Used Akerman Ew 200 for sale (18,112)

Condition: used, Year of construction: 2014, Suitable for automatic grinding of the tooth face and tooth back of carbide-tipped circular saw blades. Technical Data: Circular saw blade diameter 80 - 650 mm, circular saw blade bore diameter from 10 mm, blade thickness up to 5 mm, tooth pitch 6 - 100 mm, rake angle -10° to +30°, clearance angle 5° to 25°, tooth height difference arbitrary, bevel grinding on the tooth back up to 45°, bevel grinding on the tooth face up to 15°, grinding wheel diameter 125 mm, grinding wheel bore diameter 32 mm, connected load 400 V / 50 Hz, weight approx. 850 kg, dimensions W x D x H = 1502 x 960 x 1900 mm, colour grey RAL 7045 / grey RAL 7047. Cjdpfxjz Nw H Ae Ap Dshd Suitable for automatic grinding of the tooth face and tooth back of carbide-tipped circular saw blades.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS21, Exhibition unit ATLANTA NEOS stretch wrapper with articulated arm 99 individually storable programs Start/stop at the same position (corner counter) Wrapping height 2000 mm Mast height approx. 1500 mm (fits through almost any door and in almost any van) Powerstretch PRS 200% film (more available as an option) Codpfxoz Iq Tro Ap Dohd Motorized pre-stretch system with stepless adjustment Electronically controlled film tension via control unit IEF quick-loading system for easy film roll changes Film specifications: Max. outer diameter Ø300 mm – height = 500 mm – core Ø76 mm Automatic film cutting unit (available as an option) Film tension storable in 4 steps TECHNICAL DETAILS: Two maintenance-free 12 V – 100 Ah AGM batteries connected in series Minimum 160 pallets per Charging – Charging time: 8-10 hours High-frequency battery charger with LED display Wrapping height “Machine with MAST (pallet included) 2,150 mm Height measurement via light sensor or dimension input on the display Protective bar for emergency stop of the drive Emergency stop switch compliant with CE regulations Acoustic warning signal and warning light at machine start Fall protection for the film carriage Push buttons for start & stop Machine function compliant with CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters adjustable via display - Display lock for program changes - Adjustable machine speed around the pallet up to 80 m/min Upward and downward carriage speeds independently adjustable - Upward carriage speed from 1.3 to 5.4 m/min - Downward carriage speed from 1.3 to 5.4 m/min - Number of wraps at the pallet base (1-10 wraps) - Number of wraps at the pallet head (1-10 wraps) - Pallet wrapping height adjustment - Film application tension for foot and head wrapping / ascending and descending, independently adjustable - Film pre-stretch for foot and head wrapping / ascending and descending, independently adjustable - Ergonomic height for film changes ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable wrapping programs for the NEOS arm - Cross wrapping (upward/downward) - Simple wrapping (upward only or downward only) - Wrapping cycle with preset start and stop height - Wrapping to a preset height (with the height sensor deactivated) - Wrapping cycle for large pallets - Wrapping cycle for top sheet film - Soft start cycle for applying edge protection - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp edges Pallet edge wrapping Wrapping cycle with manual or motorized cord formation (optional) Further systems available immediately from our Ludwigsburg warehouse Also available with the ARYA system – automatic film application possible

Condition: used, fuel type: diesel, Year of manufacture: 2012 Lifting capacity: 230 kg Codpfxezqkato Ap Dohd Please contact Gebrauchtgeräte Center for more information

Condition: used, Technical details: weight: 400 kg Chsdpfxozxxfte Ap Ded number of strokes: - Hub / Min Torque: - kp dimensions L x W x H: 1,24 x 0,84 x 1,0 m For sale is an extensive package of high-quality tool holders, clamping devices, fixtures and accessories from the inventory of a Gleason-Pfauter P200 gear hobbing machine. The package comprises a large number of precision-manufactured components in various designs and dimensions, including: ·Various workpiece fixtures and clamping devices ·Precision clamping and locating mandrels ·Various clamping sleeves and clamping bodies ·Mounting and adapter rings in various diameters ·Tool holders and tooling fixtures ·Form/clamping jaws and associated interchangeable elements ·Various precision fixtures manufactured by the German manufacturer BUNA ·Various special-purpose fixtures and adapters ·Extensive additional accessories as shown in the pictures Among the items included is a marked BUNA precision fixture No. 2457368.0, Ø32, A5, Made in Germany. *

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,425 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 201 mm, total length: 220 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, table width: 450 mm, table length: 680 mm, empty load weight: 2,450 kg, Machine completely cleaned and overhauled. 0.1 mm option available. Chedpfx Apjy Tvtms Ded Available for viewing at our facilities in Semsales, Switzerland.

