clamping force: 1250 kN Itodewthfuopfx Aacon Screw diameter: 35 mm Tie bar spacing: 470 mm Shot weight: 142 g Minimum mould height: 300 mm Total weight: approx. 6,000 kg

Condition: excellent (used), Year of construction: 2007, operating hours: 26,500 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 45 mm, displacement volume: 305 cm³, injection pressure: 2,050 bar, injection weight: 270 g, mold height (min.): 275 mm, Demag IntElect 150/520-610 General Information Year of manufacture: 2007 Weight: 6,900 kg Dimensions (L × W × H): 5.5 × 1.5 × 2.1 (2.3) m Control system: NC4 Operating hours: 26,500 Bh Clamping Unit Clamping system: 150/... Clamping force: 150 t Platen dimensions (H × V): 770 × 770 mm Tie bar distance (H × V): 520 × 520 mm Mould height (min.–max.): 275 mm (max. increased) Max. distance between platens: 1,180 mm Ejector stroke: 125 mm Ejector force: 35 kN Itedpfx Aoxn N H Tjacon Injection Unit Injection unit type: …/610 Screw diameter: 45 mm Screw L/D ratio: 20 Shot volume: 305 cm³ Shot weight: 270 g Specific injection pressure: 2,050 bar Wear-resistant screw; bimetallic barrel, standard L:D Check valve (RSP), 3-piece, ring type Increased injection speed: 300 mm/s Additional Equipment Increased mould installation height (min. unchanged, max. increased) Electrical/hydraulic interface for connecting 2 hydraulic cores on the moving mould platen via a separate hydraulic unit Offer valid for the injection moulding machine only

Condition: good (used), Year of construction: 2006, functionality: fully functional, clamping force: 2,000 kN, Demag Ergotech Extra 200-600 Plastic Injection Moulding Machine Type: Extra 200-600 Year: 2006 Screw diameter: 45 mm Injection pressure: 1910 bar Shot weight (PS): 291 g Nozzle contact force: 60 kN Clamping force: 2,000 kN Holding force: 2,200 kN Max. opening stroke: 575 mm Mould mounting platens: 860 x 860 mm Itjdpfow H Sw Hsx Aacsn Max. mould weight: 2,500 kg Ejector stroke: 180 mm Ejector force: 69 kN Ejector retraction force: 31 kN The machine is in very well-maintained original condition. Complete and detailed documentation is available. Inspection under power can be arranged at short notice. For further questions, please do not hesitate to contact us. Price: ex stock here plus VAT Condition: good – ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Subject to prior sale and errors. We look forward to receiving your order. Additional machines and equipment available from stock – please enquire. We look forward to your inquiry.

Condition: excellent (used), Year of construction: 2011, operating hours: 38,000 h, functionality: fully functional, clamping force: 4,000 kN, screw diameter: 70 mm, For sale is an injection moulding machine from Engel, model VC 2550 H 80V 400 Combi. The machine has been regularly serviced (service reports available) and is in excellent condition. The offer includes: - Yaskawa Motoman YR-MH00050-B00 robot, year of manufacture 2011 - KraussMaffei conveyor belt (2.5 x 0.8 m), year 2012 - Safety fence (3.5 x 2.7 x 2.1 m), year 2012 Technical data: Year of manufacture: 2011 Operating hours: 38,063 Control system: CC200 Clamping force: 4,000 kN Cylinder diameter: Ø70 mm horizontal and Ø22 mm vertical + Spare cylinder Ø22 mm without heating bands 2x hydraulic core pull Ijdsxb D Dtspfx Aacjtn Needle shut-off: 2x pneumatic / 2x hydraulic each Mold heating circuits: 12x Temperature sensors: 4x Mold cavity pressure: 2x Machine weight: approx. 21,000 kg Transport and loading can be organised Europe-wide, upon request and for an additional charge. Prices are exclusive of VAT. Inspection possible by appointment. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options, please visit our website.

