Used Akv for sale (44)

Year of construction: 2017, Condition: excellent (used), coil width: 1.650 mm coil weight: 15 t stroke: 600 mm Fazthmar year: unknown / overhauled in 2017

Year of construction: 1989, Condition: good (used), Technische Daten / technical details: Decoiler coils max. width: 1270 mm coil thickness: 0,40 - 3,0 mm max. coil weight: 12 to diameter coil inside decoiler: 500 mm diameter coil outside decoiler: 1500 mm U2Z9Vt0Z coil lift truck: 12 to Speed: 0 - 65 m/min. Decoiler: Coils max. width: 1270 mm coil thickness: 0,40 - 3,0 mm max. coil weight: 12 to Line consisting of: Coil lift truck decoiler strip shear strip pit Recoiler Turnstile 2-arm technical documentation available overall good condition The seller is not liable for writing or data transmission errors. The machine is in appearance, technique and wear according to the age; used machines are sold without any warranty.

Year of construction: 2017, Condition: excellent (used), coil width: 1.650 mm coil weight: 15 t stroke: 600 mm Yxhxxc year: unknown / overhauled in 2017

Condition: used, Year of construction: 1991, Used machine Year of construction 1991 Equipment and technical data: Dqtc2F Edge banding machine for pre-coated edge material High-performance hot air blower Electromagnetic roller cutter Hebrock system edge trimmer End trimming: Trimming module for flush cutting the front edge overhang edge overhang Feed: 3-roller system Delivery on both sides Attachment trolley, mobile max. edge thickness approx. 1 mm max. workpiece height approx. 50 mm min. Workpiece length approx. 170 mm min. Workpiece width approx. 50 mm Feed rate approx. 4 m/min. Ready for operation: approx. 1 minute Dimensions 1730 x 690 x1240 mm Weight approx. 115 kg Availability: short term Storage location: Hochheim

Condition: excellent (used), Year of construction: 2012, operating hours: 730 h, Hebrock AKV3005DK-F edge banding machine with sweeping, corner copying and two scraper blades. Very well maintained machine from a small business in excellent condition. Touch screen interface with PLC control for easy operation of the machine, 12 operating programs can be saved. Edge thickness roll approx. 0.4 - 3mm Workpiece height approx. 8 - 53mm Feed rate approx. 10m/min Noise protection hood Extendable workpiece support, special equipment extendable by 950mm Suction connection 80 +140mm Aggregates: Quick-change basin with glue outlet, there are two glue basins, both of which are included in the scope of delivery (1 basin was used for EVA glue and one for PU glue), the PU glue basin is practically as good as new, was only purchased for one job. Top pressure manual adjustment with SIKO counter Cudufvqp Inlet ruler manual adjustment with SIKO counter Edge thickness manual adjustment with SIKO counter Milling with Leitz Whispercut slide cutters, still sharp Gluing unit with automatic edge feed for rolls up to 3mm Pressure zone with 4 rollers cross-cut saw Integrated collection container for edge pieces Combination milling unit, R2 with pneumatic adjustment between thin and thick edge Corner rounding cutter R2, pneumatically adjustable between thin and thick edge The profile trimming unit can also be used for the shelf program, i.e. only the straight edge is rounded and not the corners Radius scraper R2, pneumatically retractable Glue joint scraper, pneumatically engageable Hood lock CE mark Operating instructions A video of the machine in operation can be sent on request. All inserts of the milling units and the scraper blades have been renewed or turned, saws have been sharpened. The machine is therefore ready for immediate use. Only the slide milling cutters (Whispercut) have not been renewed, but are still sharp. Paint damage repaired. The Hebrock AKV series is the predecessor of the current K series. Machine has only approx. 730 operating hours (glue basin switched on), but the frequency converters were only switched on for approx. 455 operating hours. Machine is in very good condition, see original photos. Dimensions of the machine approx. 5000 x 1400 x 1550mm (LxWxH) Weight approx. 1550kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Condition: excellent (used), Year of construction: 2004, Gebr. Hebrock edge banding machine with joining unit and spraying device and PLC Edge banding machine, right-hand version Year of construction 2004 Equipment and technical data: max. edge thickness 3 mm with preparation for change basin min./max. workpiece thickness 8-60 mm Feed speed approx. 10 m/min Ready for operation approx. 5 min. min. Workpiece length 190 mm min. Workpiece width 80 mm Cglspok7Qe Joint milling unit with 2 milling heads with SPS control Glue basin with contact roller pressure zone cross-cut shears Cross-cut saw Combination trimming unit flush/bevel/radius pneumatically adjustable 2- Trimming station Corner copying unit Surface scraper, short version Radius scraper Spraying device Dimensions approx. 4700 x 1200 x 1530 mm Weight approx. 1150 kg Location: ex stock 54634 Bitburg - immediately available -