Condition: used, Year of construction: 2011, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: 9615, total length: 31,200 mm, total height: 2,300 mm, total width: 4,600 mm, overall weight: 9,000 kg, Equipment: rotational speed infinitely variable, safety light barrier, SC3-200-5 fully automatic cutting system Angle and inclination drive for the sawing station Automatic infeed system Feed cross conveyor (6 strands, wood length up to 14 m) Component support for small cross-sections Control unit for waste disposal Conveyor belt for waste disposal (integrated) 6-arm stacking table (wood length up to 10 m) Combination support for vertically operating tools 2x Vertical drilling unit 2.2 kW Codpfx Ajzyihujp Djhd 2x Vertical chain mortiser 5.5 kW Additional combination support, vertical, for rotary milling cutter Rotary milling head 7.5 kW Combination support for horizontally operating tools 2x Horizontal drilling unit 2.2 kW Marking device, rear Marking device, bottom Marking device, front Angled conveyor, right

Condition: like new (used), Year of construction: 2017, functionality: fully functional, 2 recirculating air chamber furnaces, fast heating times, short process times, electric, warranty 12 months, immediately available - Temperature 200°C, can be increased to 250°C! - Charging trolley, 5 units available, conversion on request - Homogeneous temperature distribution of +/- 10°C - Internal dimensions W x D x H: 3750 x 1400 x 2300 mm - External dimensions W x D x H: 4850 x 1705 x 3880 mm - Usable volume: 11.6 m³ - Control system: S!MPAC with touch panel - Program execution with a good sensor as a cascade control - Temperature limiter - Signal column - Directly accessible, with grid rails - Exhaust air volume flow: 140 m³/min Cedpfxjy Tkfwe Ap Dohd - Electromagnetic door lock - Rated power: 180 kW - Connection: 214 kW!! - Weight: approx. 3500 kg - Documentation, CE declaration of conformity We would be happy to offer transport, installation, and training for your employees. Inspection in our machine hall is possible at any time by appointment. Furnace, oven, kilns, drying oven, industrial oven, drying cabinet, heat oven, heat cabinet, recirculating air oven, chamber furnace, heating oven, chamber recirculating air oven, annealing oven, tempering oven, recirculating air chamber oven, hardening oven, Vötsch oven, Weisstechnik, fusing oven, curing oven, post-curing of liquid crystal windows, CFRP support structure, oven for glass, glass tempering oven, glass fusing oven, glass hardening oven, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln.

Year of construction: 2021, condition: used, For inquiries regarding the device, Mr. Herden is at your service (available by phone at [phone number]). Optimas vacuum device SV 200 E incl. suction plate & other accessories / Year of manufacture: 2021 / in stock & immediately available / in excellent condition Price: €2,190.00 net / €2,606.10 gross - Weight: 21 kg - Load capacity: 200 kg - Vacuum pump: 16 m³ Features: - incl. suction plate & other accessories (see photos) In our warehouse, we have a very large selection of various devices that are immediately available! Mr. Herden (Tel. [phone number]) will gladly assist you. Upon request, we will also gladly provide you with a financing offer. We are an official Magni telescopic loader sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. Cjdpfez Ht Hlex Ap Dehd We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! Internal No.: 003674 = Further Information = Year of manufacture: 2021 Unladen weight: 21 kg Please contact Marius Herden for further information.

