Used Electric Tapping Machine for sale (100,822)

Condition: new, functionality: fully functional, Year of construction: 2025, throat depth: 400 mm, warranty duration: 24 months, Model: GB-4016E Rjdjwzqx Hjpfx Aa Eel Bending pressure (KN): 400 Bending length (mm): 1600 Distance between columns (mm): 1320 Maximum opening height (mm): 430 Slider stroke (mm): 180 Throat depth (mm): 400 X-axis stroke (mm): 400 X-axis speed (mm/s): 400 R-axis stroke (mm): 140 R-axis speed (mm/s): 200 Z-axis stroke (mm): 1040 Z-axis speed (mm/s): 400 Machine power (kw): 17.2 Dimensions (mm): 2090*1265*2290 Weight (kg): 3500

Condition: good (used), TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Lincoln Electric, TIG welding machine, inverter welding machine type Invertec V270-SX Rjdjx Hwahspfx Aa Eel -Welding power: max. 270 A -ground cable -Dimensions: 600/300/H390 mm -Weight: 31 kg

Condition: used, Year of construction: 2017, machine/vehicle number: 244489, Machine as new. Very little used, only for sample production. Rsdpfxjx H Npuj Aa Esl Machine is fully equipped:

Condition: used, Year of construction: 2019, Wire EDM Machine Manufacturer: Mitsubishi Electric Model: MV1200S NewGen Year of manufacture: 2019 Operating hours: approx. 9,500 Control: M800 D-CUBES Mitsubishi Electric control system Hybrid construction Rjdpjxpfy Ssfx Aa Ejl Travel paths X/Y/Z: 400 x 300 x 220 mm Travel paths U/V: 120 x 120 mm Max. workpiece dimensions: 810 x 700 x 215 mm Max. workpiece weight: 500 kg ODS – Optical Drive System Tubular direct drives in the X/Y axes Linear scales in X/Y axes Intelligent AT – Automatic wire threading For wire diameters 0.10 – 0.3 mm Automatic small-hole detection function 5 controlled axes – Prepared for additional axes PFC – Precise Finish Circuit LLS – Long Life System 10 kg wire station Wire alignment block Wire chopper Compressor cooler tä161225

Condition: excellent (used), Year of construction: 2017, operating hours: 7,166 h, functionality: fully functional, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, total height: 2,815 mm, total length: 3,475 mm, total width: 3,130 mm, This machine is very well maintained and in excellent condition. You can inspect and test this machine under power. Price is ex works, without dismantling. Manufacturer: Mitsubishi Electronic Year of manufacture: 2017 MODEL: MV4800 Rodovdu Hzjpfx Aa Ejl Operating hours: approx. 7,166 hrs Application type: Wire EDM Machine type: Wire-cut EDM machine Technical Data – Mitsubishi MV4800 General Information Width: 3,130 mm Depth: 3,475 mm Height: 2,815 mm Weight: 5,700 kg Movements X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 510 mm U/V travel: 200 (+/-100) mm Workpiece Diameter over bed: 1,250 mm Diameter over saddle: 1,020 mm Workpiece diameter: 505 mm Maximum table load: 3,000 kg Worktable External length: 1,080 mm External width: 780 mm Price significantly reduced. This machine is being sold due to business relocation.

Year of construction: 2013, condition: ready for operation (used), General Data Machine weight 3500 kg Control Unit Brand MITSUBISHI Main Drive Number of axis 3 Movement X-Axis Movement 600 mm Y-Axis Movement 400 nmm Z-Axis Movement 310 mm Workpiece Workpiece X 820 mm Workpiece Y 305 mm Workpiece Z 1050 mm Rsdpfxex D Iv Se Aa Eol Workpiece weight 1500 kg Additional Equipment Wire diameter: 0.1 – 0.3 mm This 3-axis Mitsubishi Electric MV2400R wire EDM machine was manufactured in 2013. It features a PC-based control unit with a 15" LCD touchscreen, supporting 2D/3D CAM and graphics verification. Capable of handling workpieces up to 1050 x 820 x 305 mm and 1500 kg, it offers a machining travel of 600 x 400 x 310 mm. If you are looking to get high-quality EDM capabilities, consider the Mitsubishi Electric MV2400R machine we have for sale. Contact us for more information. Application Types EDM