Year of construction: 2012, Condition: used, Edgebander HEBROCK AKV 3006 DK FS maximum edge thickness 3/8 mm min/max. workpiece thickness 10/40 mm min. workpiece length approximately 200 mm min. workpiece width approx. 80 mm feed speed about 10 m/Min. ready in about 6 minutes. maximum power consumption 12 kW electrical connection 400 V / 3 Ph / 50 Hz Pre-mill Glue unit Pressure roller Chopping saw Milling unit Milling unit Corner rounder Radius scraper Flat scraper Cleaning unit Dimensions (length x width x height) 5250x1445x1600 mm, weight 1550kg - Year: 2012 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Zxyxlpybg Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Year of construction: 1994, Condition: ready for operation (used), A Hebrock edge milling machine is available. Workpiece height range: 10mm-50mm, max. edge thickness: 1mm, min. workpiece width: 50mm, min. workpiece length: 170mm, feed speed: 4m/min, connected load: 3kW. Machine dimensions X/Y/Z: approx. 1750mm/700mm/1250mm, weight: approx. 120kg. On-site inspection is possible. Dq3Zbx

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, machine/vehicle number: 1773, TOP" condition Machine can be inspected and tested in use at the customer's premises Regular maintenance with proof 2 tes hot melt adhesive tanks Touch screen interface with PLC control Glue application to the edge of the workpiece with glue roller Heating time approx. 6 minutes Max. glue thickness 3 mm Manually adjustable infeed guide Joining unit with 2 trimming units incl. DIA tool D = 100 mm H = 44 mm Pre-cutting shears up to 3 mm Snipping unit Combination trimming unit flush/bevel/radius pneu. adjustable Corner rounding unit pneu. adjustable Cvtiu99Ggw Surface scraper Buffing unit Feed speed 10 m/min Extendable workpiece support Dimensions 4700 x 1445 x 1600 mm Weight approx. 1250 kg Total power requirement 13.8 Kw min. Workpiece thickness 8 mm max. workpiece thickness 60 mm min. Workpiece width 80 mm min. Workpiece length 150 mm

Condition: used, Year of construction: 2010, Used machine Edge banding machine right-hand version Year of construction 2010 Equipment and technical data: max. edge thickness 3 mm with preparation for interchangeable basins min./max. workpiece thickness 8-60 mm Feed speed approx. 10 m/min Ready for operation approx. 5 min. min. Workpiece length 190 mm min. Workpiece width 80 mm Joint milling unit with 2 milling heads with PLC control (incl. touch screen) Glue basin with contact roller pressure zone cross-cut shears Cross-cut saw Combination trimming unit flush/bevel/radius pneumatically adjustable Corner copying unit Surface scraper, short version Dimensions approx. 4700 x 1200 x 1530 mm Weight approx. 1150 kg Availability: short term Storage location: Flörsheim Dpr9Wb

Condition: used, Year of construction: 2014, Edgeband thickness max: 8 mm Panel thickness max: 45 mm Thickness of coiled edgeband max: 3 mm Workpiece length min: 220 mm Workpiece width min: 90 mm Feedrate max: 10 m/min Zero joint: Hot air Glue system granulate: glue pot above feeding chain Spraying device: Yes Premilling unit: Yes Trimming saw: 1 motor Flush/radius/chamfer milling units: 2 Corner rounding unit: 1 motor Scraper unit: Profile scraper, Flat scraper Aggregates actuated by control: pneumatic Type: right-side machine Machine length: 5.000 mm Declaration of CE-conformity: Yes Conformity marking: CE mark Total connection: 15,8 kW Weight: 1.500 kg Dq78Fr