Condition: excellent (used), Year of construction: 2015, operating hours: 35,900 h, functionality: fully functional, clamping force: 350 kN, screw diameter: 24 mm, clearance between the columns: 280 mm, Type BOY 35E ALPHA 2 Year of manufacture 2015 Operating hours 35,900 hours Screw diameter 24 mm HRW Max. injection pressure 2,231 bar Max. shot volume 41 cm³ Clamping force 35 t Isdpfx Aaexphrdscstn Max. tie bar distance 280 x 254 mm Minimum mould height 200 mm Max. distance between platens 500 mm Dimensions 2,300 x 800 x 1,700 mm (L x W x H) Weight 1,300 kg Equipment • Procan ALPHA 2 • Pneumatic air valve • Euromap 67 • Individual air program • Econ plasticizing unit

Condition: excellent (used), Year of construction: 2010, operating hours: 20,656 h, functionality: fully functional, machine/vehicle number: 174620, clamping force: 260 kN, The machine comes from toolmaking and was only used for sampling. This is why it has low operating hours and is in very good condition. Please check the documents; the order confirmation is included there. Iedpfxexfgfzj Aacotn

Condition: good (used), Year of construction: 2000, 1x used Arburg 570C 2000-350 Year of manufacture: 2000 Screw: 45mm Core pulls: 1x Itedpfexc Eqqjx Aacen Hot runner: 6x incl. conveyor belt

Condition: good (used), Year of construction: 2005, clamping force: 9,500 kN, screw diameter: 105 mm, displacement volume: 4,546 cm³, injection pressure: 1,778 bar, injection weight: 4,137 g, General Information Year of manufacture: 2005 Control system: MC4 Weight: 56,000 kg Dimensions (L × W × H): 11.3 × 3.4 × 2.6 m Clamping Unit Mold closing system: 950 / ... Clamping force: 949 t Platen dimensions: 1960 × 1710 mm Tie bar spacing: 1400 × 1150 mm Mold height: 500 – 1200 mm Opening stroke: 1900 mm Itsdpexn N Dxsfx Aacon Maximum distance between platens: 2400 mm Ejector stroke: 300 mm Injection Unit Injection unit type: ... / 8100 Screw diameter: 105 mm Injection volume: 4546 ccm Shot weight: 4137 g Specific injection pressure: 1778 bar

Condition: excellent (used), Year of construction: 2006, operating hours: 32,000 h, functionality: fully functional, total height: 2,300 mm, total width: 1,291 mm, total length: 4,083 mm, screw diameter: 2,522 mm, clamping force: 1,300 kN, injection pressure: 2,400 bar, overall weight: 10,600 kg, We once again have some excellent cleanroom machines in our range. Here, we are offering this Engel 2-component cleanroom machine from 2006. The machine comes complete with a GEKU SR 500 ST. Additional accessories include a safety cage and a turntable, all part of the package. The machine has run just 33,107 cycles in automatic mode. The machine comes from a reputable pharmaceutical manufacturer, so both the machine and its handling system were maintained under a very strict maintenance regime and are in first-class condition for their age. Even the paintwork shows hardly any signs of wear. I am happy to provide you with further data and a quotation upon request. Best regards, Ijdpjxd H A Rjfx Aacjtn Nick Schönfeld Machinery Trading

Year of construction: 2008, condition: good (used), For sale is a Krauss Maffei brand injection molding machine type KM 110-380 The machine is in a good to very good condition, all maintenance and inspections have been performed Technical data: Year of manufacture 2008 Extended tie bars Pneumatic valve gate 2X Hydraulic core puller 31000 operating hours Cylinder D35mm Mould closing force: kN 1100 Mold opening force: kN 70 Euromap63 interface for version > 1-04-09 Nitrogen battery present Included component Wedge shoes with bolts and nuts Double bit wrench Declaration of conformity cpl switchboard Certificate USB memory stick Ejector coupling-mechanical Enclosed in the control cabinet All prices plus VAT Iedpfsibyatox Aacstn Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, KM 500-3500 C2 Year of manufacture: 2007 Operating hours in automatic mode: 60,000 h Iodpfxow Rflre Aacotn Clamping unit Clamping force: 5,000 kN Mounting plate dimensions: 1270 x 1310 mm Distance between tie bars: 900 x 800 mm Min./max. mold height: min. 480 mm Maximum opening stroke: 1,650 mm Injection unit Screw diameter: 80 mm Injection volume: 1,543 cm³ Shot weight: 1,404 g Injection pressure: 2,205 bar Electrical and hydraulic equipment Nominal pump motor power: 90 kW Heating capacity: 44 kW Dimensions and weight Net weight with control cabinet: 27,090 kg Dimensions (L x W x H): 7.65 m x 2.55 m x 2.55 m

Condition: like new (used), Year of construction: 2019, operating hours: 6,357 h, clamping force: 450 kN, The machine comes from toolmaking and was used exclusively for sample production. Its condition is as new! For further details, please refer to the order confirmation in the attached documents. Itodjxfgc Tspfx Aacen