Condition: excellent (used), CATALOGUE NUMBER 7908 TECHNICAL DATA - tool diameter, Wescott chuck 0-20mm - max. hole depth 155mm - max. milling length 250mm - adjustment via drilling unit, forward/backward, right/left + angle - table adjustment, up/down - table swivel angle 0-45˚ - working table dimensions 600x320mm - four-point cutting head 16-22-25-32mm - 2 material clamps - motor power 2.2kW - dimensions L/W/H 1050x800x1250mm - weight 200kg ADVANTAGES - German made - very good condition Chjdpfx Apszr I H Ts Ded - eccentric clamps, 2 pieces - unpainted - used drilling machine Net price: 6500 PLN Net price: 1510 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: used, Year of construction: 2018, CNC-CONTROLLED MACHINING CENTER AUTHOR M 200 AUTHOR M200 3710x1620 Z250 - CNC-controlled machining center 1 Technical data Work area I.M.S. I.U. Work area X-axis 3710 mm * 146" * Work area Y-axis 1620 mm * 63¾" * Workpiece passage Y 1900 mm 74¾" Workpiece passage Z 250 mm 9¾ Workpiece length for pendulum machining 1700 + 1700 mm 67" + 67" Travel speed of the X-Y axes PRO-SPACE 56 m/min 184 ft/min Travel speed of the X-Y axes PRO-SPEED 78 m/min 256 ft/min * Distance covered by all tools in the X and Y direction; see the corresponding layout for further details. With a 5-axis motor, the dimension in Y increases to 1680mm (66"), for motor JQX or 1720mm (67½") for motor KS/KT max. Width of the loadable plate for horizontal drilling, electric spindle only oriented vertically, no central reference stops Installation data I.M.S. I.U. Installed power 23 - 28.5 KVA Electrical standard specifications 400 Voltage 50 Hz 3 phases Air consumption 450 Nl/min Compressed air consumption 4500 m³/h 2650 CFM Extraction air velocity 30 m/sec Extraction nozzle diameter 250 mm 9.8 Inches Noise level VSA * LAV * Drilling 72.2 74.6 Milling 74.3 80.7 Reference standard EN ISO 11202:1995* VSA = unloaded and without extraction * LAV = in operation with extraction Structure of the base body: The CNC machining center can be equipped flexibly with different milling units as well as multi-spindle drilling heads and many other units, up to dowel drilling units. In order to meet all requirements in the field of wood and plastic processing, as well as the demands of the users, each machine can be equipped with 3, 4 or 5 machining axes. The selection of drilling units extends to up to 34 drilling spindles with an integrated groove saw for the back panel groove or rabbet machining. The possibility of using this high-quality CNC machining center both as a cantilever table machine and with an aluminum grid table underscores the flexible range of applications and the performance of the M100 and M200 series. Powerful drilling heads, with individually selectable drilling spindles, max. RPM 8,000, and implemented in . technology, "the most robust drilling spindles on the market", with more than 1,000 maintenance-free application hours (lubrication interval of the drilling spindles). The possibility of being able to replace the drilling spindles within a very short time, "even without a technician", through the technology, without disassembling the drilling gear, sets a benchmark in the industry and is already standard on your machining center. Imagine your CNC machine performing hinge drilling in just one drilling operation (option), instead of the usual 3. An option that underscores our claim to offer you robust and high-performance units on our machines. Ideally and flexibly equipped for a wide variety of requirements. Whether manual or automatic, the FLEX cantilever work table allows vacuum cups and mechanical clamping elements, such as pneumatic clamps for window or curtain wall constructions (option), to be quickly, safely and cost-effectively adjusted to any material and clamping requirements, making your day-to-day work easier. Differently sized vacuum cups and clamping elements, which were developed in close cooperation with customers and users, are available as an option. Csdpfezvhkysx Ap Dehd

Condition: used, Stock-No. 1820 LANCELIN cube-dicer granule size 4x4x3 mm Typ BG 200 Capacity up 600 kg/h depending input material Drive 7,5 kW type L 212 - 200 mm Chodeb Ev Sfjpfx Ap Djd ready for trials, ex our workshop Wuppertal Germany. You´re welcome

Condition: good (used), pneumatic power chuck Manufacturer: Forkardt Type: UVE 200 - 50 - J5 KKG 5 Bolt circle diameter: 105 mm Taper: 80 mm Overall diameter: 280 mm Diameter of hollow spindle: 50 mm Overall height with jaws: 200 mm Chsdpfsdm Htpjx Ap Ded Weight: 47.5 kg

Condition: used, Circle cutter Chodpfjcxqbgsx Ap Ded Model MK 5 for diameters from 50 to 200 mm