Condition: used, No. 04454 Edge banding machine HEBROCK AKV 2000 DK Dq3Hlz Used Hot-cold process, one-sided right Workpiece width min. 90 mm Workpiece thickness 10 - 50 mm Workpiece length min. 260 mm Edge material thickness 0.5 - 5 mm Edge material height max. 55 mm Edge material length for fixed dimensions min. 350 mm Edge material protrusion top and bottom max. 2.5 mm Feed rate approx. 11 m/min Quick-melt glue pot with driven application roller Adhesive type: All adhesives suitable for the hot/cold process Frequency converter for cross-cut saw and milling motor Cross-cut saw unit, approx. 18000 rpm, saw D 100 mm Milling unit, approx. 18000 rpm, carbide insert milling cutter 50 x 12 x 0.16, Z4 or radius milling head R = 2.5 mm Chamfer angle: 0° - 8°, 15°, 22° and 30° Motor power with 2 units: 4 x 0.7 kW Motor power with 1 unit: 2 x 0.6 kW Chip extraction: 0.3 kW, air volume approx. 10 l/min, pressure 1.5 kPa Transport dimensions approx. 2500 x 1000 x 1500 mm LWH Weight approx. 700 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical data, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Condition: good (used), Year of construction: 2013, with hot melt adhesive specification for edge thickness up to 3 mm with joint trimming unit with slide tools with SPS control max. workpiece thickness 8-60 mm equipped with pneumatic milling adjustment (straight radius) milling station copy trimming unit surface scraper Radius scraper E8Dnrznyv with 2 glue basins with glue outlet with grooving saw on the side with lift-out with Airtronicsystem

Condition: used, Year of construction: 1994, for pre-coated edges including a lot of edge material with outriggers on both sides end cap station 3-roller feed used, good condition Make Hebrock Type AKV-83 Year of construction 1994 Dq737R Edge band thickness 1.0 mm Workpiece height max. 50 mm Workpiece width min. 50 mm Workpiece length min. 170 mm Space requirement approx. 1700 mm x 690 mm x 500 mm Storage location 97447 Gerolzhofen, freely loaded, unpacked Handover in the current condition as seen, without guarantee and guarantee

Condition: used, Year of construction: 2018, Kantenanleimmaschine AKV 3006 DK - F mit Fügefräsaggregat inklusive DIA - Werkzeuge Fügestärke bis 40 mm Werkstückdickebis 3 mm Kombifrässtation Radius R 2,5 mmTechnische Beschreibungmit Schmelzkleberangabe an das Werkstück für Kantenmaterial bis 3 mm60 mm Werkstückdicke ohne Fügeaggregat, 40 mm Werkstückdicke mit Fügeaggregat,wartungsfreies, beschichtetes Leimbecken, HF - Kappstation ( 16.000 U/min ) für vorderen und hinteren Kantenüberstand,HF - Frässtastion ( 16.000 U/min ) mit Wechselplattenfräser ( Kombiausführung ) und Fräserfeineineinstellung von der Bedienerseite,Freiplätze für zusätzliche Bearbeitungsaggregate ( System Hebrock ), Vorschub ca. 10 m/min,Schnitttiefeneinstellung der Kappsäge,Signallampe für Werkstückfolge, robuster Kettenantrieb, ergonomisch angeordnetes Bedienpult,Doppelrollenoberdruckbalken,Aggregatesichtfenster von der Maschinenrück- und Bedienerseite, SPS - Steuerung inklusive TouchscreenTechnisch Daten:- Vorschubgeschwindigkeit 10 m / Min.- Plattenstärken von 8 - 40 mm- Gewicht: je nach Ausstattung ca. 1550 kg - Abmessungen ( L x B x H ) 5250 x 1445 x 1600 mm 2 - Punkt - Pneumatische Fräserverstellung 1 Stk Umschaltung Radius – Bündig/Fase für die Kombifrässtationen Das Umstellen ob Fase oder Bündig erfolgt manuell durch das umlegen der Anschlagklappe in der Maschine Putzstation ( Schwabbel) 1 Stk Eckenabrundfräse 1 Stk inkl. Kombiwerkzeug und pneumatischer Einstellung Fase/Radius maximale Werkstückdicke 40 mmMindestwerkstücklänge 300 mm Radius R 2,0 mm Radiusziehklinge 1 Stk inkl. pneumatischer Aushubvorrichtung Radius R 2,0 mm Flächenziehklinge 1 Stk mit pneumatischer Einsatzsteuerung Leimstationwechelsystem incl. 2tes Leimbecken und Kleberauslauf nach unten 1 Stk für schnellen Farbwechsel Nutsägeaggregat horizontal in die Kante 1 Stk inkl. pneumatischer Aushubvorrichtung und Nutwerkzeug Absaugung des Fügeaggregats separat 1 Stk direkt an Fügeaggregat senkrecht nach oben d=80mm für eine optimale Absaugleistung ab AKV 3005 DK-F dringend empfohlen Kugellager für Eckenabrundfräser 24,1mm 1 Stk Kugellager für Eckenabrundfräser 24,2mm 1 Stk Wechselmotor 0,37 kW für Eckenabrundfräse 1 Stk mit Schnellwechselvorrichtung inkl. Radiusfräser R 1 Wechsel-Spindeln 1 Satz = 2 Stück 1 Stk 1 Satz Schnellwechselmotoren für die Längsbearbeitung oben und unten inkl. Werkzeug R 1 Lagerort: Lieferant Bdsuwwazge