Condition: like new (used), Year of construction: 2012, operating hours: 40,600 h, 1,0 St. gebr. Spritzgießmaschine mit Palettenwechseler Hersteller: KRAUSS MAFFEI Typ: KM80-380 AX Baujahr: 2012 Schließkraft: 80 Tonnen Holmabstand 480 x 410 mm Einbauhöhe min.: 180 mm Öffnungsweg: 550 mm Schnecken DN: 35 mm Max. Hubvolumen: 154 cm³ Iedpexac Ibsfx Aacetn Spritzteilgewicht: 140 g/PS Steuerung: MC5 Ausstattung: Palettenwechseler Schnittstelle Temperiergerät Verschleißarme Plastifizierung Ca. 40.600 Betriebsstunden

Condition: excellent (used), Year of construction: 2009, clamping force: 1,800 kN, BATTENFELD HM 180 /525H/60V Clamping force: 180 t Year of manufacture: 2009 Shot weight: 175/20.8 g Injection unit .../525/....60 Screw diameter: 35/18 mm Specific injection pressure: 2743/2593 bar Injection volume: 193/22.9 ccm Shot weight: 175/20.8 g Screw L/D ratio: 22/20 Iedpfxoxm Su Dj Aacstn Clamping unit 180/... Clamping force: 180 t Tie bar spacing: 570 x 520 mm Mould height: 305 mm Ejector stroke: 200 mm Equipment: Servo-driven rotary table 3 x hydraulic core pulls

Condition: excellent (used), Year of construction: 1993, Clamping force: 1,300 tons Screw diameter: 160 mm Clamping platens: 2,250 x 1,950 mm Itedpfewmlffox Aacjn Minimum installation height: 700 mm Maximum installation height: 1,400 mm Ejector stroke: 350 mm Opening stroke: 1,650 mm Weight: 130 tons CC90 control system Operating hours: 14,700

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Technical Data Year of manufacture: 2007 Clamping Side Clamping force: 13,000 kN Max. opening stroke/installation height: 2,300 mm Max. distance between mounting plates: 4,000 mm Min./max. mold installation height: 1,000 - 1,700 mm Max. platen height: 1,910 mm Min. mold size: 1,020 x 820 mm Clear tie bar spacing: 1,500 mm Ijdpfxew Rfkho Aacjtn Nozzle radius: R40 mm Mold weight: 29,000 kg Ejector stroke: 350 mm 1st Injection Side Screw diameter: 120 mm Shot volume: 6,786 ccm 2nd Injection Side Screw diameter: 105 mm Shot volume: 5,195 ccm NC5 Control Core pulls AWS/DS: 1/1

Condition: like new (used), Year of construction: 2019, operating hours: 11,337 h, functionality: fully functional, machine/vehicle number: 234917, clamping force: 1,600 kN, screw diameter: 30 mm, Equipment: documentation/manual, Injection moulding machine with extensive additional equipment – from cleanroom production For sale is a very well-maintained injection moulding machine with numerous additional features. The machine comes from a cleanroom production environment and was exclusively operated with PP material – accordingly, the screw is in an almost as-new condition. Highlights: - Extensive special equipment - Used exclusively with PP - Very clean condition – excellently maintained I purchase all machines and peripheral devices directly from customers at a fair price. The subsequent resale price is calculated appropriately so that all three parties – seller, buyer, and myself as intermediary – make a small, fair deal. Unreliable offers from various used machinery dealers are therefore not welcome. Itjdpfowb Dl Tox Aacon

Condition: excellent (used), Year of construction: 2001, operating hours: 23,400 h, 1,0 St. gebr. Spritzgießmaschine Hersteller: ARBURG Typ: 420C1000-250 Baujahr: 2001 Schließkraft: 100 Tonnen Holmabstand 420 x 420 mm Schnecken DN: 40 mm Dosiervolumen: 188 ccm³ Spritzteilgewicht 172 g/PS Steuerung: SELGOCIA Isdjw U Ebbspfx Aacstn Ausstattung: -Angußpicker, Hersteller: GEIGER

Condition: excellent (used), Year of construction: 2007, clamping force: 5,000 kN, screw diameter: 85 mm, displacement volume: 2,128 cm³, injection pressure: 1,574 bar, injection weight: 1,037 g, Battenfeld HM 500/3400 Iedpfx Ajxm St Tjacjtn Clamping force: 500t Year of manufacture: 2007 Injection weight: 1937g Injection unit .../3400 Screw diameter: 85 mm Specific injection pressure: 1574 bar Injection volume: 2128 ccm Injection weight: 1937 g Screw L/D ratio: 22 Clamping unit 500/... Clamping force: 500 t Platen dimensions: 1590 x 1470 mm Tie bar spacing: 1000 x 800 mm Mould height: 450 mm Opening stroke: 1150 mm Maximum platen distance: 1600 mm Ejector stroke: 250 mm Weight: 25000 kg Control: Unilog B6 Equipment: - 1 x pneumatic valve - 2 x hydraulic cores - EUROMAP 67 interface - Parallel movements - Bimetallic injection unit