Condition: new, functionality: fully functional, Year of construction: 2025, bending force (max.): 1,000 t, stroke length: 200 mm, operating speed: 50 mm/s, reverse speed: 180 mm/s, overall weight: 8,000 kg, total length: 3,915 mm, total width: 1,605 mm, total height: 2,655 mm, input voltage: 380 V, input frequency: 50 Hz, warranty duration: 24 months, bending angle (max.): 90 °, table length: 3,200 mm, working height: 450 mm, All-Electric Servo Bending Machine Rodpfjv Hchlox Aa Eel Nominal force(KN): 1000 Slider stroke(mm): 200 Throat depth (mm): 360 X-axistravel(mm): 600 R-axistravel(mm): 200 Z-axistravel(mm): 2500 🔹 Smart CNC System – SL100-P with high-end algorithms and 12-inch touchscreen for intuitive operation. 🔹 High-Precision Structure – Finite element analysis (FEA), annealed, and one-time machining for long-term stability and accuracy. 🔹 4-Axis Intelligent Backgauge – AC servo-driven, high-speed positioning with automatic collision avoidance. 🔹 Precision Compensation System – Adjustable convex strips & fine-tuning mechanism for optimal bending accuracy. 🔹 Powerful & Durable Drive – High-torque servo motor, heavy-duty ball screws & sealed protection for longevity. 🔹 Fully Closed-Loop Control – Y1/Y2 magnetic scale feedback, positioning accuracy ±5μm. 🔹 Optimized Electrical System – Closed electrical box, heat dissipation, & neat wiring for reliability and easy maintenance. 🔹 Imported Precision Components – Ball screws & linear guides ensure accuracy without stroke compensation. 🔹 High precision, stability, and smart automation – designed for professional sheet metal bending!

Condition: good (used), TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine Rjdox Hv Nzopfx Aa Eol -Manufacturer: Lincoln Electric, TIG welding machine, inverter welding machine type Invertec V270-S -Welding power: max. 270 A -ground cable -Dimensions: 485/280/H390 mm -Weight: 20.1 kg

Condition: ready for operation (used), Servo-driven tapping and threading machine, Used machine Manufacturer: Electric Servo Redpfx Aoxdfauja Eel Model: M12H Dimensions: Width: 700 mm Depth: 150 mm Height: 520 mm Radius: 1100 mm Comes with Tap Torsion GT 12-0316 chuck set: 3.5 × 2.7 M3 4.5 × 3.4 M4 8 × 6.2 M8 M6-8 Torsion u-6.3 M5 Torsion u-5 M10 Torsion u-8 M12 Torsion u-9

Condition: good (used), TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Lincoln Electric, TIG welding machine, inverter welding machine type Invertec V260-S Rjdpfx Ajx Hvyysa Esl -Welding power: max. 260 A -Dimensions: 475/200/H345 mm -Weight: 16.5 kg

Condition: good (used), Tapping machine, bench drilling machine -Spindle mount: B12 -Tap chuck: Tapmatic 30 X M1.5-M7 -Projection: 165 mm Rodeb A Imxopfx Aa Ejl -Motor power: 0.25 kW -Weight: 60 kg

Condition: new, - Drum length 5500 mm, diameter 2000 mm (equal to Doppstadt SM 620) - Motor 15 kW Rodpfx Aaox E T Hhs Ejl - with electrical cabinet - with cleaning brushes - screen mesh size according to customer´s choice, thickness of steel 8 mm - new machine manufactured in Europe - with manuals and CE - 1 year warranty READY FOR SALE

Condition: like new (used), Year of construction: 2022, Electric plate rolling machine Year of manufacture: 2022 Frequency inverter-controlled drive Capacity: 1050 x 1.0 mm Rodpfsxx Av Asx Aa Esl