Condition: used, Year of construction: 1991, Used machine Year of construction: 1991 max. workpiece height approx. 40 mm min. workpiece length approx. 250 mm min. Workpiece width approx. 70 mm Feed rate approx. 11 m/min. Ready for operation approx. 4-5 min. Power consumption approx. 11 kW with heated infeed ruler with quick-heating adhesive container Pneumatic roller capping up to 3 mm with cross-cut saw up to 5 mm edge thickness with routing station equipped with combined insert routers on request for radius, straight and chamfer routing Extension arm, can be folded down and extended to the front with chassis with integrated extraction system L x W x H 3600 x 1400 x 1200 mm Bluuecy7Uwc Weight approx. 670 kg Availability: at short notice Location: Hochheim Hochheim

Condition: used, Year of construction: 2016, Edgeband thickness max: 3 mm Panel thickness max: 40 mm Thickness of coiled edgeband max: 3 mm Workpiece width min: 70 mm Feedrate max: 10 m/min Glue system granulate: glue pot above feeding chain Quick-change glue pot: Yes Suitable for PUR glue: Yes Spraying device: Yes Premilling unit: Yes Trimming saw: 1 motor Flush/radius/chamfer milling units: 1 Dqm0Tl Nutfräsaggregat: Nutfräsaggregat starr Scraper unit: Flat scraper Free spaces for aggregates: 2 Aggregates actuated by control: pneumatic Type: right-side machine Machine length: 5.000 mm Control: SPS Declaration of CE-conformity: Yes Conformity marking: CE mark Total connection: 12,7 kW Weight: 1.900 kg

Condition: excellent (used), Year of construction: 1996, More info to follow... Dqv9Wx Available from February 2025

Condition: good (used), Year of construction: 2000, Swivel bending machine from Schröder - one of the best in this design, pretty much the same as Schechtl HA Ccavxjbzdf Machine has a working length of just over 2m Sheet thickness iron 2mm - aluminum a little more Optional additional rails or depth stop Test possible - loading no problem Weight approx. 1500 kg Same again in green as it is a little cheaper Optional offer as a set folding machine guillotine shears electric 2mm From the German manufacturer Stückmann & Hillen Cutting length 2m Depth stop and sheet support Cuts at the touch of a button and foot switch for €9900 as a set or bench alone €6400

Condition: used, Year of construction: 2007, machine/vehicle number: 1272, Laufrichtung der Platte : von Bediener nach links max. Anleimerstärke : 3 mm min. Werkstückdicke : 8 mm max. Werkstückdicke : 60 mm min. Werkstückbreite : 80 mm min. Werkstücklänge : 190 mm Vorschubgeschwindigkeit : 10 m/min Aufheizzeit : 6 min Fügeaggregat : Ja, mit 2 Fräsaggregaten Fügewerkzeug : Diamant- Fräser Durchmesser: 100 mm Höhe: 44 mmVerstellung des Einlauflineals : manuell Kappschere bis : 3 mm Einzelzuführung der Kante : möglich Beleimung : Leimkontaktwalze Kappsäge : Ja Kombiaggregat Bündig/Fase/Radius : pneumatisch zustellbar Abrundaggregat : pneumatisch zustellbar Flachziehklinge : Ja, tastend Stk Aggregatenanzeige : am Display Dpnyth Steuerungsart : SPS Streckensteuerung Bedienung : Touch-Screen Ausziehbare Rollenauflage : Ja Schutzhaube : Ja Gewicht ca. : 1250 kg Absaugdurchmesser : 80/120 mm