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Technical Data Year of manufacture: 2006 Clamping Unit Clamping force: 8000 kN Itedpfx Ajw Rfh Tsacjn Max. platen size: 1520 mm Clear tie-bar distance: 1170 mm Min. mold height: 700 mm Max. mold height: 1300 mm Max. platen opening: 2300 mm Max. opening stroke/mold height: 1000 mm Ejector stroke: 300 mm 1st Injection Unit Screw diameter: 105 mm Shot volume: 4160 ccm 2nd Injection Unit Screw diameter: 90 mm Shot volume: 3050 ccm

Condition: like new (used), Year of construction: 2022, operating hours: 11,500 h, functionality: fully functional, 1,0 St. gebr. Spritzgießmaschine mit Roboter Hersteller: ZHAFIR Isdew U Dtiepfx Aacotn Typ: ZE2300III Baujahr: 2022 Schließkraft: 230 Tonnen Holmabstand 570 x 570 mm Einbauhöhe min. /max.: 220 mm / 600 mm Öffnungsweg: 1.150 mm Schnecken DN 1: 55 mm Max. Hubvolumen: 570 cm³ Spritzteilgewicht in PS: 518 g Ausstattung: -Roboter -Kasakensteuerung -1 x Kernzug -Förderband -Schutzzaun Die Maschine wird ohne sonstige abgebildete Peripherie verkauft.

Condition: good (used), Year of construction: 2002, clamping force: 6,500 kN, screw diameter: 100 mm, displacement volume: 3,338 cm³, injection pressure: 1,612 bar, injection weight: 3,038 g, Battenfeld HM 6500/5400 General parameters Year of manufacture: 2002 Control system: Unilog B4 Weight: 30,000 / 10,000 kg Injection unit: .../5400 Screw diameter: 100 mm Specific injection pressure: 1612 bar Injection volume: 3338 ccm Shot weight: 3038 g Ijdpsxm Sr Aefx Aacetn Clamping system: 6500/... Clamping force: 650 t Mould platen dimensions: 1400 x 1400 mm Space between tie bars: 1000 x 1000 mm Mould height: 500...1200 mm Opening stroke: 1700 mm Maximum platen distance: 2200 mm Ejector stroke: 300 mm Additional equipment 2 × hydraulic cores Injection cooler with increased cooling capacity 2 × pneumatic valves Increased ejector stroke

Condition: excellent (used), Year of construction: 2005, KM 500/2700C2 Technical Specifications Clamping Side: Clamping Force: 5000 kN Tie Bar Dimensions (H x V): 900 x 800 mm Minimum Installation Height: 480 mm Maximum Platen Distance: 1650 mm Centering: 200 mm Mold Weight: 7900 kg Injection Side: Itodpfx Asv Uzq Ujacsn Screw Diameter: 80 mm Displacement: 1433 cc Injection Pressure: 1829 bar Equipment: MC 4 Control System Core Pulls: 2+2 Machine is sold without robots and peripherals!

Condition: excellent (used), Year of construction: 2007, Manufacturer: Krauss Maffei Type: KM 650-3500-700 CZ Year of manufacture: 2007 Control system: MC 4 Clamping Unit: Clamping force: 650 t Opening stroke: 1,150 mm Minimum mold installation height: 600 mm Itodpfx Ajw Rd U Eeacon Maximum platen daylight: 1,750 mm Tie bar spacing (h x v): 1,100 x 900 mm Platen dimensions (h x v): 1,510 x 1,370 mm Centering (nozzle-ejector plate): 200 / 200 mm 1st Injection Unit: Screw diameter: 80 mm Maximum shot weight in PS: 1,400 g Shot volume: 1,543 cm³ Injection pressure: 2,205 bar 2nd Injection Unit: Screw diameter: 45 mm Shot weight in polystyrene: 278 g Shot volume: 305 cm³ Injection pressure: 2,336 bar Accessories: 2 x air valves 16-fold cascade 3 x core pullers on moving platen 3 x core pullers on fixed platen 20 x hot runner controllers Robot interface: Euromap 67 Dimensions: Total weight: 34,500 kg Overall size (L x W x H): 7.8 x 2.5 x 2.5 m Operating hours: 45,400 h Machine can also be operated as a single-component machine (1K).