Condition: used, TIG + Shielded Metal Arc Welding Machine MESSER GRIESHEIM Type Uniwig GW 280 AC/DC Serial No. 4930185 Year of manufacture: 1985 Performance for TIG welding: 280 amps at 80% duty cycle (AC) 250 amps at 100% duty cycle (AC) 230 amps at 100% duty cycle (DC) Performance for stick electrode welding: 250 amps at 100% duty cycle (AC) 200 amps at 80% duty cycle (DC) Rodsxf Uw Sopfx Aa Eel Adjustment range: 3 coarse steps and infinitely variable Power supply: 400 volts, 50 Hz - 4-meter hose package with TIG torch - 2-stroke and 4-stroke welding function - Weld time setting for spot welding - Water-cooled - Gas pressure regulator Required space (L x W x H): 1050 x 590 x 1000 mm Weight approx. 300 kg Good condition

Condition: excellent (used), Tapping attachment Efem size 4 (28550) Mounting MK 3 Taps from M 10 - M 24 Rjdpfx Ajuf N S Asa Esl automatic changeover right - left Total length 295 mm Diameter 105 mm

Condition: excellent (used), Unused Ingersoll Rand QM Series Nut Runner - interconnecting cable and controller Rodpfxswric Es Aa Eol

Condition: used, Table threading machine M1 - M10 Rodeda I E Djpfx Aa Eel Height adjustment via toothed rack and hand crank, motor 0,22+032 kW motor rpm 1420/ 2770 spindle Upm 480 - 580 Weight 100 kg Tapping chuck with key Under table Connection cable with 16 A CEE plug

Condition: new, - Drum length 5500 mm, diameter 2000 mm (equal to Doppstadt SM 620) - Motor 15 kW - with electrical cabinet - with cleaning brushes - screen mesh size according to customer´s choice, thickness of steel 8 mm - new machine manufactured in Europe - with manuals and CE - 1 year warranty READY FOR SALE Rsdjx E Tyhjpfx Aa Eol

Condition: new, thread dia. M3 - M16 metrisch 312 U/min. working area max. 1100 mm engine output 0,6 kW weight 30 kg dimensions 700 x 600 x 200 mm Electric tapping machines for M3 - M16 threads, Includes connection for cutting oil supply! Adjustable angle. Rsdot Eahpopfx Aa Esl Quick-change chuck with slip clutch. Display adjustable: Variable speed, adjustable depth, material selection, selection of main rotation direction, thread selection. Documentation in English! Optional: Tiller table type: FL-WB

Condition: used, Internal threading machine Hagen & Goebel type HG 124 Machine no. No. 4112 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M15 Cutting capacity in brass M3 to M17.5 throat depth 250 mm Pinol stroke 80 mm Table size 345 x 245 mm Spindle speed 200 - 1000 rpm Motor power 0.55 / 1.0 kW Mains connection 380 Volt, 50 Hz - 6 speed levels via belt change (3 levels via belt + 2 motor speeds) - Thread pitch via guide cartridge - 2 guide cartridges with 0.8 mm and 28 G per inch thread pitch - Table height adjustment with toothed rack via hand crank on the round column - Spindle holder with cone Ø 14.8 to 16 mm - Gear rim drill chuck Ø 1 to 13 mm Rodpfxehgnd Ao Aa Ejl Space requirement L x W x H 900 x 500 x 1800 mm Weight 260 kg Good condition

Condition: new, functionality: fully functional, Electric Potters Disc Machine New. Rjdjv U Emgopfx Aa Esl 230 V With chair and shapers. Good working condition. Please check out our other listings as well.