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, PTC JTR-H hot water unit 140°C, steam 140°C/32 bar, and high-pressure steam 150°C/200 bar (only for the 350 bar version). Trailer similar, but not a Dynajet, Oertzen, Falch, DIBO, etc. - Single-axle trailer on a hot-dip galvanized frame with support leg and wheel, parking brake, automatic reversing gear, support feet, tail lights, and reflectors, drawbar for a 50 mm coupling, 13" tires, and ABS. Chedpfx Aofdvkzop Djd The following hot water models with 1 burner are available: JTR-H 21/200 | 21 l/min. at 200 bar | Engine: Kohler KDW 702, 12.6 kW JTR-H 23/350 | 23 l/min. at 350 bar | Engine: Kohler KDW 1404, 26 kW JTR-H 30/500 | 30 l/min. at 500 bar | Engine: Kohler KDW 2204, 37.5 kW The following high-pressure steam hot water models with 2 burners are available: JTR-H 23/350 | 23 l/min. at 350 bar | Engine: Kohler KDW 1404, 26 kW - Dimensions: 3,370 x 1,650 x 1,530 - Unladen weight: approx. 850 kg - High-pressure pump: Comet RW/TW Premium - HD hose reel: manual with max. 50 m of 3/8" hose (included) - Water supply hose reel: manual with 35 m of 3/4" hose - Water tank: 600 l - Diesel tank: 75 l - Anti-limescale pump with tank - 75 kW burner - Options and accessories available upon request.

Condition: used, Glasbeek Finish Gas Chamber Furnace, Type 003.05 Manufacturer: Glasbeek Finish Type: Gas Chamber Furnace Heating Medium: Natural gas Type 003.05 Includes loading cart Maximum temperature: 200 °C Burner type: Forced draft burner Manufacturer: Dreizler Type: M 06.2-95 Type: Forced draft burner Modulating operation Burner output: 40-110 kW Gas family: Natural gas Category: 12L Connection pressure: max. 100 mbar Power connection: 220/230V / 50 Hz Motor power: 0.27 kW Electrical power consumption: 0.6 kW Combustion chamber pressure: 1.6 mbar Burner number: 0201756 Year of manufacture: 2002 Dimensions Internal dimensions approx. W1900mm x D2950mm x H1800mm External dimensions approx. W2530mm x D3300mm x H2800mm Chsdpfx Aod Spx Dep Djd You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Bosch Turbo Scara SR6 Articulated Arm Robot The SR6/SR8 robot system consists of robust robot mechanics with four freely programmable axes. Thanks to its high speed and payload capacity (up to 8 kg), the robot is ideally suited for assembly work and fast pick & place operations. The TurboScara SR6 and SR8 are articulated arm robots (Scara robots) with four axes and the following advantages: • Minimal cycle time with maximum precision • Large working area and various stroke lengths • Defined mechanical interfaces • PC control with a wide range of communication options • Complies with international standards • Brushless drive technology reduces repairs • Integrated user installation, optional: gripper for connecting a tool connector • Integration of safety technology (safety class 3) as standard • User power supply (24 V) in the control cabinet • The BAPS programming language is easy to learn and enables the creation of clear and understandable programs; new with BAPSplus: graphical programming interface • Expandable via compact and flexible input/output modules: B~IO modules or decentralized CAN-I/O modules • Expandable via the VTS02 solenoid valve system with CAN connection for time-saving installation Chedpshtrdcofx Ap Dod Technical data: Nominal load: 2 kg Maximum load: 8 kg Nominal moment of inertia: (axis 4) 500 kgcm² Maximum moment of inertia: (axis 4) 1000 kgcm² Horizontal force: continuous/max. 60/150 N Vertical force: continuous/max. 200/300 N Torque: (axis 4) continuous/max 5/10 Nm Weight: 48.5 kg Maximum speeds SR6 Axis 1+2: 5.9 m/s Axis 1: 350 °/s Axis 2: 480 °/s Axis 3: (∅20 mm) 1600 mm/s Axis 3: (∅25 mm) 1200 mm/s Axis 4: 1200 °/s Cycle time (cycle 25-300-25): < 450 ms Controller consisting of the following components: Rexroth / MA4/200-7301-M / Robot Controller Module Rexroth RH04.0S You can find more new and used items in our shop! International shipping costs on request!