Condition: used, Year of construction: 2009, Beschreibung - Grundmaschine mit Fügen, Leimangabe, Andruck, Kappsäge und Kombifrässtation für 3 mm - Fügeaggregat inkl. DIA - Fräswerkzeuge - in Grundausstattung für bis zu 3 mm Kantenmaterial - mit Schmelzkleberangabe ans Werkstück - robuster Kettenantrieb - Oberes Bedienpult, schnelle Einstellung von der Bedienerseite - Doppelrollenoberdruck - Signallampe für Werkstückfolge - Schnellheizkleberbehälter wartungsfrei - Pneumatische Rollenkappung bis 3 mm Kantendicke - Hochfrequenz-Kappsäge - Hochfrequenz-Fräsen mit Wechselplattenplattenfräsern - für Radius-, Gerade - und Fasefräsen. - Werkstückabblasung - integrierter Auffangbehälter für Kantenmaterialabschnitte - Ausleger zur Vorderseite ausziehbar Technisch Daten: - Vorschubgeschwindigkeit 10 m / Min. - Plattenstärken von 8 - 40 mm - Gewicht: je nach Ausstattung ca. 1250 kg - Abmessungen ( L x B x H ) 4300 x 1445 x 1600 mm Aufrüstung auf 8mm Kantenstärke 1,00 mir pneum. Sägetiefeneinstellung separate pneumatische Fräserverstellung 1,00 vom Bedienpult steuerbar Eckenabrundfräse 1,00 - Eckenabrundfräse ( Kopieren ) mit Kombiwerkzeug und pneumatischer Einstellung ( Fase / Radius ) Bei Maschinen mit SPS weitere Einstellungen möglich Flächenziehklinge 1,00 mit pneumatischer Einsatzsteuerung Leimstationwechselsystem in Vorbereitung 1,00 ohne 2tes Leimbecken Sondereinlauflineal für überbelegte Platten 1,00 16 mm und 19 mm Stärke maximaler Überstand des Belages 8 mm minimale Werkstückdicke 8mm 1,00 maximale Werkstückdicke 50mm 1,00 bei maximaler Kantenstärke 3 mm ohne Einsatz Fügeaggregat ohne Einsatz Eckenabrundfräse Absaugung der Fügeaggregats intern 1,00 am Absaugverteiler der Maschine Kugellager für Eckenabrundfräser 24,1mm 1,00 Kugellager für Eckenabrundfräser 24,2mm 1,00 Dq7Anl Lagerort: Kunde

Condition: used, Year of construction: 1992, Used machine Year of construction: 1992 max. workpiece height approx. 40 mm min. workpiece length approx. 250 mm min. Workpiece width approx. 70 mm Feed rate approx. 11 m/min. Sx2Dhg Ready for operation approx. 4-5 min. Power consumption approx. 11 kW with rapid heating adhesive container Pneumatic roller capping up to 3 mm with cross-cut saw up to 5 mm edge thickness with routing station equipped with combined insert routers on request for radius, straight and chamfer routing Extension arm, can be folded down and extended to the front with chassis L x W x H 3600 x 1400 x 1200 mm Weight approx. 670 kg Availability: at short notice Location: Röllbach

Condition: used, Year of construction: 2008, Edgeband thickness max: 8 mm Panel thickness max: 40 mm Thickness of coiled edgeband max: 3 mm Workpiece length min: 300 mm Feedrate max: 10 m/min Glue system granulate: glue pot above feeding chain Premilling unit: Yes Trimming saw: 1 motor Flush/radius/chamfer milling units: 1 Corner rounding unit: 1 motor Scraper unit: Flat scraper Aggregates actuated by control: pneumatic Type: right-side machine Machine length: 4.300 mm Conformity marking: CE mark Total connection: 12,1 kW 9Eyqlv8Cw

Year of construction: 2010, Condition: used, sheet width max. 1500 mm plate thickness 2,5 mm serial number 150393 weight 1300 kg Mxsbb8 +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), Year of construction: 1998, machine/vehicle number: 10205, for pre-coated edgeband material, Edgeband material up to 1 mm thick, min. Workpiece width 50 mm, max. workpiece thickness 50 mm, min. Workpiece length approx. 170 mm, max. edge material height 50 mm, Ft3Tvbt High-performance hot air blower Heating power 3 kW, Cross-cut shears front and rear, 3-roller Hebrock special feed, DBP system Hebrock edge trimmer Table extension left and right, with underframe incl. chassis, Weight approx. 95 kg, ex location Seevetal, subject to prior sale, sold as seen in actual condition