Condition: reconditioned (used), Year of construction: 2008, operating hours: 150 h, functionality: fully functional, compressed air connection: 6 bar, input voltage: 230 V, total width: 1,750 mm, total length: 1,350 mm, total height: 2,050 mm, type of input current: AC, overall weight: 550 kg, plate length: 350 mm, plate width: 180 mm, year of last overhaul: 2024, Equipment: documentation/manual, safety light barrier, Polish distributor TOSH offers for sale a used industrial pad printing machine TOSH Logica 05 after complete servicing. The device stands out for delivering top precision and reliability on the market. The machine is designed for printing on plastics, metals, glass, or ceramics. TOSH srl machines utilize electric drive, ensuring full control over the pad printing process, high print quality, and perfect repeatability. The modular design allows configuration to be adapted to production requirements and enables multi-color printing. The LOGICA series is intended for industrial applications and is valued for its durability – machine lifespans are measured in decades and their reliability allows continuous operation in production environments. TOSH represents one of the most advanced and efficient pad printing solutions in the world. Device specification Model: TOSH Logica 05 + INDEXER PRN 460 Type: automatic multi-color pad printing machine with programmable indexer Condition: used, after comprehensive service by an authorized TOSH representative Year of manufacture: 2009 Color configuration: 2 colors, ink cups Ø160 mm (new ceramic rings) Expandable up to 5 colors: • 3 colors Ø130 mm • 4 colors Ø90 mm • 5 colors Ø70 mm Printing area: circle Ø145 mm or square 105×105 mm (in current configuration) Equipment and functions Programmable part positioning: INDEXER PRN 460 Rodpfju Thi Aex Aa Eel TO100 cross table Quick-change ink cup system Tool-less guide towers Independent X-Y-R axis adjustment for cliche and pad position Full control of 7 operating speeds (ink cup movements, pad up/down, indexer speed) Transfer timing adjustable to 0.01 s Pneumatic modules: part rotation, clamping, vacuum Fixture for cylindrical surfaces with 180° rotation Key advantages of TOSH machines Very easy operation and rapid setup via step-by-step (JOG) mode Low operating costs – all axes driven by stepper motors 230 V power supply – fully electric drive, advantage over pneumatic systems High print precision – up to 0.01 mm Capability to integrate with production lines and robots Full technical documentation: CE, wiring diagrams, DTR, manual (PL/EN) Additional options Testing of the device before purchase Customization of the machine for specific projects: preparation of fixtures, selection of inks, pads, cliches, etc.

Condition: good (used), - Pneumatic motor GAMOR - Reinforced am structure made of hard aluminum (parallelogram) - Table fixing column - Capacity: M2-M8 Rjdpfx Aoxr A Apoa Eol - Speed: 700 RPM - Working radius max: 1900mm - min: 200mm - Working air pressure: max: 7 bar - 840 lt/min - Weight: 18 kg Sold without the welding table (as seen in the pictures), only the machine, which can be mounted on a table or similar.

Condition: new, thread dia. M3 - M16 metrisch 250 U/min. 0 6 - 8 bar working area max. 1100 mm Redjhiptgopfx Aa Eel weight 15 kg dimensions 700 x 280 x 250 mm Pneumatic tapping machine Type with an adjustable angle, horizontal tapping possible Pneumatic tapping machines for M3 - M16 threads, angle adjustable. 8 pcs. quick-change chuck with slipping clutch. Documentation in English! Optional: clamping table with grooves type: FL-WB

Condition: used, Bench drilling and tapping machine FLOTT type TBZ 15 GL Serial no. 32177027 Year of manufacture 1986 Drilling capacity 15 mm Spindle holder MK2 throat 195 mm Pinol stroke 80 mm Table size 275 x 200 mm Column diameter 70 mm Spindle speed 80 - 4500 rpm 18 steps Motor power 0.55 + 0.75 kW Mains connection 380 Volt, 50 Hz - 6 belt speeds from the motor and 2 belt speeds to the drill spindle 2 motor speeds Rodpfedzp S Nsx Aa Eol - 3 guide cartridges 0.7mm + 0.8mm and 28G available - Drill head height adjustment via crank with rack and pinion on the column - Original metal base Space requirement L x W x H 700 x 350 x 1850 mm Weight approx. 150 kg good condition