Condition: used, Year of construction: 2017, Dimensions (L/W/H) 2.645 x 900 x 2.130 mm Filter capacity 14,5 m² Number of dust containers 3 St. Chedpoz I Uc Djfx Ap Dsd Weight ca. 500 kg 200 mm

Condition: excellent (used), Year of construction: 2007, operating hours: 5,500 h, functionality: fully functional, turning length: 1,545 mm, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, total height: 2,600 mm, total length: 5,200 mm, total width: 2,550 mm, overall weight: 14,000 kg, Equipment: documentation/manual, Multi-Tasking Machining in a Single Machine Setup Sub spindle for overtaking with full C-Axis 0,001 Degrees 5500 Cutting hours ! The INTEGREX IV series can finish all machining processes. High speed, advanced milling spindle that can tilt up to 240 degrees swiveling. Lower turret with rotary tool spindle so livew tooling Chip conveyor with coolant and 15 Bar iKZ Double chuck KNCS-N 210-53 SMW Autoblock MAZAK Flex -GL150F Gantry Loader Gripping range 200 x 120 length x 15 Kg Chodpfx Aoz Ar R Dep Ded Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1545mm B Axis: 270° Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:5000Rpm Subspindle bore: 65mm Subspindle power: 18.5kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm Length: 5200mm Width: 2550mm Height: 2600mm Weight: 14000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1974, machine/vehicle number: 5470, stroke length: 250 mm, throat depth: 300 mm, table height: 800 mm, overall weight: 14,000 kg, total length: 3,500 mm, total width: 2,000 mm, total height: 3,550 mm, input voltage: 380 V, input frequency: 50 Hz, pressing force: 200 t, clearance between the columns: 2,550 mm, distance table to ram: 500 mm, ram plate length: 3,000 mm, table length: 3,000 mm, table width: 250 mm, Equipment: documentation/manual, Force: 2000 kN Working length: 3000 mm Chjdpezzxdusfx Ap Ded Distance between uprights: 2550 mm Stroke: 250 mm Distance table – ram: 500 mm Gap: 300 mm Table width: 250 mm

Condition: good (used), operating hours: 1,675 h, fuel type: diesel, Year of manufacture: 2019 Year of construction: 2019 Drive: Wheel GVW: 10.050 kg Mast: articulated arm Working height: 2.000 cm CE mark: yes Technical condition: very good Visual appearance: good Manitou 200 ATJ | Year 2019 | 1,400 hours Very clean Manitou 200 ATJ from 2019, with only 1,400 operating hours. A well-maintained articulated boom lift offering an excellent combination of reach, manoeuvrability and versatility. The 200 ATJ is a popular model within the Manitou range and is suitable for a wide variety of applications, including construction, maintenance, installation and industrial work. The articulated boom provides excellent flexibility, allowing the operator to work over obstacles and reach areas that are difficult to access with a conventional lift. With only 1,400 operating hours, the machine has seen relatively little use for its age. It is in very good condition and is an attractive machine for both professional users and traders. Specifications: Codpezz Nf Asfx Ap Dshd Make/type: Manitou 200 ATJ Year: 2019 Hours: 1,400 Very good condition Articulated boom lift Highly versatile Ready for immediate use A very clean Manitou 200 ATJ with a low number of operating hours, ready for its next owner. Call us directly for more information or to arrange a viewing!

Condition: used, FEUTRON Temperature Test Chamber / Climate Simulation Chamber Feutron 3416/16-Ex / TPK 200 Temperature range: -75 °C to +150 °C Water-cooled cascade refrigeration system For sale is a used temperature test chamber from the manufacturer Feutron Klimasimulation GmbH. The temperature test chamber is suitable for temperature tests, environmental simulation, material testing, quality assurance, electronics and component testing, as well as development, aging, and stress tests. Technical data: Manufacturer: Feutron Klimasimulation GmbH Type: 3416/16-Ex Series: TPK 200 Device type: Temperature test chamber Test chamber volume: 280 liters Temperature range: -75 °C to +150 °C Temperature deviation over time: ≤ ±0.5 K Temperature change rate: Heating: up to approx. 3.0 K/min on average Cooling: up to approx. 1.0 K/min on average Test chamber material: Stainless steel, material no. 1.4301 Test chamber insulation: CFC-free multi-layer insulation Number of shelves: 3 Lighting: 50 W Refrigeration system: Water-cooled semi-hermetic cascade system Refrigerant 1: R507 Refrigerant quantity: 2.5 kg Refrigerant 2: R23 Refrigerant quantity: 0.5 kg Cooling water connection: Cooling water pressure: min. approx. 2.0 bar / max. 6.0 bar Max. cooling water temperature inlet: approx. 18 °C Cooling water temperature outlet: approx. 30 °C Cooling water consumption on average: approx. 0.3 m³/h Power connection: 400 V / 3/N/PE AC / 50 Hz Max. simultaneous power consumption: 5.6 kW Fuse: 3 × 16 A, characteristic C Protection class: IP20 Codsz Hl Dvspfx Ap Dshd Feedthroughs: 1 × Ø 75 mm with cover cap 2 × Ø 75 mm on the side 1 × Ø 100 mm on the side Dimensions: approx. 1,500 × 1,075 × 2,140 mm (W × D × H) Weight: approx. 680 kg Equipment: Programmable Feutron control system LCD display Program and manual operation Up to 20 programs can be stored RS-232 interface Temperature monitoring 3 stainless steel shelves Test chamber lighting Observation window Several feedthroughs for test specimens Compressed air connection Cooling water supply and return Additional temperature controller Accessories according to images Areas of application: Temperature testing Environmental simulation Material testing Electronics testing Component testing Quality assurance Research and development Lifetime testing Aging and stress tests Condition: Used Device starts Control system and display are active Optical condition according to images Scope of delivery: 1 × Feutron 3416/16-Ex temperature test chamber 3 × stainless steel shelves Fan / accessories according to images Documentation according to images The table shown in the photos and other items not explicitly mentioned are not part of the sale. Shipping or freight transport is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, functionality: fully functional, Year of construction: 2012, load capacity: 2,000 kg, fuel type: electric, fork length: 1,150 mm, empty load weight: 320 kg, total length: 1,750 mm, drive type: Elektro, construction width: 750 mm, Low-lift pallet truck Load center: 600 Fork width: 185 mm Fork thickness: 60 mm Condition: Ready for use and fully functional Technical condition: very good Battery voltage: 24V Chodpfoz Evxnex Ap Dod Battery capacity: 160Ah Description: In addition to this Armanni model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Lease-purchase and financing options at favorable terms are always possible for us. We would also be happy to buy your used equipment outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this SL PESATORE 200/200. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We would also be happy to offer your vehicle for consignment sale. Electronic weighing system

Condition: used, Year of construction: 2005, Serial Number 177554 YOM 2005 Mazatrol 640m Control EIA & Mazatrol Programming 30 Tool Magazine Cedpfx Apszilp Tj Dohd CAT Tooling 4th Axis Swarf Conveyor Mazak Tool length measuring unit Spindle thru coolant UK Buyers - Price £42,000 +VAT Carriage/delivery is additional

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: 0-250-17-2346, functionality: fully functional, travel distance X-axis: 4,300 mm, travel distance Y-axis: 2,250 mm, travel distance Z-axis: 300 mm, number of axes: 4, spindle speed (max.): 24,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 4,300 mm Travel range, Y-axis: 2,250 mm Travel range, Z-axis: approx. 300 mm Main spindle Power: 10 kW Tool interface: HSK-F63 Spindle speed, max.: 24,000 rpm Axis configuration Controlled CNC axes: 4 Interpolating C-axis Servo-controlled Z-axis Tool changer Number of positions: 14 Tool holder: HSK-F63 Drilling unit Number of drilling spindles: 12, vertical Integrated groove saw Vacuum system Vacuum pumps: 3 x Becker MM1322 AV Total air flow: approx. 300 m³/h MACHINE DETAILS CNC control Version: WoodWOP 6 Beckhoff Industrial PC Beckhoff TwinCAT CNC Bosch Rexroth IndraDrive Digital Servo Drives SERCOS Motion Control Supply voltage: 415 V Frequency: 50 Hz Phases: 3 Full-load current: 61 A Main fuse: 80 A Control voltage: 24 VDC EQUIPMENT Matrix vacuum table 10 vacuum zones Heavy-duty gantry construction Chjdpfx Aszld Iyjp Dsd Automatic central lubrication system Twin extraction hoods with automatic positioning

Condition: used, Year of construction: 1962, pressure 025 t throat 200 mm stroke 8 - 80 mm no. of strokes 180 /min distance table/ram, max. stroke up, adjustment up 330 mm table surface area 550 x 400 mm hole in the table 60 mm table height over floor 800 mm passage to the back 200 mm ram surface 355 x 220 mm ram adjustment 50 mm power requirement 2,7 kW weight 2,5 t dimensions (WxDxH) 1,2 x 1,8 x 2,4 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) Cedpfjzrprqex Ap Dehd with motor, pneumatic clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, inclineable, manual central lubrication, two-hand and foot operation